Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
procedures causes crashes!
The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.
Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).
While reading a binary log that is being used by a master or was not properly
closed, most likely due to a crash, the following warning message is being
printed out: "Warning: this binlog was not closed properly. Most probably mysqld
crashed writing it.". This was scaring our users as the message was not taking
into account the possibility of the file is being just used by the master.
To avoid unnecessarily scaring our users, we replace the original message by the
following one: Warning: "this binlog is either is use or was not closed properly.".
with gcc 4.3.2
Compiling MySQL with gcc 4.3.2 and later produces a number of
warnings, many of which are new with the recent compiler
versions.
This bug will be resolved in more than one patch to limit the
size of changesets. This is the first patch, fixing a number
of the warnings, predominantly "suggest using parentheses
around && in ||", and empty for and while bodies.
BEGIN/COMMIT/ROLLBACK was subject to replication db rules, and
caused the boundary of a transaction not recognized correctly
when these queries were ignored by the rules.
Fixed the problem by skipping replication db rules for these
statements.
When the thread executing a DDL was killed after finished its
execution but before writing the binlog event, the error code in
the binlog event could be set wrongly to ER_SERVER_SHUTDOWN or
ER_QUERY_INTERRUPTED.
This patch fixed the problem by ignoring the kill status when
constructing the event for DDL statements.
This patch also included the following changes in order to
provide the test case.
1) modified mysqltest to support variable for connection command
2) modified mysql-test-run.pl, add new variable MYSQL_SLAVE to
run mysql client against the slave mysqld.
Signed integer format specifier forced to print the binlog header with server_id
negative if the unsigned value sets the sign-bit ON.
Fixed with correcting the specifier to correspond to typeof(server_id) == ulong.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
On certain kinds of errors (e.g., out of stack), a call to Item_func_
set_user_var::fix_fields() might fail. Since the return value of this
call was not checked inside User_var_log_event::exec_event(), continuing
execution after this will cause a crash inside Item_func_set_user_var::
update_hash().
The bug is fixed by aborting execution of the event with an error if
fix_fields() fails, since it is not possible to continue execution anyway.
log-slave-updates and circul repl
Slave SQL thread may execute one extra event when there are events
skipped by slave I/O thread (e.g. originated by the same server).
Whereas it was requested not to do so by the UNTIL condition.
This happens because we compare with the end position of previously
executed event. This is fine when there are no skipped by slave I/O
thread events, as end position of previous event equals to start
position of to be executed event. Otherwise this position equals to
start position of skipped event.
This is fixed by:
- reading the event to be executed before checking if the until condition
is satisfied.
- comparing the start position of the event to be executed. Since we do
not have the start position available, we compute it by subtracting
event length from end position (which is available).
- if there are no events on the event queue at the slave sql starting
time, that meet until condition, we stop immediately, as in this
case we do not want to wait for next event.
Now, every transaction (including autocommit transactions) start with
a BEGIN and end with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.
The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.
Start a newline before appending delimiter after a query string
When running mysqlbinlog on a 64-bit machine with a corrupt relay log,
it causes mysqlbinlog to crash. In this case, the crash is caused
because a request for 18446744073709534806U bytes is issued, which
apparantly can be served on a 64-bit machine (speculatively, I assume)
but this causes the memcpy() issued later to copy the data to segfault.
The request for the number of bytes is caused by a computation
of data_len - server_vars_len where server_vars_len is corrupt in such
a sense that it is > data_len. This causes a wrap-around, with the
the data_len given above.
This patch adds a check that if server_vars_len is greater than
data_len before the substraction, and aborts reading the event in
that case marking the event as invalid. It also adds checks to see
that reading the server variables does not go outside the bounds
of the available space, giving a limited amount of integrity check.
Query_log_event::error_code
A query can perform completely having the local var error of mysql_$query
zero, where $query in insert, update, delete, load,
and be binlogged with error_code e.g KILLED_QUERY while there is no
reason do to so.
That can happen because Query_log_event consults thd->killed flag to
evaluate error_code.
Fixed with implementing a scheme suggested and partly implemented at
time of bug@22725 work-on. error_status is cached immediatly after the
control leaves the main rows-loop and that instance always corresponds
to `error' the local of mysql_$query functions. The cached value
is passed to Query_log_event constructor, not the default thd->killed
which can be changed in between of the caching and the constructing.
Report claims that Seconds_behind_master behaves unexpectedly.
Code analysis shows that there is an evident flaw in that treating of FormatDescription event is wrong
so that after FLUSH LOGS on slave the Seconds_behind_master's calculation slips and incorrect
value can be reported to SHOW SLAVE STATUS.
