The problem was caused by the following scenario:
Subquery's table has two indexes, KEY a(a), KEY a_b(a,b)
- LATERAL DERIVED optimization decides to use index a.
= The subquery uses ref access over key a.
- test_if_skip_sort_order() sees that KEY a_b satisfies the
subquery's GROUP BY clause, and attempts to switch to it.
= It fails to do so, because KEYUSE objects for index a_b
are switched off.
Fixed by disallowing to change the ref access key if it uses KEYUSE
objects injected by LATERAL DERIVED optimization.
Item_func_history (is_history()) is a bool function that checks if the
row is the history row by checking row_end->is_max(). The argument to
this function must be row_end system field.
Added the above function to conjunction with SYSTEM_TIME_BEFORE
versioning condition.
The optimizer removes redundant GROUP BY operations. If GROUP BY element
is a subselect, it is "eliminated".
However one must not eliminate the item if it is used both in the select
list and in the GROUP BY, like so:
select (select ... ) as SUBQ from ... group by SUBQ
Do not eliminate such items.
The easiest way to compile and test the server with UBSAN is to run:
./BUILD/compile-pentium64-ubsan
and then run mysql-test-run.
After this commit, one should be able to run this without any UBSAN
warnings. There is still a few compiler warnings that should be fixed
at some point, but these do not expose any real bugs.
The 'special' cases where we disable, suppress or circumvent UBSAN are:
- ref10 source (as here we intentionally do some shifts that UBSAN
complains about.
- x86 version of optimized int#korr() methods. UBSAN do not like unaligned
memory access of integers. Fixed by using byte_order_generic.h when
compiling with UBSAN
- We use smaller thread stack with ASAN and UBSAN, which forced me to
disable a few tests that prints the thread stack size.
- Verifying class types does not work for shared libraries. I added
suppression in mysql-test-run.pl for this case.
- Added '#ifdef WITH_UBSAN' when using integer arithmetic where it is
safe to have overflows (two cases, in item_func.cc).
Things fixed:
- Don't left shift signed values
(byte_order_generic.h, mysqltest.c, item_sum.cc and many more)
- Don't assign not non existing values to enum variables.
- Ensure that bool and enum values are properly initialized in
constructors. This was needed as UBSAN checks that these types has
correct values when one copies an object.
(gcalc_tools.h, ha_partition.cc, item_sum.cc, partition_element.h ...)
- Ensure we do not called handler functions on unallocated objects or
deleted objects.
(events.cc, sql_acl.cc).
- Fixed bugs in Item_sp::Item_sp() where we did not call constructor
on Query_arena object.
- Fixed several cast of objects to an incompatible class!
(Item.cc, Item_buff.cc, item_timefunc.cc, opt_subselect.cc, sql_acl.cc,
sql_select.cc ...)
- Ensure we do not do integer arithmetic that causes over or underflows.
This includes also ++ and -- of integers.
(Item_func.cc, Item_strfunc.cc, item_timefunc.cc, sql_base.cc ...)
- Added JSON_VALUE_UNITIALIZED to json_value_types and ensure that
value_type is initialized to this instead of to -1, which is not a valid
enum value for json_value_types.
- Ensure we do not call memcpy() when second argument could be null.
- Fixed that Item_func_str::make_empty_result() creates an empty string
instead of a null string (safer as it ensures we do not do arithmetic
on null strings).
Other things:
- Changed struct st_position to an OBJECT and added an initialization
function to it to ensure that we do not copy or use uninitialized
members. The change to a class was also motived that we used "struct
st_position" and POSITION randomly trough the code which was
confusing.
- Notably big rewrite in sql_acl.cc to avoid using deleted objects.
- Changed in sql_partition to use '^' instead of '-'. This is safe as
the operator is either 0 or 0x8000000000000000ULL.
- Added check for select_nr < INT_MAX in JOIN::build_explain() to
avoid bug when get_select() could return NULL.
- Reordered elements in POSITION for better alignment.
- Changed sql_test.cc::print_plan() to use pointers instead of objects.
- Fixed bug in find_set() where could could execute '1 << -1'.
- Added variable have_sanitizer, used by mtr. (This variable was before
only in 10.5 and up). It can now have one of two values:
ASAN or UBSAN.
- Moved ~Archive_share() from ha_archive.cc to ha_archive.h and marked
it virtual. This was an effort to get UBSAN to work with loaded storage
engines. I kept the change as the new place is better.
- Added in CONNECT engine COLBLK::SetName(), to get around a wrong cast
in tabutil.cpp.
- Added HAVE_REPLICATION around usage of rgi_slave, to get embedded
server to compile with UBSAN. (Patch from Marko).
