Removed changes to the Item_func_between::fix_length_and_dec() made in the fix for bug#16377
query_cache.result:
Corrected a test case after removing a fix for bug#16377
A communication packet can also be a binlog event sent from the master to the slave.
To be sent by master dump and accepted by slave io thread both have to have
the value of max_allowed_packet bigger than one that client connection had.
In the patch there is the MAX possible replicatio header size estimation for events
in binlog that embedded user query. Only these events of query_log_event type, i.e
just plain queries, require attention.
0xFF is internal separator for SET|ENUM names.
If this symbol is present in SET|ENUM names then we replace it with
','(deprecated symbol for SET|ENUM names) during frm creation
and restore to 0xFF during frm opening
- Honor unsigned_flag in the corresponding functions
- Use compare_int_signed_unsigned()/compare_int_unsigned_signed() instead of explicit comparison in GREATEST() and LEAST()
VALUES() was considered a constant. This caused replacing
(or pre-calculating) it using uninitialized values before the actual
execution takes place.
Mark it as a non-constant (still not dependent of tables) to prevent
the pre-calculation.
Corrected test case after removal of fix for bug#16377
type_date.test:
Corrected test case after removal of fix for bug#16377
item_cmpfunc.cc:
Removed changes to the agg_cmp_type() made in the for bug#16377
1003: Incorrect table name
in multi-table DELETE the set of tables to delete from actually
references then tables in the other list, e.g:
DELETE alias_of_t1 FROM t1 alias_of_t1 WHERE ....
is a valid statement.
So we must turn off table name syntactical validity check for alias_of_t1
because it's not a table name (even if it looks like one).
In order to do that we add a special flag (TL_OPTION_ALIAS) to
disable the name checking for the aliases in multi-table DELETE.
Variable character_set_results can legally be NULL (for "no conversion.")
This could result in a NULL deref that crashed the server. Fixed.
(Although ran some additional precursory tests to see whether I could break
anything else, but no breakage so far.)
The problem was due to a prior fix for BUG 9676, which limited
the rows stored in a temporary table to the LIMIT clause. This
optimization is not applicable to non-group queries with aggregate
functions. The fix disables the optimization in this case.
The problem was that during DROP TEMPORARY TABLE we tried to acquire
the name lock, though temporary tables belongs to one connection, and
no race is possible.
The solution is to not use table name locking while executing
DROP TEMPORARY TABLE.
- Fix typo in Item_func_export_set::fix_length_and_dec() which caused character set aggregation to fail
- Remove default argument from last arg of agg_arg_charsets() function, to reduce potential errors
GROUP BY/DISTINCT pruning optimization must be done before ORDER BY
optimization because ORDER BY may be removed when GROUP BY/DISTINCT
sorts as a side effect, e.g. in
SELECT DISTINCT <non-key-col>,<pk> FROM t1
ORDER BY <non-key-col> DISTINCT
must be removed before ORDER BY as if done the other way around
it will remove both.
The problem was that the error handling was using a too-small buffer to
print the error message generated. We fix this by not using a buffer at
all, but by using fprintf() directly. There were also some problems with
the error handling in table dumping that was exposed by this fix that were
also corrected.
The crash was caused by invalid sequence of handler::** calls:
ha_smth->index_init();
ha_smth->index_next_same(); (2)
(2) is an invalid call as it was not preceeded by any 'scan setup' call
like index_first() or index_read(). The cause was that QUICK_SELECT::reset()
didn't "fully reset" the quick select- current QUICK_RANGE wasn't forgotten,
and quick select might attempt to continue reading the range, which would
result in the above mentioned invalid sequence of handler calls.
5.x versions are not affected by the bug - they already have the missing
"range=NULL" clause.
bug #18184 SELECT ... FOR UPDATE does not work..: New test case
ha_ndbcluster.h, ha_ndbcluster.cc, NdbConnection.hpp:
Fix for bug #21059 Server crashes on join query with large dataset with NDB tables: Releasing operation for each intermediate batch, before next call to trans->execute(NoCommit);
- if there are two character set definitions in the column declaration,
we replace the first one with the second one as we store both in the LEX->charset
slot. Add a separate slot to the LEX structure to store underscore charset.
- convert default values to the column charset of STRING, VARSTRING fields
if necessary as well.
Make the encryption functions MD5(), SHA1() and ENCRYPT() return binary results.
Make MAKE_SET() and EXPORT_SET() use the correct character set for their default separator strings.
didn't work as expected: collation_server was set not to xxx,
but to the default collation of character set "yyy".
With different argument order it worked as expected:
mysqld --character-set-server=yyy --collation-server=yyy
Fix:
initializate default_collation_name to 0
when processing --character-set-server
only if --collation-server has not been specified
in command line.
