TABLES IN INCORRECT ENGINE
PROBLEM:
CREATE/ALTER TABLE currently can move system tables like
mysql.db, user, host etc, to engines other than MyISAM. This is not
completely supported as of now, by mysqld. When some of system tables
like plugin, servers, event, func, *_priv, time_zone* are moved
to innodb, mysqld restart crashes. Currently system tables
can be moved to BLACKHOLE also!!!.
ANALYSIS:
The problem is that there is no check before creating or moving
a system table to some particular engine.
System tables are suppose to be residing in MyISAM. We can think
of restricting system tables to exist only in MyISAM. But, there could
be future needs of these system tables to be part of other engines
by design. For eg, NDB cluster expects some tables to be on innodb
or ndb engine. This calls for a solution, by which system
tables can be supported by any desired engine, with minimal effort.
FIX:
The solution provides a handlerton interface using which,
mysqld server can query particular storage engine handlerton for
system tables that it supports. This way each storage engine
layer can define their own system database and system tables.
The check_engine() function uses the new handlerton function
ha_check_if_supported_system_table() to check if db.tablename
provided in the DDL is supported by the SE.
Note: This fix has modified a test in help.test, which was moving
mysql.help_* to innodb. The primary intention of the test was not
to move them between engines.
(also 5.5+ solution for bug#11766879/bug#60106)
The valgrind warning was due to an unused 'new handler_add_index(...)'
which was never freed.
The error handling did not work (fails as in bug#11766879) and
the implementation was not as transparant as it could, therefore I
made it a bit simpler and more transparant to the underlying handlers.
This way it follows the api better and the error handling works and
is also now tested.
Also added a debug test to verify the error handling.
Improved according to Jon Olavs review:
Added class ha_partition_add_index.
Also added base class Sql_alloc to handler_add_index.
Update 3.
SECONDARY INDEX IN INNODB
The patches for Bug#11751388 and Bug#11784056 enabled concurrent
reads while creating secondary indexes in InnoDB. However, they
introduced a regression. This regression occured if ALTER TABLE
failed after the index had been added, for example during the
lock upgrade needed to update .FRM. If this happened, InnoDB
and the server got out of sync with regards to which indexes
actually existed. Therefore the patch for Bug#11815600 again
disabled concurrent reads.
This patch re-enables concurrent reads. The original regression
is fixed by splitting the ADD INDEX operation into two parts.
First the new index is created but not made active. This is
done while concurrent reads are allowed. The second part of
the operation makes the index active (or reverts the change).
This is done after lock upgrade, which prevents the original
regression.
In order to implement this change, the patch changes the storage
API for in-place index creation. handler::add_index() is split
into two functions, handler_add_index() and
handler::final_add_index(). The former for creating indexes without
making them visible and the latter for commiting (i.e. making
visible) new indexes or reverting the changes.
Large parts of this patch were written by Marko Mäkelä.
Test case added to innodb_mysql_lock.test.
Manual merge from mysql-5.1 into mysql-5.5.
Conflicts
=========
Text conflict in mysql-test/suite/rpl/t/rpl_row_until.test
Text conflict in sql/handler.h
Text conflict in storage/archive/ha_archive.cc
The LGPL license is used in some legacy code, and to
adhere to current licensing polity, we remove those
files that are no longer used, and reorganize the
remaining LGPL code so it will be GPL licensed from
now on.
Note: This patch only removed LGPL licensed files
in MySQL 5.5 and later, and is the third of a
set of patches to remove LGPL from all trees.
(See Bug# 11840513 for details)
The LGPL license is used in some legacy code, and to
adhere to current licensing polity, we remove those
files that are no longer used, and reorganize the
remaining LGPL code so it will be GPL licensed from
now on.
Note: This patch only removed LGPL licensed files
in MySQL 5.1, and is the second of a set of
patches to remove LGPL from all trees.
(See Bug# 11840513 for details)
When executing row-ordered-retrieval index merge,
the handler was cloned, but it used the wrong
memory root, so instead of allocating memory
on the thread/query's mem_root, it used the table's
mem_root, resulting in non released memory in the
table object, and was not freed until the table was
closed.
Solution was to ensure that memory used during cloning
of a handler was allocated from the correct memory root.
This was implemented by fixing handler::clone() to also
take a name argument, so it can be used with partitioning.
And in ha_partition only allocate the ha_partition's ref, and
call the original ha_partition partitions clone() and set at cloned
partitions.
Fix of .bzrignore on Windows with VS 2010
MAP 'REPAIR TABLE' TO RECREATE +ANALYZE FOR ENGINES NOT
SUPPORTING NATIVE REPAIR
Executing 'mysqlcheck --check-upgrade --auto-repair ...' will first issue
'CHECK TABLE FOR UPGRADE' for all tables in the database in order to check if the
tables are compatible with the current version of MySQL. Any tables that are
found incompatible are then upgraded using 'REPAIR TABLE'.
The problem was that some engines (e.g. InnoDB) do not support 'REPAIR TABLE'.
This caused any such tables to be left incompatible. As a result such tables were
not properly fixed by the mysql_upgrade tool.
This patch fixes the problem by first changing 'CHECK TABLE FOR UPGRADE' to return
a different error message if the engine does not support REPAIR. Instead of
"Table upgrade required. Please do "REPAIR TABLE ..." it will report
"Table rebuild required. Please do "ALTER TABLE ... FORCE ..."
