This commit adds a new 'no-sni' option to socat which is required to
properly authenticate with newer socat versions (after version 1.7.4+).
This option is needed to disable the automatic use of the SNI feature
(Server Name Indication) since the SST script directly specifies the
commonname if necessary and automatic activation of the SNI feature
is unnecessary in such scenarios.
Renaming the default MariaDB backup directory from
xtrabackup_backupfiles to mariadb_backup_files.
Renaming files:
- xtrabackup_binlog_info to mariadb_backup_binlog_info
- xtrabackup_checkpoints to mariadb_backup_checkpoints
- xtrabackup_galera_info to mariadb_backup_galera_info
- xtrabackup_info to mariadb_backup_info
- xtrabackup_slave_info to mariadb_backup_slave_info
This commit adds support for the --aria-log-dir-path
option on the command line and for the aria-log-dir-path
option in the configuration file to the SST scripts, since
before this change these parameters were completely ignored
during SST - SST scripts assumed that aria logs files are
always located in the same directory as logs for innodb.
Tests for this change will be added as a separate commit,
along with tests for MDEV-30157 and MDEV-28669.
This commit adds even more correct handling of parameters
with paths when they contain leading or trailing spaces and/or
slashes. Also it fixes problems that occur when the user specified
explicit paths to additional directories, but these paths match
the specified path of the data directory - in this case, additional
subdirectories should be treated (in relation to the data directory)
in the same way as if these paths were not specified or as if they
are implicitly specified as "." or "./". But prior to this fix,
existing code treated any values as if they were completely
separate directories, whether or not they actually point to the
same location to which datadir points to - and this sometimes
resulted in incorrect file transfers.
This fix does not contain separate tests, as tests will be
part of the main commit(s). This fix has been made as a separate
commit to facilitate review for major substantive fixes related
to MDEV-30157 and MDEV-28669.
This commit restores defaults and functionality regarding binlogs
to the way it was prior to MDEV-27524. The mariabackup utility no
longer saves binlogs files as part of a backup without the --galera-info
option. However, since we use --galera-info during SST, the behavior
of mariabackup changes and, in combination with GTIDs support enabled,
mariabackup transfers one (most recent) binlog file obtained after
FLUSH BINARY LOGS. In other cases, binlogs are not transferred during
SST in mariabackup mode. As for SST in the rsync mode, it works the
same way as before MDEV-27524 - by default it transfers one last
binlog file.
The --sst-max-binlogs option for mariabackup and the sst_max_binlogs
parameter in the [sst] / server sections are no longer supported for
SST via mariabackup.
This commit contains workaround for a bug known as 'Red Hat issue 1870279'
(connection reset by peer issue in socat versions 1.7.3.3 to 1.7.4.0) which
further causes crashes during SST using mariabackup (when openssl is used).
Also fixed broken logic of automatic generation of the Diffie-Hellman parameters
for socat version less than 1.7.3 (which defaults to 512-bit values instead of
2048-bit ones).
This commit sends a flag indicating the presence of the "--bypass"
option from the donor node to the joiner nodes during rsync IST,
because without such a flag it is impossible to distinguish IST
from the SST on the joiner nodes (in IST/SST scripts, because the
"--bypass" option is still not passed to scripts from server code).
Specifically, this fixes an issue with binary logs disappearing
after IST (via rsync). There are also changes to diagnostic messages
here that will make it easier to diagnose script-related problems
in the future when debugging and when checking the logs. This commit
also adds more robust signal handlers - to handle exceptions during
script execution. These handlers won't mask some crashes and it
also unifies exit codes between different scripts. These changes
have already been helpful to debugging "bypass" flag handling.
This commit fixes an issue with IST handling in
version 10.9 which is a regression after MDEV-26971
and related to trying to get a non-existent "total"
tag on the IST branch (this tag is only defined in
SST mode).
This commit fixes problems with parsing ipv6 addresses given via
the wsrep_sst_receive_address and wsrep_node_address options.
Also, this commit removes extra lines in the configuration files
in the mtr test suites for Galera related to these parameters.
