This is the non-ndb part of the patch.
The return value of mysql_bin_log.write was ignored by most callers,
which may lead to inconsistent on master and slave if the transaction
was committed while the binlog was not correctly written. If
my_error() is call in mysql_bin_log.write, this could also lead to
assertion issue if my_ok() or my_error() is called after.
This fixed the problem by let the caller to check and handle the
return value of mysql_bin_log.write. This patch only adresses the
simple cases.
mysql-test/include/binlog_inject_error.inc:
inject binlog write error when doing a query
mysql-test/suite/binlog/t/binlog_write_error.test:
Simple test case to check if proper error is reported when injecting binlog write errors.
sql/events.cc:
check return value of mysql_bin_log.write
sql/log.cc:
check return value of mysql_bin_log.write
sql/log_event.cc:
check return value of mysql_bin_log.write
sql/log_event_old.cc:
check return value of mysql_bin_log.write
sql/mysql_priv.h:
Change write_bin_log to return int instead of void
sql/rpl_injector.cc:
check return value of writing binlog
sql/sp.cc:
check return value of writing binlog
sql/sp_head.cc:
return 1 if writing binlog failed
sql/sql_acl.cc:
check return value of writing binlog
sql/sql_base.cc:
check return value of writing binlog
sql/sql_class.h:
Change binlog_show_create_table to return int
sql/sql_db.cc:
Change write_to_binlog to return int
check return value of writing binlog
sql/sql_delete.cc:
check return value of writing binlog
sql/sql_insert.cc:
check return value of writing binlog
sql/sql_load.cc:
check return value of writing binlog
sql/sql_parse.cc:
check return value of writing binlog
sql/sql_partition.cc:
check return value of writing binlog
sql/sql_rename.cc:
check return value of writing binlog
sql/sql_repl.cc:
check return value of writing binlog
sql/sql_table.cc:
Change write_bin_log to return int, and return 1 if there was error writing binlog
sql/sql_tablespace.cc:
check return value of writing binlog
sql/sql_trigger.cc:
check return value of writing binlog
sql/sql_udf.cc:
check return value of writing binlog
sql/sql_update.cc:
check return value of writing binlog
sql/sql_view.cc:
check return value of writing binlog
Not all my_hash_insert() calls are checked for return value.
This patch adds appropriate checks and failure responses
where needed.
mysys/hash.c:
* Debug hook for testing failures in my_hash_insert()
port from mysql-next (5.4) to mysql-next-mr-bugfixing (5.5/5.6?)
2755 Konstantin Osipov 2008-11-27
Bug#32115 will remove the pre-requisite to initialize LEX to open tables.
This dependency was added in 5.1 and was supposed to be removed in 6.0.
Remove asserts and initialization of LEX in places where we don't deal
with partitioned tables.
sql/sp_head.cc:
Fix a typo.
One statement that have more than one different tables to update with
autoinc columns just was marked as unsafe in mixed mode, so the unsafe
warning can't be produced in statement mode.
To fix the problem, mark the statement as unsafe in statement mode too.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
The test case is updated due to the patch of bug#45827.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
The test result is updated due to the patch of bug#45827.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Test result for bug#45827.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test to verify if stmt that have more than one
different tables to update with autoinc columns will
produce unsafe warning
mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result:
The test result is updated due to the patch of bug#45827.
mysql-test/suite/rpl/t/rpl_trigger.test:
The test case is updated due to the patch of bug#45827.
mysql-test/suite/rpl/t/rpl_variables_stm.test:
The test case is updated due to the patch of bug#45827.
sql/sql_base.cc:
Reomved the 'set_current_stmt_binlog_row_based_if_mixed' function
for producing unsafe warnings by executing 'decide_logging_format'
function later in statement mode
Non-transactional updates that take place inside a transaction present problems
for logging because they are visible to other clients before the transaction
is committed, and they are not rolled back even if the transaction is rolled
back. It is not always possible to log correctly in statement format when both
transactional and non-transactional tables are used in the same transaction.
In the current patch, we ensure that such scenario is completely safe under the
ROW and MIXED modes.
When a sessione is closed, all temporary tables of the session are automatically
dropped and are binlogged. But it will be binlogged with wrong database names when
the length of the temporary tables' database names are greater than the
length of the current database name or the current database is not set.
Query_log_event's db_len is forgot to set when Query_log_event's db is set.
This patch wrote code to set db_len immediately after db has set.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
include/mysql.h:
Add a new flag to MYSQL_METHODS::flush_use_result
function pointer. This flag determines if all results
should be flushed or only the first one:
- if flush_all_results is TRUE, then cli_flush_use_result()
will read/flush all pending results. I.e. it will read
all packets while server status attribute indicates that
there are more results. This is a new semantic, required
to fix the bug.
- if flush_all_results is FALSE, the old sematic
is preserved -- i.e. cli_flush_use_result() reads data
until first EOF-packet.
include/mysql.h.pp:
Update the ABI with new calls (compatible changes).
include/mysql_com.h:
Add CLIENT_PS_OUT_PARAMS -- a client capability indicating that the client supportsю
libmysql/libmysql.c:
Add mysql_stmt_next_result() -- analogue of mysql_next_result() for binary protocol.
Fix a minor bug in alloc_fields() -- not all members were copied over,
and some only shallow-copied (catalog).
