- Changed storage to be 2 bytes instead of sizeof(size_t) (simple optimization)
- Fixed bug when using query_cache_strip_comments and query that started with '('
- Fixed DBUG_PRINT() that used wrong (not initialized) variables.
mysql-test/mysql-test-run.pl:
Added some space to make output more readable.
mysql-test/r/query_cache.result:
Updated test results
mysql-test/t/query_cache.test:
Added test with query_cache_strip_comments
sql/mysql_priv.h:
Added QUERY_CACHE_DB_LENGTH_SIZE
sql/sql_cache.cc:
Fixed bug when using query_cache_strip_comments and query that started with '('
Store db length in 2 characters instead of size_t.
Get db length from correct position (earlier we had an error when query started with ' ')
Fixed DBUG_PRINT() that used wrong (not initialized) variables.
The problem was that merged views has its own nest_level numbering =>
when we compare nest levels we should take into considiration basis (i.e. 0 level),
if it is different then nest levels are not comparable.
The bug case is similar to one fixed earlier bug_49536.
Deadlock involving LOCK_log appears to be possible because the purge running thread
is holding LOCK_log whereas there is no sense of doing that and which fact was
exploited by the earlier bug fixes.
Fixed with small reengineering of rotate_and_purge(), adding two new methods and
setting up a policy to execute those instead of the former
rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
The policy for using rotate(), purge() is that if the caller acquires LOCK_log itself,
it should call rotate(), release the mutex and run purge().
Side effect of this patch is refining error message of bug@11747416 to print
the whole path.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_log_pos.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_packet.result:
the file name printing is changed to a relative path instead of just the file name.
mysql-test/suite/rpl/r/rpl_rotate_purge_deadlock.result:
new result file is added.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
The test of that bug can't satisfy windows and unix backslash interpretation so windows
execution is chosen to bypass.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock-master.opt:
new opt file is added.
mysql-test/suite/rpl/t/rpl_rotate_purge_deadlock.test:
regression test is added as well as verification of a
possible side effect of the fixes is tried.
sql/log.cc:
LOCK_log is never taken during execution of log purging routine.
The former MYSQL_BIN_LOG::rotate_and_purge is made to necessarily
acquiring and releasing LOCK_log.
If caller takes the mutex itself it has to use a new rotate(), purge()
methods combination and to never let purge() be run with LOCK_log grabbed.
split apart to allow
the caller to chose either it
Simulation of concurrently rotating/purging threads is added.
sql/log.h:
new rotate(), purge() methods are added to be used instead of
the former rotate_and_purge(RP_LOCK_LOG_IS_ALREADY_LOCKED).
rotate_and_purge() signature is changed. Caller should not call rotate_and_purge()
but rather {rotate(), purge()} if LOCK_log is acquired by it.
sql/rpl_injector.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_class.h:
unnecessary constants are removed.
sql/sql_parse.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_reload.cc:
changes to reflect the new rotate_and_purge() signature.
sql/sql_repl.cc:
followup for bug@11747416: the file name printing is changed to a relative
path instead of just the file name.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
A buffer large enough to hold the query _plus_ some additional
data is allocated before parsing is started. The additional data
is used by the query cache, and consists of the name of the current
database and a set of flags.
When a packet containing multiple SQL statements is sent to the
server and one of the statements changes the current database
(a "USE <db>" statement), and the name of the new current database
is longer than of the previous, there is not enough space in the
buffer for the new name, and we write out over the buffer boundary.
The fix adds an extra field to store the number of bytes
allocated to the database name in the buffer. If the current
database name changes, and the new name is longer than the
previous one, we refuse to cache the query.
Cleanup: Changed procedure type from a int/char to an enum for easier to manage and debug code.
mysql-test/r/trigger.result:
Test that mysql.proc is not used as part of creating or using a trigger.
mysql-test/t/trigger.test:
Test that mysql.proc is not used as part of creating or using a trigger.
sql/sp.cc:
The main bug fix is to not look up triggers in mysql.proc; This is done by ignoreing type == TYPE_ENUM_TRIGGER in sp_add_used_routine()
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sp_head.h:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_db.cc:
Fix include order
sql/sql_lex.cc:
Fix include order
sql/sql_parse.cc:
Cleanup: Changed procedure type from a int/char to an enum.
sql/sql_show.cc:
Fix include order
sql/sql_view.cc:
Fix include order
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL
Problem: The following statements can cause the slave to go out of sync
if logged in statement format:
INSERT IGNORE...SELECT
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE
REPLACE ... SELECT
UPDATE IGNORE :
CREATE ... IGNORE SELECT
CREATE ... REPLACE SELECT
Background: Since the order of the rows returned by the SELECT
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master.
Fix:
Issue a warning when statements like the above are exectued and
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
Six new warning messages has been added for each unsafe statement.
