The problem was that the COM_STMT_SEND_LONG_DATA was sending a response
packet if the prepared statement wasn't found in the server (due to
reconnection). The commands COM_STMT_SEND_LONG_DATA and COM_STMT_CLOSE
should not send any packets, even error packets should not be sent since
they are not expected by the client API.
The solution is to clear generated during the execution of the aforementioned
commands and to skip resend of prepared statement commands. Another fix is
that if the connection breaks during the send of prepared statement command,
the command is not sent again since the prepared statement is no longer in the
server.
in some case.
ER_CON_COUNT_ERROR is defined with SQL state 08004. However, this SQL state is not always
returned.
This error can be thrown in two cases:
1. when an ordinary user (a user w/o SUPER privilege) is connecting,
and the number of active user connections is equal or greater than
max_connections.
2. when a user is connecting and the number of active user connections is
already (max_connections + 1) -- that means that no more connections will
be accepted regardless of the user credentials.
In the 1-st case, SQL state is correct.
The bug happens in the 2-nd case -- on UNIX the client gets 00000 SQL state, which is
absolutely wrong (00000 means "not error SQL state); on Windows
the client accidentally gets HY000 (which means "unknown SQL state).
The cause of the problem is that the server rejects extra connection
prior to read a packet with client capabilities. Thus, the server
does not know if the client supports SQL states or not (if the client
supports 4.1 protocol or not). So, the server supposes the worst and
does not send SQL state at all.
The difference in behavior on UNIX and Windows occurs because on Windows
CLI_MYSQL_REAL_CONNECT() invokes create_shared_memory(), which returns
an error (in default configuration, where shared memory is not configured).
Then, the client does not reset this error, so when the connection is
rejected, SQL state is HY000 (from the error from create_shared_memory()).
The bug appeared after test case for Bug#33507 -- before that, this behavior
just had not been tested.
The fix is to 1) reset the error after create_shared_memory();
2) set SQL state to 'unknown error' if it was not received from
the server.
A separate test case is not required, since the behavior is already
tested in connect.test.
Note for doc-team: the manual should be updated to say that under
some circumstances, 'Too many connections' has HY000 SQL state.
Rename client_last_error to last_error and client_last_errno to last_errno
to not break connectors which use the internal net structure for error handling.
There was no way to return an error from the client library
if no MYSQL connections was established.
So here i added variables to store that king of errors and
made functions like mysql_error(NULL) to return these.
--local-infile=0 checks can be bypassed by sending a FETCH LOCAL FILE response
Add a check for CLIENT_LOCAL_FILES before sending a local file.
Beware, that all binary distributions enable sending of local files and it's up
to the programs which use libmysql to disable it, if they don't use this functionality.
Otherwise they are not safe.
cause ROLLBACK of statement", part 1. Review fixes.
Do not send OK/EOF packets to the client until we reached the end of
the current statement.
This is a consolidation, to keep the functionality that is shared by all
SQL statements in one place in the server.
Currently this functionality includes:
- close_thread_tables()
- log_slow_statement().
After this patch and the subsequent patch for Bug#12713, it shall also include:
- ha_autocommit_or_rollback()
- net_end_statement()
- query_cache_end_of_result().
In future it may also include:
- mysql_reset_thd_for_next_command().
No functionality added or changed.
This is a pre-requisite for the fix for Bug#12713 Error in a stored
function called from a SELECT doesn't cause ROLLBACK of statem
Address post-review comments.
Faster thr_alarm()
Added 'Opened_files' status variable to track calls to my_open()
Don't give warnings when running mysql_install_db
Added option --source-install to mysql_install_db
I had to do the following renames() as used polymorphism didn't work with Forte compiler on 64 bit systems
index_read() -> index_read_map()
index_read_idx() -> index_read_idx_map()
index_read_last() -> index_read_last_map()
--long-query-time is now given in seconds with microseconds as decimals
--min_examined_row_limit added for slow query log
long_query_time user variable is now double with 6 decimals
Added functions to get time in microseconds
Added faster time() functions for system that has gethrtime() (Solaris)
We now do less time() calls.
Added field->in_read_set() and field->in_write_set() for easier field manipulation by handlers
set_var.cc and my_getopt() can now handle DOUBLE variables.
All time() calls changed to my_time()
my_time() now does retry's if time() call fails.
Added debug function for stopping in mysql_admin_table() when tables are locked
Some trivial function and struct variable renames to avoid merge errors.
Fixed compiler warnings
Initialization of some time variables on windows moved to my_init()
unpack_fields() didn't expect NULL_LENGHT in the field's descriptions.
In this case we get NULL in the resulting string so cannot use
strdup_root to make a copy of it.
strdup_root changed with strmake_root as it's NULL-safe
If one sets MYSQL_READ_DEFAULTS_FILE and MYSQL_READ_DEFAULT_GROUP options
after mysql_real_connect() called with that MYSQL instance,
these options will affect next mysql_reconnect then.
As we use a copy of the original MYSQL object inside mysql_reconnect,
and mysql_real_connect frees options.my_cnf_file and _group strings,
we will free these twice when we execute mysql_reconnect with the
same MYSQL for the second time.
I don't think we should ever read defaults files handling mysql_reconnect.
So i just set them to 0 for the temporary MYSQL object there/
long shared-memory-base-names could overflow a static internal buffer
and thus crash mysqld and various clients. change both to dynamic
buffers, show everything but overflowing those buffers still works.
The test case for this would pretty much amount to
mysqld --shared-memory-base-name=HeyMrBaseNameXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX --shared-memory=1 &
mysqladmin --no-defaults --shared-memory-base-name=HeyMrBaseNameXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX shutdown
Unfortunately, we can't just use an .opt file for the
server. The .opt file is used at start-up, before any
include in the actual test can tell mysqltest to skip
this one on non-Windows. As a result, such a test would
break on unices.
