thd_get_ha_data() can be used without a lock, but only from the
current thd thread, when calling from anoher thread it *must*
be protected by thd->LOCK_thd_data
* fix group commit code to take thd->LOCK_thd_data
* remove innobase_close_connection() from the innodb background thread,
it's not needed after 87775402cd and was failing the assert with
current_thd==0
SI_USER is, however in FreeBSD there are a couple of non-kernel
user signal infomations above SI_KERNEL.
Put a fallback just in case there is nothing available.
The buffer pool refactoring in MDEV-15053 and MDEV-22871 shifted
the performance bottleneck to the page flushing.
The configuration parameters will be changed as follows:
innodb_lru_flush_size=32 (new: how many pages to flush on LRU eviction)
innodb_lru_scan_depth=1536 (old: 1024)
innodb_max_dirty_pages_pct=90 (old: 75)
innodb_max_dirty_pages_pct_lwm=75 (old: 0)
Note: The parameter innodb_lru_scan_depth will only affect LRU
eviction of buffer pool pages when a new page is being allocated. The
page cleaner thread will no longer evict any pages. It used to
guarantee that some pages will remain free in the buffer pool. Now, we
perform that eviction 'on demand' in buf_LRU_get_free_block().
The parameter innodb_lru_scan_depth(srv_LRU_scan_depth) is used as follows:
* When the buffer pool is being shrunk in buf_pool_t::withdraw_blocks()
* As a buf_pool.free limit in buf_LRU_list_batch() for terminating
the flushing that is initiated e.g., by buf_LRU_get_free_block()
The parameter also used to serve as an initial limit for unzip_LRU
eviction (evicting uncompressed page frames while retaining
ROW_FORMAT=COMPRESSED pages), but now we will use a hard-coded limit
of 100 or unlimited for invoking buf_LRU_scan_and_free_block().
The status variables will be changed as follows:
innodb_buffer_pool_pages_flushed: This includes also the count of
innodb_buffer_pool_pages_LRU_flushed and should work reliably,
updated one by one in buf_flush_page() to give more real-time
statistics. The function buf_flush_stats(), which we are removing,
was not called in every code path. For both counters, we will use
regular variables that are incremented in a critical section of
buf_pool.mutex. Note that show_innodb_vars() directly links to the
variables, and reads of the counters will *not* be protected by
buf_pool.mutex, so you cannot get a consistent snapshot of both variables.
The following INFORMATION_SCHEMA.INNODB_METRICS counters will be
removed, because the page cleaner no longer deals with writing or
evicting least recently used pages, and because the single-page writes
have been removed:
* buffer_LRU_batch_flush_avg_time_slot
* buffer_LRU_batch_flush_avg_time_thread
* buffer_LRU_batch_flush_avg_time_est
* buffer_LRU_batch_flush_avg_pass
* buffer_LRU_single_flush_scanned
* buffer_LRU_single_flush_num_scan
* buffer_LRU_single_flush_scanned_per_call
When moving to a single buffer pool instance in MDEV-15058, we missed
some opportunity to simplify the buf_flush_page_cleaner thread. It was
unnecessarily using a mutex and some complex data structures, even
though we always have a single page cleaner thread.
Furthermore, the buf_flush_page_cleaner thread had separate 'recovery'
and 'shutdown' modes where it was waiting to be triggered by some
other thread, adding unnecessary latency and potential for hangs in
relatively rarely executed startup or shutdown code.
The page cleaner was also running two kinds of batches in an
interleaved fashion: "LRU flush" (writing out some least recently used
pages and evicting them on write completion) and the normal batches
that aim to increase the MIN(oldest_modification) in the buffer pool,
to help the log checkpoint advance.
The buf_pool.flush_list flushing was being blocked by
buf_block_t::lock for no good reason. Furthermore, if the FIL_PAGE_LSN
of a page is ahead of log_sys.get_flushed_lsn(), that is, what has
been persistently written to the redo log, we would trigger a log
flush and then resume the page flushing. This would unnecessarily
limit the performance of the page cleaner thread and trigger the
infamous messages "InnoDB: page_cleaner: 1000ms intended loop took 4450ms.
The settings might not be optimal" that were suppressed in
commit d1ab89037a unless log_warnings>2.