Second, the patch changes mysqlcheck to do 'ALTER TABLE ... FORCE' instead of
'REPAIR TABLE' in these cases.
This patch also fixes 'ALTER TABLE ... FORCE' to actually rebuild the table.
This change should be reflected in the documentation. Before this patch,
'ALTER TABLE ... FORCE' was unused (See Bug#11746162)
Test case added to mysqlcheck.test
client/mysqlcheck.c:
Changed mysqlcheck to do 'ALTER TABLE ... FORCE' if
'CHECK TABLE FOR UPGRADE' reports ER_TABLE_NEEDS_REBUILD
and not ER_TABLE_NEEDS_UPGRADE.
mysql-test/r/mysqlcheck.result:
Added regression test.
mysql-test/std_data/bug47205.frm:
InnoDB 5.0 FRM which contains a varchar primary key using
utf8_general_ci. This is an incompatible FRM for 5.5.
mysql-test/t/mysqlcheck.test:
Added regression test.
sql/handler.h:
Added new HA_CAN_REPAIR flag.
sql/share/errmsg-utf8.txt:
Added new error message ER_TABLE_NEEDS_REBUILD
sql/sql_admin.cc:
Changed 'CHECK TABLE FOR UPDATE' to give ER_TABLE_NEEDS_REBUILD
instead of ER_TABLE_NEEDS_UPGRADE if the engine does not support
REPAIR (as indicated by the new HA_CAN_REPAIR flag).
sql/sql_lex.h:
Remove unused ALTER_FORCE flag.
sql/sql_yacc.yy:
Make sure ALTER TABLE ... FORCE recreates the table
by setting the ALTER_RECREATE flag as the ALTER_FORCE
flag was unused.
storage/archive/ha_archive.h:
Added new HA_CAN_REPAIR flag to Archive
storage/csv/ha_tina.h:
Added new HA_CAN_REPAIR flag to CSV
storage/federated/ha_federated.h:
Added new HA_CAN_REPAIR flag to Federated
storage/myisam/ha_myisam.cc:
Added new HA_CAN_REPAIR flag to MyISAM
that implement add_index
The problem was that ALTER TABLE blocked reads on an InnoDB table
while adding a secondary index, even if this was not needed. It is
only needed for the final step where the .frm file is updated.
The reason queries were blocked, was that ALTER TABLE upgraded the
metadata lock from MDL_SHARED_NO_WRITE (which blocks writes) to
MDL_EXCLUSIVE (which blocks all accesses) before index creation.
The way the server handles index creation, is that storage engines
publish their capabilities to the server and the server determines
which of the following three ways this can be handled: 1) build a
new version of the table; 2) change the existing table but with
exclusive metadata lock; 3) change the existing table but without
metadata lock upgrade.
For InnoDB and secondary index creation, option 3) should have been
selected. However this failed for two reasons. First, InnoDB did
not publish this capability properly.
Second, the ALTER TABLE code failed to made proper use of the
information supplied by the storage engine. A variable
need_lock_for_indexes was set accordingly, but was not later used.
This patch fixes this problem by only doing metadata lock upgrade
before index creation/deletion if this variable has been set.
This patch also changes some of the related terminology used
in the code. Specifically the use of "fast" and "online" with
respect to ALTER TABLE. "Fast" was used to indicate that an
ALTER TABLE operation could be done without involving a
temporary table. "Fast" has been renamed "in-place" to more
accurately describe the behavior.
"Online" meant that the operation could be done without taking
a table lock. However, in the current implementation writes
are always prohibited during ALTER TABLE and an exclusive
metadata lock is held while updating the .frm, so ALTER TABLE
is not completely online. This patch replaces "online" with
"in-place", with additional comments indicating if concurrent
reads are allowed during index creation/deletion or not.
An important part of this update of terminology is renaming
of the handler flags used by handlers to indicate if index
creation/deletion can be done in-place and if concurrent reads
are allowed. For example, the HA_ONLINE_ADD_INDEX_NO_WRITES
flag has been renamed to HA_INPLACE_ADD_INDEX_NO_READ_WRITE,
while HA_ONLINE_ADD_INDEX is now HA_INPLACE_ADD_INDEX_NO_WRITE.
Note that this is a rename to clarify current behavior, the
flag values have not changed and no flags have been removed or
added.
Test case added to innodb_mysql_sync.test.
It was possible to issue an ALTER TABLE ADD PRIMARY KEY on
an partitioned InnoDB table that failed and crashed the server.
The problem was that it succeeded to create the PK on at least
one partition, and then failed on a subsequent partition, due to
duplicate key violation. Since the partitions that already had added
the PK was not reverted all partitions was not consistent with the
table definition, which caused the crash.
The solution was to add a revert step to ha_partition::add_index()
that dropped the index for the already succeeded partitions, on failure.
mysql-test/r/partition.result:
updated result
mysql-test/t/partition.test:
Added test
sql/ha_partition.cc:
Only allow ADD/DROP flags in pairs, so that they can be reverted on failures.
If add_index() fails for a partition, revert (drop the index) for the previous
partitions.
sql/handler.h:
Added some extra info in a comment.