Treat queries with no FROM and aggregate functions as normal queries,
so the aggregate function get correctly calculated as if there is 1 row.
This means that they will be considered to have one row, so COUNT(*) will return
1 instead of 0. Other aggregates will behave in compatible manner.
time_format() claimed %H and %k would return at most two digits
(hours 0-23), but this coincided neither with actual behaviour
nor with docs. this is not visible in simple queries; forcing
a temp-table is probably the easiest way to see this. adjusted
the return-length appropriately; the alternative would be to
adjust the docs to say that behaviour for > 99 hours is undefined.
---
Bug#19844: time_format in Union truncates values
time_format() claimed %H and %k would return at most two digits
(hours 0-23), but this coincided neither with actual behaviour
nor with docs. this is not visible in simple queries; forcing
a temp-table is probably the easiest way to see this. adjusted
the return-length appropriately; the alternative would be to
adjust the docs to say that behaviour for > 99 hours is undefined.
privileges
This problem is 4.1 specific. It doesn't affect 4.0 and was fixed
in 5.x before.
Having any mysql user who is allowed to issue multi table update
statement and any column/table grants, allows this user to update
any table on a server (mysql grant tables are not exception).
check_grant() accepts number of tables (in table list) to be checked
in 5-th param. While checking grants for multi table update, number
of tables must be 1. It must never be 0 (actually we have
DBUG_ASSERT(number > 0) in 5.x in grant_check() function).
When processing aggregate functions all tables values are reset
to NULLs at the end of each group.
When doing that if there are no rows found for a group
the const tables must not be reset as they are not recalculated
by do_select()/sub_select() for each group.
When optimizing conditions like 'a = <some_val> OR a IS NULL' so that they're
united into a single condition on the key and checked together the server must
check which value is the NULL value in a correct way : not only using ->is_null
but also check if the expression doesn't depend on any tables referenced in the
current statement.
This additional check must be performed because that optimization takes place
before the actual execution of the statement, so if the field was initialized
to NULL from a previous statement the optimization would be applied incorrectly.
The problem was in that opt_sum_query() replaced MIN/MAX functions
with the corresponding constant found in a key, but due to imprecise
representation of float numbers, when evaluating the where clause,
this comparison failed.
When MIN/MAX optimization detects that all tables can be removed,
also remove all conjuncts in a where clause that refer to these
tables. As a result of this fix, these conditions are not evaluated
twice, and in the case of float number comparisons we do not discard
result rows due to imprecise float representation.
As a side-effect this fix also corrects an unnoticed problem in
bug 12882.
LIKE craashed with a pattern having letters in the range 128..255
(e.g. A WITH ACUTE or C WITH CARON) because of wrong cast from
signed char to unsigned int.
for class Item_func_trim.
For 4.1 it caused wrong output for EXPLAIN EXTENDED commands
if expressions with the TRIM function of two arguments were used.
For 5.0 it caused an error message when trying to select
from a view with the TRIM function of two arguments.
This unexpected error message was due to the fact that the
print method for the class Item_func_trim was inherited from
the class Item_func. Yet the TRIM function does not take a list
of its arguments. Rather it takes the arguments in the form:
[{BOTH | LEADING | TRAILING} [remstr] FROM] str) |
[remstr FROM] str
do not look for client-specific commands while inside a multi-line comment.
we will allow multi-comments pretty much anywhere within SQL-statements,
but client-specific commands (help, use, print, ...) must be the first token
in the input.
* don't use join cache when the incoming data set is already ordered
for ORDER BY
This choice must be made because join cache will effectively
reverse the join order and the results will be sorted by the index
of the table that uses join cache.
may return a wrong result.
An Item_sum_hybrid object has the was_values flag which indicates whether any
values were added to the sum function. By default it is set to true and reset
to false on any no_rows_in_result() call. This method is called only in
return_zero_rows() function. An ALL/ANY subquery can be optimized by MIN/MAX
optimization. The was_values flag is used to indicate whether the subquery
has returned at least one row. This bug occurs because return_zero_rows() is
called only when we know that the select will return zero rows before
starting any scans but often such information is not known.
In the reported case the return_zero_rows() function is not called and
the was_values flag is not reset to false and yet the subquery return no rows
Item_func_not_all and Item_func_nop_all functions return a wrong
comparison result.
The end_send_group() function now calls no_rows_in_result() for each item
in the fields_list if there is no rows were found for the (sub)query.
The problem is that the author used the wrong function to send a warning to the
user about truncation of data. push_warning() takes a constant string and
push_warning_printf() takes a format and variable arguments to fill it.