Flush all results in mysql_stmt_close() (Bug#39519).
libmysqld/lib_sql.cc:
Rename send_fields() -> send_result_set_metadata().
Refactoring: change prepare_for_send() so that it accepts only
what it really needs -- a number of elements in the list.
mysql-test/r/ps.result:
Update results: WL#4435.
mysql-test/t/ps.test:
WL#4435: A test case for an SQL-part of the problem.
sql-common/client.c:
Bug#39519.
Implement new functionality in cli_flush_use_result():
if flush_all_delete is TRUE, then it should read/flush
all pending results.
sql/Makefile.am:
Add a new header sql_prepare.h to the list
of build headers.
sql/events.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/mysql_priv.h:
Move sql_prepare.cc-specific declarations to a new
header - sql_prepare.h.
sql/procedure.h:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/protocol.cc:
Move the logic responsible for sending of one result
set row to the Protocol class. Define a template
for end-of-statement action.
Refactoring: change prepare_for_send() so that it accepts
only what it really needs -- a number of elements in the list.
Rename send_fields() to send_result_set_metadata().
sql/protocol.h:
Update with new declarations (WL#4435).
Rename send_fields() -> send_result_set_metadata().
prepare_for_send() only needs the number of columns to send,
and doesn't use the item list - update signature to require
only what's needed.
Add a new protocol type -- Protocol_local.
sql/repl_failsafe.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/slave.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_acl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_base.cc:
Include sql_prepare.h (for Reprepare_observer).
sql/sql_cache.cc:
Extend the query cache flags block to be able
to store a numeric id for the result format,
not just a flag binary/non-binary.
sql/sql_class.cc:
Update to use the rename of Protocol::send_fields()
to Protocol::send_result_set_metadata().
Use Protocol::send_one_result_set_row().
sql/sql_class.h:
Move the declaration of Reprepare_observer to the
new header - sql_prepare.h.
Update to the new signature of class Protocol::send_fields().
sql/sql_connect.cc:
Use a protocol template method instead of
raw NET layer API at the end of a statement.
sql/sql_cursor.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_error.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_handler.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
Use new method Protocol::send_one_result_set_row().
sql/sql_help.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_lex.cc:
Initialize multi_statements variable.
Add a handy constant for empty lex
string.
sql/sql_lex.h:
Add a separate member for a standalone
parsing option - multi-statements support.
sql/sql_list.cc:
sql_list.h is a standalone header now,
no need to include mysql_priv.h.
sql/sql_list.h:
Make sql_list.h a stand-alone header.
sql/sql_parse.cc:
Include sql_prepare.h for prepared
statements- related declarations.
Use a new Protocol template method to end
each statement (send OK, EOF or ERROR to
the client).
sql/sql_prepare.cc:
Implement Execute Direct API (WL#4264),
currently unused. It will be used by the service
interface (Backup).
Use a new header - sql_prepare.h.
Add support for OUT parameters in the
binary and text protocol (prepared statements
only).
sql/sql_prepare.h:
Add a new header to contain (for now)
all prepared statement- external
related declarations.
sql/sql_profile.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_repl.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_select.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_show.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_string.h:
Add a way to convert a String to LEX_STRING.
sql/sql_table.cc:
Rename: Protocol::send_fields() ->
Protocol::send_result_set_metadata().
sql/sql_update.cc:
Remove an extraneous my_error(). The error
is already reported in update_non_unique_table_error().
sql/sql_yacc.yy:
Support for multi-statements is an independent
property of parsing, not derived from
the protocol type.
tests/mysql_client_test.c:
Add tests for WL#4435 (binary protocol).
The flag EXTRA_ACL is used in conjugation with our access checks, yet it is
not clear what impact this flag has.
This is a code clean up which replaces use of EXTRA_ACL with an explicit
function parameter.
The patch also fixes privilege checks for:
- SHOW CREATE TABLE: The new privilege requirement is any privilege on
the table-level.
- CHECKSUM TABLE: Requires SELECT on the table level.
- SHOW CREATE VIEW: Requires SHOW_VIEW and SELECT on the table level
(just as the manual claims)
- SHOW INDEX: Requires any privilege on any column combination.
mysql-test/r/grant.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant2.result:
* Error message now shows correct command (SHOW instead of SELECT)
mysql-test/r/grant4.result:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/r/information_schema_db.result:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/r/outfile.result:
* Changed error code
mysql-test/r/view_grant.result:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
mysql-test/t/grant4.test:
* This test file tests privilege requirements for
SHOW COLUMNS
CREATE TABLE .. LIKE
SHOW CREATE TABLE
SHOW INDEX
CHECKSUM TABLE
SHOW CREATE VIEW
mysql-test/t/information_schema_db.test:
* Added SELECT privilege to testdb_2 as
SHOW CREATE VIEW now demands this privilege
as well as SHOW VIEW.
mysql-test/t/outfile.test:
* Changed error code
mysql-test/t/view_grant.test:
* Additional SELECT privilege is now needed
for SHOW CREATE VIEW
sql/mysql_priv.h:
* Replaced EXTRA_ACL with a parameter
sql/sp_head.cc:
* Replaced EXTRA_ACL with a parameter
sql/sql_acl.cc:
* Converted function documentation to doxygen and clarified some behaviors.
* Changed value from uint to bool to better reflect its meaning.