Bug#54678: InnoDB, TRUNCATE, ALTER, I_S SELECT, crash or deadlock
- Incompatible change: truncate no longer resorts to a row by
row delete if the storage engine does not support the truncate
method. Consequently, the count of affected rows does not, in
any case, reflect the actual number of rows.
- Incompatible change: it is no longer possible to truncate a
table that participates as a parent in a foreign key constraint,
unless it is a self-referencing constraint (both parent and child
are in the same table). To work around this incompatible change
and still be able to truncate such tables, disable foreign checks
with SET foreign_key_checks=0 before truncate. Alternatively, if
foreign key checks are necessary, please use a DELETE statement
without a WHERE condition.
Problem description:
The problem was that for storage engines that do not support
truncate table via a external drop and recreate, such as InnoDB
which implements truncate via a internal drop and recreate, the
delete_all_rows method could be invoked with a shared metadata
lock, causing problems if the engine needed exclusive access
to some internal metadata. This problem originated with the
fact that there is no truncate specific handler method, which
ended up leading to a abuse of the delete_all_rows method that
is primarily used for delete operations without a condition.
Solution:
The solution is to introduce a truncate handler method that is
invoked when the engine does not support truncation via a table
drop and recreate. This method is invoked under a exclusive
metadata lock, so that there is only a single instance of the
table when the method is invoked.
Also, the method is not invoked and a error is thrown if
the table is a parent in a non-self-referencing foreign key
relationship. This was necessary to avoid inconsistency as
some integrity checks are bypassed. This is inline with the
fact that truncate is primarily a DDL operation that was
designed to quickly remove all data from a table.
mysql-test/suite/innodb/t/innodb-truncate.test:
Add test cases for truncate and foreign key checks.
Also test that InnoDB resets auto-increment on truncate.
mysql-test/suite/innodb/t/innodb.test:
FK is not necessary, test is related to auto-increment.
Update error number, truncate is no longer invoked if
table is parent in a FK relationship.
mysql-test/suite/innodb/t/innodb_mysql.test:
Update error number, truncate is no longer invoked if
table is parent in a FK relationship.
Use delete instead of truncate, test is used to check
the interaction of FKs, triggers and delete.
mysql-test/suite/parts/inc/partition_check.inc:
Fix typo.
mysql-test/suite/sys_vars/t/foreign_key_checks_func.test:
Update error number, truncate is no longer invoked if
table is parent in a FK relationship.
mysql-test/t/mdl_sync.test:
Modify test case to reflect and ensure that truncate takes
a exclusive metadata lock.
mysql-test/t/trigger-trans.test:
Update error number, truncate is no longer invoked if
table is parent in a FK relationship.
sql/ha_partition.cc:
Reorganize the various truncate methods. delete_all_rows is now
passed directly to the underlying engines, so as truncate. The
code responsible for truncating individual partitions is moved
to ha_partition::truncate_partition, which is invoked when a
ALTER TABLE t1 TRUNCATE PARTITION p statement is executed.
Since the partition truncate no longer can be invoked via
delete, the bitmap operations are not necessary anymore. The
explicit reset of the auto-increment value is also removed
as the underlying engines are now responsible for reseting
the value.
sql/handler.cc:
Wire up the handler truncate method.
sql/handler.h:
Introduce and document the truncate handler method. It assumes
certain use cases of delete_all_rows.
Add method to retrieve the list of foreign keys referencing a
table. Method is used to avoid truncating tables that are
parent in a foreign key relationship.
sql/share/errmsg-utf8.txt:
Add error message for truncate and FK.
sql/sql_lex.h:
Introduce a flag so that the partition engine can detect when
a partition is being truncated. Used to give a special error.
sql/sql_parse.cc:
Function mysql_truncate_table no longer exists.
sql/sql_partition_admin.cc:
Implement the TRUNCATE PARTITION statement.
sql/sql_truncate.cc:
Change the truncate table implementation to use the new truncate
handler method and to not rely on row-by-row delete anymore.
The truncate handler method is always invoked with a exclusive
metadata lock. Also, it is no longer possible to truncate a
table that is parent in some non-self-referencing foreign key.
storage/archive/ha_archive.cc:
Rename method as the description indicates that in the future
this could be a truncate operation.
storage/blackhole/ha_blackhole.cc:
Implement truncate as no operation for the blackhole engine in
order to remain compatible with older releases.
storage/federated/ha_federated.cc:
Introduce truncate method that invokes delete_all_rows.
This is required to support partition truncate as this
form of truncate does not implement the drop and recreate
protocol.
storage/heap/ha_heap.cc:
Introduce truncate method that invokes delete_all_rows.
This is required to support partition truncate as this
form of truncate does not implement the drop and recreate
protocol.
storage/ibmdb2i/ha_ibmdb2i.cc:
Introduce truncate method that invokes delete_all_rows.
This is required to support partition truncate as this
form of truncate does not implement the drop and recreate
protocol.
storage/innobase/handler/ha_innodb.cc:
Rename delete_all_rows to truncate. InnoDB now does truncate
under a exclusive metadata lock.
Introduce and reorganize methods used to retrieve the list
of foreign keys referenced by a or referencing a table.
storage/myisammrg/ha_myisammrg.cc:
Introduce truncate method that invokes delete_all_rows.
This is required in order to remain compatible with earlier
releases where truncate would resort to a row-by-row delete.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
Remove acquisition of LOCK_open around file system operations,
since such operations are now protected by metadata locks.