Since the string we were complaining about contains percent characters, the
printf() code interprets the "%Y" et c. that the user sends. That's wrong, and
often causes a crash, especially if the date mentions seconds, "%s".
A alternate fix would be to use push_warning_printf(..., "%s", warn_buff) .
The ALL/ANY subqueries are the subject of MIN/MAX optimization. The matter
of this optimization is to embed MIN() or MAX() function into the subquery
in order to get only one row by which we can tell whether the expression
with ALL/ANY subquery is true or false.
But when it is applied to a subquery like 'select a_constant' the reported bug
occurs. As no tables are specified in the subquery the do_select() function
isn't called for the optimized subquery and thus no values have been added
to a MIN()/MAX() function and it returns NULL instead of a_constant.
This leads to a wrong query result.
For the subquery like 'select a_constant' there is no reason to apply
MIN/MAX optimization because the subquery anyway will return at most one row.
Thus the Item_maxmin_subselect class is more appropriate for handling such
subqueries.
The Item_in_subselect::single_value_transformer() function now checks
whether tables are specified for the subquery. If no then this subselect is
handled like a UNION using an Item_maxmin_subselect object.
To make MySQL compatible with some ODBC applications, you can find
the AUTO_INCREMENT value for the last inserted row with the following query:
SELECT * FROM tbl_name WHERE auto_col IS NULL.
This is done with a special code that replaces 'auto_col IS NULL' with
'auto_col = LAST_INSERT_ID'.
However this also resets the LAST_INSERT_ID to 0 as it uses it for a flag
so as to ensure that only the first SELECT ... WHERE auto_col IS NULL
after an INSERT has this special behaviour.
In order to avoid resetting the LAST_INSERT_ID a special flag is introduced
in the THD class. This flag is used to restrict the second and subsequent
SELECTs instead of LAST_INSERT_ID.
dropping/creating tables".
The bug could lead to a crash when multi-delete statements were
prepared and used with temporary tables.
The bug was caused by lack of clean-up of multi-delete tables before
re-execution of a prepared statement. In a statement like
DELETE t1 FROM t1, t2 WHERE ... the first table list (t1) is
moved to lex->auxilliary_table_list and excluded from lex->query_tables
or select_lex->tables. Thus it was unaccessible to reinit_stmt_before_use
and not cleaned up before re-execution of a prepared statement.
The implementation of the method Item_func_reverse::val_str
for the REVERSE function modified the argument of the function.
This led to wrong results for expressions that contained
REVERSE(ref) if ref occurred somewhere else in the expressions.
"temporary table with data directory option fails"
myisam should not use user-specified table name when creating
temporary tables and use generated connection specific real name.
Test included.
CHECK TABLE could complain about a fully intact spatial index.
A wrong comparison operator was used for table checking.
The result was that it checked for non-matching spatial keys.
This succeeded if at least two different keys were present,
but failed if only the matching key was present.
I fixed the key comparison.
Produce a warning if DATA/INDEX DIRECTORY is specified in
ALTER TABLE statement.
Ignoring of these options is documented in the symbolic links
section of the manual.
'SELECT DISTINCT a,b FROM t1' should not use temp table if there is unique
index (or primary key) on a.
There are a number of other similar cases that can be calculated without the
use of a temp table : multi-part unique indexes, primary keys or using GROUP BY
instead of DISTINCT.
When a GROUP BY/DISTINCT clause contains all key parts of a unique
index, then it is guaranteed that the fields of the clause will be
unique, therefore we can optimize away GROUP BY/DISTINCT altogether.
This optimization has two effects:
* there is no need to create a temporary table to compute the
GROUP/DISTINCT operation (or the temporary table will be smaller if only GROUP
is removed and DISTINCT stays or if DISTINCT is removed and GROUP BY stays)
* this causes the statement in effect to become updatable in Connector/Java
because the result set columns will be direct reference to the primary key of
the table (instead to the temporary table that it currently references).
Implemented a check that will optimize away GROUP BY/DISTINCT for queries like
the above.
Currently it will work only for single non-constant table in the FROM clause.
An UNIQUE KEY consisting of NOT NULL columns
was displayed as PRIMARY KEY in "DESC t1".
According to the code, that was intentional
behaviour for some reasons unknown to me.
This code was written before bitkeeper time,
so I cannot check who and why made this.
After discussing on dev-public, a decision
was made to remove this code
This was another manifestation of the problems fixed in the
patch for bug 16674.
Wrong calculation of length of the search prefix in the pattern
string led here to a wrong result set for a query in 4.1.
The bug could be demonstrated for any multi-byte character set.
Server crashed in some cases when a query required a MIN/MAX
agrregation for a 'ucs2' field.
