The ASAN report was made in the parallel slave execution of a query
event and implicitly involved (so also parallelly run) Format-Description
event.
The Query actually had unexpected impossible dependency on a preceding
"old" FD whose instance got destructed, to cause the ASAN error.
The case is fixed with storing the FD's value into Query-log-event
at its instantiating on slave. The stored value is from the very
FD of the Query's original binlog so remains to be correct
at the query event applying.
The branch C. of a new rpl_parallel_29322.test also demonstrates
(may need few --repeat though) the bug in its simple form of the same
server version binlog.
don't assume anymore that OPTIONS_WRITTEN_TO_BIN_LOG is fixed once
and forever. Instead, deduct master's OPTIONS_WRITTEN_TO_BIN_LOG
from the master's version in binlog.
This patch fixes two issues:
First, it fixes test failure due to GTID List events
having inconsistent ordering of domain ids. In
particular, this patch ensures that a GTID list log
event will have its GTIDs ordered by domain id
(ascending) followed by sequence number (ascending).
Second, it fixes an assert which could use an
unintialized variable.
Reviewed By:
============
Andrei Elkin <andrei.elkin@mariadb.com>
This commit implements two phase binloggable ALTER.
When a new
@@session.binlog_alter_two_phase = YES
ALTER query gets logged in two parts, the START ALTER and the COMMIT
or ROLLBACK ALTER. START Alter is written in binlog as soon as
necessary locks have been acquired for the table. The timing is
such that any concurrent DML:s that update the same table are either
committed, thus logged into binary log having done work on the old
version of the table, or will be queued for execution on its new
version.
The "COMPLETE" COMMIT or ROLLBACK ALTER are written at the very point
of a normal "single-piece" ALTER that is after the most of
the query work is done. When its result is positive COMMIT ALTER is
written, otherwise ROLLBACK ALTER is written with specific error
happened after START ALTER phase.
Replication of two-phase binloggable ALTER is
cross-version safe. Specifically the OLD slave merely does not
recognized the start alter part, still being able to process and
memorize its gtid.
Two phase logged ALTER is read from binlog by mysqlbinlog to produce
BINLOG 'string', where 'string' contains base64 encoded
Query_log_event containing either the start part of ALTER, or a
completion part. The Query details can be displayed with `-v` flag,
similarly to ROW format events. Notice, mysqlbinlog output containing
parts of two-phase binloggable ALTER is processable correctly only by
binlog_alter_two_phase server.
@@log_warnings > 2 can reveal details of binlogging and slave side
processing of the ALTER parts.
The current commit also carries fixes to the following list of
reported bugs:
MDEV-27511, MDEV-27471, MDEV-27349, MDEV-27628, MDEV-27528.
Thanks to all people involved into early discussion of the feature
including Kristian Nielsen, those who helped to design, implement and
test: Sergei Golubchik, Andrei Elkin who took the burden of the
implemenation completion, Sujatha Sivakumar, Brandon
Nesterenko, Alice Sherepa, Ramesh Sivaraman, Jan Lindstrom.
New Feature:
===========
This commit extends the mariadb-binlog capabilities to allow events
to be filtered by GTID ranges. More specifically, the
--start-position and --stop-position arguments have been extended to
accept values formatted as a list of GTID positions, e.g.
--start-position=0-1-0,1-2-55. The following specific capabilities
are addressed:
1) GTIDs can be used to filter results on local binlog files
2) GTIDs can be used to filter results from remote servers
3) Implemented --gtid-strict-mode that ensures the GTID event
stream in each domain is monotonically increasing
4) Added new level of verbosity in mysqlbinlog -vvv to print
additional diagnostic information/warnings about invalid GTID
states
5) For a given GTID range, its start and stop position parameters
aim to mimic the behaviors of
CHANGE MASTER TO MASTER_USE_GTID=slave_pos and
START SLAVE UNTIL master_gtid_pos=<GTID>, respectively. In
particular, the start-position list expresses a gtid state of
the server, similarly to how @@global.gtid_slave_pos expresses
the gtid state of a slave server when connecting to a master
with MASTER_USE_GTID=slave_pos.
