timestamp primary key
Since TIMESTAMP values are adjusted by the current time zone
settings in both numeric and string contexts, using any
expressions involving TIMESTAMP values as a
(sub)partitioning function leads to undeterministic behavior of
partitioned tables. The effect may vary depending on a storage
engine, it can be either incorrect data being retrieved or
stored, or an assertion failure. The root cause of this is the
fact that the calculated partition ID may differ from a
previously calculated ID for the same data due to timezone
adjustments of the partitioning expression value.
Fixed by disabling any expressions involving TIMESTAMP values
to be used in partitioning functions with the follwing two
exceptions:
1. Creating or altering into a partitioned table that violates
the above rule is not allowed, but opening existing such tables
results in a warning rather than an error so that such tables
could be fixed.
2. UNIX_TIMESTAMP() is the only way to get a
timezone-independent value from a TIMESTAMP column, because it
returns the internal representation (a time_t value) of a
TIMESTAMP argument verbatim. So UNIX_TIMESTAMP(timestamp_column)
is allowed and should be used to fix existing tables if one
wants to use TIMESTAMP columns with partitioning.
mysql-test/r/partition_bug18198.result:
Corrected the error.
mysql-test/r/partition_error.result:
Corrected error texts.
Added test cases for bug #42849.
mysql-test/t/partition_bug18198.test:
Corrected error code.
mysql-test/t/partition_error.test:
Corrected error codes.
Added test cases for bug #42849.
sql/item.h:
Added is_timezone_dependent_processor() to Item.
sql/item_func.h:
Added has_timestamp_args() and the implementation of
is_timezone_dependent_processor() for Item_func.
sql/item_timefunc.h:
Added is_timezone_dependent_processor() to
Item_func_unix_timestamp.
sql/share/errmsg.txt:
Renamed ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR to
ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR to better reflect the
meaning. Adjusted the error message.
sql/sql_partition.cc:
Modified fix_fields_part_func() to walk through partitioning
expression tree with is_timezone_dependent_processor() and issue
a warning/error if it depends on the timezone settings.
Changed fix_fields_part_func() to a static function since it is
not used anywhere except sql_partition.cc
sql/sql_partition.h:
Removed the unneeded declaration of fix_fields_part_func()
since it is now a static function.
sql/sql_yacc.yy:
ER_CONST_EXPR_IN_PARTITION_FUNC_ERROR ->
ER_WRONG_EXPR_IN_PARTITION_FUNC_ERROR.
------------------------------------------------------------
revno: 2617.68.7
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-next-bg46044
timestamp: Thu 2009-08-27 10:22:17 +0400
message:
Fix for bug #46044 "MDL deadlock on LOCK TABLE + CREATE TABLE HIGH_PRIORITY
FOR UPDATE".
Deadlock occured when during execution of query to I_S we tried to open
a table or its .FRM in order to get information about it and had to wait
because we have encountered exclusive metadata lock on this table held by
a DDL operation from another connection which in its turn waited for some
resource currently owned by connection executing this I_S query.
For example, this might have happened if one under LOCK TABLES executed I_S
query targeted to particular table (which was not among locked) and also
concurrently tried to create this table using CREATE TABLE SELECT which
had to wait for one of tables locked by the first connection.
Another situation in which deadlock might have occured is when I_S query,
which was executed as part of transaction, tried to get information about
table which just has been dropped by concurrent DROP TABLES executed under
LOCK TABLES and this DROP TABLES for its completion also had to wait
transaction from the first connection.
This problem stemmed from the fact that opening of tables/.FRMs for I_S
filling is happening outside of connection's main MDL_context so code
which tries to detect deadlocks due to conflicting metadata locks doesn't
work in this case. Indeed, this led to deadlocks when during I_S filling
we tried to wait for conflicting metadata lock to go away, while its owner
was waiting for some resource held by connection executing I_S query.
This patch solves this problem by avoiding waiting in such situation.