* Removed pointless variable orig_want_access
* Added function has_any_table_level_privileges to help with requirements
checks during SHOW CREATE TABLE.
sql/sql_acl.h:
* changed signature of check_grant()
* introduced access control function has_any_table_leevl_privileges()
sql/sql_base.cc:
* Check_table_access has new signature
sql/sql_cache.cc:
* Check_table_access has new signature
sql/sql_parse.cc:
* Rewrote function documentation in doxygen comments for: check_access,
check_table_acces, check_grant.
* Removed EXTRA_ACL flag where it doesn't hold any meaningful purpose anymore
and replaced it with a function parameter where any privileges on any column
combination would satisfy the requirement.
* Fixed privilege check for SHOW COLUMNS and SHOW INDEX
* Modified check_table_access to gain clarity in what EXTRA_ACL actually does.
* Modified check_access to gain clarity in what EXTRA_ACL actually does.
* Fixed privilege check for CREATE TABLE .. LIKE .. ; It now requires SELECT
privileges on the table.
* Fixed privilege check for SHOW CREATE TABLE ..; It now requires any privilege
on the table level.
sql/sql_plugin.cc:
* check_table_access has new signature
sql/sql_prepare.cc:
* check_table_access has new signature
sql/sql_show.cc:
* check_table_access has new signature
sql/sql_trigger.cc:
* check_table_access has new signature
sql/sql_update.cc:
* check grant has new signature
sql/sql_view.cc:
* check_table_access has new signature
----------------------------------------------------------
revno: 2630.22.8
committer: Konstantin Osipov <konstantin@mysql.com>
branch nick: mysql-6.0-runtime
timestamp: Sun 2008-08-10 18:49:52 +0400
message:
Get rid of typedef struct for the most commonly used types:
TABLE, TABLE_SHARE, LEX. This simplifies use of tags
and forward declarations.
buffering is used
FORCE INDEX FOR ORDER BY now prevents the optimizer from
using join buffering. As a result the optimizer can use
indexed access on the first table and doesn't need to
sort the complete resultset at the end of the statement.
The problem is that there is only one autoinc value associated with
the query when binlogging. If more than one autoinc values are used
in the query, the autoinc values after the first one can be inserted
wrongly on slave. So these autoinc values can become inconsistent on
master and slave.
The problem is resolved by marking all the statements that invoke
a trigger or call a function that updated autoinc fields as unsafe,
and will switch to row-format in Mixed mode. Actually, the statement
is safe if just one autoinc value is used in sub-statement, but it's
impossible to check how many autoinc values are used in sub-statement.)
mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
Test result for bug#45677
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
Added test to verify the following two properties:
P1) insert/update in an autoinc column causes statement to
be logged in row format if binlog_format=mixed
P2) if binlog_format=mixed, and a trigger or function contains
two or more inserts/updates in a table that has an autoinc
column, then the slave should not go out of sync, even if
there are concurrent transactions.
sql/sql_base.cc:
Added function 'has_write_table_with_auto_increment' to check
if one (or more) write tables have auto_increment columns.
Removed function 'has_two_write_locked_tables_with_auto_increment',
because the function is included in function
'has_write_table_with_auto_increment'.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
.bzrignore:
WL#4259 - Debug Sync Facility
Added the symbolic link libmysqld/debug_sync.cc.
CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
configure.in:
WL#4259 - Debug Sync Facility
Added definition for ENABLED_DEBUG_SYNC.
include/my_sys.h:
WL#4259 - Debug Sync Facility
Added definition for the DEBUG_SYNC_C macro.
libmysqld/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
libmysqld/Makefile.am:
WL#4259 - Debug Sync Facility
Added sql/debug_sync.cc.
mysql-test/include/have_debug_sync.inc:
WL#4259 - Debug Sync Facility
New include file.
mysql-test/mysql-test-run.pl:
WL#4259 - Debug Sync Facility
Added option --debug_sync_timeout.
mysql-test/r/debug_sync.result:
WL#4259 - Debug Sync Facility
New test result.
mysql-test/r/have_debug_sync.require:
WL#4259 - Debug Sync Facility
New require file.
mysql-test/t/debug_sync.test:
WL#4259 - Debug Sync Facility
New test file.
mysys/my_static.c:
WL#4259 - Debug Sync Facility
Added definition for debug_sync_C_callback_ptr.
mysys/thr_lock.c:
WL#4259 - Debug Sync Facility
Added sync point "wait_for_lock".
sql/CMakeLists.txt:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/Makefile.am:
WL#4259 - Debug Sync Facility
Added debug_sync.cc and debug_sync.h.
sql/debug_sync.cc:
WL#4259 - Debug Sync Facility
New source file.
sql/debug_sync.h:
WL#4259 - Debug Sync Facility
New header file.
sql/mysqld.cc:
WL#4259 - Debug Sync Facility
Added opt_debug_sync_timeout.
Added calls to debug_sync_init() and debug_sync_end().
Fixed a purecov comment (unrelated).
sql/set_var.cc:
WL#4259 - Debug Sync Facility
Added server variable "debug_sync".
sql/set_var.h:
WL#4259 - Debug Sync Facility
Added declaration for server variable "debug_sync".
sql/share/errmsg.txt:
WL#4259 - Debug Sync Facility
Added error messages ER_DEBUG_SYNC_TIMEOUT and ER_DEBUG_SYNC_HIT_LIMIT.
sql/sql_base.cc:
WL#4259 - Debug Sync Facility
Added sync points "after_flush_unlock" and "before_lock_tables_takes_lock".
sql/sql_class.cc:
WL#4259 - Debug Sync Facility
Added initialization for debug_sync_control to THD::THD.
