- Atomic writes are enabled by default
- Automatically detect if device supports atomic write and use it if
atomic writes are enabled
- Remove ATOMIC WRITE options from CREATE TABLE
- Atomic write is a device option, not a table options as the table may
crash if the media changes
- Add support for SHANNON SSD cards
10.1 is merged into 10.2 now. Two issues are left to fix:
(1) encryption.innochecksum test
(2) read_page0 vs page_0_crypt_read
(1) innochecksum tool did not compile after merge because
buf_page_is_corrupted uses fil_crypt_t that has been changed.
extra/CMakeLists.txt: Added fil/fil0crypt.cc as dependency
as we need to use fil_crypt_verify_checksum for encrypted pages.
innochecksum.cc: If we think page is encrypted i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION != 0 we call
fil_crypt_verify_checksum() function to compare calculated
checksum to stored checksum calculated after encryption
(this is stored on different offset i.e.
FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION + 4).
If checksum does not match we call normal buf_page_is_corrupted
to compare calculated checksum to stored checksum.
fil0crypt.cc: add #ifdef UNIV_INNOCHECKSUM to be able to compile
this file for innochecksum tool.
(2) read_page0 is not needed and thus removed.
The InnoDB source code contains quite a few references to a closed-source
hot backup tool which was originally called InnoDB Hot Backup (ibbackup)
and later incorporated in MySQL Enterprise Backup.
The open source backup tool XtraBackup uses the full database for recovery.
So, the references to UNIV_HOTBACKUP are only cluttering the source code.
fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
fil_space_crypt_cleanup(): Call mutex_free() to pair with
fil_space_crypt_init().
fil_space_destroy_crypt_data(): Call mutex_free() to pair with
fil_space_create_crypt_data() and fil_space_read_crypt_data().
fil_crypt_threads_cleanup(): Call mutex_free() to pair with
fil_crypt_threads_init().
fil_space_free_low(): Invoke fil_space_destroy_crypt_data().
fil_close(): Invoke fil_space_crypt_cleanup(), just like
fil_init() invoked fil_space_crypt_init().
Datafile::shutdown(): Set m_crypt_info=NULL without dereferencing
the pointer. The object will be freed along with the fil_space_t
in fil_space_free_low().
Remove some unnecessary conditions (ut_free(NULL) is OK).
srv_shutdown_all_bg_threads(): Shut down the encryption threads
by calling fil_crypt_threads_end().
srv_shutdown_bg_undo_sources(): Do not prematurely call
fil_crypt_threads_end(). Many pages can still be written by
change buffer merge, rollback of incomplete transactions, and
purge, especially in slow shutdown (innodb_fast_shutdown=0).
innobase_shutdown_for_mysql(): Call fil_crypt_threads_cleanup()
also when innodb_read_only=1, because the threads will have been
created also in that case.
sync_check_close(): Re-enable the invocation of sync_latch_meta_destroy()
to free the mutex list.
MySQL 5.7 introduced WL#7943: InnoDB: Implement Information_Schema.Files
to provide a long-term alternative for accessing tablespace metadata.
The INFORMATION_SCHEMA.INNODB_* views are considered internal interfaces
that are subject to change or removal between releases. So, users should
refer to I_S.FILES instead of I_S.INNODB_SYS_TABLESPACES to fetch metadata
about CREATE TABLESPACE.
Because MariaDB 10.2 does not support CREATE TABLESPACE or
CREATE TABLE…TABLESPACE for InnoDB, it does not make sense to support
I_S.FILES either. So, let MariaDB 10.2 omit the code that was added in
MySQL 5.7. After this change, I_S.FILES will report the empty result,
unless some other storage engine in MariaDB 10.2 implements the interface.
(The I_S.FILES interface was originally created for the NDB Cluster.)
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
Analysis: Problem was that in fil_read_first_page we do find that
table has encryption information and that encryption service
or used key_id is not available. But, then we just printed
fatal error message that causes above assertion.
Fix: When we open single table tablespace if it has encryption
information (crypt_data) store this crypt data to the table
structure. When we open a table and we find out that tablespace
is not available, check has table a encryption information
and from there is encryption service or used key_id is not available.
If it is, add additional warning for SQL-layer.
Analysis: Problem was that when a new tablespace is created a default
encryption info is also created and stored to the tablespace. Later a
new encryption information was created with correct key_id but that
does not affect on IV.
Fix: Push encryption mode and key_id to lower levels and create
correct encryption info when a new tablespace is created.