Currenly SST script for mariabackup stops on any failure while archiving
logs, e.g. when unable to create directory, insufficient permissions, gzip
failure, etc. However, in case of such problems, the script should issue
a warning and continue without archiving, but not exit with a fatal error.
This commit adds this fix to the SST script for mariabackup.
This commit contains a fix to use modern syntax for selecting
character classes in the tr utility options.
Also one of the tests for SST via rsync (galera_sst_rysnc2) is made
more reliable (to avoid rare failures during automatic testing).
This commit adds validation of the values of the ssl-mode parameter
in SSL scripts, since now only a basic check for the presence of the
"VERIFY_" prefix is performed there to detect "VERIFY_IDENTITY" and
"VERIFY_CA", but all other values are not checked at all.
In addition, this commit removes leading and trailing spaces from
parameter values that SST scripts read from configuration files or
from the command line so that they do not interfere with parameter
checks and substitutions. Parameter substitution has been made more
robust against characters in strings that the shell might erroneously
interpret as regexp.
This commit fixes problems due to bugs and quirks in bsdtar
(the FreeBSD version of tar). Separate tests are not required,
because without these fixes, many other tests fail when tested
in the FreeBSD environment.
Also, the grep patterns for reading utility version numbers
has been made more robust. The notation of some options of
the "cut" utility has been changed.
This commit adds correct handling of binlogs for SST using rsync
or mariabackup. Before this fix, binlogs were handled incorrectly -
- only one (last) binary log file was transferred during SST, which
then led to various failures (for example, when trying to list all
events from the binary log). These bugs were long masked by flaws
in the primitive binlogs handling code in the SST scripts, which
causing binary logs files to be erased after transfer or not added
to the binlog index on the joiner node. Now the correct transfer
of all binary logs (not just the last of the binary log files) has
been implemented both for the rsync (at the script level) and for
the mariabackup (at the level of the main utility code).
This commit also adds a new sst_max_binlogs=<n> parameter, which
can be located in the [sst] section or in the [xtrabackup] section
(historically, supported for mariabackup only, not for rsync), or
in one of the server sections. This parameter specifies the number
of binary log files to be sent to the joiner node during SST. This
option is added for compatibility with old SST scripting behavior,
which can be emulated by setting the sst_max_binlogs=1 (although
in general this can cause problems for the reasons described above).
In addition, setting the sst_max_binlogs=0 can be used to suppress
the transmission of binary logs to the joiner nodes during SST
(although sometimes a single file with the current binary log can
still be transmitted to the joiner, even with sst_max_binlogs=0,
because this sometimes necessary in modes that involve the use of
GTIDs with Galera).
Also, this commit ensures correct handling of paths to various
innodb files and directories in the SST scripts, and fixes some
problems with this that existed in mariabackup utility (which
were associated with incorrect handling of the innodb_data_dir
parameter in some scenarios).
In addition, this commit contains the following enhancements:
1) Added tests for mtr, which check the correct work with binlogs
after SST (using rsync and mariabackup);
2) Added correct handling of slashes at the end of all paths that
the SST script receives as parameters;
3) Improved parsing code for --mysqld-args parameters. Now it
correctly processes the sequence "--" after the name of the
one-letter option;
4) Checking the secret signature during joiner authentication
is made independent of presence of bash (as a unix shell)
in the system and diff utility no longer needed to check
certificates compliance;
5) All directories that are necessary for the correct placement
of various logs are automatically created by SST scripts in
advance (before running mariabackup on the joiner node);
6) Removal of old binary logs on joiner is done using the binlog
index (if it exists) (not only by fixed pattern that based
on the current binlog name, as before);
7) Paths for placing binary logs are correctly processed if they
are set as relative paths (to the datadir);
8) SST scripts are made even more resistant to spaces in filenames
(now for binlogs);
9) In case of failure, SST scripts now always end with an exit
code other than zero;
10) SST script for rsync now correctly create a tar file with
the binlogs, even if the paths to them (in the binlog index
file) are specified as a mix of absolute and relative paths,
and even if they do not match with the datadir path specified
in the current configuration settings.
