This crash occured if the same debug trace file was closed twice,
leading to the same memory being free'd twice. This could occur
if the "debug" server system variable refered to the same trace
file in both global and session scope.
Example of an order of events that would lead to a crash:
1) Enable debug tracing to a trace file (global scope)
2) Enable debug tracing to the same trace file (session scope)
3) Reset debug settings (global scope)
4) Reset debug settings (session scope)
This caused a crash because the trace file was, by mistake, closed
in 3), leading to the same memory being free'd twice when the file
was closed again in 4).
Internally, the debug settings are stored in a stack, with session
settings (if any) on top and the global settings below. Each connection
has its own stack. When a set of settings is changed, it must be
determined if its debug trace file is to be closed. Before, this was done
by only checking below on the settings stack. So if the global settings
were changed, an existing debug trace file reference in session settings
would be missed. This caused the file to be closed even if it was in use,
leading to a crash later when it was closed again.
This patch fixes the problem by preventing the trace file from being shared
between global and session settings. If session debug settings are set without
specifying a new trace file, stderr is used for output. This is a change
in behaviour and should be reflected in the documentation.
Test case added to variables.test.
This patch implements I_S.PLUGINS.LOAD_OPTION column
as specified by WL#5496.
mysql-test/r/plugin_load_option.result:
A test case for WL#5496.
mysql-test/suite/funcs_1/r/is_columns_is.result:
Adjusted a test case according to WL#5496.
mysql-test/t/plugin_load_option.test:
A test case for WL#5496.
sql/sql_show.cc:
Added LOAD_OPTION column to I_S.PLUGINS.
This patch implements "permanent" load option for
plugins as specified by WL#5341.
mysql-test/r/plugin_load_option.result:
A test case for WL#5341.
mysql-test/t/plugin_load_option-master.opt:
A test case for WL#5341.
mysql-test/t/plugin_load_option.test:
A test case for WL#5341.
sql/share/errmsg-utf8.txt:
An error message for WL#5341.
sql/sql_plugin.cc:
Added FORCE_PLUS_PERMANENT plugin load option.
sql/sql_plugin.h:
Expose and use plugin load option instead of
is_mandatory flag. This is a requirement for
to-be-implemented WL5496.
but broken.
Before this patch, it was allowed to use stored functions in
HANDLER ... READ statements. The problem was that this functionality
was not really supported by the code. Proper locking would for example
not be performed, and it was also possible to break replication by
having stored functions that performed updates.
This patch disallows the use of stored functions in HANDLER ... READ.
Any such statement will now give an ER_NOT_SUPPORTED_YET error.
This is an incompatible change and should be reflected in the
documentation.
Test case added to handler_myisam/handler_innodb.test.
In case of outer join and emtpy WHERE conditon
'always true' condition is created for WHERE clasue.
Later in mysql_select() original SELECT_LEX WHERE
condition is overwritten with created cond.
However SELECT_LEX condition is also used as inital
condition in mysql_select()->JOIN::prepare().
On second execution of PS modified SELECT_LEX condition
is taken and it leads to crash.
The fix is to restore original SELECT_LEX condition
(set to NULL if original cond is NULL) in
reinit_stmt_before_use().
HAVING clause is fixed too for safety reason
(no test case as I did not manage to think out
appropriate example).
mysql-test/r/ps.result:
test case
mysql-test/t/ps.test:
test case
sql/sql_prepare.cc:
restore original SELECT_LEX condition
(set to NULL if original cond is NULL) in
reinit_stmt_before_use()
Fixed a number of memory leaks discovered by valgrind.
dbug/dbug.c:
This is actually an addendum to the fix for bug #52629:
- there is no point in limiting the fix to just global
variables, session ones are also affected.
- zero all fields when allocating a new 'state' structure so
that FreeState() does not deal with unitialized data later.
- add a check for a NULL pointer in DBUGCloseFile()
mysql-test/r/partition_error.result:
Added a test case for bug #56709.
mysql-test/r/variables_debug.result:
Added a test case for bug #56709.
mysql-test/t/partition_error.test:
Added a test case for bug #56709.
mysql-test/t/variables_debug.test:
Added a test case for bug #56709.
sql/item_timefunc.cc:
There is no point in declaring 'value' as a member of
Item_extract and dynamically allocating memory for it in
Item_extract::fix_length_and_dec(), since this string is only
used as a temporary storage in Item_extract::val_int().
sql/item_timefunc.h:
Removed 'value' from the Item_extract class definition.
sql/sql_load.cc:
- we may need to deallocate 'buffer' even when 'error' is
non-zero in some cases, since 'error' is public, and there is
external code modifying it.
- assign NULL to buffer when deallocating it so that we don't
do it twice in the destructor
- there is no point in changing 'error' in the destructor.
Added --enable-connect-log, somewhet similar to --enable-query-log
If query log is disabled, disable connect log too
Also some related cleanup in mysqltest.test: removing duplicate test loop
REPAIR of merge table
Bug #56422 CHECK TABLE run when the table is locked reports
corruption along with timeout
The crash happened if a table maintenance statement (ANALYZE TABLE,
REPAIR TABLE, etc.) was executed on a MERGE table and opening and
locking a child table failed. This could for example happen if a child
table did not exist or if a lock timeout happened while waiting for
a conflicting metadata lock to disappear.
Since opening and locking the MERGE table and its children failed,
the tables would be closed and the metadata locks released.
However, TABLE_LIST::table for the MERGE table would still be set,
with its value invalid since the tables had been closed.
This caused the table maintenance statement to try to continue
and upgrade the metadata lock on the MERGE table. But since the lock
already had been released, this caused a segfault.
This patch fixes the problem by setting TABLE_LIST::table to NULL
if open_and_lock_tables() fails. This prevents maintenance
statements from continuing and trying to upgrade the metadata lock.
The patch includes a 5.5 version of the fix for
Bug #46339 crash on REPAIR TABLE merge table USE_FRM.
This bug caused REPAIR TABLE ... USE_FRM to give an assert
when used on merge tables.
The patch also enables the CHECK TABLE statement for log tables.
Before, CHECK TABLE for log tables gave ER_CANT_LOCK_LOG_TABLE,
yet still counted the statement as successfully executed.
With the changes to table maintenance statement error handling
in this patch, CHECK TABLE would no longer be considered as
successful in this case. This would have caused upgrade scripts
to mistakenly think that the general and slow logs are corrupted
and have to be repaired. Enabling CHECK TABLES for log tables
prevents this from happening.
Finally, the patch changes the error message from "Corrupt" to
"Operation failed" for a number of issues not related to table
corruption. For example "Lock wait timeout exceeded" and
"Deadlock found trying to get lock".
Test cases added to merge.test and check.test.
Fixed incorrect handling of user credentials when authenticating
via proxy user. Now the server will use the proxies user's
access mask and host to update the security context runtime
structure when logging in.
Fixed a compilation warning with the embedded library.