Instead we skip this table and produce warning that information about
it was omitted from I_S due to concurrent DDL operation. We still wait
for conflicting metadata lock to go away when it is known that deadlock
is not possible (i.e. when connection executing I_S query does not hold
any metadata or table-level locks).
Basically, we apply our standard deadlock avoidance technique for metadata
locks to the process of filling of I_S tables but replace ER_LOCK_DEADLOCK
error with a warning.
Note that this change is supposed to be safe for 'mysqldump' since the
only its mode which is affected by this change is --single-transaction mode
is not safe in the presence of concurrent DDL anyway (and this fact is
documented). Other modes are unaffected because they either use
SHOW TABLES/SELECT * FROM I_S.TABLE_NAMES which do not take any metadata
locks in the process of I_S table filling and thus cannot skip tables or
execute I_S queries for tables which were previously locked by LOCK TABLES
(or in the presence of global read lock) which excludes possibility of
encountering conflicting metadata lock.
mysql-test/r/mdl_sync.result:
Added test for bug #46044 "MDL deadlock on LOCK TABLE + CREATE TABLE
HIGH_PRIORITY FOR UPDATE".
mysql-test/t/mdl_sync.test:
Added test for bug #46044 "MDL deadlock on LOCK TABLE + CREATE TABLE
HIGH_PRIORITY FOR UPDATE".
sql/mysql_priv.h:
Added a new flag for open_table() call which allows it to fail
with an error in cases when conflicting metadata lock is discovered
instead of waiting until this lock goes away.
sql/share/errmsg-utf8.txt:
Added error/warning message to be generated in cases when information
about table is omitted from I_S since there is conflicting metadata lock
on the table.
sql/share/errmsg.txt:
Added error/warning message to be generated in cases when information
about table is omitted from I_S since there is conflicting metadata lock
on the table.
sql/sql_base.cc:
Added a new flag for open_table() call which allows it to fail
with an error in cases when conflicting metadata lock is discovered
instead of waiting until this lock goes away.
sql/sql_show.cc:
When we are opening a table (or just .FRM) in order to fill I_S with
information about this table and encounter conflicting metadata lock
waiting for this lock to go away can lead to a deadlock in some
situations (under LOCK TABLES, within transaction, etc.). To avoid
these deadlocks we detect such situations and don't do waiting.
Instead, we skip table for which we have conflicting metadata lock,
thus omitting information about it from I_S table, and produce an
appropriate warning.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
------------------------------------------------------------
revno: 2630.2.13
revision-id: davi@mysql.com-20080612190452-cx6h7rm557bcq7sa
parent: davi@mysql.com-20080611124915-csejwrxfdga9upho
committer: Davi Arnaut <davi@mysql.com>
branch nick: 36785-6.0
timestamp: Thu 2008-06-12 16:04:52 -0300
message:
Bug#36785: Wrong error message when group_concat() exceeds max length
The problem is that when ER_CUT_VALUE_GROUP_CONCAT is elevated
to a error, the message does not get updated with the number of
cut lines when group_concat() exceeds max length.
The solution is to modify the warning message to be more meaningful
by giving the number of the line that was cut and to issue the warning
for each line that is cut. This approach is inline with how other
per-row truncated data warnings are issued avoids violating the warning
internal interface.
mysql-test/suite/sys_vars/r/group_concat_max_len_func.result:
Update result to reflect the new warning message
sql/share/errmsg.txt:
Update warning message ER_CUT_VALUE_GROUP_CONCAT.
BUILD-CMAKE:
WL#5161 : Documentation on how to build with CMake on Unix/Windows
BUILD/Makefile.am:
Add new file
BUILD/autorun.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
BUILD/choose_configure.sh:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
CMakeLists.txt:
WL#5161 : Rewrite top-level CMakeLists.txt.