- Changed SST scripts to use /usr/bin/env bash instead of
/bin/bash for better portability.
- Fixed use of mktemp on non-Linux platforms to produce
temporary file instead of directory.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>
This is the first part of the fixes for MDEV-24097. This commit
contains the fixes for instability when testing Galera and when
restarting nodes quickly:
1) Protection against a "stuck" old SST process during the execution
of the new SST (after restarting the node) is now implemented for
mariabackup / xtrabackup, which should help to avoid almost all
conflicts due to the use of the same ports - both during testing
with mtr, so and when restarting nodes quickly in a production
environment.
2) Added more protection to scripts against unexpected return of
the rc != 0 (in the commands for deleting temporary files, etc).
3) Added protection against unexpected crashes during binlog transfer
(in SST scripts for rsync).
4) Spaces and some special characters in binlog filenames shouldn't
be a problem now (at the script level).
5) Daemon process termination tracking has been made more robust
against crashes due to unexpected termination of the previous SST
process while new scripts are running.
6) Reading ssl encryption parameters has been moved from specific
SST scripts to a common wsrep_sst_common.sh script, which allows
unified error handling, unified diagnostics and simplifies script
revisions in the future.
7) Improved diagnostics of errors related to the use of openssl.
8) Corrections have been made for xtrabackup-v2 (both in tests and in
the script code) that restore the work of xtrabackup with updated
versions of innodb.
9) Fixed some tests for galera_3nodes, although the complete solution
for the problem of starting three nodes at the same time on fast
machines will be done in a separate commit.
No additional tests are required as this commit fixes problems with
existing tests.
1. Galera SST scripts should use ssl_capath (not ssl_ca) for CA
directory. The current implementation tries to automatically
detect the path using the trailing slash in the ssl_ca variable
value, but this approach is not compatible with the server
configuration. Now, by analogy with the server, SST scripts
also use a separate ssl_capath variable. In addition, a similar
tcapath variable has been added for the old-style configuration
(in the "sst" section).
2. Openssl utility detection made more reliable.
3. Removed extra spaces in automatically generated command lines -
to simplify debugging of the SST scripts.
4. In general, the code for detecting the presence or absence of
auxiliary utilities has been improved - it is made more reliable
in some configurations (and for shells other than bash).
Currently, SST scripts assume that the filename specified in
the --log-bin-index argument either does not contain an extension
or uses the standard ".index" extension. Similar assumptions are
used for the log_bin_index parameter read from the configuration
file. This commit adds support for arbitrary extensions for the
index file paths.
If the server is started with the --innodb-force-recovery argument
on the command line, then during SST this argument can be passed to
mariabackup only at the --prepare stage, and accordingly it must be
removed from the --mysqld-args list (and it is not should be passed
to mariabackup otherwise).
This commit fixes a flaw in the SST scripts and add a test that
checks the ability to run the joiner node in a configuration that
uses --innodb-force-recovery=1.
Fixed flaws with overly strict or, conversely,
overly soft verification of certificates in some
scenarios:
1. Removed the check that the 'commonname' (CN) in the
certificate matches the 'localhost' value on the side
of the joiner node, which was performed earlier, even
if the address was received by the script only as an
argument (out of the exchange via the Galera protocol) -
since for the joining node this argument always contains
its own local address, not the address of the remote host,
so it is always treated as 'localhost', which is not
necessarily true (outside of mtr testing);
2. Removed checking the domain name or IP-address of the
peer node in the encrypt=2 mode;
3. Fixed checking of compliance of certificates when
rsync SST is used;
4. Added the ability to specify CA not only as a file,
but also as a path to the directory where the certificates
are stored. To do this, the user just needs to specify the
path to this directory as the value ssl-ca or tca parameter,
ending with the '/' character.
SST scripts currently use Linux-specific construction
to create a temporary directory if the path prefix for
that directory is specified by the user. This does not
work with FreeBSD. This commit adds support for FreeBSD.
No separate test required.