Rework table discovery algorithm to not require LOCK_open.
No new tests added since all MDL locking operations are covered
in lock.test and mdl_sync.test, and as long as these tests
pass despite the increased concurrency, consistency must be
unaffected.
mysql-test/t/disabled.def:
Disable NDB tests due to Bug#55799.
sql/datadict.cc:
No longer necessary to protect ha_create_table() with
LOCK_open. Serial execution is now ensured by metadata
locks.
sql/ha_ndbcluster.cc:
Do not manipulate with LOCK_open in cluster code.
sql/ha_ndbcluster_binlog.cc:
Do not manipulate with LOCK_open in cluster code.
sql/ha_ndbcluster_binlog.h:
Update function signature.
sql/handler.cc:
Implement ha_check_if_table_exists().
@todo: some engines provide ha_table_exists_in_engine()
handlerton call, for those we perhaps shouldn't
call ha_discover(), to be more efficient.
Since currently it's only NDB, postpone till
integration with NDB.
sql/handler.h:
Declare ha_check_if_table_exists() function.
sql/mdl.cc:
Remove an obsolete comment.
sql/sql_base.cc:
Update to a new signature of close_cached_tables():
from now on we always call it without LOCK_open.
Update comments.
Remove get_table_share_with_create(), we should
not attempt to create a table under LOCK_open.
Introduce get_table_share_with_discover() instead,
which would request a back off action if the table
exists in engine.
Remove acquisition of LOCK_open for
data dictionary operations, such as check_if_table_exists().
Do not use get_table_share_with_create/discover for views,
where it's not needed.
Make tdc_remove_table() optionally acquire LOCK_open
to simplify usage of this function.
Use the right mutex in the partitioning code when
manipulating with thd->open_tables.
sql/sql_base.h:
Update signatures of changes functions.
sql/sql_insert.cc:
Do not wrap quick_rm_table() with LOCK_open acquisition,
this is unnecessary.
sql/sql_parse.cc:
Update to the new calling convention of tdc_remove_table().
Update to the new signature of close_cached_tables().
Update comments.
sql/sql_rename.cc:
Update to the new calling convention of tdc_remove_table().
Remove acquisition of LOCK_open around filesystem
operations.
sql/sql_show.cc:
Remove get_trigger_table_impl().
Do not acquire LOCK_open for a dirty read of the trigger
file.
sql/sql_table.cc:
Do not acquire LOCK_open for filesystem operations.
sql/sql_trigger.cc:
Do not require LOCK_open for trigger file I/O.
sql/sql_truncate.cc:
Update to the new signature of tdc_remove_table().
sql/sql_view.cc:
Do not require LOCK_open for view I/O.
Use tdc_remove_table() to expel view share.
Update comments.
sql/sys_vars.cc:
Update to the new signature of close_cached_tables().
This patch also fixes Bug#55452 "SET PASSWORD is
replicated twice in RBR mode".
The goal of this patch is to remove the release of
metadata locks from close_thread_tables().
This is necessary to not mistakenly release
the locks in the course of a multi-step
operation that involves multiple close_thread_tables()
or close_tables_for_reopen().
On the same token, move statement commit outside
close_thread_tables().
Other cleanups:
Cleanup COM_FIELD_LIST.
Don't call close_thread_tables() in COM_SHUTDOWN -- there
are no open tables there that can be closed (we leave
the locked tables mode in THD destructor, and this
close_thread_tables() won't leave it anyway).
Make open_and_lock_tables() and open_and_lock_tables_derived()
call close_thread_tables() upon failure.
Remove the calls to close_thread_tables() that are now
unnecessary.
Simplify the back off condition in Open_table_context.
Streamline metadata lock handling in LOCK TABLES
implementation.
Add asserts to ensure correct life cycle of
statement transaction in a session.
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
mysql-test/r/variables.result:
Update results: set @@autocommit and statement transaction/
prelocked mode.
mysql-test/r/view.result:
A harmless change in CHECK TABLE <view> status for a broken view.
If previously a failure to prelock all functions used in a view
would leave the connection in LTM_PRELOCKED mode, now we call
close_thread_tables() from open_and_lock_tables()
and leave prelocked mode, thus some check in mysql_admin_table() that
works only in prelocked/locked tables mode is no longer activated.
mysql-test/suite/rpl/r/rpl_row_implicit_commit_binlog.result:
Fixed Bug#55452 "SET PASSWORD is replicated twice in
RBR mode": extra binlog events are gone from the
binary log.
mysql-test/t/variables.test:
Add a test case: set autocommit and statement transaction/prelocked
mode.
sql/event_data_objects.cc:
Simplify code in Event_job_data::execute().
Move sp_head memory management to lex_end().
sql/event_db_repository.cc:
Move the release of metadata locks outside
close_thread_tables().
Make sure we call close_thread_tables() when
open_and_lock_tables() fails and remove extra
code from the events data dictionary.
Use close_mysql_tables(), a new internal
function to properly close mysql.* tables
in the data dictionary.
Contract Event_db_repository::drop_events_by_field,
drop_schema_events into one function.