The GTID start-position list is exclusive and the
stop-position list is inclusive. This allows users to receive
events strictly after those that they already have, and is
useful in cases of point in (logical) time recovery including
1) events were received out of order and should be re-sent, or
2) specifying the gtid state of a slave to get events newer
than their current state. If a seq_no is 0 for start-position,
it means to include the entirety of the domain. If a seq_no is
0 for stop-position, it means to exclude all events from that
domain. The GTIDs provided in a start position argument must
match with the GTID state of the first processed log (i.e.
those listed in the Gtid_list event). If a stop position is
provided, the events that are output are limited to only those
with domain ids listed in the argument. When specifying
combinations of start and stop positions, the following
behaviors are expected:
[--start-position without --stop-position]: Events that have domain
ids in the start position are output if their seq_no occurs after
the respective start position. Events with domain ids that are
unspecified in the start position list are also output. Note that if
the Gtid_list event of the first binary log is populated (i.e.
non-empty), each domain in the Gtid_list must be present in the
start-position list with a seq_no at or after the listed value.
This behavior mimics how a slave only processes events after the
state provided by @@global.gtid_slave_pos when connecting to a
master with CHANGE MASTER TO MASTER_USE_GTID=slave_pos.
[--stop-position without --start-position]: Output is limited to
only events with both 1) domain ids that are present in the given
stop position list and 2) seq_nos that are less than or equal to
their respective stop GTID. Once all GTIDs in the stop position
list have been processed, the program will stop processing log
files. This behavior mimics how
START SLAVE UNTIL master_gtid_pos=<G>
has a slave only process events with domain ids present in G with
their seq_nos at or before the respective gtid.
[--start-position and --stop-position]: Output consists of the
intersection between the events permitted by both the start and stop
position rules. More concretely, the output can be defined by a
union of the following rules:
1. For domains which exist in both the start and stop position
lists, the events which exist in-between these positions
(exclusive start, inclusive stop) are output
2. For all other events, the rules of
[--stop-position without --start-position] are followed
This is due to the implicit filtering within each individual rule.
Even though the start position rule always includes events from
unspecified domains, the stop position rule takes precedence because
it always excludes events from unspecified domains. In other words,
events which the start position rule would have included would then
always be excluded by the stop position rule.
[neither --start-position nor --stop-position]: Events are not
omitted based on GTID positioning; however, --gtid-strict-mode and
-vvv can still analyze gtid correctness for warning and error
reporting.
[repeated specification of --start-position or --stop-position]:
Subsequent specifications of start and stop positions completely
override previous ones. E.g., if invoked as
mysqlbinlog --start-position=<G1> --start-position=<G2> ...
All GTIDs specified in G1 are ignored and only those specified in G2
are used for the start position.
A few additional notes:
1) this commit squashes together the commits:
f4319661120e-78a9d49907ba
2) Changed rpl.rpl_blackhole_row_annotate test because it has
out of order GTIDs in its binlog, so I added
--skip-gtid-strict-mode
3) After all binlog events have been written, the session server
id and domain id are reset to their values in the global state
Reviewed By:
===========
Andrei Elkin: <andrei.elkin@mariadb.com>
Problem:
=======
When the semisync master is crashed and restarted as slave it could
recover transactions that former slaves may never have seen.
A known method existed to clear out all prepared transactions
with --tc-heuristic-recover=rollback does not care to adjust
binlog accordingly.
Fix:
===
The binlog-based recovery is made to concern of the slave semisync role of
post-crash restarted server.
No changes in behavior is done to the "normal" binloggging server
and the semisync master.
When the restarted server is configured with
--rpl-semi-sync-slave-enabled=1
the refined recovery attempts to roll back prepared transactions
and truncate binlog accordingly.
In case of a partially committed (that is committed at least
in one of the engine participants) such transaction gets committed.
It's guaranteed no (partially as well) committed transactions
exist beyond the truncate position.