This commit adds support for reading new SSL configuration
options (ssl-ca, ssl-cert and ssl-key) if the [sst] section
with old options (tca, tcert and tkey) is missing in the config
file, even if not specified authentication mode via the ssl-mode
option. Before this change, new parameters were read only if the
ssl-mode option was present in the configuration file and it was
not equal to the 'DISABLED' value.
Also added diagnostics (information level) which warns the user
that due to the presence of the tca, tcert and/or tkey parameters
in the [sst] section, new SSL configuration options will be ignored
(if their values do not match the old ones).
Fixed typo in variable name that breaks SST in some scenatios.
Also fixed one small inaccuracy after MDEV-25978 which leads
to the use of an uninitialized variable when the --log-bin
option is specified without an argument.
Additional improvements aimed at improving operational
reliability of the SST scripts:
1) Script need to give rsync and stunnel a short time to
terminate after "kill -9" before the first PID check
using ps utility;
2) The temporary file used to create the binlog index could
sometimes remain in the data directory if tar failed and
then may be reused without being cleaned up (the next
time when SST was run) - now it's fixed;
3) The temporary file used to build the binlog index is now
created using mktemp and, if this variable is present in
the configuration file, in tmpdir;
4) Checking the secret tag in SST via rsync is made faster
and does not require creating a temporary file, which
could remain in the data directory in case of failure;
5) Added "-F" option to grep to check the tag when using
mariabackup/xtrabackup-v2 - to avoid possible collisions
in case of special characters in the tag value (unlikely
scenario, but the new check is more reliable).
This commit reduces the likelihood of getting a busy port on
quick restarts with rsync SST (problem MDEV-25818) and fixes
a number of other flaws in SST scripts, adds new functionality,
and also synchronizes the xtrabackup-v2 script with the
mariabackup script (the latter applies only to the 10.2 branch):
1) SST via rsync: rsync and stunnel does not always get the right
time to complete by correctly handling SIGTERM. These utilities
are now given more time to complete normally (via normal SIGTERM
processing) before we move on to using "kill -9";
2) SST via rsync: attempts to terminate an rsync or stunnel process
(via "kill" utility) are only made if it did not terminated on
its own;
3) SST via rsync: if a combination of stunnel and rsync is used,
then we need to wait for both utilities to finish or stop, not
just one of them;
4) The config file and pid file for stunnel are now deleted after
successful completion of SST on the donor node;
5) The configs and pid files from rsync and stunnel should not be
deleted unless these utilities succeed (or are sucessfully
terminated) on the joiner node;
6) The configs and pid files now excluded from transfer via rsync;
7) Spaces in paths are now valid for config files as well (when
used with SST via rsync or mariabackup / xtrabackup[-v2]);
8) SST via mariabackup: added preliminary verification of keys and
certificates that are used when establishing a connection using
SSL (to avoid long timeouts and improve diagnostics) - by analogy
with how it is done for the xtrabackup-v2 (plus check for CA file),
while that check is skipped if the user does not have openssl
installed (or does not have diff utility);
9) Added backup-threads=<n> configuration option which adds
"--parallel=<n>" for mariabackup / xtrabackup at backup and
move-back stages;
10) Added encrypt-threads and encrypt-chunk-size configuration
options for xbcrypt management (when xbcrypt is used);
11) Small optimization: checking the socat version and adding
a file with parameters for 2048-bit Diffie-Hellman (if necessary)
is done only if the user has not specified "dhparam=" in the
"sockopt" option value;
12) SST via rsync now supports "backup-threads" configuration option
(in server-related sections or in the "[sst]");
13) Determining the number of available processors is now supported
for FreeBSD + mariabackup/xtrabackup: before that we might have
problems with "--compact" (rebuild indexes) or qpress on FreeBSD;
14) The check_pid() function should not raise an error state in
the rare cases when the pid file was created, but it is empty,
or if it is deleted right during the check, or when zero is read
from the pid file;
15) Iproved templates that are used to check if a requested socket
is "listening" when using the ss utility;
16) Shortened some other templates for socket state utilities;
17) Temporary files created by mariabackup / xtrabackup are moved
to a separate subdirectory inside tmpdir (so they don't get
mixed with other temporary files, which can make debugging
more difficult);
18) 10.2 only: the script for SST via xtrabackup-v2 has been brought
in full compliance with all the bugfixes made for mariabackup (as
it previously contained many flaws compared to the updated script
for mariabackup).