Fixing mysql-test-run.pl to export full path for master
and slave would enable us to start a server from within
the test which is ugly and, what's more, doesn't work as
the server blocks (mysqltest offers no fire-and-forget
fork-and-exec), and mysqladmin never gets run.
Making the test rpl_windows_shm or some such so we can
is beyond ugly. As is introducing another file-name based
special case (run "win*.test" only when on Windows). As is
(yuck) coding half the test into mtr (as in, having it
hand out a customized environment conductive to the shm-
thing on Win only).
Situation is exacerbated by the fact that .sh is not
necessary run as expected on Win.
In short, it's just not worth it. No test-case until we
have a new-and-improved test framework.
- Add build configuration parameter EMBEDDED_ONLY which will configure
the VS solution to produce only mysql embedded binary.
- Make necessary updates to successfully compile solution.
- The "mysql client in mysqld"(which is used by
replication and federated) should use alarms instead of setting
socket timeout value if the rest of the server uses alarm. By
always calling 'my_net_set_write_timeout'
or 'my_net_set_read_timeout' when changing the timeout value(s), the
selection whether to use alarms or timeouts will be handled by
ifdef's in those two functions.
- Move declaration of 'vio_timeout' into "vio_priv.h"
The following type conversions was done:
- Changed byte to uchar
- Changed gptr to uchar*
- Change my_string to char *
- Change my_size_t to size_t
- Change size_s to size_t
Removed declaration of byte, gptr, my_string, my_size_t and size_s.
Following function parameter changes was done:
- All string functions in mysys/strings was changed to use size_t
instead of uint for string lengths.
- All read()/write() functions changed to use size_t (including vio).
- All protocoll functions changed to use size_t instead of uint
- Functions that used a pointer to a string length was changed to use size_t*
- Changed malloc(), free() and related functions from using gptr to use void *
as this requires fewer casts in the code and is more in line with how the
standard functions work.
- Added extra length argument to dirname_part() to return the length of the
created string.
- Changed (at least) following functions to take uchar* as argument:
- db_dump()
- my_net_write()
- net_write_command()
- net_store_data()
- DBUG_DUMP()
- decimal2bin() & bin2decimal()
- Changed my_compress() and my_uncompress() to use size_t. Changed one
argument to my_uncompress() from a pointer to a value as we only return
one value (makes function easier to use).
- Changed type of 'pack_data' argument to packfrm() to avoid casts.
- Changed in readfrm() and writefrom(), ha_discover and handler::discover()
the type for argument 'frmdata' to uchar** to avoid casts.
- Changed most Field functions to use uchar* instead of char* (reduced a lot of
casts).
- Changed field->val_xxx(xxx, new_ptr) to take const pointers.
Other changes:
- Removed a lot of not needed casts
- Added a few new cast required by other changes
- Added some cast to my_multi_malloc() arguments for safety (as string lengths
needs to be uint, not size_t).
- Fixed all calls to hash-get-key functions to use size_t*. (Needed to be done
explicitely as this conflict was often hided by casting the function to
hash_get_key).
- Changed some buffers to memory regions to uchar* to avoid casts.
- Changed some string lengths from uint to size_t.
- Changed field->ptr to be uchar* instead of char*. This allowed us to
get rid of a lot of casts.
- Some changes from true -> TRUE, false -> FALSE, unsigned char -> uchar
- Include zlib.h in some files as we needed declaration of crc32()
- Changed MY_FILE_ERROR to be (size_t) -1.
- Changed many variables to hold the result of my_read() / my_write() to be
size_t. This was needed to properly detect errors (which are
returned as (size_t) -1).
- Removed some very old VMS code
- Changed packfrm()/unpackfrm() to not be depending on uint size
(portability fix)
- Removed windows specific code to restore cursor position as this
causes slowdown on windows and we should not mix read() and pread()
calls anyway as this is not thread safe. Updated function comment to
reflect this. Changed function that depended on original behavior of
my_pwrite() to itself restore the cursor position (one such case).
- Added some missing checking of return value of malloc().
- Changed definition of MOD_PAD_CHAR_TO_FULL_LENGTH to avoid 'long' overflow.
- Changed type of table_def::m_size from my_size_t to ulong to reflect that
m_size is the number of elements in the array, not a string/memory
length.
- Moved THD::max_row_length() to table.cc (as it's not depending on THD).
Inlined max_row_length_blob() into this function.
- More function comments
- Fixed some compiler warnings when compiled without partitions.
- Removed setting of LEX_STRING() arguments in declaration (portability fix).
- Some trivial indentation/variable name changes.
- Some trivial code simplifications:
- Replaced some calls to alloc_root + memcpy to use
strmake_root()/strdup_root().
- Changed some calls from memdup() to strmake() (Safety fix)
- Simpler loops in client-simple.c
Change to use remove_file instead of 'system rm' in a lot of tests. (Should fix some windows test problems)
Removed memory leak in mysql_test if sync_with_master fails.
Do not terminate ndb_cluster_binary_log before the util thread has finnished. This should fix a shutdown bug where a thread is accessing injector_mutex after it's freed.
Patch may fix Bug#27622 "mysqld shutdown, util thread continues, while binlog thread exits"
Print information if net_clear() skipped bytes (As this otherwise hides critical timeing bugs)
Added DBUG_ASSERT if we get packets out of order
mysql_change_user() could on error send multiple packets, which caused mysql_client_test to randomly fail
- Interpret the pointer passed to 'mysql_options' for
MYSQL_OPT_SSL_VERIFY_SERVER_CERT as a my_bool
- In 5.1 the mysql_options signature will be chanegd to take
a 'void*' in order to further emphasize the need for a pointer
to correct type