Remove Windows specifics
- compiler flags handling moved to configure.cmake
- storage engine/plugin stuff moved into cmake/plugin.cmake
- copy docs
Makefile.am:
Added new files
client/CMakeLists.txt:
WL#5161 : Rewrite CMakeLists.txt to be platform-independent
Handle packagng (add INSTALL commands)
cmake/Makefile.am:
WL#5161 : use choose_configure instead of autotools configure script
(choose configure will call cmake if cmake is available)
cmake/abi_check.cmake:
Custom targets for abi_check (for cmake)
cmake/bison.cmake:
- Check bison availability
- Add RUN_BISON macro (used to create sql_yacc.cc and sql_yacc.h)
cmake/cat.cmake:
Add helper script to concatenate files.
cmake/character_sets.cmake:
Handle configuration parameters WITH_EXTRA_CHARSETS
cmake/check_minimal_version.cmake:
Helper script to check the minimum required version of cmake
cmake/configure.pl:
Add perl script to convert ./configure parameters for cmake
cmake/create_initial_db.cmake.in:
Add script helper to create initial database.
(on Windows, we pack initial db with the redistribution
package)
cmake/do_abi_check.cmake:
Perform abi check
cmake/dtrace.cmake:
Handle dtrace in CMake Build.
Check for dtrace availablility,
run dtrace -G on solaris in prelink step
cmake/dtrace_prelink.cmake:
Run dtrace -G on Solaris in pre-link step,
link the object it creates together with library or
executable
cmake/install_macros.cmake:
Helper macros for packaging
(install pdb on Windows, install symlinks on Unix)
cmake/make_dist.cmake.in:
"make dist" -
- pack autotools ./configure script with the source
(renamed to configure.am)
- pack bison output
cmake/merge_archives_unix.cmake.in:
script to merge static libraries on Unix
cmake/misc.cmake:
Build helper macros
- MERGE_STATIC_LIBS
We use it when building client library and embedded
(avoid recompilation)
- Convert source file paths to absolute names.
We use it in to locate files of a different project,
when the files need to be recompiled (e.g in embedded
several storage engines are recompiled with
-DEMBEDDED_LIBRARY)
cmake/mysql_version.cmake:
Extract version info from configure.in
Handle package names.
cmake/plugin.cmake:
Rewrote storage/mysql_storage_engine.cmake to handle
other types of plugins and do it in OS-independent manner.
cmake/readline.cmake:
Macros to handle WITH_READLINE/WITH_LIBEDIT parameters
cmake/ssl.cmake:
Add macros to handle WITH_SSL parameter.
cmake/stack_direction.c:
Helper to check stack direction.
cmake/zlib.cmake:
Add macros to handle WITH_ZLIB parameter
cmd-line-utils/libedit/CMakeLists.txt:
Build libedit with cmake.
cmd-line-utils/libedit/Makefile.am:
Add new file
cmd-line-utils/readline/CMakeLists.txt:
Build readline with CMake.
cmd-line-utils/readline/Makefile.am:
Add new file
config.h.cmake:
WL#5161 : Add config.h template for cmake
configure.cmake:
WL#5161 : Add platform tests ( for cmake)
configure.in:
Added new subdirectories
dbug/CMakeLists.txt:
WL#5161
extra/CMakeLists.txt:
WL#5161
extra/yassl/CMakeLists.txt:
WL#5161
extra/yassl/taocrypt/CMakeLists.txt:
WL#5161
include/Makefile.am:
Add new file
include/keycache.h:
remove configure-win.h and remove HUGE_PTR defined there.
include/my_global.h:
use my_config.h for Windows, not config-win.h anymore
include/my_pthread.h:
- Move thread_safe_increment from config-win.h to other headers
(config-win.h is not used anymore)
- Declare pthread_cancel on Windows (it is used in daemon_example)
include/my_sys.h:
Add malloc.h on Windows (we use -D_WIN32_LEAN_AND_MEAN now, and
with this define malloc.h is not included automatically via windows.h)
include/mysql/plugin.h:
Handle pure-C plugins with Microsoft compiler.
include/thr_alarm.h:
remove rf_SetTimer that used to be defined in config-win.h
Replace with UINT_PTR (we do not use config-win.h anymore
and typedef was needed in this single place only)
libmysql/CMakeLists.txt:
Avoid pointless recompilation of source files
in client library if possible. Merge static
libs (dbug, mysys) to create static client
library.