The following features have been added:
1) Automatic addition of the pf = ip6 option for socat
when it can be recognized by the format of the connection
address;
2) Automatically add or remove extra commas at the beginning
and at the end of sockopt, for example, sockopt='pf=ip6'
and sockopt=',pf=ip6' work equally well;
Also, due to interference in the code of the get_transfer()
function, I also refactored it and now:
3) encrypt = 4 is supported not only for xtrabackup-v2,
but also for mariabackup - this can help with migration
from Percona;
4) Improved setting of 'commonname' option for encrypt=3
and encrypt=4 modes;
mbstream is already supported as a format name after MDEV-24580,
but additional code refactoring has been done to correctly display
the format name in log files and to check if the mbstream utility
is in the path. Also, for xtrabackup-v2 (only available in the 10.2)
both utilities are supported - both xbstram and mbstream, since they
are interchangeable in this context. In this case, the original
innobackupex always receives the correct --stream=xbstream option
as input, but the user can actually try to use the mbstream utility
during the transfer (if the user explicitly specifies this in the
configuration file).
Another batch of changes that should make the SST process
more reliable in all scenarios:
1) Added hostname or CN verification when stunnel is used
with certificate chain verification (verifyChain = yes);
2) Added check for the absence of the stunnel utility for
mtr tests;
3) Deletion of working files before and after SST is done
more accurately;
4) rsync on joiner can be run even if the path to its
configuration file contains spaces;
5) More accurate directory creation (for data files and
for logs);
6) IST with mysqldump no longer turns off statement logging;
7) Reset password for mysqldump when password is empty but
username is specified;
8) More reliable quoting when generating statements in
wsrep_sst_mysqldump;
9) Added explicit generation of 2048-bit Diffie-Hellman
parameters for sockat < 1.7.3, by analogy with xtrabackup;
10) Compression parameters for qpress are read from all
suitable server groups in configuration file, as well as
from the [sst] and [xtrabackup] groups;
11) Added a test that checks compression using qpress;
12) Checking for optional utilities is modified to work even
if they implemented as built-in shell commands (unlikely
on real systems, but more reliable).
1) This commit implements reading all sections from configuration
files while looking for the current value of any server variable,
which were previously only read from the [mysqld.suffix] group and
from [mysqld], but not from other groups such as [mariadb.suffix],
[mariadb] or, for example, [server].
2) This commit also fixes misrecognition of some parameters when
parsing a command line containing a special marker for the end
of the list of options ("--") or when short option names (such
as "-s", "-a" and "-h arg") chained together (like a "-sah arg").
Such parameters can be passed to the SST script in the list of
arguments after "--mysqld-args" if the server is started with a
complex set of options - this was revealed during manual testing
of changes to read configuration files.
3) The server-side preparation code for the "--mysqld-args"
option list has also been simplified to make it easier to change
in the future (if needed), and has been improved to properly
handle the special backquote ("`") character in the argument
values.
This commit contains a large set of further bug fixes and
improvements to SST scripts for Galera, continuing the work
that was started in MDEV-24962 to make SST scripts work smoothly
in different network configurations (especially using ipv6) and
with different environment settings:
1) The ipv6 addresses were incorrectly handled in the SST script
for rsync (incorrect address substitution for establishing a
connection, incorrect address substitution for bind, and so on);
2) Checking the locality of the ip-address in SST scripts did not
support ipv6 addresses (such as "[::1]"), which were falsely
identified as non-local ip, which further did not allow running
two SSTs on different local addresses on the same machine.