In these cases the aggregation caused calls of the function
update_tmptable_sum_func that indirectly invoked
the method Item_sum_hybrid::min_max_update_str_field()
containing a call to strip_sp for a ucs2 character set.
The latter led directly to the crash as it used my_isspace
undefined for the ucs2 character set.
Actually the call of strip_sp is not needed at all in this
situation and has been removed by the fix.
The AsBinary function returns VARCHAR data type with binary collation.
It can cause problem for clients that treat that kind of data as
different from BLOB type.
So now AsBinary returns BLOB.
This bug in Field_string::cmp resulted in a wrong comparison
with keys in partial indexes over multi-byte character fields.
Given field a is declared as a varchar(16) collate utf8_unicode_ci
INDEX(a(4)) gives us an example of such an index.
Wrong key comparisons could lead to wrong result sets if
the selected query execution plan used a range scan by
a partial index over a utf8 character field.
This also caused wrong results in many other cases.
functions in queries
Using MAX()/MIN() on table with disabled indexes (by ALTER TABLE)
results in error 124 (wrong index) from storage engine.
The problem was that optimizer use disabled index to optimize
MAX()/MIN(). Normally it must skip disabled index and perform
table scan.
This patch skips disabled indexes for min/max optimization.
The length of the prefix of the pattern string in the LIKE predicate that
determined the index range to be scanned was calculated incorrectly for
multi-byte character sets.
As a result of this in 4. 1 the the scanned range was wider then necessary
if the prefix contained not only one-byte characters.
In 5.0 additionally it caused missing some rows from the result set.
Added test case for bug#18759 Incorrect string to numeric conversion.
select.test:
Added test case for bug#18759 Incorrect string to numeric conversion.
item_cmpfunc.cc:
Cleanup after fix for bug#18360 removal
tables
Currently in INSERT ... SELECT ... LIMIT ... the compiler uses a
temporary table to store the results of SELECT ... LIMIT .. and then
uses that table as a source for INSERT. The problem is that in some cases
it actually skips the LIMIT clause in doing that and materializes the
whole SELECT result set regardless of the LIMIT.
This fix is limiting the process of filling up the temp table with only
that much rows that will be actually used by propagating the LIMIT value.
Certain updates of table joined to self results in unexpected
behavior.
The problem was that record cache was mistakenly enabled for
self-joined table updates. Normally record cache must be disabled
for such updates.
Fixed wrong condition in code that determines whether to use
record cache for self-joined table updates.
Only MyISAM tables were affected.
Problem: cast to unsigned limited result to
max signed bigint 9223372036854775808,
instead of max unsigned bigint 18446744073709551615.
Fix: don't use args[0]->val_int() when casting from
a floating point number, use val() instead, with range checkings,
special to unsigned data type.
item_func.cc:
Special handling of cast from REAL_RESULT
to unsigned int: we cannot execute args[0]->val_int()
because it cuts max allowed value to LONGLONG_INT,
instead of ULONGLONG_INT required.
count_distinct3.test:
Getting rid of "Data truncated; out of range ..." warnings.
cast.test, cast.result:
Adding test case.
ps.result:
Fixing that cast from 6570515219.6535
to unsigned didn't round to 6570515220,
and returned 6570515219 instead.
can lead to a wrong result.
All date/time functions has the STRING result type thus their results are
compared as strings. The string date representation allows a user to skip
some of leading zeros. This can lead to wrong comparison result if a date/time
function result is compared to such a string constant.
The idea behind this bug fix is to compare results of date/time functions
and data/time constants as ints, because that date/time representation is
more exact. To achieve this the agg_cmp_type() is changed to take in the
account that a date/time field or an date/time item should be compared
as ints.
This bug fix is partially back ported from 5.0.
The agg_cmp_type() function now accepts THD as one of parameters.
In addition, it now checks if a date/time field/function is present in the
list. If so, it tries to coerce all constants to INT to make date/time
comparison return correct result. The field for the constant coercion is
taken from the Item_field or constructed from the Item_func. In latter case
the constructed field will be freed after conversion of all constant items.
Otherwise the result is same as before - aggregated with help of the
item_cmp_type() function.
From the Item_func_between::fix_length_and_dec() function removed the part
which was converting date/time constants to int if possible. Now this is
done by the agg_cmp_type() function.
The new function result_as_longlong() is added to the Item class.
It indicates that the item is a date/time item and result of it can be
compared as int. Such items are date/time fields/functions.
Correct val_int() methods are implemented for classes Item_date_typecast,
Item_func_makedate, Item_time_typecast, Item_datetime_typecast. All these
classes are derived from Item_str_func and Item_str_func::val_int() converts
its string value to int without regard to the date/time type of these items.