Fixed a crash when doing a second GRANT PROXY on ''@'' due to
incomplete equality check logic.
tree for embedded server
Test case for bug #56251 "Deadlock with INSERT
DELAYED and MERGE tables" can't be run against
embedded server. Embedded server converts all
DELAYED INSERTs into ordinary INSERTs and this
test can't work properly if such conversion
happens.
Moved this test from merge.test to delayed.test
which is skipped if test suite is run with
--embedded-server option.
Subselect executes twice, at JOIN::optimize stage
and at JOIN::execute stage. At optimize stage
Innodb prebuilt struct which is used for the
retrieval of column values is initialized in.
ha_innobase::index_read(), prebuilt->sql_stat_start is true.
After QUICK_ROR_INTERSECT_SELECT finished his job it
restores read_set/write_set bitmaps with initial values
and deactivates one of the handlers used by
QUICK_ROR_INTERSECT_SELECT in JOIN::cleanup
(it's the case when we reuse original handler as one of
handlers required by QUICK_ROR_INTERSECT_SELECT object).
On second subselect execution inactive handler is activated
in QUICK_RANGE_SELECT::reset, file->ha_index_init().
In ha_index_init Innodb prebuilt struct is reinitialized
with inappropriate read_set/write_set bitmaps. Further
reinitialization in ha_innobase::index_read() does not
happen as prebuilt->sql_stat_start is false.
It leads to partial retrieval of required field values
and we get a mix of field values from different records
in the record buffer.
The fix is to reset
read_set/write_set bitmaps as these values
are required for proper intialization of
internal InnoDB struct which is used for
the retrieval of column values
(see build_template(), ha_innodb.cc)
mysql-test/include/index_merge_ror_cpk.inc:
test case
mysql-test/r/index_merge_innodb.result:
test case
mysql-test/r/index_merge_myisam.result:
test case
sql/opt_range.cc:
if ROR merge scan is used we need to reset
read_set/write_set bitmaps as these values
are required for proper intialization of
internal InnoDB struct which is used for
the retrieval of column values
(see build_template(), ha_innodb.cc)
The problem was that RENAME TABLE caused an assert if the system variable
lower_case_table_names was 2 (default on Mac OS X) and the old table name
was given in upper case. This caused lowercase_table2.test to fail.
The assert checks that an exclusive metadata lock is held by the connection
trying to do RENAME TABLE - specificially during updates of table triggers.
The assert was triggered since the check is case sensitive and the lock
was held on the normalized (lower case) version of the table name.
This patch fixes the problem by making sure a normalized version of the
table name is used for the metadata lock check, while using a non-normalized
version of the table name for the rename of trigger files. The same is done
for ALTER TABLE ... RENAME.
Regression testing for the bug itself is already covered by
lowercase_table2.test. Additional coverage added to lowercase_fs_off.test.
When having a sub query in partitioned innodb one could
make the partitioning engine to search for a 'index_next_same'
on a partition that had not been initialized.
Problem was that the subselect function looks at table->status
which was not set in the partitioning handler when it skipped
scanning due to no matching partitions found.
Fixed by setting table->status = STATUS_NOT_FOUND when
there was no partitions to scan. (If there are partitions to
scan, it will be set in the partitions handler.)
mysql-test/r/partition_innodb.result:
added result
mysql-test/t/partition_innodb.test:
added test
sql/ha_partition.cc:
set table status to not found, if there ar no partitions to scan.
tables".
Attempting to issue an INSERT DELAYED statement for a MERGE
table might have caused a deadlock if it happened as part of
a transaction or under LOCK TABLES, and there was a concurrent
DDL or LOCK TABLES ... WRITE statement which tried to lock one
of its underlying tables.
The problem occurred when a delayed insert handler thread tried
to open a MERGE table and discovered that to do this it had also
to open all underlying tables and hence acquire metadata
locks on them. Since metadata locks on the underlying tables were
not pre-acquired by the connection thread executing INSERT DELAYED,
attempts to do so might lead to waiting. In this case the
connection thread had to wait for the delayed insert thread.
If the thread which was preventing the lock on the underlying table
from being acquired had to wait for the connection thread (due to
this or other metadata locks), a deadlock occurred.
This deadlock was not detected by the MDL deadlock detector since
waiting for the handler thread by the connection thread is not
represented in the wait-for graph.
This patch solves the problem by ensuring that the delayed
insert handler thread never tries to open underlying tables
of a MERGE table. Instead open_tables() is aborted right after
the parent table is opened and a ER_DELAYED_NOT_SUPPORTED
error is emitted (which is passed to the connection thread and
ultimately to the user).
mysql-test/r/merge.result:
Added test for bug #56251 "Deadlock with INSERT DELAYED and
MERGE tables".
mysql-test/t/merge.test:
Added test for bug #56251 "Deadlock with INSERT DELAYED and
MERGE tables".
sql/sql_base.cc:
Changed open_n_lock_single_table() to take prelocking strategy
as an argument instead of always using DML_prelocking_strategy.
sql/sql_base.h:
Changed open_n_lock_single_table() to take prelocking strategy
as an argument instead of always using DML_prelocking_strategy.
Added a version of this function which is compatible with old
signature.
sql/sql_insert.cc:
When opening MERGE table in delayed insert thread stop and emit
ER_DELAYED_NOT_SUPPORTED right after opening main table and
before opening underlying tables. This ensures that we won't
try to acquire metadata lock on underlying tables which might
lead to a deadlock.
This is achieved by using special prelocking strategy which
abort open_tables() process as soon as we discover that we
have opened table with engine which doesn't support delayed
inserts.
ORDER BY computed col
GROUP BY implies ORDER BY in the MySQL dialect of SQL. Therefore, when an
index on the first table in the query is used, and that index satisfies
ordering according to the GROUP BY clause, the query optimizer estimates the
number of tuples that need to be read from this index. If there is a LIMIT
clause, table statistics on tables following this 'sort table' are employed.
There may be a separate ORDER BY clause however, which mandates reading the
whole 'sort table' anyway. But the previous estimate was left untouched.
Fixed by removing the estimate from EXPLAIN output if GROUP BY is used in
conjunction with an ORDER BY clause that mandates using a temporary table.
The problem was that issuing XA END when the XA transaction was
already ended, caused an assertion. This assertion tests that
the server does not try to send OK to the client if there has
already been an error reported. The bug was only noticeable on
debug versions of the server.
The reason for the problem was that the trans_xa_end() function
reported success if the transaction was at XA_IDLE state at the
end regardless of any errors occured during processing of
trans_xa_end(). So if the transaction state was XA_IDLE already,
reported errors would be ignored.
This patch fixes the problem by having trans_xa_end() take into
consideration any reported errors. The patch also fixes a similar
bug with XA PREPARE.
Test case added to xa.test.
Version "5.1.42 SUSE MySQL RPM"
When a query was using a DATE or DATETIME value formatted
using different formatting than "yyyy-mm-dd HH:MM:SS", a
query with a greater-or-equal '>=' condition matched only
greater values in an indexed TIMESTAMP column.