Added calls to debug_sync_init_thread() and debug_sync_end_thread().
sql/sql_class.h:
WL#4259 - Debug Sync Facility
Added element debug_sync_control to THD.
storage/myisam/myisamchk.c:
Fixed a typo in an error message string (unrelated).
binlog-db-db / binlog-ignore-db
InnoDB will return an error if statement based replication is used
along with transaction isolation level READ-COMMITTED (or weaker),
even if the statement in question is filtered out according to the
binlog-do-db rules set. In this case, an error should not be printed.
This patch addresses this issue by extending the existing check in
external_lock to take into account the filter rules before deciding to
print an error. Furthermore, it also changes decide_logging_format to
take into consideration whether the statement is filtered out from
binlog before decision is made.
sql/sql_base.cc:
Changed the check on decide_logging_format to take into account
whether statement is filtered or not in SBR.
sql/sql_class.cc:
Added the thd_binlog_filter_ok to INNODB_COMPATIBILITY_HOOKS set.
storage/innobase/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innobase/handler/ha_innodb.h:
Added declaration of new hook.
storage/innodb_plugin/handler/ha_innodb.cc:
Extended check in external_lock to take into consideration the
filtering when deciding to throw an error.
storage/innodb_plugin/handler/ha_innodb.h:
Added declaration of new hook.
with gcc 4.3.2
This patch fixes a number of GCC warnings about variables used
before initialized. A new macro UNINIT_VAR() is introduced for
use in the variable declaration, and LINT_INIT() usage will be
gradually deprecated. (A workaround is used for g++, pending a
patch for a g++ bug.)
GCC warnings for unused results (attribute warn_unused_result)
for a number of system calls (present at least in later
Ubuntus, where the usual void cast trick doesn't work) are
also fixed.
client/mysqlmanager-pwgen.c:
A fix for warn_unused_result, adding fallback to use of
srand()/rand() if /dev/random cannot be used. Also actually
adds calls to rand() in the second branch so that it actually
creates a random password.
When a connection is dropped any remaining temporary table is also automatically
dropped and the SQL statement of this operation is written to the binary log in
order to drop such tables on the slave and keep the slave in sync. Specifically,
the current code base creates the following type of statement:
DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `db`.`table`;
Unfortunately, appending the database to the table name in this manner circumvents
the replicate-rewrite-db option (and any options that check the current database).
To solve the issue, we started writing the statement to the binary as follows:
use `db`; DROP /*!40005 TEMPORARY */ TABLE IF EXISTS `table`;
Moved decide_logging_format to sql_class.cc
sql/sql_base.cc:
Moved decide_logging_format to sql_class.cc
The auxiliary macro FLAGSTR is not needed here any more.
sql/sql_class.cc:
- Moved decide_logging_format from sql_base.cc to here.
- To avoid copying the FLAGSTR macro, I changed some
DBUG_PRINT to just print flags in hex. No need to
pretty-print debug traces.
- Changed the type of 'flags' to handler::Table_flags
because that's the return type of handler::ha_table_flags.
This is a post-push fix addressing review requests and
problems with extra warnings.
Problem 1: The sub-statement where an unsafe warning was detected was
printed as part of the warning. This was ok for statements that
were unsafe due to, e.g., calls to UUID(), but did not make
sense for statements that were unsafe because there was more than
one autoincrement column (unsafeness in this case comes from the
combination of several sub-statements).
Fix 1: Instead of printing the sub-statement, print an explanation
of why the statement is unsafe.
Problem 2:
When a recursive construct (i.e., stored proceure, stored
function, trigger, view, prepared statement) contained several
sub-statements, and at least one of them was unsafe, there would be
one unsafeness warning per sub-statement - even for safe
sub-statements.
Fix 2:
Ensure that each type of warning is printed at most once, by
remembering throughout the execution of the statement which types
of warnings have been printed.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
- Clarified comment per review request.
- Added checks for the number of warnings in each invocation.
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Per review request, replaced @@session.binlog_format by
@@global.binlog_format, since INSERT DELAYED reads the global
variable. (In this test case, the two variables have the same
value, so the change is cosmetic.)
mysql-test/r/sp_trans.result:
updated result file
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_ps.result:
updated result file
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
updated result file
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file. Note that duplicate warnings are now gone.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Added tests for: (1) a statement that is unsafe in many ways;
(2) a statement that is unsafe in the same way several times.
- Use -- style to invoke mysqltest commands.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
updated result file
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
updated result file
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Per review request, added comment explaining what the test case
does (copied from rpl_stm_found_rows.test)
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Clarified grammar in comment.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
Updated result file.
sql/item_create.cc:
Made set_stmt_unsafe take one parameter, describing the
type of unsafeness.
sql/sp_head.cc:
Added unsafe_flags field and made it hold all the unsafe flags.
sql/sp_head.h:
- Removed the BINLOG_ROW_BASED_IF_MIXED flag from m_flags.
Instead, we use the new unsafe_flags field to hold the
unsafeness state of the sp.
- Made propagate_attributes() copy all unsafe flags.
sql/sql_base.cc:
- Made LEX::set_stmt_unsafe() take an extra argument.