Arg_comparator::set_compare_func() and Arg_comparator::set_cmp_func()
functions are changed to substitute result type of an item with the INT_RESULT
if the item is a date/time item and another item is a constant. This is done
to get a correct result of comparisons like date_time_function() = string_constant.
The bug report revealed two problems related to min/max optimization:
1. If the length of a constant key used in a SARGable condition for
for the MIN/MAX fields is greater than the length of the field an
unwanted warning on key truncation is issued;
2. If MIN/MAX optimization is applied to a partial index, like INDEX(b(4))
than can lead to returning a wrong result set.
3.23 regression test failure
The member SEL_ARG::min_flag was not initialized,
due to which the condition for no GEOM_FLAG in function
key_or did not choose "Range checked for each record" as
the correct access method.
The IN() function uses agg_cmp_type() to aggregate all types of its arguments
to find out some common type for comparisons. In this particular case the
char() and the int was aggregated to double because char() can contain values
like '1.5'. But all strings which do not start from a digit are converted to
0. thus 'a' and 'z' become equal.
This behaviour is reasonable when all function arguments are constants. But
when there is a field or an expression this can lead to false comparisons. In
this case it makes more sense to coerce constants to the type of the field
argument.
The agg_cmp_type() function now aggregates types of constant and non-constant
items separately. If some non-constant items will be found then their
aggregated type will be returned. Thus after the aggregation constants will be
coerced to the aggregated type.
In multi-table delete a table for delete can't be used for selecting in
subselects. Appropriate error was raised but wasn't checked which leads to a
crash at the execution phase.
The mysql_execute_command() now checks for errors before executing select
for multi-delete.
argument can lead to a wrong result.
md5() and sha() functions treat their arguments as case sensitive strings.
But when they are compared their arguments were compared as a case
insensitive strings which leads to two functions with different arguments
and thus different results to being identical. This can lead to a wrong
decision made in the range optimizer and thus lead to a wrong result set.
Item_func_md5::fix_length_and_dec() and Item_func_sha::fix_length_and_dec()
functions now set binary collation on their arguments.
The Item_func_concat::val_str() function tries to make as less re-allocations
as possible. This results in appending strings returned by 2nd and next
arguments to the string returned by 1st argument if the buffer for the first
argument has enough free space. A constant subselect is evaluated only once
and its result is stored in an Item_cache_str. In the case when the first
argument of the concat() function is such a subselect Item_cache_str returns
the stored value and Item_func_concat::val_str() append values of other
arguments to it. But for the next row the value in the Item_cache_str isn't
restored because the subselect is a constant one and it isn't evaluated second
time. This results in appending string values of 2nd and next arguments to the
result of the previous Item_func_concat::val_str() call.
The Item_func_concat::val_str() function now checks whether the first argument
is a constant one and if so it doesn't append values of 2nd and next arguments
to the string value returned by it.
A pattern to generate binlog for DROPped temp table in close_temporary_tables
was buggy: could not deal with a grave-accent-in-name table.
The fix exploits `append_identifier()' for quoting and duplicating accents.
Binlog lacks encoding info about DROPped temporary table.
Idea of the fix is to switch temporary to system_charset_info when a temporary table
is DROPped for binlog. Since that is the server, that automatically, but not the client, who generates the query
the binlog should be updated on the server's encoding for the coming DROP.
The `write_binlog_with_system_charset()' is introduced to replace similar problematic places in the code.
A query with a group by and having clauses could return a wrong
result set if the having condition contained a constant conjunct
evaluated to FALSE.
It happened because the pushdown condition for table with
grouping columns lost its constant conjuncts.
Pushdown conditions are always built by the function make_cond_for_table
that ignores constant conjuncts. This is apparently not correct when
constant false conjuncts are present.
The bug was as follows: When merge_key_fields() encounters "t.key=X OR t.key=Y" it will
try to join them into ref_or_null access via "t.key=X OR NULL". In order to make this
inference it checks if Y<=>NULL, ignoring the fact that value of Y may be not yet known.
The fix is that the check if Y<=>NULL is made only if value of Y is known (i.e. it is a
constant).
TODO: When merging to 5.0, replace used_tables() with const_item() everywhere in merge_key_fields().
The reason of the bug is in that `get_var_with_binlog' performs missed
assingment of
the variables as side-effect. Doing that it eventually calls
`free_underlaid_joins' to pass as an argument `thd->lex->select_lex' of the lex
which belongs to the user query, not
to one which is emulated i.e SET @var1:=NULL.
`get_var_with_binlog' is refined to supply a temporary lex to sql_set_variables's stack.
Problem:
if a user was granted privileges on database "d1",
it also was able to act on "D1" (i.e. in upper case),
even on Unix with case sensitive file system.