Our revised algorithm will make log_sys.get_flushed_lsn() advance at
the start of buf_flush_lists(), and then execute a 'best effort' to
write out all pages. The flush batches will skip pages that were modified
since the log was written, or are are currently exclusively locked.
The MDEV-13670 message "page_cleaner: 1000ms intended loop took" message
will be removed, because by design, the buf_flush_page_cleaner() should
not be blocked during a batch for extended periods of time.
We will remove the single-page flushing altogether. Related to this,
the debug parameter innodb_doublewrite_batch_size will be removed,
because all of the doublewrite buffer will be used for flushing
batches. If a page needs to be evicted from the buffer pool and all
100 least recently used pages in the buffer pool have unflushed
changes, buf_LRU_get_free_block() will execute buf_flush_lists() to
write out and evict innodb_lru_flush_size pages. At most one thread
will execute buf_flush_lists() in buf_LRU_get_free_block(); other
threads will wait for that LRU flushing batch to finish.
To improve concurrency, we will replace the InnoDB ib_mutex_t and
os_event_t native mutexes and condition variables in this area of code.
Most notably, this means that the buffer pool mutex (buf_pool.mutex)
is no longer instrumented via any InnoDB interfaces. It will continue
to be instrumented via PERFORMANCE_SCHEMA.
For now, both buf_pool.flush_list_mutex and buf_pool.mutex will be
declared with MY_MUTEX_INIT_FAST (PTHREAD_MUTEX_ADAPTIVE_NP). The critical
sections of buf_pool.flush_list_mutex should be shorter than those for
buf_pool.mutex, because in the worst case, they cover a linear scan of
buf_pool.flush_list, while the worst case of a critical section of
buf_pool.mutex covers a linear scan of the potentially much longer
buf_pool.LRU list.
mysql_mutex_is_owner(), safe_mutex_is_owner(): New predicate, usable
with SAFE_MUTEX. Some InnoDB debug assertions need this predicate
instead of mysql_mutex_assert_owner() or mysql_mutex_assert_not_owner().
buf_pool_t::n_flush_LRU, buf_pool_t::n_flush_list:
Replaces buf_pool_t::init_flush[] and buf_pool_t::n_flush[].
The number of active flush operations.
buf_pool_t::mutex, buf_pool_t::flush_list_mutex: Use mysql_mutex_t
instead of ib_mutex_t, to have native mutexes with PERFORMANCE_SCHEMA
and SAFE_MUTEX instrumentation.
buf_pool_t::done_flush_LRU: Condition variable for !n_flush_LRU.
buf_pool_t::done_flush_list: Condition variable for !n_flush_list.
buf_pool_t::do_flush_list: Condition variable to wake up the
buf_flush_page_cleaner when a log checkpoint needs to be written
or the server is being shut down. Replaces buf_flush_event.
We will keep using timed waits (the page cleaner thread will wake
_at least_ once per second), because the calculations for
innodb_adaptive_flushing depend on fixed time intervals.
buf_dblwr: Allocate statically, and move all code to member functions.
Use a native mutex and condition variable. Remove code to deal with
single-page flushing.
buf_dblwr_check_block(): Make the check debug-only. We were spending
a significant amount of execution time in page_simple_validate_new().
flush_counters_t::unzip_LRU_evicted: Remove.
IORequest: Make more members const. FIXME: m_fil_node should be removed.
buf_flush_sync_lsn: Protect by std::atomic, not page_cleaner.mutex
(which we are removing).
page_cleaner_slot_t, page_cleaner_t: Remove many redundant members.
pc_request_flush_slot(): Replaces pc_request() and pc_flush_slot().
recv_writer_thread: Remove. Recovery works just fine without it, if we
simply invoke buf_flush_sync() at the end of each batch in
recv_sys_t::apply().
recv_recovery_from_checkpoint_finish(): Remove. We can simply call
recv_sys.debug_free() directly.
srv_started_redo: Replaces srv_start_state.