On the other hand, this bug masked some other errors (related
to handling ipv6 addresses);
3) The code for checking the locality of the ip address was different
in the SST scripts for rsync and for mysqldump, with individual
flaws. This code is now made common and moved to wsrep_sst_common;
4) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
did not process ipv6 addresses correctly in all cases (not for all
branches);
5) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) in the wait_for_listen() and check_pid_and_port() functions
for some code branches could give a false positive result due to
the textual match of prefixes in the port number and/or PID of
the process;
6) Waiting for the start of the transport channel (socat, nc, rsync,
stunnel) was supported through different utilities in SST scripts
for mariabackup and for rsync, and with various minor flaws in
the code. Now the code is still different in these scripts, but
it supports a common set of utilities (lsof, ss, sockstat) and
is synchronized across patterns that used to check the output
of these utilities;
7) In SST via mariabackup, the signal about readiness to receive data
is sometimes sent too early - immediately after listen(), and not
after accept() (which are called by socat or netcat utility).
8) Checking availability of the some options of some utilities was
done using the grep pattern, which easily gives false positives;
9) Common name (CN) for local addresses, if not explicitly specified,
is now always replaced to "localhost" to avoid the need to generate
many separate certificates for local addresses of one machine and
not to depend on which the local address is currently used in test
(ipv4 or ipv6, etc.);
10) In tests galera_sst_mariabackup_encrypt_with_key_server and
galera_sst_rsync_encrypt_with_key_server the correct certificate
is selected to avoid commonname (CN) mismatch problems;
11) Further refactoring to protect against spaces in file names.
12) Further general refactoring to eliminate bash-specific constructs
or to improve code readability;
13) The code for setting options for the nc (netcat) utility was
different in different scripts for SST - now it is made identical.
14) Fixed long-time broken encryption via xbcrypt in combination with
mariabackup and added support for key-based encryption via openssl
utility, which is now enabled by default for encrypt=1 mode (this
default mode can be changed using a new configuration file option
"encypt-format=openssl|xbcrypt", which can be placed in the [mysqld],
[sst] or in the [xtrabackup] section) - this change will allow us
to use and to test the encypt=1 encryption without installing
non-standard third-party utilities.
After switching to the new mariabackup interface (instead of
the outdated innobackupex interface, which is supported for
compatibility), we need to explicitly pass a path to the datadir
directory as a parameter, since in the new interface the value
of this option is not automatically set in such a way that it
always matches the SST/IST logic. This commit adds passing this
option as an explicit parameter to mariabackup. This commit also
removed unnecessary options that are not used and not supported
by mariabackup.
Also, numerous flaws in the common wsrep_sst_common script have
been fixed:
1) There are many bash-specific constructs in the script that
may not be supported by other interpreters, which can lead
to the most unexpected errors during SST, because failures
in the interpretation of bash-specific constructs lead to
incorrect parsing of arguments;
2) There is parse_cnf() function which is often called by other
scripts for the "mysqld" or "--mysqld" group, but it does not
take into account the default group suffix, which leads to
reading values only from the default group, which then leads
to errors due to reading the default values instead of the
values for a specific group;
3) Some options such as --user, --innodb-data-home-dir or --datadir
are not removed from the --mysqld-args list, although they are
processed inside scripts (and passing of these options funther
may cause problems for mariabackup);
4) If an argument that the script understands is present in
the --mysqld-args list twice, then this causes SST to fail,
instead of reading the most recent value;
5) The "--host" parameter is technically still supported among
the arguments of the SST scripts, but in reality scripts do not
work with it as expected, especially if it has an IPv6 address;
6) If the port number is absent in the --address parameter value,
but the port number is explicitly passed through the --port
argument, then the scripts for mariabackup and xtrabackup-v2
fail;
7) If a new address interface is used (with the --address parameter),
then automatic default port substitution is not performed, although
it is supported for the legacy --host/--port interface.