- Added #ifdef for powerpc64 to avoid a bug in old gcc versions related
to integer arithmetic.
Changes that should not be needed but had to be done to suppress warnings
from UBSAN:
- Added static_cast<<uint16_t>> around shift to get rid of a LOT of
compiler warnings when using UBSAN.
- Had to change some '/' of 2 base integers to shift to get rid of
some compile time warnings.
Reviewed by:
- Json changes: Alexey Botchkov
- Charset changes in ctype-uca.c: Alexander Barkov
- InnoDB changes & Embedded server: Marko Mäkelä
- sql_acl.cc changes: Vicențiu Ciorbaru
- build_explain() changes: Sergey Petrunia
At the second execution of the PS
1. mark_as_dependent() is called with the same parameters as at the first
execution (select#4 and select#3)
2. as outer_select (select#3) has been already merged at the first
execution of PS it cannot be reached using the outer_select() function
anymore (and so can not stop iteration).
3. as a result all selects towards the top level select including the
select for 'ca' are marked as uncacheable.
4. Marked uncacheable it executed incorrectly triggering filling its
temporary table several times and using freed memory at the end.
To avoid the problem we use name resolution context to go "up".
NOTE: problem also exists in 10.2 but has no visible effect on execution.
That is why the problem is fixed in 10.2.
The patch also add debug logging of important procedures and
better specify parameters types of st_select_lex::mark_as_dependent.
splittable derived
If one of joined tables of the processed query is a materialized derived
table (or view or CTE) with GROUP BY clause then under some conditions it
can be subject to split optimization. With this optimization new equalities
are injected into the WHERE condition of the SELECT that specifies this
derived table. The injected equalities are generated for all join orders
with which the split optimization can employed. After the best join order
has been chosen only certain of this equalities are really needed. The
others can be safely removed. If it's not done and some of injected
equalities involve expressions over semi-joins with look-up access then
the query may return a wrong result set.
This patch effectively removes equalities injected for split optimization
that are needed only at the optimization stage and not needed for execution.
Approved by serg@mariadb.com
row_number() over () window function can be used without any column in the OVER
clause. Additionally, the item doesn't reference any tables, as it's not
effectively referencing any table. Rather it is specifically built based
on the end temporary table used for window function computation.
This caused remove_const function to wrongly drop it from the ORDER
list. Effectively, we shouldn't be dropping any window function from the
ORDER clause, so adjust remove_const to account for that.
Reviewed by: Sergei Petrunia sergey@mariadb.com
Attempt to execute EXPLAIN statement on multi-table DELETE statement
leads to firing firing of the assertion
DBUG_ASSERT(! is_set());
in the method Diagnostics_area::set_eof_status.
For example, above mentioned assertion failure happens
in case any of the following statements
EXPLAIN DELETE FROM t1.* USING t1
EXPLAIN DELETE b FROM t1 AS a JOIN t1 AS b
are executed in prepared statement mode provided the table t1
does exist.
This assertion is hit by the reason that a status of
Diagnostics_area is set twice. The first time it is set from
the function do_select() when the method multi_delete::send_eof()
called. The second time it is set when the method
Explain_query::send_explain() calls the method select_send::send_eof
(this method invokes the method Diagnostics_area::set_eof_status that
finally hits assertion)
The second invocation for a setter method of the class Diagnostics_area
is correct and run to send a response containing explain data.
But first invocation of a setter method of the class Diagnostics_area
is wrong since the function do_select() shouldn't be called at all
for handling of the EXPLAIN statement.
The reason by that the function do_select() is called during handling of
the EXPLAIN statement is that the flag SELECT_DESCRIBE not set in the
data member JOIN::select_options. The flag SELECT_DESCRIBE
if is copied from values select_lex->options.
During parsing of EXPLAIN statement this flag is set but latter reset
from the function reinit_stmt_before_use() that is called on
execution of prepared statement.
void reinit_stmt_before_use(THD *thd, LEX *lex)
{
...
for (; sl; sl= sl->next_select_in_list())
{
if (sl->changed_elements & TOUCHED_SEL_COND)
{
/* remove option which was put by mysql_explain_union() */
sl->options&= ~SELECT_DESCRIBE;
...
}
...
}
So, to fix the issue the flag SELECT_DESCRIBE is set forcibly at the
mysql_select() function in case thd->lex->describe set,
that is in case EXPLAIN being executed.
Fixes also:
MDEV-24942 Server crashes in _ma_rec_pack... with DEFAULT() on BLOB
This was caused by two different bugs, both related to that the default
value for the blob was not calculated before it was used:
- There where now Item_default_value::..result() wrappers, which is
needed as item in HAVING uses these. This causes crashes when
using a reference to a DEFAULT(blob_field) in HAVING. It also
caused wrong results when used with other fields with default value
expressions that are not constants.