libmysqld/CMakeLists.txt:
Avoid pointless recompilation of source files
when building embedded. Instead, merge dbug and
mysys (and some other static libs) into embedded.
libmysqld/examples/CMakeLists.txt:
Embedded compilation on Unix
libmysqld/lib_sql.cc:
Do not define THD::clear_error() in lib_sql.cc
for embedded. Instead, use the same inline
definition from sql_class.h as in none-embedded
case (fixes duplicate symbol errors on Windows
and removes pointless #ifdef EMBEDDED)
man/CMakeLists.txt:
Install man files.
man/Makefile.am:
Add new file.
mysql-test/CMakeLists.txt:
Install mysql-test files
mysql-test/Makefile.am:
Add new files
mysql-test/lib/My/ConfigFactory.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/Find.pm:
the build configurations are now also available on Unix
Xcode on Mac uses the Release, RelwithDebinfo and Debug
subdirectories for executables. Earlier, build configurations
were available only on Windows.
mysql-test/lib/My/SafeProcess.pm:
Allow testing with mtr in out-of-source builds.
mysql-test/lib/My/SafeProcess/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysql-test/lib/My/SafeProcess/safe_kill_win.cc:
add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
mysql-test/lib/My/SafeProcess/safe_process_win.cc:
Add stdlib.h (to be able to compile with -DWIN32_LEAN_AND_MEAN)
define JOB_OBJECT_LIMIT_KILL_ON_JOB_CLOSE if not defined
(can happen using MinGW compiler that comes with old SDK)
mysql-test/mtr.out-of-source:
Allow testing with mtr in out-of-source builds.
mysql-test/mysql-test-run.pl:
Allow testing with mtr in out-of-source builds.
Use common find_plugin macro for Windows and unix.
mysql-test/t/fulltext_plugin.test:
This test can now run on Windows as well.
mysys/CMakeLists.txt:
Port CMakeLists.txt to Unix
mysys/my_create.c:
config-win.h is dead => NO_OPEN_3 is never defined.
mysys/my_getsystime.c:
config-win.h is dead => define OFFSET_TO_EPOCH where it is used.
mysys/my_winthread.c:
Add win32 pthread_cancel - used by daemon_example
mysys/mysys_priv.h:
config-win.h is dead => include <sys/stat.h> where it is used
fix prototype of my_win_(f)stat
plugin/daemon_example/CMakeLists.txt:
Compile daemon_example with CMake
plugin/daemon_example/Makefile.am:
Add new file
plugin/fulltext/CMakeLists.txt:
Compile full-text example with CMake
plugin/fulltext/Makefile.am:
Add new file.
plugin/semisync/CMakeLists.txt:
Fix semisync to use common macro for plugins.
regex/CMakeLists.txt:
Use absolute filenames, when adding regex library
(we recompile files in embedded, and want to locate
sources via GET_TARGET_PROPERTY( ... SOURCES ..))
regex/regex2.h:
Remove pointless typedef (produces error with MinGW compiler)
scripts/CMakeLists.txt:
Add configure/install for scripts
sql-bench/CMakeLists.txt:
install sql-bench files
sql-bench/Makefile.am:
Add new file
sql/CMakeLists.txt:
Port CmakeLists.txt to Unix
sql/nt_servc.cc:
compile server with -DWIN32_LEAN_AND_MEAN
sql/share/CMakeLists.txt:
Install charsets
sql/share/Makefile.am:
Add new file
sql/sql_builtin.cc.in:
Handle pure-C plugins on Windows.
sql/sql_class.h:
Use the same clear_error macro in embedded and not embedded.
Fixes pointless #ifdef and avoids duplicate symbols when linking
on Windows.
storage/Makefile.am:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
storage/archive/CMakeLists.txt:
Add names for static and dynamic plugin libraries.