- Made binlog_unsafe_warning_flags store the type of unsafeness.
- Per review requests, clarified comments
- Added DBUG printouts
sql/sql_class.cc:
- Made warnings be generated in issue_warnings() and call that from
binlog_query(). Wrote issue_warnings(), which prints zero or more
warnings, avoiding to print warnings more than once per statement.
- Per review request, added @todo so that we remember to assert
correct behavior in binlog_query.
sql/sql_class.h:
- Removed BINLOG_WARNING_PRINTED
- Use [set|clear]_current_stmt_binlog_row_based() instead of
modifying the flag directly.
- added issue_unsafe_warnings() (only called from binlog_unsafe)
- Per review request, improved some documentation.
sql/sql_insert.cc:
Added extra argument to LEX::set_stmt_unsafe()
sql/sql_lex.h:
- Added enum_binlog_stmt_unsafe, listing all types of unsafe
statements.
- Per review requests, improved many comments for member
functions.
- Added [get|set]_stmt_unsafe_flags(), which return/set all the
unsafe flags for a statement.
sql/sql_parse.cc:
- Renamed binlog_warning_flags to binlog_unsafe_warning_flags.
- Per review requests, improved comment.
sql/sql_view.cc:
Made views propagate all the new unsafe flags.
sql/sql_yacc.yy:
Added parameter to set_stmt_unsafe().
storage/innobase/handler/ha_innodb.cc:
Per review requests, replaced DBUG_EXECUTE_IF() by DBUG_EVALUATE_IF().
NOTE: This undoes changes by BUG#42829 in sql_class.cc:binlog_query().
I will revert the change in a post-push fix (the binlog filter should
be checked in sql_base.cc:decide_logging_format()).
General overview:
The logic for switching to row format when binlog_format=MIXED had
numerous flaws. The underlying problem was the lack of a consistent
architecture.
General purpose of this changeset:
This changeset introduces an architecture for switching to row format
when binlog_format=MIXED. It enforces the architecture where it has
to. It leaves some bugs to be fixed later. It adds extensive tests to
verify that unsafe statements work as expected and that appropriate
errors are produced by problems with the selection of binlog format.
It was not practical to split this into smaller pieces of work.
Problem 1:
To determine the logging mode, the code has to take several parameters
into account (namely: (1) the value of binlog_format; (2) the
capabilities of the engines; (3) the type of the current statement:
normal, unsafe, or row injection). These parameters may conflict in
several ways, namely:
- binlog_format=STATEMENT for a row injection
- binlog_format=STATEMENT for an unsafe statement
- binlog_format=STATEMENT for an engine only supporting row logging
- binlog_format=ROW for an engine only supporting statement logging
- statement is unsafe and engine does not support row logging
- row injection in a table that does not support statement logging
- statement modifies one table that does not support row logging and
one that does not support statement logging
Several of these conflicts were not detected, or were detected with
an inappropriate error message. The problem of BUG#39934 was that no
appropriate error message was written for the case when an engine
only supporting row logging executed a row injection with
binlog_format=ROW. However, all above cases must be handled.
Fix 1:
Introduce new error codes (sql/share/errmsg.txt). Ensure that all
conditions are detected and handled in decide_logging_format()
Problem 2:
The binlog format shall be determined once per statement, in
decide_logging_format(). It shall not be changed before or after that.
Before decide_logging_format() is called, all information necessary to
determine the logging format must be available. This principle ensures
that all unsafe statements are handled in a consistent way.
However, this principle is not followed:
thd->set_current_stmt_binlog_row_based_if_mixed() is called in several
places, including from code executing UPDATE..LIMIT,
INSERT..SELECT..LIMIT, DELETE..LIMIT, INSERT DELAYED, and
SET @@binlog_format. After Problem 1 was fixed, that caused
inconsistencies where these unsafe statements would not print the
appropriate warnings or errors for some of the conflicts.
Fix 2:
Remove calls to THD::set_current_stmt_binlog_row_based_if_mixed() from
code executed after decide_logging_format(). Compensate by calling the
set_current_stmt_unsafe() at parse time. This way, all unsafe statements
are detected by decide_logging_format().
Problem 3:
INSERT DELAYED is not unsafe: it is logged in statement format even if
binlog_format=MIXED, and no warning is printed even if
binlog_format=STATEMENT. This is BUG#45825.
Fix 3:
Made INSERT DELAYED set itself to unsafe at parse time. This allows
decide_logging_format() to detect that a warning should be printed or
the binlog_format changed.
Problem 4:
LIMIT clause were not marked as unsafe when executed inside stored
functions/triggers/views/prepared statements. This is
BUG#45785.
Fix 4:
Make statements containing the LIMIT clause marked as unsafe at
parse time, instead of at execution time. This allows propagating
unsafe-ness to the view.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Added auxiliary file used by binlog_unsafe.test to create and
execute recursive constructs
(functions/procedures/triggers/views/prepared statements).
mysql-test/extra/rpl_tests/rpl_foreign_key.test:
removed unnecessary set @@session.binlog_format
mysql-test/extra/rpl_tests/rpl_insert_delayed.test:
Filter out table id from table map events in binlog listing.
Got rid of $binlog_format_statement.
mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test:
disable warnings around call to unsafe procedure
mysql-test/include/rpl_udf.inc:
Disabled warnings for code that generates warnings
for some binlog formats. That would otherwise cause
inconsistencies in the result file.
mysql-test/r/mysqldump.result:
Views are now unsafe if they contain a LIMIT clause.