In case there exists a non-transactional replication event
(being in a way a committed transaction) past the
computed truncate position the recovery ends with an error.
As after master crash and failover to slave, the demoted-to-slave
ex-master must be ready to face and accept its own (generated by)
events, without generally necessary --replicate-same-server-id.
So the acceptance conditions are relaxed for the semisync slave
to accept own events without that option.
While gtid_strict_mode ON ensures no duplicate transaction can be
(re-)executed the master_use_gtid=none slave has to be
configured with --replicate-same-server-id.
*NOTE* for reviewers.
This patch does not handle the user XA which is done
in next git commit.
- Major rewrite of ddl_log.cc and ddl_log.h
- ddl_log.cc described in the beginning how the recovery works.
- ddl_log.log has unique signature and is dynamic. It's easy to
add more information to the header and other ddl blocks while still
being able to execute old ddl entries.
- IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
recovery of old logs.
- Code is more modular and is now usable outside of partition handling.
- Renamed log file to dll_recovery.log and added option --log-ddl-recovery
to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
crash testing and allow crash after a given number of times a probe
is executed. See comments in debug_sync.cc and rename_table.test for
how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
to check if a ddl log entry was logged to the binary log (if yes,
it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
we have a crash in ddl recovery code the server will not get stuck
in a forever crash-restart-crash loop.
mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement
storage engine changes:
- maria_rename() was changed to be more robust against crashes during
rename.
This change is to get rid of randomly failing tests, especially those
that reads random position of the binary log. From looking at the logs
it's clear that some failures is because of a read char (with value >= 128)
is converted to a big long value. Using uchar everywhere makes this much
less likely to happen.
Another benefit is that a lot of cast of char to uchar could be removed.
Other things:
- Removed some extra space before '=' and '+=' in assignments
- Fixed indentations and lines > 80 characters
- Replace '16' with 'element_size' (from class definition) in
Gtid_list_log_event()
Problem:
=======
The ALWAYS option of the mariadb-binlog --base64-output flag
formats its output incorrectly. This option is deprecated, and
MySQL 8.0 has removed it entirely.
Solution:
========
Adhere to MySQL and remove this option from MariaDB.
Behavioral Changes:
==================
Use Case: ./mariadb-binlog --base64-output
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating incomplete argument
Use Case: ./mariadb-binlog --base64-output=always
Previous Behavior: Sets base64-output mode to always
New Behavior: Error message indicating invalid argument value
Reviewed By:
==========
Andrei Elkin: <andrei.elkin@mariadb.com>
Problem:
========
180511 11:07:58 [ERROR] Slave I/O: Unexpected master's heartbeat data:
heartbeat is not compatible with local info;the event's data: log_file_name
mysql-bin.000009 log_pos 1054262041, Error_code: 1623
Analysis:
=========
In replication setup when master server doesn't have any events to send to
slave server it sends an 'Heartbeat_log_event'. This event carries the
current binary log filename and offset details. The offset values is stored
within 4 bytes of event header. When the size of binary log is higher than
UINT32_MAX the log_pos values will not fit in 4 bytes memory. It overflows
and hence slave stops with an error.
Fix:
===
Since we cannot extend the common_header of Log_event class, a greater than
4GB value of Log_event::log_pos is made to be transported with a HeartBeat
event's sub-header. Log_event::log_pos in such case is set to zero to
indicate that the 8 byte sub-header is allocated in the event.
In case of cross version replication following behaviour is expected
OLD - Server without fix
NEW - Server with fix
OLD<->NEW : works bidirectionally as long as the binlog offset is
(normally) within 4GB.
When log_pos > UINT32_MAX
OLD->NEW : The 'log_pos' is bound to overflow and NEW slave may report
an invalid event/incompatible heart beat event error.
NEW->OLD : Since patched server sets log_pos=0 on overflow, OLD slave will
report invalid event error.
(This commit is for 10.3 and upper branches)
In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
BINLOG '
base64 encoded data for A
### verbose section for A
base64 encoded data for B
### verbose section for B
'/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.