- create_tmp_field() did not take into account that blob fields with
default expressions are not yet initialized. Fixed by treating
Item_default_value(blob) like a normal item expression.
The failure happened for group by queries when all tables where marked as
'const tables' (tables with 0-1 matching rows) and no row matched the
where clause and there was in addition a direct reference to a field.
In this case the field would not be properly reset and the query would
return 'random data' that happended to be in table->record[0].
Fixed by marking all const tables as null tables in this particular case.
Sergei also provided an extra test case for the code.
@reviewer Sergei Petrunia <psergey@askmonty.org>
For an IN/ANY/ALL subquery without an aggregate function and HAVING clause,
the GROUP BY clause is removed.
Due to the GROUP BY list being removed, the invalid reference in the GROUP BY
clause was never resolved.
Remove the GROUP BY list only when the all the items in the GROUP BY list
are resolved.
Also removing the GROUP BY list later would not affect the extension that allows
using non-aggregated field in an aggregate function (when ONLY_FULL_GROUP_BY
is not set) because the GROUP BY list is removed only when their is
NO aggregate function in IN/ALL/ANY subquery.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
I_S tables were materialized too late, an attempt to use table
statistics before the table was created caused a crash.
Let's move table creation up. it only needs read_set to
be calculated properly, this happens in JOIN::optimize_inner(),
after semijoin transformation.
Note that tables are not populated at that point, so most of the
statistics would make no sense anyway. But at least field sizes
will be correct. And it won't crash.
The assertion failed in handler::ha_reset upon SELECT under
READ UNCOMMITTED from table with index on virtual column.
This was the debug-only failure, though the problem is mush wider:
* MY_BITMAP is a structure containing my_bitmap_map, the latter is a raw
bitmap.
* read_set, write_set and vcol_set of TABLE are the pointers to MY_BITMAP
* The rest of MY_BITMAPs are stored in TABLE and TABLE_SHARE
* The pointers to the stored MY_BITMAPs, like orig_read_set etc, and
sometimes all_set and tmp_set, are assigned to the pointers.
* Sometimes tmp_use_all_columns is used to substitute the raw bitmap
directly with all_set.bitmap
* Sometimes even bitmaps are directly modified, like in
TABLE::update_virtual_field(): bitmap_clear_all(&tmp_set) is called.
The last three bullets in the list, when used together (which is mostly
always) make the program flow cumbersome and impossible to follow,
notwithstanding the errors they cause, like this MDEV-17556, where tmp_set
pointer was assigned to read_set, write_set and vcol_set, then its bitmap
was substituted with all_set.bitmap by dbug_tmp_use_all_columns() call,
and then bitmap_clear_all(&tmp_set) was applied to all this.
To untangle this knot, the rule should be applied:
* Never substitute bitmaps! This patch is about this.
orig_*, all_set bitmaps are never substituted already.
This patch changes the following function prototypes:
* tmp_use_all_columns, dbug_tmp_use_all_columns
to accept MY_BITMAP** and to return MY_BITMAP * instead of my_bitmap_map*
* tmp_restore_column_map, dbug_tmp_restore_column_maps to accept
MY_BITMAP* instead of my_bitmap_map*
These functions now will substitute read_set/write_set/vcol_set directly,
and won't touch underlying bitmaps.
This bug could cause a crash when executing queries that used mutually
recursive CTEs with system variable big_tables set to 1. It happened due
to several bugs in the code that handled recursive table references
referred mutually recursive CTEs. For each recursive table reference a
temporary table is created that contains all rows generated for the
corresponding recursive CTE table on the previous step of recursion.
This temporary table should be created in the same way as the temporary
table created for a regular materialized derived table using the
method select_union::create_result_table(). In this case when the
temporary table is created it uses the select_union::TMP_TABLE_PARAM
structure as the parameter for the table construction. However the
code created the temporary table using just the function create_tmp_table()
and passed pointers to certain fields of the TMP_TABLE_PARAM structure
used for accumulation of rows of the recursive CTE table as parameters
for update. This was a mistake because now different temporary tables
cannot share some TMP_TABLE_PARAM fields in a general case. Besides,
depending on how mutually recursive CTE tables were defined and which
of them were referred in the executed query the select_union object
allocated for a recursive table reference could be allocated again after
the the temporary table had been created. In this case the TMP_TABLE_PARAM
object associated with the temporary table created for the recursive
table reference contained unassigned fields needed for execution when
Aria engine is employed as the engine for temporary tables.