Link archive with zlib
storage/blackhole/CMakeLists.txt:
Add names for static and dynamic storage
engine libraries
storage/csv/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/example/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/federated/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/heap/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/ibmdb2i/CMakeLists.txt:
Better port for ibmdb2i plugin
storage/innobase/CMakeLists.txt:
Run system checks.
Add names for static and dynamic storage engine
libraries.
storage/innobase/include/page0page.ic:
Fix compile error on OpenSolaris.
storage/myisam/CMakeLists.txt:
Port CmakeLists.txt to Unix
storage/myisammrg/CMakeLists.txt:
Add names for static and dynamic storage engine
libraries
storage/mysql_storage_engine.cmake:
storage/mysql_storage_engine.cmake => cmake/plugin.cmake
support-files/CMakeLists.txt:
Configure and install some files from support-files.
support-files/Makefile.am:
Add new file
tests/CMakeLists.txt:
In general case, mysqlclient library can be dependent
on C++ runtime(if it includes yassl and is not compiled
with gcc or MSVC)
unittest/mysys/CMakeLists.txt:
Add unit tests
unittest/mysys/Makefile.am:
Add new file
unittest/mytap/CMakeLists.txt:
Add library for unit tests
unittest/mytap/Makefile.am:
Add new file
unittest/mytap/tap.c:
fix function definitions to match declarations
win/create_def_file.js:
Fix link error with intel compiler (icl
defines of special label for exception handler)
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
When the query cache is disabled, the server shouldn't attempt to take the
query cache mutex.
By using the command line option --query_cache_type=0, the user can disable
(backport from mysql-pe)
mysql-test/t/query_cache_disabled-master.opt:
* added test case for bug38551
mysql-test/t/query_cache_disabled.test:
* added test case for bug38551
sql/set_var.cc:
* Added before-trigger to verify that query_cache_type wasn't turned off or on during
runtime.
sql/set_var.h:
* Changed order on how the enumeration is processed. By first projecting the
character representation of the variable to a temporary integer we can have
one function instead of two to check if the value is valid.
sql/share/errmsg-utf8.txt:
* Added error message for query cache disabled state
sql/sql_cache.cc:
* If the query cache is disabled at start up, shorten the execution path and avoid
grabbing the query cache mutex each time the invalidate interface methods are called.
sql/sql_cache.h:
* Added new methods to set the query cache into a disabled state.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
Post-push fix.
Problem: After the original bugfix, if a statement is unsafe,
binlog_format=mixed, and engine is statement-only, a warning was
generated and the statement executed. However, it is a fundamental
principle of binlogging that binlog_format=mixed should guarantee
correct logging, no compromise. So correct behavior is to generate
an error and don't execute the statement.
Fix: Generate error instead of warning.
Since issue_unsafe_warnings can only generate one error message,
this allows us to simplify the code a bit too:
decide_logging_format does not have to save the error code for
issue_unsafe_warnings
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
updated test:
- ER_BINLOG_UNSAFE_AND_STMT_ENGINE is now an error.
- added test for multiple types of unsafety
sql/share/errmsg.txt:
- Reformulated ER_BINLOG_UNSAFE_AND_STMT_ENGINE to reflect that it
is now an error, not a warning.
- Added "Reason for unsafeness" to ER_BINLOG_UNSAFE_STATEMENT and
ER_BINLOG_UNSAFE_AND_STMT_ENGINE.
sql/sql_class.cc:
In decide_logging_format:
- generate an error immediately in case 3, instead of scheduling a
warning to be generated later. also updated comments accordingly
- in case 7, there is only one unsafe warning error code now, so we
don't need to store it in binlog_unsafe_warning_flags
(see changes in sql_lex.h)
- fixed compilation warning in DBUG_PRINT
In issue_binlog_warning:
- moved array of error codes to sql_lex.h (so that they are
accessible also from decide_logging_format)
- simplified code after the first set of bits in
binlog_unsafe_warning_flags was removed
sql/sql_class.h:
- got rid of enum_binlog_stmt_warning. It's not needed anymore
since we only have one type of unsafe warning (one of them
turned into an error)
- updated comments accordingly
sql/sql_lex.cc:
added initialization of the array of error codes that has been
moved from THD::issue_unsafe_warnings to LEX.
sql/sql_lex.h:
Moved array of error codes from THD::issue_unsafe_warnings to LEX.