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.
mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
Test removed: Added the test to rpl.rpl_insert_ignore.test
******
Test removed: the test is redundant as the same is being tested in rpl.rpl_insert_ignore.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
Warnings disabled for the unsafe statements.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
1. Disabled warnings while for unsafe statements
2. As INSERT...IGNORE is an unsafe statement, an insert ignore not changing any rows,
will not be logged in the binary log, in the ROW and MIXED modes. It will however be logged
in STATEMENT mode.
mysql-test/r/commit_1innodb.result:
updated result file
******
updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
added tests for the statements marked as unsafe.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
File Removed :Result file of rpl_insert_duplicate, which has been removed.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
Added the content of rpl.rpl_insert_duplicate here.
mysql-test/suite/rpl/r/rpl_insert_select.result:
Result file removed as the corresponding test has beenn removed.
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
File Removed: this was a wrapper for rpl.rpl_insert_duplicate.test, which has been removed.
mysql-test/suite/rpl/t/rpl_insert_select.test:
File Removed: This test became redundant after this fix, This test showed how INSERT IGNORE...SELECT break replication, which has been handled in this fix.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
Since all the tests are statement based bugs are being tested, having mixed format
forces the event to be written in row format. When the statement and causes the
test to fail as certain known bugs do not occur when the even is logged in row format.
sql/share/errmsg-utf8.txt:
added 6 new Warning messages.
******
added 6 new Warning messages.
sql/sql_lex.cc:
Added 6 new error Identifier [ER_BINLOG_STMT_UNSAFEE_*]
sql/sql_lex.h:
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
******
Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
sql/sql_parse.cc:
added check for specific queries and marked them as unsafe.
******
added check for specific queries and marked them as unsafe.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
The main problem was that lex_start() was forgotten to be called before processing
COM_REFRESH.
Another problem discovered was that if failures to flush the error log were not properly
handled, which resulted in the server crash.
The user-visible effect of these problems were:
- if COM_REFRESH command was sent after SQL-queries of some sort,
the server would crash.
- if COM_REFRESH was requested with REFRESH_LOG only, and the error log
failed to flush, the server would crash. The error log fails to flush
when it points to unavailable file (for example, due to restricted
permissions).
The fixes are:
- call lex_start() in the beginning of COM_REFRESH;
- handle failures to flush the error log properly, i.e. raise ER_UNKNOWN_ERROR.
sql/sql_parse.cc:
Fix for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES ARE RUN CONCURRENTLY.
tests/mysql_client_test.c:
A test case for Bug#13001491: MYSQL_REFRESH CRASHES WHEN STORED ROUTINES
ARE RUN CONCURRENTLY.
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
- The problem was that the code that made the check whether the subquery is an AND-part of the WHERE
clause didn't work correctly for nested subqueries. In particular, grand-child subquery in HAVING was
treated as if it was in the WHERE, which eventually caused an assert when replace_where_subcondition
looked for the subquery predicate in the WHERE and couldn't find it there.
- The fix: Removed implementation of "thd_marker approach". thd->thd_marker was used to determine the
location of subquery predicate: setup_conds() would set accordingly it when making the
{where|on_expr}->fix_fields(...)
call so that AND-parts of the WHERE/ON clauses can determine they are the AND-parts.
Item_cond_or::fix_fields(), Item_func::fix_fields(), Item_subselect::fix_fields (this one was missed),
and all other items-that-contain-items had to reset thd->thd_marker before calling fix_fields() for
their children items, so that the children can see they are not AND-parts of WHERE/ON.
- The "thd_marker approach" required that a lot of code in different locations maintains correct value of
thd->thd_marker, so it was replaced with:
- The new approach with mark_as_condition_AND_part does not keep context in thd->thd_marker. Instead,
setup_conds() now calls
{where|on_expr}->mark_as_condition_AND_part()
and implementations of that function make sure that:
- parts of AND-expressions get the mark_as_condition_AND_part() call
- Item_in_subselect objects record that they are AND-parts of WHERE/ON
First code
- "Asynchronous procedure call" system
- new THD::check_killed() that serves APC request is called from within most important loops
- EXPLAIN code is now able to generate EXPLAIN output on-the-fly [incomplete]
Parts that are still missing:
- put THD::check_killed() call into every loop where we could spend significant amount of time
- Make sure EXPLAIN code works for group-by queries that replace JOIN::join_tab with make_simple_join()
and other such cases.
- User interface: what error code to use, where to get timeout settings from, etc.
thd->user_connect is now handled in thd->clenup() which will ensure that it works in all context (including slaves).
I added also some DBUG_ASSERT() to ensure that things are working correctly.
sql/sql_acl.cc:
Reset thd->user_connect on failed check_for_max_user_connections() to ensure we don't decrement value twice.
Removed not needed call to decrease_user_connections() as thd->cleanup() will now do it.
sql/sql_class.cc:
Call decrease_user_connections() in thd->cleanup()
sql/sql_connect.cc:
Ensure we don't allocate thd->user_connect twice.