The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
BINLOG '
base64 encoded data for A
base64 encoded data for B
'/*!*/;
### verbose section for A
### verbose section for B
Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.
(This commit is exclusively for 10.2 branch. Do not merge it to 10.3)
In case of a pattern of non-STMT_END-marked Rows-log-event (A) followed by
a STMT_END marked one (B) mysqlbinlog mixes up the base64 encoded rows events
with their pseudo sql representation produced by the verbose option:
BINLOG '
base64 encoded data for A
### verbose section for A
base64 encoded data for B
### verbose section for B
'/*!*/;
In effect the produced BINLOG '...' query is not valid and is rejected with the error.
Examples of this way malformed BINLOG could have been found in binlog_row_annotate.result
that gets corrected with the patch.
The issue is fixed with introduction an auxiliary IO_CACHE to hold on the verbose
comments until the terminal STMT_END event is found. The new cache is emptied
out after two pre-existing ones are done at that time.
The correctly produced output now for the above case is as the following:
BINLOG '
base64 encoded data for A
base64 encoded data for B
'/*!*/;
### verbose section for A
### verbose section for B
Thanks to Alexey Midenkov for the problem recognition and attempt to tackle,
and to Venkatesh Duggirala who produced a patch for the upstream whose
idea is exploited here, as well as to MDEV-23077 reporter LukeXwang who
also contributed a piece of a patch aiming at this issue.
When converting a table (test.s3_table) from S3 to another engine, the
following will be logged to the binary log:
DROP TABLE IF EXISTS test.t1;
CREATE OR REPLACE TABLE test.t1 (...) ENGINE=new_engine
INSERT rows to test.t1 in binary-row-log-format
The bug is that the above statements are logged one by one to the binary
log. This means that a fast slave, configured to use the same S3 storage
as the master, would be able to execute the DROP and CREATE from the
binary log before the master has finished the ALTER TABLE.
In this case the slave would ignore the DROP (as it's on a S3 table) but
it will stop on CREATE of the local tale, as the table is still exists in
S3. The REPLACE part will be ignored by the slave as it can't touch the
S3 table.
The fix is to ensure that all the above statements is written to binary
log AFTER the table has been deleted from S3.
MDEV-21604
Added "virtual" low level write function encrypt_or_write that is set
to point to either normal or encrypted write functions.
This patch also fixes a possible memory leak if writing to binary log fails.
MDEV-21605 Clean up and speed up interfaces for binary row logging
MDEV-21617 Bug fix for previous version of this code
The intention is to have as few 'if' as possible in ha_write() and
related functions. This is done by pre-calculating once per statement the
row_logging state for all tables.
Benefits are simpler and faster code both when binary logging is disabled
and when it's enabled.
Changes:
- Added handler->row_logging to make it easy to check it table should be
row logged. This also made it easier to disabling row logging for system,
internal and temporary tables.
- The tables row_logging capabilities are checked once per "statements
that updates tables" in THD::binlog_prepare_for_row_logging() which
is called when needed from THD::decide_logging_format().
- Removed most usage of tmp_disable_binlog(), reenable_binlog() and
temporary saving and setting of thd->variables.option_bits.
- Moved checks that can't change during a statement from
check_table_binlog_row_based() to check_table_binlog_row_based_internal()
- Removed flag row_already_logged (used by sequence engine)
- Moved binlog_log_row() to a handler::
- Moved write_locked_table_maps() to THD::binlog_write_table_maps() as
most other related binlog functions are in THD.
- Removed binlog_write_table_map() and binlog_log_row_internal() as
they are now obsolete as 'has_transactions()' is pre-calculated in
prepare_for_row_logging().
- Remove 'is_transactional' argument from binlog_write_table_map() as this
can now be read from handler.
- Changed order of 'if's in handler::external_lock() and wsrep_mysqld.h
to first evaluate fast and likely cases before more complex ones.
- Added error checking in ha_write_row() and related functions if
binlog_log_row() failed.
- Don't clear check_table_binlog_row_based_result in
clear_cached_table_binlog_row_based_flag() as it's not needed.