@ mysql-test/r/func_str.result
Adding tests
@ mysql-test/t/func_str.test
Adding tests
@ mysql-test/t/variables.test
Fixing error number
@ sql/item_create.cc
Allowing 2 and 3 arguments to format()
@ sql/item_strfunc.cc
Adding new formatting code.
@ sql/item_strfunc.h
Adding new contructors and "locale" member
@ sql/mysql_priv.h
Adding number formatting members into MY_LOCALE
@ sql/sql_locale.cc
Adding number formatting data into locale constants
@ sql/set_var.cc
Using new error message
@ sql/share/errmgs.txt
Adding new error message
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
But there is no Last_IO_Error reported.
On the master, if a binary log event is larger than max_allowed_packet,
ER_MASTER_FATAL_ERROR_READING_BINLOG and the specific reason of this error is
sent to a slave when it requests a dump from the master, thus leading
the I/O thread to stop.
On a slave, the I/O thread stops when receiving a packet larger than max_allowed_packet.
In both cases, however, there was no Last_IO_Error reported.
This patch adds code to report the Last_IO_Error and exact reason before stopping the
I/O thread and also reports the case the out memory pops up while
handling packets from the master.
sql/sql_repl.cc:
The master send the Specific reasons instead of "error reading log entry" to the slave which is requesting a dump.
if an fatal error is returned by read_log_event function.
Removed hard-coded error messages. All messages are now in
errmsg.txt
Also renamed enumeration value BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION to make the naming consistent
with BINLOG_STMT_UNSAFE_SYSTEM_VARIABLE.
sql/item_create.cc:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
sql/share/errmsg.txt:
Moved hard-coded strings from THD::issue_unsafe_warnings() to
errmsg.txt.
sql/sql_class.cc:
- Moved error messages to errmsg.txt.
- Updated comment above THD::issue_unsafe_warnings().
sql/sql_lex.h:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
sql/sql_yacc.yy:
Renamed BINLOG_STMT_UNSAFE_FUNCTION to
BINLOG_STMT_UNSAFE_SYSTEM_FUNCTION
Invalid (old?) table or database name in logs
Post push patch.
Bug was that a non partitioned table file was not
converted to system_charset, (due to table_name_len was not set).
Also missing DBUG_RETURN.
And Innodb adds quotes after calling the function,
so I added one more mode where explain_filename does not
add quotes. But it still appends the [sub]partition name
as a comment.
Also caught a minor quoting bug, the character '`' was
not quoted in the identifier. (so 'a`b' was quoted as `a`b`
and not `a``b`, this is mulitbyte characters aware.)
sql/mysql_priv.h:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Added an unquoted mode
sql/share/errmsg.txt:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Removed the quoting of identifier, only leaving the translated word.
sql/sql_table.cc:
Bug#32430: 'show innodb status' causes errors
Invalid (old?) table or database name in logs
Fixed quoting of '`'
Added DBUG_RETURN.
Corrected table_name_len.
Added unquoted mode.
when used with --tab
1) New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE).
mysqldump is updated to use this in --tab mode.
2) ESCAPED BY/ENCLOSED BY field parameters are documented as
accepting CHAR argument, however SELECT .. INTO OUTFILE
silently ignored rests of multisymbol arguments.