Simplify check_for_max_user_connections().
sql/sql_parse.cc:
Ensure that thd->user_connect is handled properly in for 'change_user' command.
There are 2 volatile condition constructions AND/OR constructions and fields(references) when first
good supported to be top elements of conditions because it is normal practice
(see copy_andor_structure for example) fields without any expression in the condition is really rare
and mostly useless case however it could lead to problems when optimiser changes/moves them unaware
of other variables referring to them. An easy solution of this problem is just to replace single field
in a condition with equivalent expression well supported by the server (<field> -> <field> != 0).
mysql-test/r/view.result:
New test added.
mysql-test/t/view.test:
New test added.
sql/sql_parse.cc:
<field> -> <field> != 0
sql/sql_yacc.yy:
<field> -> <field> != 0
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
mysql-test/r/sp_trans.result:
results!
mysql-test/t/sp_trans.test:
Show that CREATE TABLE (called from store routine) heeds
any changes after CREATE SP / parse-time. Show that explicitly
requesting an ENGINE still works.
sql/sql_parse.cc:
If no ENGINE=... was given at parse-time, determine default
engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
If CREATE TABLE is not given ENGINE=..., don't bother
figuring out the default engine during parsing; we'll
do it at execution time instead to be aware of the
latest updates.
- The client gets a progress report message that triggers a callback function if requested with mysql_options(MYSQL_PROGRESS_CALLBACK, function)
- Added Progress field last to 'show processlist'
- Stage, Max_stage and Progress field added to information_schema.progresslist
- The 'mysql' client by defaults enables progress reports when the output is a tty.
- Added progress_report_time time variable to configure how often progress reports is sent to client
Added read only system variable 'in_transaction' which is 1 if we have executed a BEGIN statement.
client/client_priv.h:
Added OPT_REPORT_PROGRESS
client/mysql.cc:
Added option --progress-reports (on by default if not batch mode)
Progress reports is written to stdout for long running commands
include/Makefile.am:
Added mysql/service_progress_report.h
include/myisamchk.h:
Added variables to be able to do progress reporting in Aria and later in MyISAM
include/mysql.h:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql.h.pp:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql/plugin.h:
Added functions for reporting progress.
include/mysql/plugin_auth.h.pp:
Added functions for reporting progress.
include/mysql_com.h:
Added CLIENT_PROGRESS mysql_real_connect() flag.
include/sql_common.h:
Added callback function for reporting progress
mysql-test/r/old-mode.result:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
mysql-test/suite/funcs_1/datadict/datadict_priv.inc:
Added new column
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Test all new PROCESSLIST columns
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_ps.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_ps.result:
Updated results
mysql-test/suite/pbxt/r/pbxt_locking.result:
Updated results
mysql-test/suite/pbxt/r/skip_name_resolve.result:
Updated results
mysql-test/t/old-mode.test:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
plugin/handler_socket/handlersocket/Makefile.am:
Added -lmysqlservices
scripts/mytop.sh:
Made 'State' field width dynamic.
Added 'Progress' to process list display.
sql-common/client.c:
Added handling of progress messages.
Removed check_license() function.
sql/mysql_priv.h:
Added opt_progress_report_time
sql/mysqld.cc:
Added progress_report_time time variable to configure how often progress reports is sent to client
sql/protocol.cc:
Added net_send_progress_packet()
sql/protocol.h:
New prototypes
sql/set_var.cc:
Added variables progress_report_time and in_transaction
sql/sql_acl.cc:
Safety fix: Made client_capabilities ulonglong
sql/sql_class.cc:
Added interface functions for progress reporting
sql/sql_class.h:
Added varibles in THD for progress reporting.
Added CF_REPORT_PROGRESS
sql/sql_load.cc:
Added progress reporting for LOAD DATA INFILE
sql/sql_parse.cc:
Added CF_REPORT_PROGRESS for top level commands for which it's safe to send progress reports to client
sql/sql_show.cc:
Added Progress field last to 'show processlist'
Stage, Max_stage and Progress field added to information_schema.progresslist
sql/sql_table.cc:
Added progress reporting for ALTER TABLE
Added THD as argument to copy_data_between_tables()
storage/maria/ha_maria.cc:
Added progress reporting for check table, repair table, analyze table
Fixed a bug in start_bulk_insert() that caused alter table to always run with all keys enabled.
storage/maria/ma_check.c:
Added progress reporting
Remember old state before starting repair. This removes some warnings from optimize_table if create-with-sort fails.
storage/maria/ma_check_standalone.h:
Added dummy reporting function for standalone Aria programs.
storage/maria/ma_sort.c:
Added progress reporting
storage/maria/maria_chk.c:
Updated version
storage/maria/maria_def.h:
Added new prototypes
tests/mysql_client_test.c:
Added test case for progress reporting