- THD::clear_binlog_table_maps() has been replaced with
THD::reset_binlog_for_next_statement()
- Added 'MYSQL_OPEN_IGNORE_LOGGING_FORMAT' flag to open_and_lock_tables()
to avoid calculating of binary log format for internal opens. This flag
is also used to avoid reading statistics tables for internal tables.
- Added OPTION_BINLOG_LOG_OFF as a simple way to turn of binlog temporary
for create (instead of using THD::sql_log_bin_off.
- Removed flag THD::sql_log_bin_off (not needed anymore)
- Speed up THD::decide_logging_format() by remembering if blackhole engine
is used and avoid a loop over all tables if it's not used
(the common case).
- THD::decide_logging_format() is not called anymore if no tables are used
for the statement. This will speed up pure stored procedure code with
about 5%+ according to some simple tests.
- We now get annotated events on slave if a CREATE ... SELECT statement
is transformed on the slave from statement to row logging.
- In the original code, the master could come into a state where row
logging is enforced for all future events if statement could be used.
This is now partly fixed.
Other changes:
- Ensure that all tables used by a statement has query_id set.
- Had to restore the row_logging flag for not used tables in
THD::binlog_write_table_maps (not normal scenario)
- Removed injector::transaction::use_table(server_id_type sid, table tbl)
as it's not used.
- Cleaned up set_slave_thread_options()
- Some more DBUG_ENTER/DBUG_RETURN, code comments and minor indentation
changes.
- Ensure we only call THD::decide_logging_format_low() once in
mysql_insert() (inefficiency).
- Don't annotate INSERT DELAYED
- Removed zeroing pos_in_table_list in THD::open_temporary_table() as it's
already 0
MDEV-19964 S3 replication support
Added new configure options:
s3_slave_ignore_updates
"If the slave has shares same S3 storage as the master"
s3_replicate_alter_as_create_select
"When converting S3 table to local table, log all rows in binary log"
This allows on to configure slaves to have the S3 storage shared or
independent from the master.
Other thing:
Added new session variable '@@sql_if_exists' to force IF_EXIST to DDL's.
Lifted long standing limitation to the XA of rolling it back at the
transaction's
connection close even if the XA is prepared.
Prepared XA-transaction is made to sustain connection close or server
restart.
The patch consists of
- binary logging extension to write prepared XA part of
transaction signified with
its XID in a new XA_prepare_log_event. The concusion part -
with Commit or Rollback decision - is logged separately as
Query_log_event.
That is in the binlog the XA consists of two separate group of
events.
That makes the whole XA possibly interweaving in binlog with
other XA:s or regular transaction but with no harm to
replication and data consistency.
Gtid_log_event receives two more flags to identify which of the
two XA phases of the transaction it represents. With either flag
set also XID info is added to the event.
When binlog is ON on the server XID::formatID is
constrained to 4 bytes.
- engines are made aware of the server policy to keep up user
prepared XA:s so they (Innodb, rocksdb) don't roll them back
anymore at their disconnect methods.
- slave applier is refined to cope with two phase logged XA:s
including parallel modes of execution.
This patch does not address crash-safe logging of the new events which
is being addressed by MDEV-21469.
CORNER CASES: read-only, pure myisam, binlog-*, @@skip_log_bin, etc
Are addressed along the following policies.
1. The read-only at reconnect marks XID to fail for future
completion with ER_XA_RBROLLBACK.
2. binlog-* filtered XA when it changes engine data is regarded as
loggable even when nothing got cached for binlog. An empty
XA-prepare group is recorded. Consequent Commit-or-Rollback
succeeds in the Engine(s) as well as recorded into binlog.
3. The same applies to the non-transactional engine XA.
4. @@skip_log_bin=OFF does not record anything at XA-prepare
(obviously), but the completion event is recorded into binlog to
admit inconsistency with slave.
The following actions are taken by the patch.
At XA-prepare:
when empty binlog cache - don't do anything to binlog if RO,
otherwise write empty XA_prepare (assert(binlog-filter case)).