SRV_SHUTDOWN_FLUSH_PHASE: Remove. logs_empty_and_mark_files_at_shutdown()
can communicate with the normal page cleaner loop via the new function
flush_buffer_pool().
buf_flush_remove(): Assert that the calling thread is holding
buf_pool.flush_list_mutex. This removes unnecessary mutex operations
from buf_flush_remove_pages() and buf_flush_dirty_pages(),
which replace buf_LRU_flush_or_remove_pages().
buf_flush_lists(): Renamed from buf_flush_batch(), with simplified
interface. Return the number of flushed pages. Clarified comments and
renamed min_n to max_n. Identify LRU batch by lsn=0. Merge all the functions
buf_flush_start(), buf_flush_batch(), buf_flush_end() directly to this
function, which was their only caller, and remove 2 unnecessary
buf_pool.mutex release/re-acquisition that we used to perform around
the buf_flush_batch() call. At the start, if not all log has been
durably written, wait for a background task to do it, or start a new
task to do it. This allows the log write to run concurrently with our
page flushing batch. Any pages that were skipped due to too recent
FIL_PAGE_LSN or due to them being latched by a writer should be flushed
during the next batch, unless there are further modifications to those
pages. It is possible that a page that we must flush due to small
oldest_modification also carries a recent FIL_PAGE_LSN or is being
constantly modified. In the worst case, all writers would then end up
waiting in log_free_check() to allow the flushing and the checkpoint
to complete.
buf_do_flush_list_batch(): Clarify comments, and rename min_n to max_n.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_flush_space(): Auxiliary function to look up a tablespace for
page flushing.
buf_flush_page(): Defer the computation of space->full_crc32(). Never
call log_write_up_to(), but instead skip persistent pages whose latest
modification (FIL_PAGE_LSN) is newer than the redo log. Also skip
pages on which we cannot acquire a shared latch without waiting.
buf_flush_try_neighbors(): Do not bother checking buf_fix_count
because buf_flush_page() will no longer wait for the page latch.
Take the tablespace as a parameter, and only execute this function
when innodb_flush_neighbors>0. Avoid repeated calls of page_id_t::fold().
buf_flush_relocate_on_flush_list(): Declare as cold, and push down
a condition from the callers.
buf_flush_check_neighbor(): Take id.fold() as a parameter.
buf_flush_sync(): Ensure that the buf_pool.flush_list is empty,
because the flushing batch will skip pages whose modifications have
not yet been written to the log or were latched for modification.
buf_free_from_unzip_LRU_list_batch(): Remove redundant local variables.
buf_flush_LRU_list_batch(): Let the caller buf_do_LRU_batch() initialize
the counters, and report n->evicted.
Cache the last looked up tablespace. If neighbor flushing is not applicable,
invoke buf_flush_page() directly, avoiding a page lookup in between.
buf_do_LRU_batch(): Return the number of pages flushed.
buf_LRU_free_page(): Only release and re-acquire buf_pool.mutex if
adaptive hash index entries are pointing to the block.
buf_LRU_get_free_block(): Do not wake up the page cleaner, because it
will no longer perform any useful work for us, and we do not want it
to compete for I/O while buf_flush_lists(innodb_lru_flush_size, 0)
writes out and evicts at most innodb_lru_flush_size pages. (The
function buf_do_LRU_batch() may complete after writing fewer pages if
more than innodb_lru_scan_depth pages end up in buf_pool.free list.)
Eliminate some mutex release-acquire cycles, and wait for the LRU
flush batch to complete before rescanning.
buf_LRU_check_size_of_non_data_objects(): Simplify the code.
buf_page_write_complete(): Remove the parameter evict, and always
evict pages that were part of an LRU flush.
buf_page_create(): Take a pre-allocated page as a parameter.
buf_pool_t::free_block(): Free a pre-allocated block.
recv_sys_t::recover_low(), recv_sys_t::apply(): Preallocate the block
while not holding recv_sys.mutex. During page allocation, we may
initiate a page flush, which in turn may initiate a log flush, which
would require acquiring log_sys.mutex, which should always be acquired
before recv_sys.mutex in order to avoid deadlocks. Therefore, we must
not be holding recv_sys.mutex while allocating a buffer pool block.
BtrBulk::logFreeCheck(): Skip a redundant condition.
row_undo_step(): Do not invoke srv_inc_activity_count() for every row
that is being rolled back. It should suffice to invoke the function in
trx_flush_log_if_needed() during trx_t::commit_in_memory() when the
rollback completes.
sync_check_enable(): Remove. We will enable innodb_sync_debug from the
very beginning.