When dropping all events in a schema,
make sure we don't mistakenly release all
locks acquired by DROP DATABASE. These
include locks on the database name
and the global intention exclusive
metadata lock.
sql/event_db_repository.h:
Function open_event_table() does not require an instance
of Event_db_repository.
sql/events.cc:
Use close_mysql_tables() instead of close_thread_tables()
to bootstrap events, since the latter no longer
releases metadata locks.
sql/ha_ndbcluster.cc:
- mysql_rm_table_part2 no longer releases
acquired metadata locks. Do it in the caller.
sql/ha_ndbcluster_binlog.cc:
Deploy the new protocol for closing thread
tables in run_query() and ndb_binlog_index
code.
sql/handler.cc:
Assert that we never call ha_commit_trans/
ha_rollback_trans in sub-statement, which
is now the case.
sql/handler.h:
Add an accessor to check whether THD_TRANS object
is empty (has no transaction started).
sql/log.cc:
Update a comment.
sql/log_event.cc:
Since now we commit/rollback statement transaction in
mysql_execute_command(), we need a mechanism to communicate
from Query_log_event::do_apply_event() to mysql_execute_command()
that the statement transaction should be rolled back, not committed.
Ideally it would be a virtual method of THD. I hesitate
to make THD a virtual base class in this already large patch.
Use a thd->variables.option_bits for now.
Remove a call to close_thread_tables() from the slave IO
thread. It doesn't open any tables, and the protocol
for closing thread tables is more complicated now.
Make sure we properly close thread tables, however,
in Load_data_log_event, which doesn't
follow the standard server execution procedure
with mysql_execute_command().
@todo: this piece should use Server_runnable
framework instead.
Remove an unnecessary call to mysql_unlock_tables().
sql/rpl_rli.cc:
Update Relay_log_info::slave_close_thread_tables()
to follow the new close protocol.
sql/set_var.cc:
Remove an unused header.
sql/slave.cc:
Remove an unnecessary call to
close_thread_tables().
sql/sp.cc:
Remove unnecessary calls to close_thread_tables()
from SP DDL implementation. The tables will
be closed by the caller, in mysql_execute_command().
When dropping all routines in a database, make sure
to not mistakenly drop all metadata locks acquired
so far, they include the scoped lock on the schema.
sql/sp_head.cc:
Correct the protocol that closes thread tables
in an SP instruction.
Clear lex->sphead before cleaning up lex
with lex_end to make sure that we don't
delete the sphead twice. It's considered
to be "cleaner" and more in line with
future changes than calling delete lex->sphead
in other places that cleanup the lex.
sql/sp_head.h:
When destroying m_lex_keeper of an instruction,
don't delete the sphead that all lex objects
share.
@todo: don't store a reference to routine's sp_head
instance in instruction's lex.
sql/sql_acl.cc:
Don't call close_thread_tables() where the caller will
do that for us.
Fix Bug#55452 "SET PASSWORD is replicated twice in RBR
mode" by disabling RBR replication in change_password()
function.
Use close_mysql_tables() in bootstrap and ACL reload
code to make sure we release all metadata locks.
sql/sql_base.cc:
This is the main part of the patch:
- remove manipulation with thd->transaction
and thd->mdl_context from close_thread_tables().
Now this function is only responsible for closing
tables, nothing else.
This is necessary to be able to easily use
close_thread_tables() in procedures, that
involve multiple open/close tables, which all
need to be protected continuously by metadata
locks.
Add asserts ensuring that TABLE object
is only used when is protected by a metadata lock.
Simplify the back off condition of Open_table_context,
we no longer need to look at the autocommit mode.
Make open_and_lock_tables() and open_normal_and_derived_tables()
close thread tables and release metadata locks acquired so-far
upon failure. This simplifies their usage.
Implement close_mysql_tables().
sql/sql_base.h:
Add declaration for close_mysql_tables().
sql/sql_class.cc:
Remove a piece of dead code that has also become redundant
after the fix for Bug 37521.
The code became dead when my_eof() was made a non-protocol method,
but a method that merely modifies the diagnostics area.
The code became redundant with the fix for Bug#37521, when
we started to cal close_thread_tables() before
Protocol::end_statement().
sql/sql_do.cc:
Do nothing in DO if inside a substatement
(the assert moved out of trans_rollback_stmt).
sql/sql_handler.cc:
Add comments.
sql/sql_insert.cc:
Remove dead code.
Release metadata locks explicitly at the
end of the delayed insert thread.
sql/sql_lex.cc:
Add destruction of lex->sphead to lex_end(),
lex "reset" method called at the end of each statement.
sql/sql_parse.cc:
Move close_thread_tables() and other related
cleanups to mysql_execute_command()
from dispatch_command(). This has become
possible after the fix for Bug#37521.
Mark federated SERVER statements as DDL.
Next step: make sure that we don't store
eof packet in the query cache, and move
the query cache code outside mysql_parse.
Brush up the code of COM_FIELD_LIST.
Remove unnecessary calls to close_thread_tables().
When killing a query, don't report "OK"
if it was a suicide.
sql/sql_parse.h:
Remove declaration of a function that is now static.
sql/sql_partition.cc:
Remove an unnecessary call to close_thread_tables().
sql/sql_plugin.cc:
open_and_lock_tables() will clean up
after itself after a failure.
Move close_thread_tables() above
end: label, and replace with close_mysql_tables(),
which will also release the metadata lock
on mysql.plugin.
sql/sql_prepare.cc:
Now that we no longer release locks in close_thread_tables()
statement prepare code has become more straightforward.