Fix:
Initialize grant hash to use binary comparison
if lower_case_file_system is not set (on most unixes),
and case insensitive comparison otherwise (Windows, MacOSX).
mysqldump / SHOW CREATE TABLE will show the NEXT available value for
the PK, rather than the *first* one that was available (that named in
the original CREATE TABLE ... AUTO_INCREMENT = ... statement).
This should produce correct and robust behaviour for the obvious use
cases -- when no data were inserted, then we'll produce a statement
featuring the same value the original CREATE TABLE had; if we dump
with values, INSERTing the values on the target machine should set the
correct next_ID anyway (and if not, we'll still have our AUTO_INCREMENT =
... to do that). Lastly, just the CREATE statement (with no data) for
a table that saw inserts would still result in a table that new values
could safely be inserted to).
There seems to be no robust way however to see whether the next_ID
field is > 1 because it was set to something else with CREATE TABLE
... AUTO_INCREMENT = ..., or because there is an AUTO_INCREMENT column
in the table (but no initial value was set with AUTO_INCREMENT = ...)
and then one or more rows were INSERTed, counting up next_ID. This
means that in both cases, we'll generate an AUTO_INCREMENT =
... clause in SHOW CREATE TABLE / mysqldump. As we also show info on,
say, charsets even if the user did not explicitly give that info in
their own CREATE TABLE, this shouldn't be an issue.
As per above, the next_ID will be affected by any INSERTs that have
taken place, though. This /should/ result in correct and robust
behaviour, but it may look non-intuitive to some users if they CREATE
TABLE ... AUTO_INCREMENT = 1000 and later (after some INSERTs) have
SHOW CREATE TABLE give them a different value (say, CREATE TABLE
... AUTO_INCREMENT = 1006), so the docs should possibly feature a
caveat to that effect.
It's not very intuitive the way it works now (with the fix), but it's
*correct*. We're not storing the original value anyway, if we wanted
that, we'd have to change on-disk representation?
If we do dump/load cycles with empty DBs, nothing will change. This
changeset includes an additional test case that proves that tables
with rows will create the same next_ID for AUTO_INCREMENT = ... across
dump/restore cycles.
Confirmed by support as likely solution for client's problem.
In the code that converts IN predicates to EXISTS predicates it is changing
the select list elements to constant 1. Example :
SELECT ... FROM ... WHERE a IN (SELECT c FROM ...)
is transformed to :
SELECT ... FROM ... WHERE EXISTS (SELECT 1 FROM ... HAVING a = c)
However there can be no FROM clause in the IN subquery and it may not be
a simple select : SELECT ... FROM ... WHERE a IN (SELECT f(..) AS
c UNION SELECT ...) This query is transformed to : SELECT ... FROM ...
WHERE EXISTS (SELECT 1 FROM (SELECT f(..) AS c UNION SELECT ...)
x HAVING a = c) In the above query c in the HAVING clause is made to be
an Item_null_helper (a subclass of Item_ref) pointing to the real
Item_field (which is not referenced anywhere else in the query anymore).
This is done because Item_ref_null_helper collects information whether
there are NULL values in the result. This is OK for directly executed
statements, because the Item_field pointed by the Item_null_helper is
already fixed when the transformation is done. But when executed as
a prepared statement all the Item instances are "un-fixed" before the
recompilation of the prepared statement. So when the Item_null_helper
gets fixed it discovers that the Item_field it points to is not fixed
and issues an error. The remedy is to keep the original select list
references when there are no tables in the FROM clause. So the above
becomes : SELECT ... FROM ... WHERE EXISTS (SELECT c FROM (SELECT f(..)
AS c UNION SELECT ...) x HAVING a = c) In this way c is referenced
directly in the select list as well as by reference in the HAVING
clause. So it gets correctly fixed even with prepared statements. And
since the Item_null_helper subclass of Item_ref_null_helper is not used
anywhere else it's taken out.
Backporting a changeset made for 5.0. Comments from there:
The fix refines the algorithm of generating DROPs for binlog.
Temp tables with common pseudo_thread_id are clustered into one query.
Consequently one replication event per pseudo_thread_id is generated.
The bug caused wrong result sets for union constructs of the form
(SELECT ... ORDER BY order_list1 [LIMIT n]) ORDER BY order_list2.
For such queries order lists were concatenated and limit clause was
completely neglected.
Fixing part2 of this problem: AND didn't work well
with utf8_czech_ci and utf8_lithianian_ci in some cases.
The problem was because when during condition optimization
field was replaced with a constant, the constant's collation
and collation derivation was used later for comparison instead
of the field collation and derivation, which led to non-equal
new condition in some cases.
This patch copies collation and derivation from the field being removed
to the new constant, which makes comparison work using the same collation
with the one which would be used if no condition optimization were done.