Reviewed by: Vladislav Vaintroub
read TLS with my_thread_var
write TLS with set_mysys_var()
my_thread_var is no longer __attribute__ ((const)): this attribute
is simply incorrect here. Read gcc manual for more information.
sql/threadpool_generic.cc fails with that attribute.
Some .c and .cc files are compiled as part of Mariabackup.
Enabling -Wconversion for InnoDB would also enable it for
Mariabackup. The .h files are being included during
InnoDB or Mariabackup compilation.
Notably, GCC 5 (but not GCC 4 or 6 or later versions)
would report -Wconversion for x|=y when the type is
unsigned char. So, we will either write x=(uchar)(x|y)
or disable the -Wconversion warning for GCC 5.
bitmap_set_bit(), bitmap_flip_bit(), bitmap_clear_bit(), bitmap_is_set():
Always implement as inline functions.
Limit increased from 1000 to 2000.
Avoiding stack overflow by only storing keys and pages on the stack in
recursive functions if there is plenty of space on it.
Other things:
- Use less stack space for b-tree operations as we now only allocate as
much space as needed instead of always allocating HA_MAX_KEY_LENGTH.
- Replaced most usage of my_safe_alloca() in Aria with the stack_alloc
interface.
- Moved my_setstacksize() to mysys/my_pthread.c
A read-only storage engine that stores it's data in (aws) S3
To store data in S3 one could use ALTER TABLE:
ALTER TABLE table_name ENGINE=S3
libmarias3 integration done by Sergei Golubchik
libmarias3 created by Andrew Hutchings
SHOW STATUS LIKE 'Open_files' was showing 18446744073709551615
my_file_opened used statistic_increment/statistic_decrement,
so one-off errors were normal and expected. But they confused
monitoring tools, so let's move my_file_opened to use atomics.
When compiling CMAKE_BUILD_TYPE=Debug WITH_ASAN using clang-7 -O2
the following tests could fail due to insufficient stack size:
main.signal_demo3 sys_vars.max_sp_recursion_depth_func
SIGHUP causes debug info in the error log and reload of
logs/privileges/tables/etc. The server should only do it when
a user intentionally sends SUGHUP, not when a parent terminal gets
disconnected or something.
In particular, not ignoring kernel SIGHUP causes FLUSH PRIVILEGES
at some random point during non-systemd Debian upgrades (Debian
restarts mysqld, debian-start script runs mysql_upgrade in the background,
postinit script ends and kernel sends SIGHUP to all background processes
it has started). And during mysql_upgrade privilege tables aren't
necessarily ready to be reloaded.
pthread_detach_this_thread() was intended to be defined to something
meaningful only on some ancient unixes, which don't have
pthread_attr_setdetachstate() defined. Otherwise, on normal unixes,
threads are created detached in the first place.
This was broken in 0f01bf2676 so that
we started calling pthread_detach() for already detached threads.
Intention was to detach aria checkpoint thread.
However in 87007dc2f7 aria service threads
were made joinable with appropriate handling, which makes breaking
revision unneccessary.
Revert remnants of 0f01bf2676, so that
pthread_detach_this_thread() is meaningful only on some ancient unixes
again.
Use high accuracy timer on Windows 8.1+ for system versioning,it needs
accurate high resoution start query time.
Continue to use the inaccurate (but much faster timer function)
GetSystemTimeAsFileTime() where accuracy does not matter, e.g in
set_timespec_time_nsec(),or my_time()
Handle string length as size_t, consistently (almost always:))
Change function prototypes to accept size_t, where in the past
ulong or uint were used. change local/member variables to size_t
when appropriate.
This fix excludes rocksdb, spider,spider, sphinx and connect for now.
- Added sql/mariadb.h file that should be included first by files in sql
directory, if sql_plugin.h is not used (sql_plugin.h adds SHOW variables
that must be done before my_global.h is included)
- Removed a lot of include my_global.h from include files
- Removed include's of some files that my_global.h automatically includes
- Removed duplicated include's of my_sys.h
- Replaced include my_config.h with my_global.h
Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