Remove the now redundant check for thd->killed() (used
only by the backup project) from Execute_server_runnable.
Reorder code to take into account that now mysql_execute_command()
performs lex->unit.cleanup() and close_thread_tables().
sql/sql_priv.h:
Add a new option to server options to interact
between the slave SQL thread and execution
framework (hack). @todo: use a virtual
method of class THD instead.
sql/sql_servers.cc:
Due to Bug 25705 replication of
DROP/CREATE/ALTER SERVER is broken.
Make sure at least we do not attempt to
replicate these statements using RBR,
as this violates the assert in close_mysql_tables().
sql/sql_table.cc:
Do not release metadata locks in mysql_rm_table_part2,
this is done by the caller.
Do not call close_thread_tables() in mysql_create_table(),
this is done by the caller.
Fix a bug in DROP TABLE under LOCK TABLES when,
upon error in wait_while_table_is_used() we would mistakenly
release the metadata lock on a non-dropped table.
Explicitly release metadata locks when doing an implicit
commit.
sql/sql_trigger.cc:
Now that we delete lex->sphead in lex_end(),
zero the trigger's sphead in lex after loading
the trigger, to avoid double deletion.
sql/sql_udf.cc:
Use close_mysql_tables() instead of close_thread_tables().
sql/sys_vars.cc:
Remove code added in scope of WL#4284 which would
break when we perform set @@session.autocommit along
with setting other variables and using tables or functions.
A test case added to variables.test.
sql/transaction.cc:
Add asserts.
sql/tztime.cc:
Use close_mysql_tables() rather than close_thread_tables().
In bug-28430 HA_PRIMARY_KEY_REQUIRED_FOR_POSITION
was disabled in the partitioning engine in the first patch,
That bug was later fixed a second time, but that flag
was not removed.
No need to disable this flag, as it leads to bad
choise in row replication.
sql/ha_partition.h:
Not disabling HA_PRIMARY_KEY_REQUIRED_FOR_POSITION flag.
Updated comment (has nothing to do with hidden key.
sql/handler.h:
Updated comments to about HA_PRIMARY_KEY_REQUIRED_FOR_POSITION.
Essentially, the problem is that safemalloc is excruciatingly
slow as it checks all allocated blocks for overrun at each
memory management primitive, yielding a almost exponential
slowdown for the memory management functions (malloc, realloc,
free). The overrun check basically consists of verifying some
bytes of a block for certain magic keys, which catches some
simple forms of overrun. Another minor problem is violation
of aliasing rules and that its own internal list of blocks
is prone to corruption.
Another issue with safemalloc is rather the maintenance cost
as the tool has a significant impact on the server code.
Given the magnitude of memory debuggers available nowadays,
especially those that are provided with the platform malloc
implementation, maintenance of a in-house and largely obsolete
memory debugger becomes a burden that is not worth the effort
due to its slowness and lack of support for detecting more
common forms of heap corruption.
Since there are third-party tools that can provide the same
functionality at a lower or comparable performance cost, the
solution is to simply remove safemalloc. Third-party tools
can provide the same functionality at a lower or comparable
performance cost.
The removal of safemalloc also allows a simplification of the
malloc wrappers, removing quite a bit of kludge: redefinition
of my_malloc, my_free and the removal of the unused second
argument of my_free. Since free() always check whether the
supplied pointer is null, redudant checks are also removed.
Also, this patch adds unit testing for my_malloc and moves
my_realloc implementation into the same file as the other
memory allocation primitives.
client/mysqldump.c:
Pass my_free directly as its signature is compatible with the
callback type -- which wasn't the case for free_table_ent.
strict aliasing violations.
One somewhat major source of strict-aliasing violations and
related warnings is the SQL_LIST structure. For example,
consider its member function `link_in_list` which takes
a pointer to pointer of type T (any type) as a pointer to
pointer to unsigned char. Dereferencing this pointer, which
is done to reset the next field, violates strict-aliasing
rules and might cause problems for surrounding code that
uses the next field of the object being added to the list.
The solution is to use templates to parametrize the SQL_LIST
structure in order to deference the pointers with compatible
types. As a side bonus, it becomes possible to remove quite
a few casts related to acessing data members of SQL_LIST.
sql/handler.h:
Use the appropriate template type argument.
sql/item.cc:
Remove now-unnecessary cast.
sql/item_subselect.cc:
Remove now-unnecessary casts.
sql/item_sum.cc:
Use the appropriate template type argument.
Remove now-unnecessary cast.
sql/mysql_priv.h:
Move SQL_LIST structure to sql_list.h
Use the appropriate template type argument.
sql/sp.cc:
Remove now-unnecessary casts.
sql/sql_delete.cc:
Use the appropriate template type argument.