The problem was introduced by the fix for the bug 46362
and partially solved (for DATE and DATETIME columns only)
by the fix for the bug 47925.
The stored_field_cmp_to_item function has been modified
to take into account TIMESTAMP columns like we do for
DATE and DATETIME columns.
mysql-test/r/type_timestamp.result:
Test case for bug #55779.
mysql-test/t/type_timestamp.test:
Test case for bug #55779.
sql/item.cc:
Bug #55779: select does not work properly in mysql server
Version "5.1.42 SUSE MySQL RPM"
The stored_field_cmp_to_item function has been modified
to take into account TIMESTAMP columns like we do for
DATE and DATETIME.
to 5.5 (removed one test case as it is no longer valid).
mysql-test/r/select.result:
Removed a part of the test case for bug#48291 since it is not
valid anymore. The comments for the removed part were actually
describing a side-effect from the problem addressed by the
addendum patch for bug #54190.
mysql-test/t/select.test:
Removed a part of the test case for bug#48291 since it is not
valid anymore. The comments for the removed part were actually
describing a side-effect from the problem addressed by the
addendum patch for bug #54190.
table causes assert failure".
Attempting to use FLUSH TABLE table_list WITH READ LOCK
statement for a MERGE table led to an assertion failure if
one of its children was not present in the list of tables
to be flushed. The problem was not visible in non-debug builds.
The assertion failure was caused by the fact that in such
situations FLUSH TABLES table_list WITH READ LOCK implementation
tried to use (e.g. lock) such child tables without acquiring
metadata lock on them. This happened because when opening tables
we assumed metadata locks on all tables were already acquired
earlier during statement execution and a such assumption was
false for MERGE children.
This patch fixes the problem by ensuring at open_tables() time
that we try to acquire metadata locks on all tables to be opened.
For normal tables such requests are satisfied instantly since
locks are already acquired for them. For MERGE children metadata
locks are acquired in normal fashion.
Note that FLUSH TABLES merge_table WITH READ LOCK will lock for
read both the MERGE table and its children but will flush only
the MERGE table. To flush children one has to mention them in table
list explicitly. This is expected behavior and it is consistent with
usage patterns for this statement (e.g. in mysqlhotcopy script).
mysql-test/r/flush.result:
Added test case for bug #55273 "FLUSH TABLE tm WITH READ LOCK
for Merge table causes assert failure".
mysql-test/t/flush.test:
Added test case for bug #55273 "FLUSH TABLE tm WITH READ LOCK
for Merge table causes assert failure".
sql/sql_base.cc:
Changed lock_table_names() to support newly introduced
MYSQL_OPEN_SKIP_SCOPED_MDL_LOCK flag.
sql/sql_base.h:
Introduced MYSQL_OPEN_SKIP_SCOPED_MDL_LOCK flag for
open_tables() and lock_table_names() which allows to skip
acquiring of global and schema-scope locks when SNW, SNRW or
X metadata locks are acquired.
sql/sql_reload.cc:
Changed "FLUSH TABLES table_list WITH READ LOCK" code not to
cause assert about missing metadata locks when MERGE table is
flushed without one of its underlying tables.
To achieve this we no longer call open_and_lock_tables() with
MYSQL_OPEN_HAS_MDL_LOCK flag so this function automatically
acquires metadata locks on MERGE children if such lock has
not been already acquired at earlier stage. Instead we call
this function with MYSQL_OPEN_SKIP_SCOPED_MDL_LOCK flag to
suppress acquiring of global IX lock in order to keep FLUSH
TABLES table_list WITH READ LOCK compatible with FLUSH TABLE
WITH READ LOCK.
Also changed implementation to use lock_table_names() function
for pre-acquiring of metadata locks instead of custom code.
To implement this change moved setting of open_type member for
table list elements to parser.
sql/sql_yacc.yy:
Now we set acceptable type of table for FLUSH TABLES table_list
WITH READ LOCK at parsing time instead of execution time.
result
Row subqueries producing no rows were not handled as UNKNOWN
values in row comparison expressions.
That was a result of the following two problems:
1. Item_singlerow_subselect did not mark the resulting row
value as NULL/UNKNOWN when no rows were produced.
2. Arg_comparator::compare_row() did not take into account that
a whole argument may be NULL rather than just individual scalar
values.
Before bug#34384 was fixed, the above problems were hidden
because an uninitialized (i.e. without any stored value) cached
object would appear as NULL for scalar values in a row subquery
returning an empty result. After the fix
Arg_comparator::compare_row() would try to evaluate
uninitialized cached objects.
Fixed by removing the aforementioned problems.
mysql-test/r/row.result:
Added a test case for bug #54190.
mysql-test/r/subselect.result:
Updated the result for a test relying on wrong behavior.
mysql-test/t/row.test:
Added a test case for bug #54190.
sql/item_cmpfunc.cc:
If either of the argument rows is NULL, return NULL as the
result of comparison.
sql/item_subselect.cc:
Adjust null_value for Item_singlerow_subselect depending on
whether a row has been produced by the row subquery.
Item_func_spatial_collection::fix_length_and_dec()
changed to use argument's print() method to print
the ER_ILLEGAL_VALUE_FOR_TYPE error.
mysql-test/r/gis.result:
Fix for bug#56679: gis.test: valgrind error
- test result adjusted.
sql/item_geofunc.h:
Fix for bug#56679: gis.test: valgrind error
- use argument's print() method instead of improper val_str()
call in the Item_func_spatial_collection::fix_length_and_dec(), as
it's applicable only for constant items.
ALTER TABLE on a MERGE table could cause a deadlock with two
other connections if we reached a situation where:
1) A connection doing ALTER TABLE can't upgrade to MDL_EXCLUSIVE on the
parent table, but holds TL_READ_NO_INSERT on the child tables.
2) A connection doing DELETE on a child table can't get TL_WRITE on it
since ALTER TABLE holds TL_READ_NO_INSERT.
3) A connection doing SELECT on the parent table can't get TL_READ on
the child tables since TL_WRITE is ahead in the lock queue, but holds
MDL_SHARED_READ on the parent table preventing ALTER TABLE from upgrading.
For regular tables, this deadlock is avoided by having ALTER TABLE
take a MDL_SHARED_NO_WRITE metadata lock on the table. This prevents
DELETE from acquiring MDL_SHARED_WRITE on the table before ALTER TABLE
tries to upgrade to MDL_EXCLUSIVE. In the example above, SELECT would
therefore not be blocked by the pending DELETE as DELETE would not be
able to enter TL_WRITE in the table lock queue.
This patch fixes the problem for merge tables by using the same metadata
lock type for child tables as for the parent table. The child tables will
in this case therefore be locked with MDL_SHARED_NO_WRITE, preventing
DELETE from acquiring a metadata lock and enter into the table lock queue.