In other words:
where s1 < 'K' and s1 = 'Y';
was rewritten to:
where 'Y' < 'K' and s1 = 'Y';
Now it's rewritten to:
where 'Y' collate collation_of_s1 < 'K' and s1 = 'Y'
(using derivation of s1)
Note, the first problem of this bug (with latin1_german2_ci) was fixed
earlier in 5.0 tree, in a separate changeset.
The bug caused a reported index corruption in the cases when
key_cache_block_size was not a multiple of myisam_block_size,
e.g. when key_cache_block_size=1536 while myisam_block_size=1024.
MySQL 4.1
and Bug#16920 rpl_deadlock_innodb fails in show slave status (reported for MySQL 5.1)
- backport of several fixes done in MySQL 5.0 to 4.1
- fix for new discovered instability (see comment on Bug#12429 + Bug#16920)
- reenabling of testcases
Conversion from int and real numbers to UCS2 didn't work fine:
CONVERT(100, CHAR(50) UNICODE)
CONVERT(103.9, CHAR(50) UNICODE)
The problem appeared because numbers have binary charset, so,
simple charset recast binary->ucs2 was performed
instead of real conversion.
Fixed to make numbers pretend to be non-binary.
used
In a simple queries a result of the GROUP_CONCAT() function was always of
varchar type.
But if length of GROUP_CONCAT() result is greater than 512 chars and temporary
table is used during select then the result is converted to blob, due to
policy to not to store fields longer than 512 chars in tmp table as varchar
fields.
In order to provide consistent behaviour, result of GROUP_CONCAT() now
will always be converted to blob if it is longer than 512 chars.
Item_func_group_concat::field_type() is modified accordingly.
too many open statements". The patch adds a new global variable
@@max_prepared_stmt_count. This variable limits the total number
of prepared statements in the server. The default value of
@@max_prepared_stmt_count is 16382. 16382 small statements
(a select against 3 tables with GROUP, ORDER and LIMIT) consume
100MB of RAM. Once this limit has been reached, the server will
refuse to prepare a new statement and return ER_UNKNOWN_ERROR
(unfortunately, we can't add new errors to 4.1 without breaking 5.0). The limit is changeable after startup
and can accept any value from 0 to 1 million. In case
the new value of the limit is less than the current
statement count, no new statements can be added, while the old
still can be used. Additionally, the current count of prepared
statements is now available through a global read-only variable
@@prepared_stmt_count.
gives wrong results". Implement previously missing
Item_row::cleanup. The bug is not repeatable in 5.0, probably
due to a coincidence: the problem is present in 5.0 as well.
The GROUP_CONCAT uses its own temporary table. When ROLLUP is present
it creates the second copy of Item_func_group_concat. This copy receives the
same list of arguments that original group_concat does. When the copy is
set up the result_fields of functions from the argument list are reset to the
temporary table of this copy.
As a result of this action data from functions flow directly to the ROLLUP copy
and the original group_concat functions shows wrong result.
Since queries with COUNT(DISTINCT ...) use temporary tables to store
the results the COUNT function they are also affected by this bug.
The idea of the fix is to copy content of the result_field for the function
under GROUP_CONCAT/COUNT from the first temporary table to the second one,
rather than setting result_field to point to the second temporary table.
To achieve this goal force_copy_fields flag is added to Item_func_group_concat
and Item_sum_count_distinct classes. This flag is initialized to 0 and set to 1
into the make_unique() member function of both classes.
To the TMP_TABLE_PARAM structure is modified to include the similar flag as
well.
The create_tmp_table() function passes that flag to create_tmp_field().
When the flag is set the create_tmp_field() function will set result_field
as a source field and will not reset that result field to newly created
field for Item_func_result_field and its descendants. Due to this there
will be created copy func to copy data from old result_field to newly
created field.
table.cc:
Fixing to use system_charset_info instead of default_charset_info.
Crash happened because the "ctype" array is empty in UCS2,
and thus cannot be used with my_isspace().
The reason why UCS2 appeared in this context was because of
of default_charset_info variable incorrectly substituted to my_isspace().
As functions check_db_name(), check_table_name() and check_column_name()
always get values in utf8, system_charset_info must be used instead.
ctype_ucs2_def.test, ctype_ucs2_def-master.opt, ctype_ucs2_def.result:
new file
For "count(*) while index_column = value" an index read
is done. It consists of an index scan and retrieval of
each key.
For efficiency reasons the index scan stores the key in
the special buffer 'lastkey2' once only. At the first
iteration it notes this fact with the flag
HA_STATE_RNEXT_SAME in 'info->update'.