Even worse is that the gap between the correct and incorrect deltas grows with time.
Fixed with prohibiting changes to rpl->last_master_timestamp by artifical events (any kind of).
suggestion as comments is added how to fight with lack of info on the slave side by means of
new heartbeat feature coming.
The test can not be done ealily fully determistic.
restores from mysqlbinlog out
Problem: using "mysqlbinlog | mysql" for recoveries the connection_id()
result may differ from what was used when issuing the statement.
Fix: if there is a connection_id() in a statement, write to binlog
SET pseudo_thread_id= XXX; before it and use the value later on.
Occasionally mysqlbinlog --hexdump failed with error:
ERROR 1064 (42000) at line ...: You have an error in your
SQL syntax; check the manual that corresponds to your MySQL
server version for the right syntax to use near
'Query thread_id=... exec_time=... error_code=...
When the length of hexadecimal dump of binlog header was
divisible by 16, commentary sign '#' after header was lost.
The Log_event::print_header function has been modified to always
finish hexadecimal binlog header with "\n# ".
slave_sql thread calls thd->clear_error() to force error to be ignored,
though this method didn't clear thd->killed state, what causes
slave_sql thread to stop.
clear thd->killed state if we ignore an error
The reason for the bug was that replaying of a query on slave could not be possible since its event
was recorded with the killed error. Due to the specific of handling INSERT, which per-row-while-loop is
unbreakable to killing, the query on transactional table should have not appeared in binlog unless
there was a call to a stored routine that got interrupted with killing (and then there must be an error
returned out of the loop).
The offered solution added the following rule for binlogging of INSERT that accounts the above
specifics:
For INSERT on transactional-table if the error was not set the only raised flag
is harmless and is ignored via masking out on time of creation of binlog event.
For both table types the combination of raised error and KILLED flag indicates that there
was potentially partial execution on master and consistency is under the question.
In that case the code continues to binlog an event with an appropriate killed error.
The fix relies on the specified behaviour of stored routine that must propagate the error
to the top level query handling if the thd->killed flag was raised in the routine execution.
The patch adds an arg with the default killed-status-unset value to Query_log_event::Query_log_event.
The issue found with bug 25411 is due to the function skip_rear_comments()
which damages the source code while implementing a work around.
The root cause of the problem is in the lexical analyser, which does not
process special comments properly.
For special comments like :
[1] aaa /*!50000 bbb */ ccc
since 5.0 is a version older that the current code, the parser is in lining
the content of the special comment, so that the query to process is
[2] aaa bbb ccc
However, the text of the query captured when processing a stored procedure,
stored function or trigger (or event in 5.1), can be after rebuilding it:
[3] aaa bbb */ ccc
which is wrong.
To fix bug 25411 properly, the lexical analyser needs to return [2] when
in lining special comments.
In order to implement this, some preliminary cleanup is required in the code,
which is implemented by this patch.
Before this change, the structure named LEX (or st_lex) contains attributes
that belong to lexical analysis, as well as attributes that represents the
abstract syntax tree (AST) of a statement.
Creating a new LEX structure for each statements (which makes sense for the
AST part) also re-initialized the lexical analysis phase each time, which
is conceptually wrong.
With this patch, the previous st_lex structure has been split in two:
- st_lex represents the Abstract Syntax Tree for a statement. The name "lex"
has not been changed to avoid a bigger impact in the code base.
- class lex_input_stream represents the internal state of the lexical
analyser, which by definition should *not* be reinitialized when parsing
multiple statements from the same input stream.
This change is a pre-requisite for bug 25411, since the implementation of
lex_input_stream will later improve to deal properly with special comments,
and this processing can not be done with the current implementation of
sp_head::reset_lex and sp_head::restore_lex, which interfere with the lexer.
This change set alone does not fix bug 25411.
- Improve error handling for "out of memory" problems when master is
sending logs to slave. If memory allocation fails the log should
now report error "memory allocation failed reading log event"
fixes).
The legend: on a replication slave, in case a trigger creation
was filtered out because of application of replicate-do-table/
replicate-ignore-table rule, the parsed definition of a trigger was not
cleaned up properly. LEX::sphead member was left around and leaked
memory. Until the actual implementation of support of
replicate-ignore-table rules for triggers by the patch for Bug 24478 it
was never the case that "case SQLCOM_CREATE_TRIGGER"
was not executed once a trigger was parsed,
so the deletion of lex->sphead there worked and the memory did not leak.