That fixed BUG#45831. Due to BUG#45832, a warning is
printed for the CREATE VIEW statement.
mysql-test/r/sp_trans.result:
Unsafe statements in stored procedures did not give a warning if
binlog_format=statement. This is BUG#45824. Now they do, so this
result file gets a new warning.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Error message changed.
mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result:
INSERT DELAYED didn't generate a warning when binlog_format=STATEMENT.
That was BUG#45825. Now there is a warning, so result file needs to be
updated.
mysql-test/suite/binlog/r/binlog_stm_ps.result:
Changed error message.
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file:
- error message changed
- added test for most combinations of unsafe constructs invoked
from recursive constructs
- INSERT DELAYED now gives a warning (because BUG#45826 is fixed)
- INSERT..SELECT..LIMIT now gives a warning from inside recursive
constructs (because BUG#45785 was fixed)
- When a recursive construct (e.g., stored proc or function)
contains more than one statement, at least one of which is
unsafe, then all statements in the recursive construct give
warnings. This is a new bug introduced by this changeset.
It will be addressed in a post-push fix.
mysql-test/suite/binlog/t/binlog_innodb.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
mysql-test/suite/binlog/t/binlog_multi_engine.test:
The error code has changed for statements where more than one
engine is involved and one of them is self-logging.
mysql-test/suite/binlog/t/binlog_unsafe-master.opt:
Since binlog_unsafe now tests unsafe-ness of UDF's, we need an extra
flag in the .opt file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
- Clarified comment.
- Rewrote first part of test. Now it tests not only unsafe variables
and functions, but also unsafe-ness due to INSERT..SELECT..LIMIT,
INSERT DELAYED, insert into two autoinc columns, use of UDF's, and
access to log tables in the mysql database.
Also, in addition to functions, procedures, triggers, and prepared
statements, it now also tests views; and it constructs recursive
calls in two levels by combining these recursive constructs.
Part of the logic is in extra/rpl_tests/create_recursive_construct.inc.
- added tests for all special system variables that should not be unsafe.
- added specific tests for BUG#45785 and BUG#45825
mysql-test/suite/rpl/r/rpl_events.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_extraColmaster_myisam.result:
updated result file
mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result:
updated result file
mysql-test/suite/rpl/r/rpl_idempotency.result:
updated result file
mysql-test/suite/rpl/r/rpl_mix_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file equals
the second half of the old rpl_found_rows.result, with the following
modifications:
- minor formatting changes
- additional initialization
mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_idempotency.result:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to rpl_row_idempotency.test. This is
the new result file.
mysql-test/suite/rpl/r/rpl_row_insert_delayed.result:
Got rid of unnecessary explicit setting of binlog format.
mysql-test/suite/rpl/r/rpl_stm_found_rows.result:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- warning is now issued for unsafe statements inside procedures
(since BUG#45824 is fixed)
- second half of file is moved to rpl_mix_found_rows.result
mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/r/rpl_stm_loadfile.result:
error message changed
mysql-test/suite/rpl/r/rpl_temporary_errors.result:
updated result file
mysql-test/suite/rpl/r/rpl_udf.result:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl/t/rpl_bug31076.test:
Test is only valid in mixed or row mode since it generates row events.
mysql-test/suite/rpl/t/rpl_events.test:
Removed explicit set of binlog_format and removed duplicate testing.
Instead, we rely on the test system to try all binlog formats.
mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test:
Removed triplicate testing and instead relying on test system.
Test is only relevant for row format since statement-based replication
cannot handle extra columns on master.
mysql-test/suite/rpl/t/rpl_idempotency-slave.opt:
Removed .opt file to avoid server restarts.
mysql-test/suite/rpl/t/rpl_idempotency.test:
- Moved out row-only tests to a new test file, rpl_row_idempotency.test.
rpl_idempotency now only contains tests that execute in all
binlog_formats.
- While I was here, also removed .opt file to avoid server restarts.
The slave_exec_mode is now set inside the test instead.
mysql-test/suite/rpl/t/rpl_mix_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). This file
contains the second half of the original rpl_found_rows.test with the
follwing changes:
- initialization
- removed SET_BINLOG_FORMAT and added have_binlog_format_mixed.inc
- minor formatting changes
mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test:
Test cannot execute in statement mode, since we no longer
switch to row format when binlog_format=statement.
Enforced mixed mode throughout the test.
mysql-test/suite/rpl/t/rpl_row_idempotency.test:
Moved the second half of rpl_idempotency.test, which only
executed in row mode, to this new file. We now rely on the
test system to set binlog format.
mysql-test/suite/rpl/t/rpl_row_insert_delayed.test:
- Got rid of unnecessary explicit setting of binlog format.
- extra/rpl_tests/rpl_insert_delayed.test does not need the
$binlog_format_statement variable any more, so that was
removed.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode.
mysql-test/suite/rpl/t/rpl_stm_found_rows.test:
Split rpl_found_rows.test into rpl_mix_found_rows.test (a new file) and
rpl_stm_found_rows.test (renamed rpl_found_rows.test). Changes in
this file:
- minor formatting changes
- added have_binlog_format_statement and removed SET BINLOG_FORMAT.