At Disconnect:
when Prepared && RO (=> no binlogging was done)
set Xid_cache_element::error := ER_XA_RBROLLBACK
*keep* XID in the cache, and rollback the transaction.
At XA-"complete":
Discover the error, if any don't binlog the "complete",
return the error to the user.
Kudos
-----
Alexey Botchkov took to drive this work initially.
Sergei Golubchik, Sergei Petrunja, Marko Mäkelä provided a number of
good recommendations.
Sergei Voitovich made a magnificent review and improvements to the code.
They all deserve a bunch of thanks for making this work done!
Problem:
=======
P1) Conditional jump or move depends on uninitialised value(s)
sql_ex_info::init(char const*, char const*, bool) (log_event.cc:3083)
code: All the following variables are not initialized.
----
return ((cached_new_format != -1) ? cached_new_format :
(cached_new_format=(field_term_len > 1 || enclosed_len > 1 ||
line_term_len > 1 || line_start_len > 1 || escaped_len > 1)));
P2) Conditional jump or move depends on uninitialised value(s)
Rows_log_event::Rows_log_event(char const*, unsigned
int, Format_description_log_event const*) (log_event.cc:9571)
Code: Uninitialized values is reported for 'var_header_len' variable.
----
if (var_header_len < 2 || event_len < static_cast<unsigned
int>(var_header_len + (post_start - buf)))
P3) Conditional jump or move depends on uninitialised value(s)
Table_map_log_event::pack_info(Protocol*) (log_event.cc:11553)
code:'m_table_id' is uninitialized.
----
void Table_map_log_event::pack_info(Protocol *protocol)
...
size_t bytes= my_snprintf(buf, sizeof(buf), "table_id: %lu (%s.%s)",
m_table_id, m_dbnam, m_tblnam);
Fix:
===
P1 - Fix)
Initialize cached_new_format,field_term_len, enclosed_len, line_term_len,
line_start_len, escaped_len members in default constructor.
P2 - Fix)
"var_header_len" is initialized by reading the event buffer. In case of an
invalid event the buffer will contain invalid data. Hence added a check to
validate the event data. If event_len is smaller than valid header length
return immediately.
P3 - Fix)
'm_table_id' within Table_map_log_event is initialized by reading data from
the event buffer. Use 'VALIDATE_BYTES_READ' macro to validate the current
state of the buffer. If it is invalid return immediately.
This PR contains a mtr test for reproducing a failure with replicating create table as select statement (CTAS) through asynchronous mariadb replication to mariadb galera cluster.
The problem happens when CTAS replication contains both create table statement followed by row events for populating the table. In such situation, the galera node operating as mariadb replication slave, will first replicate only the create table part into the cluster, and then perform another replication containing both the create table and row events. This will lead all other nodes to fail for duplicate table create attempt, and crash due to this failure.
PR contains also a fix, which identifies the situation when CTAS has been replicated, and makes further scan in async replication stream to see if there are following row events. The slave node will replicate either single TOI in case the CTAS table is empty, or if CTAS table contains rows, then single bundled write set with create table and row events is replicated to galera cluster.
This fix should keep master server's GTID's for CTAS replication in sync with GTID's in galera cluster.
Cherry-pick the commits the mysql and some changes.
WL#4618 RBR: extended table metadata in the binary log
This patch extends Table Map Event. It appends some new fields for
more metadata. The new metadata includes:
- Signedness of Numberic Columns
- Character Set of Character Columns and Binary Columns
- Column Name
- String Value of SET Columns
- String Value of ENUM Columns
- Primary Key
- Character Set of SET Columns and ENUM Columns
- Geometry Type
Some of them are optional, the patch introduces a GLOBAL system
variable to control it. It is binlog_row_metadata.
- Scope: GLOBAL
- Dynamic: Yes
- Type: ENUM
- Values: {NO_LOG, MINIMAL, FULL}
- Default: NO_LOG
Only Signedness, character set and geometry type are logged if it is MINIMAL.
Otherwise all of them are logged.
Also add a binlog_type_info() to field, So that we can have extract
relevant binlog info from field.