The fix:
The real cause of the bug is that there is no 1 or 2 places where
we can clean up the main LEX after parse. And the reason we
can not have just one or two places where we clean up the LEX is
asymmetric behaviour of MYSQLparse in case of success or error.
One of the root causes of this behaviour is the code in Item::Item()
constructor. There, a newly created item adds itself to THD::free_list
- a single-linked list of Items used in a statement. Yuck. This code
is unaware that we may have more than one statement active at a time,
and always assumes that the free_list of the current statement is
located in THD::free_list. One day we need to be able to explicitly
allocate an item in a given Query_arena.
Thus, when parsing a definition of a stored procedure, like
CREATE PROCEDURE p1() BEGIN SELECT a FROM t1; SELECT b FROM t1; END;
we actually need to reset THD::mem_root, THD::free_list and THD::lex
to parse the nested procedure statement (SELECT *).
The actual reset and restore is implemented in semantic actions
attached to sp_proc_stmt grammar rule.
The problem is that in case of a parsing error inside a nested statement
Bison generated parser would abort immediately, without executing the
restore part of the semantic action. This would leave THD in an
in-the-middle-of-parsing state.
This is why we couldn't have had a single place where we clean up the LEX
after MYSQLparse - in case of an error we needed to do a clean up
immediately, in case of success a clean up could have been delayed.
This left the door open for a memory leak.
One of the following possibilities were considered when working on a fix:
- patch the replication logic to do the clean up. Rejected
as breaks module borders, replication code should not need to know the
gory details of clean up procedure after CREATE TRIGGER.
- wrap MYSQLparse with a function that would do a clean up.
Rejected as ideally we should fix the problem when it happens, not
adjust for it outside of the problematic code.
- make sure MYSQLparse cleans up after itself by invoking the clean up
functionality in the appropriate places before return. Implemented in
this patch.
- use %destructor rule for sp_proc_stmt to restore THD - cleaner
than the prevoius approach, but rejected
because needs a careful analysis of the side effects, and this patch is
for 5.0, and long term we need to use the next alternative anyway
- make sure that sp_proc_stmt doesn't juggle with THD - this is a
large work that will affect many modules.
Cleanup: move main_lex and main_mem_root from Statement to its
only two descendants Prepared_statement and THD. This ensures that
when a Statement instance was created for purposes of statement backup,
we do not involve LEX constructor/destructor, which is fairly expensive.
In order to track that the transformation produces equivalent
functionality please check the respective constructors and destructors
of Statement, Prepared_statement and THD - these members were
used only there.
This cleanup is unrelated to the patch.
This patch fixes problem that LOAD DATA could use different
character sets when loading files on master and on slave sides:
- Adding replication of thd->variables.collation_database
- Adding optional character set clause into LOAD DATA
Note, the second way, with explicit CHARACTER SET clause
should be the recommended way to load data using an alternative
character set.
The old way, using "SET @@character_set_database=xxx" should be
gradually depricated.
to a single statement.
---
Bug#24795: SHOW PROFILE
Profiling is only partially functional on some architectures. Where
there is no getrusage() system call, presently Null values are
returned where it would be required. Notably, Windows needs some love
applied to make it as useful.
Syntax this adds:
SHOW PROFILES
SHOW PROFILE [types] [FOR QUERY n] [OFFSET n] [LIMIT n]
where "n" is an integer
and "types" is zero or many (comma-separated) of
"CPU"
"MEMORY" (not presently supported)
"BLOCK IO"
"CONTEXT SWITCHES"
"PAGE FAULTS"
"IPC"
"SWAPS"
"SOURCE"
"ALL"
It also adds a session variable (boolean) "profiling", set to "no"
by default, and (integer) profiling_history_size, set to 15 by
default.
This patch abstracts setting THDs' "proc_info" behind a macro that
can be used as a hook into the profiling code when profiling
support is compiled in. All future code in this line should use
that mechanism for setting thd->proc_info.
---
Tests are now set to omit the statistics.
---
Adds an Information_schema table, "profiling" for access to
"show profile" data.
---
Merge zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community-3--bug24795
into zippy.cornsilk.net:/home/cmiller/work/mysql/mysql-5.0-community
---
Fix merge problems.
---
Fixed one bug in the query_source being NULL.
Updated test results.
---
Include more thorough profiling tests.
Improve support for prepared statements.
Use session-specific query IDs, starting at zero.
---
Selecting from I_S.profiling is no longer quashed in profiling, as
requested by Giuseppe.
Limit the size of captured query text.
No longer log queries that are zero length.