Remove now-unnecessary casts.
sql/sql_derived.cc:
Remove now-unnecessary casts.
sql/sql_lex.cc:
Remove now-unnecessary casts.
sql/sql_lex.h:
SQL_LIST now takes a template type argument which must
match the type of the elements of the list. Use forward
declaration when the type is not available, it is used
in pointers anyway.
sql/sql_list.h:
Rename SQL_LIST to SQL_I_List. The template parameter is
the type of object that is stored in the list.
sql/sql_olap.cc:
Remove now-unnecessary casts.
sql/sql_parse.cc:
Remove now-unnecessary casts.
sql/sql_prepare.cc:
Remove now-unnecessary casts.
sql/sql_select.cc:
Remove now-unnecessary casts.
sql/sql_show.cc:
Remove now-unnecessary casts.
sql/sql_table.cc:
Remove now-unnecessary casts.
sql/sql_trigger.cc:
Remove now-unnecessary casts.
sql/sql_union.cc:
Remove now-unnecessary casts.
sql/sql_update.cc:
Remove now-unnecessary casts.
sql/sql_view.cc:
Remove now-unnecessary casts.
sql/sql_yacc.yy:
Remove now-unnecessary casts.
storage/myisammrg/ha_myisammrg.cc:
Remove now-unnecessary casts.
Conflicts:
Text conflict in configure.in
Text conflict in dbug/dbug.c
Text conflict in mysql-test/r/ps.result
Text conflict in mysql-test/t/ps.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/ha_ndbcluster.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_table.cc
to cleanup open connections
It was possible to UNINSTALL storage engine plugin when binding
between THD object and storage engine is still active (e.g. in
the middle of transaction).
To avoid unclean deactivation (uninstall) of storage engine plugin
in the middle of transaction, additional storage engine plugin
lock is acquired by thd_set_ha_data().
If ha_data is not null and storage engine plugin was not locked
by thd_set_ha_data() in this connection before, storage engine
plugin gets locked.
If ha_data is null and storage engine plugin was locked by
thd_set_ha_data() in this connection before, storage engine
plugin lock gets released.
If handlerton::close_connection() didn't reset ha_data, server does
it immediately after calling handlerton::close_connection().
Note that this is just a framework fix, storage engines must switch
to thd_set_ha_data() from thd_ha_data() if they want to see fit.
include/mysql/plugin.h:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
include/mysql/plugin.h.pp:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/handler.cc:
Make sure ha_data is reset and ha_data lock is released.
sql/handler.h:
hton is not supposed to be updated by ha_lock_engine(),
make it const.
sql/sql_class.cc:
As thd_{get|set}_ha_data() have some extra logic now, they
must be implemented on server side.
sql/sql_class.h:
Added ha_data lock.
This patch:
- Moves all definitions from the mysql_priv.h file into
header files for the component where the variable is
defined
- Creates header files if the component lacks one
- Eliminates all include directives from mysql_priv.h
- Eliminates all circular include cycles
- Rename time.cc to sql_time.cc
- Rename mysql_priv.h to sql_priv.h
into partitioned MyISAM table
Problem was that the ha_data structure was introduced in 5.1
and only used for partitioning first, but with the intention
of be of use for others engines as well, and when used by other
engines it would clash if it also was partitioned.
Solution is to move the partitioning specific data to a separate
structure, with its own mutex (which is used for auto_increment).
Also did rename PARTITION_INFO to PARTITION_STATS since there
already exist a class named partition_info, also cleaned up
some related variables.
mysql-test/r/partition_binlog_stmt.result:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
New result file
mysql-test/t/partition_binlog_stmt.test:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
New result file
sql/ha_ndbcluster.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
sql/ha_ndbcluster.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
sql/ha_partition.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
Removed some dead code.
sql/ha_partition.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed some dead code.
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
sql/handler.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
sql/handler.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
sql/mysql_priv.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
Added key_PARTITION_LOCK_auto_inc for instrumentation.
sql/mysqld.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
Added key_PARTITION_LOCK_auto_inc for instrumentation.
sql/partition_info.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed part_state* since it was not in use.
sql/sql_partition.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed part_state* since it was not in use.
sql/sql_partition.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Cleaned up old commented out code.
Removed part_state* since it was not in use.
sql/sql_show.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Rename of PARTITION_INFO to PARTITION_STATS to better
match the use (and there is also a class named
partition_info...)
Renamed partition_info to partition_info_str, since
partition_info is a name of a class.
sql/sql_table.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Renamed partition_info to partition_info_str, since
partition_info is a name of a class.
sql/table.cc:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
Renamed partition_info to partition_info_str, since
partition_info is a name of a class.
removed part_state* since it was not in use.
sql/table.h:
Bug#51851: Server with SBR locks mutex twice on LOAD DATA
into partitioned MyISAM table
Removed the partitioning engines use of ha_data in
TABLE_SHARE and added ha_part_data instead, since
they collide if used in the same time.
Renamed partition_info to partition_info_str, since
partition_info is a name of a class.
removed part_state* since it was not in use.
The task is to
(a) add a comment on indexes and
(b) increase the maximum length of column, table and the new index comments.
The patch committed on behalf of Yoshinori Matsunobu (Yoshinori.Matsunobu@Sun.COM).
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
Implemented a new INFORMATION_SCHEMA table, which is intended to
provide information about tablespaces.
mysql-test/r/information_schema.result:
Updated test result according to WL#2511. With this WL
I_S has new TABLESPACES schema.
mysql-test/r/information_schema_db.result:
Updated test result according to WL#2511. With this WL
I_S has new TABLESPACES schema.
mysql-test/r/mysqlshow.result:
Updated test result according to WL#2511. With this WL
I_S has new TABLESPACES schema.