Change in behavior: By taking the same metadata lock for child tables
as for the parent table, LOCK TABLE on the parent table will now also
implicitly lock the child tables. Since LOCK TABLE on the parent table
now takes more than one metadata lock, it is possible for LOCK TABLE
... WRITE on the parent table or child tables to give ER_LOCK_DEADLOCK
error.
Test case added to mdl_sync.test.
Merge.test/.result has been updated to reflect the change to LOCK TABLE.
Convertion from a floating point number to a string caused a
crash.
During rare circumstances a String object could crash when
it was requested to allocate new memory.
A crash could occcur in Field_double::val_str() because of
a pointer referencing memory inside a String object which was
of unknown size.
And finally, the geometric collection should not accept
arguments which are non geometric.
mysql-test/r/gis.result:
* Test cases change because we intercept the error behind the
previous crashes much earlier.
sql/field.cc:
* It makes no sense to impose a lower limit on the length
and not setting a upper limit will cause crashes later.
sql/item_geofunc.h:
* Disallow for binding with field- and item types which
differ from MYSQL_TYPE_GEOMETRY types.
The EXISTS transformation has additional switches to catch the known corner
cases that appear when transforming an IN predicate into EXISTS. Guarded
conditions are used which are deactivated when a NULL value is seen in the
outer expression's row. When the inner query block supplies NULL values,
however, they are filtered out because no distinction is made between the
guarded conditions; guarded NOT x IS NULL conditions in the HAVING clause that
filter out NULL values cannot be de-activated in isolation from those that
match values or from the outer expression or NULL's.
The above problem is handled by making the guarded conditions remember whether
they have rejected a NULL value or not, and index access methods are taking
this into account as well.
The bug consisted of
1) Not resetting the property for every nested loop iteration on the inner
query's result.
2) Not propagating the NULL result properly from inner query to IN optimizer.
3) A hack that may or may not have been needed at some point. According to a
comment it was aimed to fix#2 by returning NULL when FALSE was actually
the result. This caused failures when #2 was properly fixed. The hack is
now removed.
The fix resolves all three points.
multi-table UPDATE IGNORE.
The problem was that if there was an active SELECT statement
during trigger execution, an error risen during the execution
may cause a crash. The fix is to temporary reset LEX::current_select
before trigger execution and restore it afterwards. This way
errors risen during the trigger execution are processed as
if there was no active SELECT.
mysql-test/r/trigger_notembedded.result:
added test case result for bug #55421.
mysql-test/t/trigger_notembedded.test:
added test case for bug #55421.
sql/sql_trigger.cc:
Reset thd->lex->current_select before start trigger execution
and restore its original value after execution is finished.
This is neccessery in order to set error status in
diagnostic_area in case of trigger execution failure.
inited==INDEX
When an error occurs while sending the data in a temporary table there was no
cleanup performed. This caused a failed assertion in the case when different
access methods were used for populating the table vs. retrieving the data from
the table if IGNORE was specified and sql_safe_updates = 0. In this case
execution continues, but the handler expects to continue with the access
method used for row retrieval.
Fixed by doing the cleanup even if errors occur.
The Item_func_str_to_date class wasn't providing correct integer DATETIME
representation as expected. This led to wrong comparison result and didn't
allowed the STR_TO_DATE function to be used with indexes.
Also, STR_TO_DATE function was inconsisted on throwing warnings/errors.
Fixed now.
val_int and result_as_longlong methods were added to the Item_func_str_to_date
class.
mysql-test/r/func_time.result:
Test case result adjusted after fixing bug#56271.
mysql-test/r/parser.result:
Test case result adjusted after fixing bug#56271.
mysql-test/r/select.result:
A test case result adjusted after fixing bug#56271.
mysql-test/r/strict.result:
Test case result adjusted after fixing bug#56271.
mysql-test/r/type_datetime.result:
Added a test case for the bug#56271.
mysql-test/t/strict.test:
Test case adjusted after fixing bug#56271.
mysql-test/t/type_datetime.test:
Added a test case for the bug#56271.
sql/item_timefunc.cc:
Bug#56271: Wrong comparison result with STR_TO_DATE function
val_int and result_as_longlong methods were added to the Item_func_str_to_date
class.
Item_func_str_to_date::get_date now throws the ER_WRONG_VALUE_FOR_TYPE warning
on incorrect value.
sql/item_timefunc.h:
Bug#56271: Wrong comparison result with STR_TO_DATE function
val_int and result_as_longlong methods were added to the Item_func_str_to_date
class.
Original changeset:
------------------------------------------------------------
revno: 3197
revision-id: alik@sun.com-20100831135426-h5a4s2w6ih1d8q2x
parent: magnus.blaudd@sun.com-20100830120632-u3xzy002mdwueli8
committer: Alexander Nozdrin <alik@sun.com>
branch nick: mysql-5.5-bugfixing
timestamp: Tue 2010-08-31 17:54:26 +0400
message:
Bug#55980 Character sets: supplementary character _bin ordering is wrong
Problem:
- ORDER BY for utf8mb4_bin, utf16_bin and utf32_bin returned
results in a wrong order, because old functions
(supporting only BMP range) were used to handle these collations.
- Additionally, utf16_bin did not sort supplementary characters
between U+D700 and U+E000, as WL#1213 specification specified.
------------------------------------------------------------
Problem:
- ORDER BY for utf8mb4_bin, utf16_bin and utf32_bin returned
results in a wrong order, because old functions
(supporting only BMP range) were used to handle these collations.
- Additionally, utf16_bin did not sort supplementary characters
between U+D700 and U+E000, as WL#1213 specification specified.
include/m_ctype.h:
Adding prototypes.
mysql-test/include/ctype_filesort2.inc:
Adding a new shared test file.
mysql-test/t/ctype_utf8mb4.test:
Adding tests.
strings/ctype-ucs2.c:
- Fixing my_strncoll[sp]_utf16_bin to compare
binary representation instead of code points,
to make columns with indexes sort correct.
- Fixing my_collation_handler_utf32_bin and
my_collation_handler_utf16_bin to use new
functions.
strings/ctype-utf8.c:
- Adding my_strnxfrm[len]_unicode_fill_bin()
to handle utf8mb4_bin, utf16_bin and utf32_bin,
using 3 bytes per weight.
This function also performs special reordering in case of utf16_bin.
- Fixing my_collation_utf8mb4_bin handler to use the
new function.
------------------------------------------------------------
revno: 3124
revision-id: dlenev@mysql.com-20100831090419-rzr5ktekby2gspm1
parent: alik@sun.com-20100827083901-x4wvtc10u9p7gcs9
committer: Dmitry Lenev <dlenev@mysql.com>
branch nick: mysql-5.5-rt-56137
timestamp: Tue 2010-08-31 13:04:19 +0400
message:
Bug #56137 "Assertion `thd->lock == 0' failed on upgrading
from 5.1.50 to 5.5.6".
Debug builds of the server aborted due to an assertion
failure when DROP DATABASE statement was run on an
installation which had outdated or corrupt mysql.proc table.