For the symmetrical behavior with LOAD DATA INFILE the
server has been modified to fail with the same error:
ERROR 42000: Field separator argument is not what is
expected; check the manual
3) Current LOAD DATA INFILE recognizes field/line separators
"as is" without converting from client charset to data
file charset. So, it is supposed, that input file of
LOAD DATA INFILE consists of data in one charset and
separators in other charset. For the compatibility with
that [buggy] behaviour SELECT INTO OUTFILE implementation
has been saved "as is" too, but the new warning message
has been added:
Non-ASCII separator arguments are not fully supported
This message warns on field/line separators that contain
non-ASCII symbols.
client/mysqldump.c:
mysqldump has been updated to call SELECT ... INTO OUTFILE
statement with a charset from the --default-charset command
line parameter.
mysql-test/r/mysqldump.result:
Added test case for bug #30946.
mysql-test/r/outfile_loaddata.result:
Added test case for bug #30946.
mysql-test/t/mysqldump.test:
Added test case for bug #30946.
mysql-test/t/outfile_loaddata.test:
Added test case for bug #30946.
sql/field.cc:
String conversion code has been moved from check_string_copy_error()
to convert_to_printable() for reuse.
sql/share/errmsg.txt:
New WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED message has been added.
sql/sql_class.cc:
The select_export::prepare() method has been modified to:
1) raise the ER_WRONG_FIELD_TERMINATORS error on multisymbol
ENCLOSED BY/ESCAPED BY field arguments like LOAD DATA INFILE;
2) warn with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message on non-ASCII field or line separators.
The select_export::send_data() merhod has been modified to
convert item data to output charset (see new SELECT INTO OUTFILE
syntax). By default the BINARY charset is used for backward
compatibility.
sql/sql_class.h:
The select_export::write_cs field added to keep output
charset.
sql/sql_load.cc:
mysql_load has been modified to warn on non-ASCII field or
line separators with a new WARN_NON_ASCII_SEPARATOR_NOT_IMPLEMENTED
message.
sql/sql_string.cc:
New global function has been added: convert_to_printable()
(common code has been moved from check_string_copy_error()).
sql/sql_string.h:
New String::is_ascii() method and new global convert_to_printable()
function have been added.
sql/sql_yacc.yy:
New syntax: added CHARACTER SET clause to the
SELECT ... INTO OUTFILE (to complement the same clause in
LOAD DATA INFILE). By default the BINARY charset is used for
backward compatibility.
it returns misleading 'table is full'
Innodb returns a misleading error message "table is full"
when the number of active concurrent transactions is greater
than 1024.
Fixed by adding errorcode "ER_TOO_MANY_CONCURRENT_TRXS" to the
error codes. Innodb should return HA_TOO_MANY_CONCURRENT_TRXS
to mysql which is then mapped to ER_TOO_MANY_CONCURRENT_TRXS
Note: testcase is not written as this was reproducible only by
changing innodb code.
extra/perror.c:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
include/my_base.h:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/ha_innodb.cc:
Return HA_ERR_TOO_MANY_CONCURRENT_TRXS to mysql server
sql/handler.cc:
Add error number and message for HA_ERR_TOO_MANY_CONCURRENT_TRXS
sql/share/errmsg.txt:
Add error message for ER_TOO_MANY_CONCURRENT_TRXS
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
or database name in logs
Problem was that InnoDB used filenam_to_tablename,
which do not handle partitions (due to the '#' in
the filename).
Solution is to add a new function for explaining
what the filename means: explain_filename.
It expands the database, table, partition and subpartition
parts and uses errmsg.txt for localization.
It also converts from my_charset_filename to system_charset_info
(i.e. human readable form for non ascii characters).
http://lists.mysql.com/commits/70370
2773 Mattias Jonsson 2009-03-25
It has three different output styles.
NOTE: This is the server side ONLY part (introducing the explain_filename
function). There will be a patch for InnoDB using this function to solve
the bug.
sql/mysql_priv.h:
Bug#32430:'show innodb status' causes errors Invalid (old?) table
or database name in logs
Added EXPLAIN_FILENAME_MAX_EXTRA_LENGTH, enum_explain_filename_mode
and explain_filename.
sql/share/errmsg.txt:
Bug#32430:'show innodb status' causes errors Invalid (old?) table
or database name in logs
Added localization names for Database, Table, Partition, Subpartition
Temporary and Renamed.
sql/sql_table.cc:
Bug#32430:'show innodb status' causes errors Invalid (old?) table
or database name in logs
Added explain_filename function for giving better information
to the user about a specific table/partitions file.