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated test result according to WL#2511. With this WL
I_S has new TABLESPACES schema.
mysql-test/suite/funcs_1/r/is_tables_is.result:
Updated test result according to WL#2511. With this WL
I_S has new TABLESPACES schema.
sql/handler.h:
Added SCH_TABLESPACES to enum_schema_tables.
sql/mysql_priv.h:
Added human readable definitions for I_S.TABLESPACES field
identifiers.
sql/sql_show.cc:
Added I_S.TABLESPACES schema. The code which handles I_S.FILES
is capable to handle I_S.TABLESPACES as well. Thus we reuse
this code and let functions/variables have more generic names.
------------------------------------------------------------
revno: 2630.22.3
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Thu 2008-08-07 22:33:43 -0300
message:
WL#4284: Transactional DDL locking
Make transaction management more modular through a new interface.
The overall objective of this change is to provide groundwork
for the design of transactional DDL locking by cleaning up the
transaction high level API to better distinguish operations implicit
and explicit, and single statement transaction from operations on
the normal transaction.
Having a a high-level interface for transaction management provides
a better base for implementing transactional concepts that are not
always tied to storage engines and also makes it easier to interect
with other higher level modules of the server.
client/Makefile.am:
Add new file to the build.
libmysqld/CMakeLists.txt:
Add new file to the build.
libmysqld/Makefile.am:
Add new file to the build.
sql/CMakeLists.txt:
Add new file to the build.
sql/Makefile.am:
Add new file to the build.
sql/handler.cc:
Remove multiplexer commit or rollback function. Most callers already
have enough information to decided whether to rollback or commit.
Having plain and well named functions makes it easier to read
and understand code.
sql/handler.h:
Remove wrapper function as the low level transaction functions
shouldn't be called directly anymore.
sql/log_event.cc:
Rename transaction management functions to the new names.
sql/log_event_old.cc:
Rename transaction management functions to the new names.
sql/mysql_priv.h:
Remove obsolete functions for implicit and explicit commit.
sql/rpl_injector.cc:
Rename transaction management functions to the new names.
sql/rpl_rli.cc:
Rename transaction management functions to the new names.
sql/set_var.cc:
Rename transaction management functions to the new names.
sql/slave.cc:
Rename transaction management functions to the new names.
sql/sql_base.cc:
Rename transaction management functions to the new names.
sql/sql_class.cc:
Rename transaction management functions to the new names.
sql/sql_delete.cc:
Rename transaction management functions to the new names.
sql/sql_do.cc:
Rename transaction management functions to the new names.
sql/sql_insert.cc:
Rename transaction management functions to the new names.
sql/sql_parse.cc:
Rename transaction management functions to the new names.
sql/sql_partition.cc:
Rename transaction management functions to the new names.
sql/sql_table.cc:
Rename transaction management functions to the new names.
sql/transaction.cc:
Implement wrapper functions to differentiate operations on
the single statement transaction from the ones operating
on the normal transaction.
sql/transaction.h:
Export new functions for dealing with transaction commands.
Introduce a flag that will enable the REPLACE
command to work correctly with an underlying
storage engine that does not report unique key
conflicts in the ascending order.
sql/handler.h:
WL#4454 change sql_insert.cc::last_uniq_key to match keys in any order
Adds the flag that will be set by a
SE that does not report unique key
conflicts in the ascending order.
sql/sql_insert.cc:
WL#4454 change sql_insert.cc::last_uniq_key to match keys in any order
modifies the function used for a last row
replace optimization to check for the
HA_DUPLICATE_KEY_NOT_IN_ORDER flag.
The attached patch adds a method
handlerton::fill_is_table that can be used
instead of having to create specific
handlerton::fill_*_table methods.
sql/ha_ndbcluster.cc:
WL#4448 Generalize the handlerton::fill_files_table call with handlerton::fill_is_table
Implemented the method ndbcluster_fill_is_table
that uses the supplied table id to switch to the
appropriate fill_*_table method.
sql/handler.h:
WL#4448 Generalize the handlerton::fill_files_table call with handlerton::fill_is_table
Moved the enum_schema_table enumeration
from table.h to here.
contains the declaration for the new method
fill_is_tables.
sql/sql_show.cc:
WL#4448 Generalize the handlerton::fill_files_table call with handlerton::fill_is_table
calls the fill_is_table method instead of the
fill_files_table method.
sql/table.h:
WL#4448 Generalize the handlerton::fill_files_table call with handlerton::fill_is_table
removed the earlier definition of enum_schema_tables.
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/r/show_check.result
Text conflict in mysql-test/r/sp-code.result
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/t/disabled.def
Text conflict in mysql-test/t/show_check.test
Text conflict in mysys/my_delete.c
Text conflict in sql/item.h
Text conflict in sql/item_cmpfunc.h
Text conflict in sql/log.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/repl_failsafe.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_parse.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_yacc.yy
Text conflict in storage/myisam/ha_myisam.cc
Corrected results for
stm_auto_increment_bug33029.reject 2009-12-01
20:01:49.000000000 +0300
<andrei> @@ -42,9 +42,6 @@
<andrei> RETURN i;
<andrei> END//
<andrei> CALL p1();
<andrei> -Warnings:
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
<andrei> -Note 1592 Statement may not be safe to log in statement
format.
There should be indeed no Note present because there is in fact autoincrement
top-level query in sp() that triggers inserting in yet another auto-inc table.
(todo: alert DaoGang to improve the test).