Particularly this affected the mysql_upgrade tool which is
run as part of 5.1 to 5.5 upgrade.
The problem was that sp_drop_db_routines(), which was invoked
during dropping of the database, could have returned without
closing and unlocking mysql.proc table in cases when this
table was not up-to-date with the current server. As a result
further attempt to open and lock the mysql.event table, which
was necessary to complete dropping of the database, ended up
with an assert.
This patch solves this problem by ensuring that
sp_drop_db_routines() always closes mysql.proc table and
releases metadata locks on it. This is achieved by changing
open_proc_table_for_update() function to close tables and
release metadata locks acquired by it in case of failure.
This step also makes behavior of the latter function
consistent with behavior of open_proc_table_for_read()/
open_and_lock_tables().
Test case for this bug was added to sp-destruct.test.
------------------------------------------------------------
from 5.1.50 to 5.5.6".
Debug builds of the server aborted due to an assertion
failure when DROP DATABASE statement was run on an
installation which had outdated or corrupt mysql.proc table.
Particularly this affected the mysql_upgrade tool which is
run as part of 5.1 to 5.5 upgrade.
The problem was that sp_drop_db_routines(), which was invoked
during dropping of the database, could have returned without
closing and unlocking mysql.proc table in cases when this
table was not up-to-date with the current server. As a result
further attempt to open and lock the mysql.event table, which
was necessary to complete dropping of the database, ended up
with an assert.
This patch solves this problem by ensuring that
sp_drop_db_routines() always closes mysql.proc table and
releases metadata locks on it. This is achieved by changing
open_proc_table_for_update() function to close tables and
release metadata locks acquired by it in case of failure.
This step also makes behavior of the latter function
consistent with behavior of open_proc_table_for_read()/
open_and_lock_tables().
Test case for this bug was added to sp-destruct.test.
"Access compatibility" syntax
The "wild" "DELETE FROM table_name.* ... USING ..." syntax
for multi-table DELETE statements is documented but it was
lost in the fix for the bug 30234.
The table_ident_opt_wild parser rule has been added
to restore the lost syntax.
mysql-test/r/delete.result:
Test case for bug #53034.
mysql-test/t/delete.test:
Test case for bug #53034.
sql/sql_yacc.yy:
Bug #53034: Multiple-table DELETE statements not accepting
"Access compatibility" syntax
The table_ident_opt_wild parser rule has been added
to restore the lost syntax.
Note: simple extending of table_ident with opt_wild in
the table_alias_ref rule is not acceptable, because
a) it adds one conflict more and b) this conflict resolves
in the inappropriate way.
It was hard to understand what the error really meant.
The error checking in partitioning is done in several different
parts during the execution of a query which can make it
hard to return useful errors.
Added a new error for bad VALUES part in the per PARTITION clause.
Using the more verbose error that a column is not allowed in
the partitioning function instead of just that the function is
not allowed.
mysql-test/r/partition.result:
changed error to be more specific
mysql-test/r/partition_error.result:
updated result
mysql-test/std_data/parts/t1TIMESTAMP.frm:
.frm file of CREATE TABLE t1 (a TIMESTAMP) PARTITION BY HASH(TO_DAYS(a));
mysql-test/t/partition.test:
changed error to be more specific
mysql-test/t/partition_error.test:
Added test (also for verifying behaviour of previously
created tables which is no longer allowed).
Updated expected errors in other places
sql/partition_info.cc:
Added function report_part_expr_error to
be able to return a more specific error.
Renamed fix_func_partition to fix_partition_values
since the function really fixes/checks the VALUES clause.
sql/partition_info.h:
removed part_result_type, since it was unused.
renamed fix_funk_partition->fix_partition_values
added report_part_expr_error
sql/share/errmsg-utf8.txt:
Added a more specific error.
sql/sql_partition.cc:
made use of report_part_expr_error to get a more specific error.
sql/sql_yacc.yy:
Changed error message to be more specific. And return an other error code.
Check for number of line strings in the incoming polygon data (wkb) and
for number of points in the incoming linestring wkb.
mysql-test/r/gis.result:
Fix for bug #51875: crash when loading data into geometry function polyfromwkb
- test result.
mysql-test/t/gis.test:
Fix for bug #51875: crash when loading data into geometry function polyfromwkb
- test case.
sql/spatial.cc:
Fix for bug #51875: crash when loading data into geometry function polyfromwkb
- creating a polygon from wkb check for number of line strings,
- creating a linestring from wkb check for number of line points.
== MYSQL_TYPE_LONGLONG
A MIN/MAX() function with a subquery as its argument could lead
to a debug assertion on debug builds or wrong data on release
ones.
The problem was a combination of the following factors:
- Item_sum_hybrid::fix_fields() might use the argument
(args[0]) to calculate 'hybrid_field_type' which was later used
to decide how the data should be sent to the client.
- Item_sum::make_field() might use the argument again to
calculate the field's type when sending result set metadata to
the client.
- The argument could be changed in between these two calls via
Item::set_arg() leading to inconsistent metadata being
reported.
Here is what was happening for the bug's test case:
1. Item_sum_hybrid::fix_fields() calculates hybrid_field_type
as MYSQL_TYPE_LONGLONG based on args[0] which is an
Item::SUBSELECT_ITEM at that time.
2. A temporary table is created to execute the
query. create_tmp_field_from_item() creates a Field_long object
according to the subselect's max_length.
3. The subselect item in Item_sum_hybrid is replaced by the
Item_field object referencing the newly created Field_long.
4. Item_sum::make_field() rightfully returns the
MYSQL_TYPE_LONG type when calculating the result set metadata.
5. When sending the actual data, Item::send() relies on the
virtual field_type() function which in our case returns
previously calculated hybrid_field_type == MYSQL_TYPE_LONGLONG.
It looks like the only solution is to never refer to the
argument's metadata after the result metadata has been
calculated in fix_fields(), since the argument itself may be
different by then. In this sense, Item_sum::make_field() should
never be used, because it may rely on the argument's metadata
and is only called after fix_fields(). The "default"
implementation in Item::make_field() should be used instead as
it relies only on field_type(), but not on the argument's type.
Fixed by removing Item_sum::make_field() so that the superclass
implementation Item::make_field() is always used.
mysql-test/r/func_group.result:
Added a test case for bug #54465.
mysql-test/t/func_group.test:
Added a test case for bug #54465.
sql/item_sum.cc:
Removed Item_sum::make_field() so that the superclass
implementation Item::make_field() is always used.
sql/item_sum.h:
Removed Item_sum::make_field() so that the superclass
implementation Item::make_field() is always used.
Bug#46754: 'rows' field doesn't reflect partition pruning
Update of test results after fixing the above bugs.