- second half of file is moved to rpl_mix_found_rows.test
- added cleanup code
mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test:
Moved out code operating in mixed mode from rpl_stm_insert_delayed
(into rpl_mix_insert_delayed) and got rid of explicit setting of
binlog format.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
The test switches binlog_format internally and master generates both
row and statement events. Hence, the slave must be able to log in both
statement and row format. Hence test was changed to only execute in
mixed mode on slave.
mysql-test/suite/rpl/t/rpl_temporary_errors.test:
Removed explicit set of binlog format. Instead, the test now only
executes in row mode.
mysql-test/suite/rpl/t/rpl_udf.test:
Remove explicit set of binlog format (and triplicate test execution)
and rely on test system executing the test in all binlog formats.
mysql-test/suite/rpl_ndb/combinations:
Added combinations file for rpl_ndb.
mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result:
new result file
mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result:
updated result file
mysql-test/suite/rpl_ndb/t/rpl_ndb_2innodb.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_2myisam.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_basic.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt:
new option file
mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test:
New test case to verify all errors and warnings generated by
decide_logging_format.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_blob2.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_circular_simplex.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
While I was here, also made the test clean up after itself.
mysql-test/suite/rpl_ndb/t/rpl_ndb_commit_afterflush.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_ctype_ucs2_def.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_delete_nowhere.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_db.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_do_table.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_func003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_innodb_trans.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_insert_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_mixed_engines_transactions.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_multi_update3.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_rep_ignore.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_row_001.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp003.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_sp006.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/suite/rpl_ndb/t/rpl_ndb_trig004.test:
The test needs slave to be able to switch to row mode, so the
test was changed to only execute in mixed and row mode.
mysql-test/t/partition_innodb_stmt.test:
Changed error code for innodb updates with READ COMMITTED or
READ UNCOMMITTED transaction isolation level and
binlog_format=statement.
sql/event_db_repository.cc:
Use member function to read current_stmt_binlog_row_based.
sql/events.cc:
Use member function to read current_stmt_binlog_row_based.
sql/ha_ndbcluster_binlog.cc:
reset_current_stmt_binlog_row_based() is not a no-op for the ndb_binlog
thread any more. Instead, the ndb_binlog thread now forces row mode both
initially and just after calling mysql_parse. (mysql_parse() is the only
place where reset_current_stmt_binlog_row_based() may be called from
the ndb_binlog thread, so these are the only two places that need to
change.)
sql/ha_partition.cc:
Use member function to read current_stmt_binlog_row_based.
sql/handler.cc:
Use member function to read current_stmt_binlog_row_based.
sql/item_create.cc:
Added DBUG_ENTER to some functions, to be able to trace when
set_stmt_unsafe is called.
sql/log.cc:
Use member function to read current_stmt_binlog_row_based.
sql/log_event.cc:
- Moved logic for changing to row format out of do_apply_event (and into
decide_logging_format).
- Added @todo comment for post-push cleanup.
sql/log_event_old.cc:
Move logic for changing to row format out of do_apply_event (and into
decide_logging_format).
sql/mysql_priv.h:
Make decide_logging_format() a member of the THD class, for two reasons:
- It is natural from an object-oriented perspective.
- decide_logging_format() needs to access private members of THD
(specifically, the new binlog_warning_flags field).
sql/rpl_injector.cc:
Removed call to set_current_stmt_binlog_row_based().
From now on, only decide_logging_fromat is allowed to modify
current_stmt_binlog_row_based. This call is from the ndb_binlog
thread, mostly executing code in ha_ndbcluster_binlog.cc.
This call can be safely removed, because:
- current_stmt_binlog_row_based is initialized for the ndb_binlog
thread's THD object when the THD object is created. So we're
not going to read uninitialized memory.
- The behavior of ndb_binlog thread does not use the state of the
current_stmt_binlog_row_based. It is conceivable that the
ndb_binlog thread would rely on the current_stmt_binlog_format
in two situations:
(1) when it calls mysql_parse;
(2) when it calls THD::binlog_query.
In case (1), it always clears THD::options&OPTION_BIN_LOG (because
run_query() in ha_ndbcluster_binlog.cc is only called with
disable_binlogging = TRUE).
In case (2), it always uses qtype=STMT_QUERY_TYPE.
sql/set_var.cc:
Added @todo comment for post-push cleanup.
sql/share/errmsg.txt:
Added new error messages and clarified ER_BINLOG_UNSAFE_STATEMENT.
sql/sp.cc:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sp_head.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sp_head.h:
Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_acl.cc:
Got rid of MYSQL_QUERY_TYPE: it was equivalent to STMT_QUERY_TYPE.
sql/sql_base.cc:
- Made decide_logging_format take care of all logic for deciding the
logging format, and for determining the related warnings and errors.
See comment above decide_logging_format for details.
- Made decide_logging_format a member function of THD, since it needs
to access private members of THD and since its purpose is to update
the state of a THD object.
- Added DBUG_ENTER, to be able to trace when set_stmt_unsafe is called.
sql/sql_class.cc:
- Moved logic for determining unsafe warnings away from THD::binlog_query
(and into decide_logging_format()). Now, it works like this:
1. decide_logging_format detects that the current statement shall
produce a warning, if it ever makes it to the binlog
2. decide_logging_format sets a flag of THD::binlog_warning_flags.
3. THD::binlog_query reads the flag. If the flag is set, it generates
a warning.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_class.h:
- Added THD::binlog_warning_flags (see sql_class.cc for explanation).