This patch ensures that
- select_union object is created only once for any recursive table
reference
- any temporary table created for recursive CTEs uses its own
TMP_TABLE_PARAM structure
The patch also fixes a problem caused by incomplete cleanup of join tables
associated with recursive table references.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Due to a premature cleanup of the unit that specified a recursive CTE
used in the second operand of union the server fell into an infinite
loop in the reported test case. In other cases this premature cleanup
could cause other problems.
The bug is the result of a not quite correct fix for MDEV-17024. The
unit that specifies a recursive CTE has to be cleaned only after the
cleanup of the last external reference to this CTE. It means that
cleanups of the unit triggered not by the cleanup of a external
reference to the CTE must be blocked.
Usage of local table chains in selects to get external references to
recursive CTEs was not correct either because of possible merges of
some selects.
Also fixed a minor bug in st_select_lex::set_explain_type() that caused
typing 'RECURSIVE UNION' instead of 'UNION' in EXPLAIN output for external
references to a recursive CTE.
This follows up commit
commit 94a520ddbe and
commit 7c5519c12d.
After these changes, the default test suites on a
cmake -DWITH_UBSAN=ON build no longer fail due to passing
null pointers as parameters that are declared to never be null,
but plenty of other runtime errors remain.
Reimplement MDEV-14275 Improving memory utilization for information schema
Postpone temp table instantiation until after setup_fields().
Replace all unused (not marked in read_set) columns in an I_S table
with CHAR(0). This can drastically reduce the footprint of a MEMORY
table (a TABLE_CATALOG alone is 1538 bytes per row).
This does not change the engine. If the table was decided to be Aria
(because of, say, blobs) then after optimization it'll stay Aria
even if all blobs were removed.
Note 1: when transforming table structure, share->blob_fields is
preserved, otherwise Aria might switch from DYNAMIC to STATIC row format
and expect a special field for a deleted mark, which create_tmp_tabe
didn't provide.
Note 2: optimizer was doing handler::info() (to know the number of rows)
before the temp table is populated. That didn't make much sense. Now
it's done before the table is even instantiated. Preserve the old
behavior and report 0 rows.
This reverts e2664ee836 and a8458a2345
PARTITION clause in SELECT means query is non-versioned (see
WITH_PARTITION_STORAGE_ENGINE in vers_setup_conds()).
vers_setup_conds() expands such query to SYSTEM_TIME_ALL which is then
added to VIEW specification. When VIEW is queried both clauses
PARTITION and FOR SYSTEM_TIME ALL lead to ER_VERS_QUERY_IN_PARTITION
(same place WITH_PARTITION_STORAGE_ENGINE).
Fix removes FOR SYSTEM_TIME ALL from VIEW by accessing original
SYSTEM_TIME clause: the one specified in parser. As a side-effect
EXPLAIN SELECT displays SYSTEM_TIME specified in SELECT which is
user-friendly.
For join to work correctly versioning condition must be added to table
on_expr. Without that JOIN_CACHE gets expression (1)
trigcond(xtitle.row_end = TIMESTAMP'2038-01-19 06:14:07.999999') and
trigcond(xtitle.elementId = x.`id` and xtitle.pkey = 'title')
instead of (2)
trigcond(xtitle.elementId = x.`id` and xtitle.pkey = 'title')
for join_null_complements(). It is NULL-row of xtitle for
complementing the join and the above comparisons of course FALSE, but
trigcond (Item_func_trig_cond) makes them TRUE via its trig_var
property which is bound to some boolean properties of JOIN_TAB.
Expression (2) evaluated to TRUE because its trig_var is bound to
first_inner_tab->not_null_compl. The expression (1) does not evaluate
correctly because row_end comparison's trig_var is bound to
first_inner->found earlier. As a result JOIN_CACHE::check_match()
skipped the row for join_null_complements().
When we add versioning condition to table's on_expr the optimizer in
make_join_select() distributes conditions differently. tmp_cond
inherits on_expr value and in Good case it is full expression
xgender.elementId = x.`id` and xgender.pkey = 'gender' and
xgender.row_end = TIMESTAMP'2038-01-19 06:14:07.999999'
while in Bad case it is only
xgender.elementId = x.`id` and xgender.pkey = 'gender'.
Later in Good row_end condition is optimized out and we get one
trigcond in form of (2).
Diagnostics_area::set_error_status
Analysis: When strict mode is enabled, all warnings are converted to errors
including those which do not occur because of bad data.
Fix: Query should not be aborted when we have warning because limit to
examine rows was reached because it doesn't happen due to bad data.
So thd->abort_on_warning should be false.