(fix in separate commit).
mysql-test/r/partition.result:
Updated test result after fixing bugs 46754 and 53806
mysql-test/r/partition_hash.result:
Updated test result after fixing bugs 46754 and 53806
mysql-test/r/partition_innodb.result:
Updated test result after fixing bugs 46754 and 53806
mysql-test/r/partition_range.result:
Updated test result after fixing bugs 46754 and 53806
mysql-test/suite/parts/r/partition_alter3_innodb.result:
Updated test result after fixing bugs 46754 and 53806
mysql-test/suite/parts/r/partition_alter3_myisam.result:
Updated test result after fixing bugs 46754 and 53806
Bug#46754: 'rows' field doesn't reflect partition pruning
The EXPLAIN's result in 'rows' field
was evaluated to number of rows when the table was opened
(not from the table cache) and only the partitions left
after pruning was updated with its correct number
of rows.
The evaluation of the 'rows' field was using handler::records()
which is a potentially expensive call, and ignores the partitioning
pruning.
The fix was to use the handlers stats.records after updating it
with ::info(HA_STATUS_VARIABLE) instead.
mysql-test/r/partition_pruning.result:
updated result
mysql-test/t/partition_pruning.test:
Added test.
sql/sql_select.cc:
Use ::info + stats.records instead of ::records().
Problem: trailing spaces were stripped using 8-bit code,
so the truncation result length was incorrect, which led
to an assertion failure.
Fix: using multi-byte safe code.
called twice in a row
Queries with nested joins could cause an infinite loop in the
server when used from SP/PS.
When flattening nested joins, simplify_joins() tracks if the
name resolution list needs to be updated by setting
fix_name_res to TRUE if the current loop iteration has done any
transformations to the join table list. The problem was that
the flag was not reset before the next loop iteration leading
to unnecessary "fixing" of the name resolution list which in
turn could lead to a loop (i.e. circularly-linked part) in that
list. This was causing problems on subsequent execution when
used together with stored procedures or prepared statements.
Fixed by making sure fix_name_res is reset on every loop
iteration.
mysql-test/r/join.result:
Added a test case for bug #53544.
mysql-test/t/join.test:
Added a test case for bug #53544.
sql/sql_select.cc:
Make sure fix_name_res is reset on every loop iteration.
Before this fix, the ha_read_last_count status variable was defined and
updated internally, for never exposed as a system variable.
This fix exposes the system variable as "Handler_read_last",
for completness of the Handler_read_* system variables interface.
Adjusted tests results accordingly.
file .\dtoa.c
The assertion failure was correct because the 'width' argument
of my_gcvt() has the signed integer type, whereas the unsigned
value UINT_MAX32 was being passed by the caller
(Field_double::val_str()) leading to a negative width in
my_gcvt().
The following chain of problems was found by further analysis:
1. The display width for a floating point number is calculated
in Field_double::val_str() as either field_length or the
maximum possible length of string representation of a floating
point number, whichever is greater. Since in the bug's test
case field_length is UINT_MAX32, we get the same value as the
display width. This does not make any sense because for numeric
values field_length only matters for ZEROFILL columns,
otherwise it does not make sense to allocate that much memory
just to print a number. Field_float::val_str() has a similar
problem.
2. Even if the above wasn't the case, we would still get a
crash on a slightly different test case when trying to allocate
UINT_MAX32 bytes with String::alloc() because the latter does
not handle such large input values correctly due to alignment
overflows.
3. Even when String::alloc() is fixed to return an error when
an alignment overflow occurs, there is still a problem because
almost no callers check its return value, and
Field_double::val_str() is not an exception (same for
Field_float::val_str()).
4. Even if all of the above wasn't the case, creating a
Field_double object with UINT_MAX32 as its field_length does
not make much sense either, since the .frm code limits it to
MAX_FIELD_CHARLENGTH (255) bytes. Such a beast can only be
created by create_tmp_field_from_item() from an Item with
REAL_RESULT as its result_type() and UINT_MAX32 as its
max_length.
5. For the bug's test case, the above condition (REAL_RESULT
Item with max_length = UINT_MAX32) was a result of
Item_func_if::fix_length_and_dec() "shortcutting" aggregation
of argument types when one of the arguments was a constant
NULL. In this case, the attributes of the aggregated type were
simply copied from the other, non-NULL argument, but max_length
was still calculated as per the general, non-shortcut case, by
choosing the greatest of argument's max_length, which is
obviously not correct.
The patch addresses all of the above problems, even though
fixing the assertion failure for the particular test case would
require only a subset of the above problems to be solved.
client/sql_string.cc:
Return an error in case of uint32 overflow in alignment.
Also assert there was no overflow to help find such conditions
in debug builds, since almost no callers check the return value
of String::alloc().
mysql-test/r/func_if.result:
Add a test case for bug #55077.
mysql-test/t/func_if.test:
Add a test case for bug #55077.
sql/field.cc:
- Assert we don't operate with fields wider than 255
(MAX_FIELD_CHARLENGTH) bytes in both Field_float and
Field_double.
- Don't take field_length into account when calculating the
output buffer length.
- Check the return value of String::alloc()
sql/item_cmpfunc.cc:
When shortcutting type aggregation, don't take the NULL
argument's max_length into account.
sql/sql_string.cc:
Return an error in case of uint32 overflow in alignment.
Also assert there was no overflow to help find such conditions
in debug builds, since almost no callers check the return value
of String::alloc().
with two connections doing LOCK TABLE+INSERT DELAYED".
Disabled --ps-protocol for this part of the test as INSERT
DELAYED simply doesn't work with it under LOCK TABLES.
Queries involving predicates of the form "const NOT BETWEEN
not_indexed_column AND indexed_column" could return wrong data
due to incorrect handling by the range optimizer.
For "c NOT BETWEEN f1 AND f2" predicates, get_mm_tree()
produces a disjunction of the SEL_ARG trees for "f1 > c" and
"f2 < c". If one of the trees is empty (i.e. one of the
arguments is not sargable) the resulting tree should be empty
as well, since the whole expression in this case is not
sargable.
The above logic is implemented in get_mm_tree() as follows. The
initial state of the resulting tree is NULL (aka empty). We
then iterate through arguments and compute the corresponding
SEL_ARG tree (either "f1 > c" or "f2 < c"). If the resulting
tree is NULL, it is simply replaced by the generated
tree. Otherwise it is replaced by a disjunction of itself and
the generated tree. The obvious flaw in this implementation is
that if the first argument is not sargable and thus produces a
NULL tree, the resulting tree will simply be replaced by the
tree for the second argument. As a result, "c NOT BETWEEN f1
AND f2" will end up as just "f2 < c".
Fixed by adding a check so that when the first argument
produces an empty tree for the NOT BETWEEN case, the loop is
aborted with an empty tree as a result. The whole idea of using
a loop for 2 arguments does not make much sense, but it was
probably used to avoid code duplication for several BETWEEN
variants.
within query
The server could crash after materializing a derived table
which requires a temporary table for grouping.
When destroying the temporary table used to execute a query for
a derived table, JOIN::destroy() did not clean up Item_fields
pointing to fields in the temporary table. This led to
dereferencing a dangling pointer when printing out the items
tree later in the outer SELECT.