For efficiency reasons, the key retrieval for blobs
does not allocate a new buffer, but uses 'lastkey2'...
Now I clear the HA_STATE_RNEXT_SAME flag whenever the
buffer has been polluted. In this case, the index scan
copies the key value again (and sets the flag again).
union.result, union.test:
Adding test case.
item.cc:
Allow safe character set conversion in UNION
- string constant to column's charset
- to unicode
Thus, UNION now works the same with CONCAT (and other string functions)
in respect of aggregating arguments with different character sets.
Fix URLs.
README:
Fix URL.
mysqltest.result:
Update test result for real_sleep error message.
mysqltest.c:
Fix do_sleep() to print correct command name for real_sleep.
column is increasing when table is recreated with PS/SP":
make use of create_field::char_length more consistent in the code.
Reinit create_field::length from create_field::char_length
for every execution of a prepared statement (actually fixes the
bug).
Bug #17257 ndb, update fails for inner joins if tables do not have Primary Key
change: the allocated area by setValue may not be around for later, store hidden key in special member variable instead
Bug #17158 load data infile of char values into table of char with no (PK) fails to load
Bug #17081 Doing "LOAD DATA INFILE" directly after delete can cause missing data
When setup_fields() function finds field named '*' it expands it to the list
of all table fields. It does so by checking that the first char of
field_name is '*', but it doesn't checks that the '* is the only char.
Due to this, when updating table with a field named like '*name', such field
is wrongly treated as '*' and expanded. This leads to making list of fields
to update being longer than list of the new values. Later, the fill_record()
function crashes by dereferencing null when there is left fields to update,
but no more values.
Added check in the setup_fields() function which ensures that the field
expanding will be done only when '*' is the only char in the field name.
fix for bug #15828 after review
doing val_str now before testing of null value secures the function for null values returned by dynamic functions - the fix before was incomplete andy covered constant null values
When InnoDB compares varchar field in ucs2 with given key using bin collation,
it calls my_strnncollsp_ucs2_bin() to perform comparison.
Because field length was lesser than length of key field should be padded
with trailing spaces in order to get correct result.
Because my_strnncollsp_ucs2_bin() was calling my_strnncollp_ucs2_bin(), which
doesn't pads field, wrong comparison result was returned. This results in
wrong result set.
my_strnncollsp_ucs2_bin() now compares fields like my_strnncollsp_ucs2 do,
but using binary collation.
field.cc:
BLOB variations have number-in-bytes limit,
unlike CHAR/VARCHAR which have number-of-characters limits.
A tinyblob column can store up to 255 bytes.
In the case of basic Latin letters (which use 1 byte per character)
we can store up to 255 characters in a tinyblob column.
When passing an utf8 tinyblob column as an argument into
a function (e.g. COALESCE) we need to reserve 3*255 bytes.
I.e. multiply length in bytes to mbcharlen for the character set.
Although in reality a tinyblob column can never be 3*255 bytes long,
we need to set max_length to multiply to make fix_length_and_dec()
of the function-caller (e.g. COALESCE) calculate the correct max_length
for the column being created.
ctype_utf8.result, ctype_utf8.test:
Adding test case.
for uca collation isalnum and strnncollsp don't agree on whether
0xC2A0 is a space (strnncollsp is right, isalnum is wrong).
they still don't, the bug was fixed by avoiding strnncollsp
table' lockup".
Changes from the innodb-4.1-ss11 snapshot.
Do not call os_file-create_tmpfile() at runtime. Instead, create
a tempfile at startup and guard access to it with a mutex.
Also, fix bugs:
10511: "Wrong padding of UCS2 CHAR columns in ON UPDATE CASCADE";
13778: "If FOREIGN_KEY_CHECKS=0, one can create inconsistent FOREIGN
KEYs". When FOREIGN_KEY_CHECKS=0 we still need to check that
datatypes between foreign key references are compatible.
Also, added test cases (also for bug 9802).
into parts when converting to Unicode.
m_ctype.h:
Reorganizing mb_wc return codes to be able
to return "an unassigned N-byte-long character".
sql_string.cc:
Adding code to detect and properly handle
unassigned characters (i.e. the those character
which are correctly formed according to the
character specifications, but don't have Unicode
mapping).
Many files:
Fixing conversion function to return new codes.
ctype_ujis.test, ctype_gbk.test, ctype_big5.test:
Adding a test case.
ctype_ujis.result, ctype_gbk.result, ctype_big5.result:
Fixing results accordingly.
Fix for bug#12429: Replication tests fail: "Slave_IO_Running" differs:
The value is not important, and it depends on timing. Mask it.
Backport and extension of a fix made by Matthias in 5.0, originally it was
1.1976 05/12/05 17:57:48 mleich@mysql.com
