galera_var_wsrep_on_off : Add wait conditions to make sure DDL is
replicated before continuing.
wsrep.[variables|variables_debug] : Remove unnecessary parts
and add check to correct number of variables or skip
galera_ssl_reload: Add version check and SSL checks.
Cluster communication should be possible even when:
1. Node 2 is TCP
2. Node 1/3 is dynamic with SSL enabled
During test we shutdown Node 2 and enable SSL on it. It should connect
back to cluster successfully.
Trigger `socket.ssl_reload` when FLUSH SSL is issued. To triger reloading
of certificate, key and CA, files needs to be physically changed.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
After the merging of MDEV-24915, 10.6 branch has regressions with handling of
concurrent write load against two or more cluster nodes. These regressions may
surface as cluster hanging, node crashes or data inconsistency. With some test
scenarios, the only visible symptom could be that the BF victim aborting happens
only by innodb lock wait timeout expiration. This would result only to poor
performance (by default 50 sec hang for each BF conflict), and could be somewhat
difficult to diagnose.
This pull request has following fixes to handle concurrent write load from
multiple nodes:
In lock_wait_wsrep_kill(), the victim trx was expected to be only in
TRX_STATE_ACTIVE state. With the delayed BF conflict handling, it can happen
that victim has advanced into pre commit state. This was fixed by choosing
victim both in TRX_STATE_ACTIVE and TRX_STATE_PREPARED states.
Victim transaction may be in several different states at the time of detected
lock conflict, and due to delayed BF aborting practice in MDEV-24915, the victim
may advance further before the actual BF aborting takes place. The BF aborting
in MDEV-24915 did not wake the victim, if it was in the state of waiting for
some other lock (than the one that was blocking the high priority thread).
This anomaly caused the innodb lock wait timeout expiration delays and poor
performance symptom. To fix this, lock_wait_wsrep_kill() now looks if
victim is in lock waiting state, and uses lock_cancel_waiting_and_release()
to cancel this lock wait.
wsrep_bf_abort() checks if the victim has active transaction (in wsrep-lib),
and starts a new transaction if there was no active transaction before.
Due to late BF aborting, the victim may have e.g. failed in certification
and is already aborting or has aborted at this stage. This has caused
problems in testing where BF aborter tries to BF abort himself.
The fix in wsrep_bf_abort() now skips the BF abort, if victim is aborting
or has aborted. Victim may not have started transaction yet in wsrep context,
but it may have acquired MDL locks (due to DDL execution), and this has
caused BF conflict. Such case does not require aborting in wsrep or
replication provider state.
BF aborting could cause BF-BF conflict scenario, if victim was already aborted
and changed to replayer having high priority as well. This BF-BF conflict
scenario is now avoided in lock_wait_wsrep() where we now check if blocking
lock holder is also high priority and is ordered before, caller should wait
for the lock in this situation.
The natural innodb deadlock resolving algorithm could pick BF thread as
deadlock victim. This is fixed by giving max weigh to BF threads in
Deadlock::report().
MDEV-24341 has changed excution paths in do_command() and this affects BF
aborted victim execution. This PR fixes one assert in do_command():
DBUG_ASSERT(!thd->async_state.pending_ops())
Which fired if the thd was BF aborted earlier. This assert is now changed
to allow pending_ops() if thd was BF aborted before.
With these fixes, long term highly conflicting write load could be run against
to node cluster. If binlogging is configured, log_slave_updates should be
also set.
`WSREP_CLIENT` is used as condition for starting ALTER/OPTIMIZE/REPAIR TOI.
Using this condition async replicated affected DDL's will not be replicated.
Fixed by removing this condition.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Test galera_parallel_apply_3nodes started to failed occasionally.
The test assumes that one round of autocommit retry is sufficient in
order to avoid a deadlock error when two conflicting UPDATE statements
run concurrently.
This assumption no longer holds after galera library has changed
last_committed() to return the seqno of the last transaction that left
apply monitor, rather than commit monitor. So it is possible that
after a BF abort, a command is re-executed before it's BF abortee has
left the apply monitor. Thus causing another retry or a deadlock error.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
Forcing wait on nodes 2 and 3, to turn wsrep_ready to 'ON' before querying wsrep status variables.
This guarantees that status reads don't come too early on these nodes
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
* Collect and pass apply error data to provider
* Rollback failed transaction and continue operation if provider returns
SUCCESS
* MTR tests for inconsistency voting
* MDEV-18565: Galera mtr-suite fails if galera library is not installed
Currently, running mtr with an incorrect (for example, new or
obsolete) version of wsrep_provider (for example, with the 26
version of libgalera_smm.so) leads to the failure of tests in
several suites with vague error diagnostics.
As for the galera_3nodes suite, the mtr also does not effectively
check all the prerequisites after merge with MDEV-18426 fixes.
For example, tests that using mariabackup do not check for presence
of ss and socat/nc. This is due to improper handling of relative
paths in mtr scripts.
In addition, some tests in different suites can be run without
setting the environment variables such as MTR_GALERA_TFMT, XBSTREAM,
and so on.
To eliminate all these issues, this patch makes the following changes:
1. Added auxiliary wsrep_mtr_check utility (which located in the
mysql-test/lib/My/SafeProcess subdirectory), which compares the
versions of the wsrep API that used by the server and by the wsrep
provider library, and it does this comparison safely, without
accessing the API if the versions do not match.
2. All checks related to the presence of mariabackup and utilities
that necessary for its operation transferred from the local directories
of different mtr suites (from the suite.pm files) to the main suite.pm
file. This not only reduces the amount of code and eliminates duplication
of identical code fragments, but also avoids problems due to the inability
of mtr to consider relative paths to include files when checking skip
combinations.
3. Setting the values of auxiliary environment variables that
are necessary for Galera, SST scripts and mariabackup (to work
properly) is moved to the main mysql-test-run.pl script, so as
not to duplicate this code in different suites, and to avoid
partial corrections of the same errors for different suites
(while other suites remain uncorrected).
4. Fixed duplication of the have_file_key_management.inc and
have_filekeymanagement.inc files between different suites,
these checks are also transferred to the top level.
https://jira.mariadb.org/browse/MDEV-18565
* Build without additional utility in configurations without wsrep support