The solution is an addendum to the patch for bug37362: in
addition to cleaning up items in tmp_all_fields3, do the same
for items in tmp_all_fields1, since now we have an example
where this is necessary.
mysql-test/r/join.result:
Added test cases for bug#55568 and a duplicate bug #54468.
mysql-test/t/join.test:
Added test cases for bug#55568 and a duplicate bug #54468.
sql/field.cc:
Make sure field->table_name is not set to NULL in
Field::make_field() to avoid assertion failure in
Item_field::make_field() after cleaning up items
(the assertion fired in udf.test when running
the test suite with the patch applied).
sql/sql_select.cc:
In addition to cleaning up items in tmp_all_fields3, do the
same for items in tmp_all_fields1.
Introduce a new helper function to avoid code duplication.
sql/sql_select.h:
Introduce a new helper function to avoid code duplication in
JOIN::destroy().
The Item_cache_datetime::val_str function wasn't taking into account that time
could be negative. This led to failed assertion.
Now Item_cache_datetime::val_str correctly converts negative time values
from integer to string representation.
mysql-test/r/func_group.result:
Added a test case for the bug#56120.
mysql-test/t/func_group.test:
Added a test case for the bug#56120.
sql/item.cc:
Bug#56120: Failed assertion on MIX/MAX on negative time value
Now Item_cache_datetime::val_str correctly converts negative time values
from integer to string representation.
The problem was that deadlocks involving INSERT DELAYED were not detected.
The reason for this is that two threads are involved in INSERT DELAYED:
the connection thread and the handler thread. The connection thread would
wait while the handler thread acquired locks and opened the table.
In essence, this adds an edge to the wait-for-graph between the
connection thread and the handler thread that the deadlock detector is
unaware of. Therefore many deadlocks involving INSERT DELAYED were not
detected.
This patch fixes the problem by having the connection thread acquire the
metadata lock the table before starting the handler thread. This allows the
deadlock detector to detect any possible deadlocks resulting from trying to
acquire a metadata lock the table. If a metadata lock is successfully acquired,
the handler thread is started and given a copy of the ticket representing the
metadata lock. When the handler thread then tries to lock and open the table,
it will find that it already has the metadata lock and therefore not acquire
any new metadata locks.
Test cases added to delayed.test.
The ALTER PARTITION and SELECT seemed to be deadlocked
when having innodb_thread_concurrency = 1.
Problem was that there was unreleased latches
in the ALTER PARTITION thread which was needed
by the SELECT thread to be able to continue.
Solution was to release the latches by commit
before requesting upgrade to exclusive MDL lock.
Updated according to reviewers comments (3).
mysql-test/r/partition_innodb.result:
updated test result
mysql-test/t/partition_innodb.test:
added test
sql/sql_partition.cc:
Moved implicit commit into mysql_change_partition
so that if latches are taken, they are always released
before waiting on exclusive lock.
sql/sql_table.cc:
refactored the code to prepare and commit
around copy_data_between_tables, to be able
to reuse it in mysql_change_partitions
sql/sql_table.h:
exporting mysql_trans_prepare/commit_alter_copy_data
Problems:
- dot character was always printed as decimal point
instead of localized decimal point for short
numbers without thousands
- Item_func_format::val_str always returned values in ASCII
format,
regargless of @@character_set_connection, which in case of utf32
led to crash in debug build, or to incorrect values in release build.
Fix:
- Adding a piece of code to replace dot character to
localized decimal point in short numbers.
- Changing parent class for Item_func_format to
Item_str_ascii_func, because its val_str() implementation is heavily ASCII oriented.
on CREATE TABLE .. SELECT I_S.PART
This assert was triggered if an InnoDB table was created using
CREATE TABLE ... AS SELECT where the query used an I_S table, and
a view existed in the database. It would also be triggered for
any statement changing an InnoDB table (e.g. INSERT, UPDATE, DELETE)
which had a subquery referencing an I_S table.
The assert was triggered if open_normal_and_derived_tables() failed
and a statement transaction had been started. This will usually not
happen as tables are opened before a statement transaction is started.
However, e.g. CREATE TABLE ... AS SELECT starts a transaction in order
to insert tuples into the new table. And if the subquery references
an I_S table, all current tables and views can be opened in order to
fill the I_S table on the fly. If a view is discovered, open will fail
as it is instructed to open tables only (OPEN_TABLE_ONLY). This would
cause the assert to be triggered.
The assert was added in the patch for Bug#52044 and was therefore
not in any released versions of the server.
This patch fixes the problem by adjusting the assert to take into
consideration the possibility of tables being opened as part of
an I_S query. This is similar to what is already done for
close_tables_for_reopen().
Test case added to information_schema_inno.test.
temp table
This patch introduces two key changes in the replication's behavior.
Firstly, it reverts part of BUG#51894 which puts any update to temporary tables
into the trx-cache. Now, updates to temporary tables are handled according to
the type of their engines as a regular table.
Secondly, an unsafe mixed statement, (i.e. a statement that access transactional
table as well non-transactional or temporary table, and writes to any of them),
are written into the trx-cache in order to minimize errors in the execution when
the statement logging format is in use.
Such changes has a direct impact on which statements are classified as unsafe
statements and thus part of BUG#53259 is reverted.
Problem: a few functions did not calculate their max_length correctly.
This is an after-fix for WL#2649 Number-to-string conversions".
Fix: changing the buggy functions to calculate max_length
using fix_char_length() introduced in WL#2649,
instead of setting max_length directly
mysql-test/include/ctype_numconv.inc
Adding new tests
mysql-test/r/ctype_binary.result
Adding new tests
mysql-test/r/ctype_cp1251.result
Adding new tests
mysql-test/r/ctype_latin1.result
Adding new tests
mysql-test/r/ctype_ucs.result
Adding new tests
mysql-test/r/ctype_utf8.result
Adding new tests
mysql-test/t/ctype_utf8.test
Including ctype_numconv
sql/item.h
- Introducing new method fix_char_length_ulonglong(),
for the cases when length is potentially greater
than UINT_MAX32. This method removes a few
instances of duplicate code, e.g. in item_strfunc.cc.
- Setting collation in Item_copy properly. This change
fixes wrong metadata on client side in some cases, when
"binary" instead of the real character set was reported.
sql/item_cmpfunc.cc
- Using fix_char_length() and max_char_length() methods,
instead of direct access to max_length, to calculate
item length properly.
- Moving count_only_length() in COALESCE after
agg_arg_charsets_for_string_result(). The old
order was incorrect and led to wrong length
calucation in case of multi-byte character sets.
sql/item_func.cc
Fixing that count_only_length() didn't work
properly for multi-byte character sets.
Using fix_char_length() and max_char_length()
instead of direct access to max_length.
sql/item_strfunc.cc
- Using fix_char_length(), fix_char_length_ulonglong(),
max_char_length() instead of direct access to max_length.