- Made decide_logging_format() and reset_for_next_command() member
functions of THD (instead of standalone functions). This was needed
for two reasons: (1) the functions need to access the private member
THD::binlog_warning_flags; (2) the purpose of these functions is to
update the staet of a THD object, so from an object-oriented point
of view they should be member functions.
- Encapsulated current_stmt_binlog_row_based, so it is now private and
can only be accessed from a member function. Also changed the
data type to an enumeration instead of a bool.
- Removed MYSQL_QUERY_TYPE, because it was equivalent to
STMT_QUERY_TYPE anyways.
- When reset_current_stmt_binlog_row_based was called from the
ndb_binlog thread, it would behave as a no-op. This special
case has been removed, and the behavior of
reset_current_stmt_binlog_row_based does not depend on which thread
calls it any more. The special case did not serve any purpose,
since the ndb binlog thread did not take the
current_stmt_binlog_row_based flag into account anyways.
sql/sql_delete.cc:
- Moved logic for setting row format for DELETE..LIMIT away from
mysql_prepare_delete.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_insert.cc:
- Removed unnecessary calls to thd->lex->set_stmt_unsafe() and
thd->set_current_stmt_binlog_row_based_if_mixed() from
handle_delayed_insert(). The calls are unnecessary because they
have already been made; they were made in the constructor of
the `di' object.
- Since decide_logging_format() is now a member function of THD, code
that calls decide_logging_format() had to be updated.
- Added DBUG_ENTER call, to be able to trace when set_stmt_unsafe is
called.
- Moved call to set_stmt_unsafe() for INSERT..SELECT..LIMIT away from
mysql_insert_select_prepare() (and into decide_logging_format).
This is part of the fix for BUG#45831.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_lex.h:
- Added the flag BINLOG_STMT_FLAG_ROW_INJECTION to enum_binlog_stmt_flag.
This was necessary so that a statement can identify itself as a row
injection.
- Added appropriate setter and getter functions for the new flag.
- Added or clarified some comments.
- Added DBUG_ENTER()
sql/sql_load.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_parse.cc:
- Made mysql_reset_thd_for_next_command() clear thd->binlog_warning_flags.
- Since thd->binlog_warning_flags is private, it must be set in a
member function of THD. Hence, moved the body of
mysql_reset_thd_for_next_command() to the new member function
THD::reset_thd_for_next_command(), and made
mysql_reset_thd_for_next_command() call
THD::reset_thd_for_next_command().
- Removed confusing comment.
- Use member function to read current_stmt_binlog_row_based.
sql/sql_repl.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_table.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_udf.cc:
Use member function to read current_stmt_binlog_row_based.
sql/sql_update.cc:
Moved logic for setting row format for UPDATE..LIMIT away from
mysql_prepare_update.
(Instead, we mark the statement as unsafe at parse time (sql_yacc.yy)
and rely on decide_logging_format() (sql_class.cc) to set row format.)
This is part of the fix for BUG#45831.
sql/sql_yacc.yy:
Made INSERT DELAYED, INSERT..SELECT..LIMIT, UPDATE..LIMIT, and
DELETE..LIMIT mark themselves as unsafe at parse time (instead
of at execution time).
This is part of the fixes BUG#45831 and BUG#45825.
storage/example/ha_example.cc:
Made exampledb accept inserts. This was needed by the new test case
rpl_ndb_binlog_format_errors, because it needs an engine that
is statement-only (and accepts inserts).
storage/example/ha_example.h:
Made exampledb a statement-only engine instead of a row-only engine.
No existing test relied exampledb's row-only capabilities. The new
test case rpl_ndb_binlog_format_errors needs an engine that is
statement-only.
storage/innobase/handler/ha_innodb.cc:
- Changed error error code and message given by innodb when
binlog_format=STATEMENT and transaction isolation level is
READ COMMITTED or READ UNCOMMITTED.
- While I was here, also simplified the condition for
checking when to give the error.
The TABLE::reginfo.impossible_range is used by the optimizer to indicate
that the condition applied to the table is impossible. It wasn't initialized
at table opening and this might lead to an empty result on complex queries:
a query might set the impossible_range flag on a table and when the query finishes,
all tables are returned back to the table cache. The next query that uses the table
with the impossible_range flag set and an index over the table will see the flag
and thus return an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
mysql-test/r/select.result:
A test case for the bug#45266: Uninitialized variable lead to an empty result.
mysql-test/t/select.test:
A test case for the bug#45266: Uninitialized variable lead to an empty result.
sql/sql_base.cc:
Bug#45266: Uninitialized variable lead to an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
sql/sql_select.cc:
Bug#45266: Uninitialized variable lead to an empty result.
The open_table function now initializes the TABLE::reginfo.impossible_range
variable.
sql/structs.h:
Bug#45266: Uninitialized variable lead to an empty result.
A comment is added.
The problem: described in the bug report.
The fix:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
client/mysql.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/ha_ndbcluster_binlog.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/handler.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/log.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/mysqld.cc:
removed unnecessary line
sql/parse_file.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_acl.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_base.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_db.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_delete.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_partition.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_rename.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_show.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_table.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
sql/sql_view.cc:
--increase buffers where it's necessary
(buffers which are used in stxnmov)
--decrease buffer lengths which are used
as argument for strxnmov function