8) If there are spaces in the parameter values after --mysqld_args,
then their further transfer does not occur correctly, which
causes mariabackup to fail during SST - the space splits
the argument in such a way that it breaks the parsing of the
following parameters;
9) If most of the parameters that are names or paths to the files
or directories contain spaces, then SST scripts fail in an
unpredictable way due to incorrect variable substitutions;
10) If the --log-bin option is passed among the arguments of myqlds
(--mysqld-args) without a parameter, and the --binlog option
is not specified, then the script cannot substitute the default
name for binlog and cannot construct binlog name using the
--log-basename argument (which is against server specifications);
11) Tail slashes are not removed from the directory names, which,
upon further substitution, leads to the appearance of a double
slash in the file paths;
12) The explicit --binlog parameter (which is now always transmitted
from the server side) and the "hidden" --log-bin parameter in the
list of arguments after --mysqld-args are perceived as two different
parameters in different parts of the scripts, and if they are do not
match for some reason, this will lead to failures during SST;
Also, all new changes from the 10.6 branch have been migrated here,
including the latest pull requests for authentication (only the part
that concerns SST scripts).
It also fixes dozens of other bugs in all SST scripts.
Removed numerous extra blank lines and spaces that interfere with
reading and understanding program code, making it more difficult to
find errors in scripts. I also removed all extra trailing spaces at
the ends of lines, which lead to marking extra lines as changes
(in subsequent changes). The amount of indentation in some parts
of the code has also been normalized.
SST scripts for Galera should use the new mariabackup interface
instead of the innobackupex interface, which is currently only
supported for compatibility reasons.
This commit converts the SST script for mariabackup to use the
new interface. It does not need separate tests, as any problems
will be seen as failures when running multiple tests for the
mariabackup-based SST.
To fix this, it is necessary to add an option to exclude the
database with the name "lost+found" from processing (the database
name will be checked by the check_if_skip_database_by_path() or
by the check_if_skip_database() function, and as a result
"lost+found" will be skipped).
In addition, it is necessary to slightly modify the verification
logic in the check_if_skip_database() function.
Also added a new test galera_sst_mariabackup_lost_found.test
This patch fixes several flaws in the SST scripts that cause
failures while running tests that use version 6 IP addresses
for cluster nodes.
First, if the netcat utility is used for streaming (but not socat),
then in accordance with its command line syntax, we need to remove
the square brackets around the IPv6 address. However, for socat,
the address must contain square brackets, as before.
Secondly, if an IPv6 address is used, then from the joiner side for
a number of systems (such as Debian) we need to explicitly specify
the "-6" option, otherwise a listening socket with an IPv6 address
may not be created.
This patch also contains code improvements in the wsrep_sst_common.
Changed the code that pars the connection address - fixed the
shortcomings that sometimes led to incorrect parsing of parameters
when using shells other than the latest versions of bash.
Also, this patch removes the duplicate code that is intended
for parsing the connection address and which was located in the
wsrep_sst_mariabackup file, since all the necessary actions have
already been done in wsrep_sst_common and there they are done in
such a way that any shell is supported, not just bash.
The fix does not require separate tests, since all the
necessary tests are already present in the galera_3nodes suite.
On the contrary, after this fix, tests using IPv6 addresses can
be removed from the disabled list (this will be done in a separate
commit related to MDEV-23659).
The problem is caused by the fact that adding the
--defaults-group-suffix option to fix MDEV-18863 causes
mysqld to read all options from the appropriate sections
of the config file, including options specific to mysqld_multi.
Reading unknown options (which are not supported by mysqld)
causes mysqld to terminate with an error.
However, the MDEV-18863 problem has been completely fixed
by passing options on the command line, and now there is no
need to specify the --defaults-group-suffix option (we just
need to give priority to options passed through the command
line, so as not to break MDEV-18863).
The problem is caused by the operation of netcat streamer and does
not appear on systems where socat is installed. We need to add the
"-N" option for netcat to call shutdown() on the socket when receiving
EOF from STDIN.
Setting "streamfmt=mbstream" in the "[sst]" section causes SST to fail
because the format automatically switches to 'tar' by default (insead
of mbstream).
To fix this, we need to add mbstream to the list of valid values for
the format, making it synonymous with xbstream. This must be done both
in the SST script and when parsing the options of the corresponding
utilities.