- Removing wierd condition: "if (collation.collation->mbmaxlen > 0)",
which is never FALSE.
#ifdef THREAD removed from mysql.cc.
No reason was found for this limitation to persist.
per-file comments:
client/mysql.cc
Bug#54466 client 5.5 built from source lacks "pager" support
now we have USE_POPEN always if not __WIN__
mysql-test/r/mysql.result
Bug#54466 client 5.5 built from source lacks "pager" support
result updated.
mysql-test/t/mysql.test
Bug#54466 client 5.5 built from source lacks "pager" support
test case added.
Problem: Item_func_hex::val_str() returned data in ASCII format,
which did not match collation.collation pointing to my_charset_utf32_general_ci.
Fix: changing parent class of Item_func_hex to Item_str_ascii_func,
as val_str() implementation is heavily ASCII-oriented.
mysql-test/r/ctype_utf32.result
mysql-test/t/ctype_utf32.test
Adding test case
sql/item_strfunc.cc
sql/item_strfunc.h
- Changing parent class to Item_str_ascii_func
- Clean-up in Item_func_hex::fix_length_and_dec()
Using fix_char_length() instead of setting max_length directly.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#47132, BUG#47442, BUG49494, BUG#23992 and BUG#48814 will disappear
automatically after the this patch.
BUG#55617 is fixed by this patch too.
This is the 5.5 part.
It implements:
- 'CREATE TABLE IF NOT EXISTS ... SELECT' statement will not insert
anything and binlog anything if the table already exists.
It only generate a warning that table already exists.
- A couple of test cases for the behavior changing.
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#55474, BUG#55499, BUG#55598, BUG#55616 and BUG#55777 are fixed
in this patch too.
This is the 5.1 part.
It implements:
- if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
- Insert nothing and binlog nothing on master if the existing object
is a view. It only generates a warning that table already exists.
mysql-test/r/trigger.result:
Ather this patch, 'CREATE TABLE IF NOT EXISTS ... SELECT' will not
insert anything if the creating table already exists and is a view.
sql/sql_class.h:
Declare virtual function write_to_binlog() for select_insert.
It's used to binlog 'create select'
sql/sql_insert.cc:
Implement write_to_binlog();
Use write_to_binlog() instead of binlog_query() to binlog the statement.
if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
sql/sql_lex.h:
Declare create_select_start_with_brace and create_select_pos.
They are helpful for binlogging 'create select'
sql/sql_parse.cc:
Do nothing on master if the existing object is a view.
sql/sql_yacc.yy:
Record the relative postion of 'SELECT' in the 'CREATE ...SELECT' statement.
Record whether there is a '(' before the 'SELECT' clause.
Followup to vasil.dimov@oracle.com-20100817063430-inglmzgdtj95t29d
which didn't fully fix the test because the order of the returned
rows was different in embedded and non-embedded version. So the only
way to fix this is to add an ORDER BY clause.
locks on the table
Fixing the partitioning specifics after TRUNCATE TABLE in
bug-42643 was fixed.
Reorganize of code to decrease the size of the giant switch
in mysql_execute_command, and to prepare for future parser
reengineering. Moved code into Sql_statement objects.
Updated patch according to davi's review comments.
libmysqld/CMakeLists.txt:
Added new files.
libmysqld/Makefile.am:
Added new files.
mysql-test/r/not_partition.result:
now returning error on partitioning commands
if partitioning is not enabled.
mysql-test/r/partition_disabled.result:
There is no partition handlerton, so it cannot
find the specified engine in the .frm file.
mysql-test/r/partition_truncate.result:
Updated test results.
mysql-test/suite/parts/inc/partition_mgm.inc:
Added check that TRUNCATE PARTITION does not delete on failure.
mysql-test/suite/parts/r/partition_debug_sync_innodb.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc0_archive.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc1_archive.result:
updated results.
mysql-test/suite/parts/r/partition_mgm_lc2_archive.result:
updated results.
mysql-test/suite/parts/t/partition_debug_sync_innodb.test:
Test case for this bug.
mysql-test/t/not_partition.test:
Added check for TRUNCATE PARTITION without partitioning.
mysql-test/t/partition_truncate.test:
Added test of TRUNCATE PARTITION on non partitioned table.
sql/CMakeLists.txt:
Added new files.
sql/Makefile.am:
Added new files.
sql/datadict.cc:
Moved out the storage engine check into an own
function, including assert for lock.
sql/datadict.h:
added dd_frm_storage_engine.
sql/sql_alter_table.cc:
moved the code for SQLCOM_ALTER_TABLE in mysql_execute_command
into its own file, and using the Sql_statement object to
prepare for future parser reengineering.
sql/sql_alter_table.h:
Created Sql_statement object for ALTER TABLE.
sql/sql_lex.cc:
resetting m_stmt.
sql/sql_lex.h:
Temporary hack for forward declaration of enum_alter_table_change_level.
sql/sql_parse.cc:
Moved out ALTER/ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE
from the giant switch into their own Sql_statement
objects.
sql/sql_parse.h:
Exporting check_merge_table_access.
sql/sql_partition_admin.cc:
created Sql_statement for
ALTER TABLE t ANALYZE/CHECK/OPTIMIZE/REPAIR/TRUNCATE
PARTITION. To be able to reuse the TABLE equivalents.
sql/sql_partition_admin.h:
Added Sql_statement of partition admin statements.
sql/sql_table.cc:
Moved table maintenance code into sql_table_maintenance.cc
sql/sql_table.h:
Moved table maintenance code into sql_table_maintenance.h
exporting functions used by sql_table_maintenance.
sql/sql_table_maintenance.cc:
Moved table maintenance code from sql_table.cc
sql/sql_table_maintenance.h:
Sql_statement objects for ANALYZE/CHECK/OPTIMIZE/REPAIR TABLE.
Also declaring the keycache functions.
sql/sql_truncate.cc:
Moved code from SQLCOM_TRUNCATE in mysql_execute_command into
Truncate_statement::execute.
Added check for partitioned table on TRUNCATE PARTITION.
Moved locking fix for partitioned table into
Alter_table_truncate_partition::execute.
sql/sql_truncate.h:
Truncate_statement declaration (sub class of Sql_statement).
sql/sql_yacc.yy:
Using the new Sql_statment objects.
The bug was fixed by the patch for Bug 52044.
Add a test case.
mysql-test/r/flush.result:
Update results (Bug#52117)
mysql-test/t/flush.test:
Add a test case for Bug#52117 "Pending FLUSH TALBES <list> aborts
transactions unnecessarily"
variable assignments
The assert() that is firing is checking if expressions that can't be
null return a NULL when evaluated.
MAKEDATE() function can return NULL if the second argument is
less then or equal to 0. Thus its nullability depends not only on
the nullability of its arguments but also on their values.
Fixed by (overoptimistically) setting MAKEDATE() to be nullable
despite the nullability of its arguments.
Test added.
Had to update one test result to reflect the metadata change.