This fix does not contain test case because, currently incorrect
encryption key causes page corruption and a lot of error messages
to error log causing mtr to fail.
Analysis: Problem is that both encrypted tables and compressed tables use
FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION to store
required metadata. Furhermore, for only compressed tables currently
code skips compression.
Fixes:
- Only encrypted pages store key_version to FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION,
no need to fix
- Only compressed pages store compression algorithm to FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION,
no need to fix as they have different page type FIL_PAGE_PAGE_COMPRESSED
- Compressed and encrypted pages now use a new page type FIL_PAGE_PAGE_COMPRESSED_ENCRYPTED and
key_version is stored on FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION and compression
method is stored after FIL header similar way as compressed size, so that first
FIL_PAGE_COMPRESSED_SIZE is stored followed by FIL_PAGE_COMPRESSION_METHOD
- Fix buf_page_encrypt_before_write function to really compress pages if compression is enabled
- Fix buf_page_decrypt_after_read function to really decompress pages if compression is used
- Small style fixes
Analysis: Problem was that we did try to read from tablespace
that was being dropped.
Fixed by introducing a new function to find a tablespace only
if it is not being dropped currently and adding this check
before trying to read pages from tablespace.
Analysis: At fil_spage_get_space there is small change that space
is found from tablespace list but we have not yet created node
for it (and added it to space->chain) and as we hold fil_system
mutex here fil_node_create can't continue.
Fixed by allowing UT_LIST_GET_LEN(space->chain) == 0|| 1 and
introducint two new functions that access filespace list
and before returning space check that node is also created.
Step 2:
-- Introduce temporal memory array to buffer pool where to allocate
temporary memory for encryption/compression
-- Rename PAGE_ENCRYPTION -> ENCRYPTION
-- Rename PAGE_ENCRYPTION_KEY -> ENCRYPTION_KEY
-- Rename innodb_default_page_encryption_key -> innodb_default_encryption_key
-- Allow enable/disable encryption for tables by changing
ENCRYPTION to enum having values DEFAULT, ON, OFF
-- In create table store crypt_data if ENCRYPTION is ON or OFF
-- Do not crypt tablespaces having ENCRYPTION=OFF
-- Store encryption mode to crypt_data and redo-log
Step 1:
-- Remove page encryption from dictionary (per table
encryption will be handled by storing crypt_data to page 0)
-- Remove encryption/compression from os0file and all functions
before that (compression will be added to buf0buf.cc)
-- Use same CRYPT_SCHEME_1 for all encryption methods
-- Do some code cleanups to confort InnoDB coding style
This patch ports the work that facebook has performed
to make innochecksum handle compressed tables.
the basic idea is to use actual innodb-code to perform
checksum verification rather than duplicating in innochecksum.cc.
to make this work, innodb code has been annotated with
lots of #ifndef UNIV_INNOCHECKSUM so that it can be
compiled outside of storage/innobase.
A new testcase is also added that verifies that innochecksum
works on compressed/non-compressed tables.
Merged from commit fabc79d2ea976c4ff5b79bfe913e6bc03ef69d42
from https://code.google.com/p/google-mysql/
The actual steps to produce this patch are:
take innochecksum from 5.6.14
apply changes in innodb from facebook patches needed to make innochecksum compile
apply changes in innochecksum from facebook patches
add handcrafted testcase
The referenced facebook patches used are:
91e25120e7847fe76ea51135628a5a4dbf7c240c
Merge Facebook commit f981a51a47519b0ba527917887f8adc6df9ae147
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6.
This just moves some structure definitions from inside a
single .cc file to a shared .h file, with a few tweaks to
allow these structures to be shared.
On its own, it should have no actual effect. This is needed later.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
buf0buf.cc line 2642.
Analysis: innodb_compression_algorithm is a global variable and
can change while we are building page compressed page. This could
lead page corruption.
Fix: Cache innodb_compression_algorithm on local variable before
doing any compression or page formating to avoid concurrent
change. Improved page verification on debug builds.
Analysis: InnoDB writes also files that do not contain FIL-header.
This could lead incorrect analysis on os_fil_read_func function
when it tries to see is page page compressed based on FIL_PAGE_TYPE
field on FIL-header. With bad luck uncompressed page that does
not contain FIL-headed, the byte on FIL_PAGE_TYPE position could
indicate that page is page comrpessed.
Fix: Upper layer must indicate is file space page compressed
or not. If this is not yet known, we need to read the FIL-header
and find it out. Files that we know that are not page compressed
we can always just provide FALSE.
