removed in MySQL 6.0
CREATE TABLE... TYPE= returns the warning "The syntax
'TYPE=storage_engine' is deprecated and will be removed in
MySQL 6.0. Please use 'ENGINE=storage_engine' instead"
This syntax is deprecated already from version 5.4.4, so
the message has been changed.
In addition, the deprecation macro was changed to reflect
the ServerPT decision not to include version number in the
warning message.
A number of test result files have been changed as a
consequence of the change in the deprecation macro.
When checking for an error after removing the special view error handler the code
was not taking into account that open_tables() may fail because of the current
statement being killed.
Added a check for thd->killed.
Added a client program to test it.
+ Fix for Bug#43114 wait_until_count_sessions too restrictive, random PB failures
+ Removal of a lot of other weaknesses found
+ modifications according to review
VARIABLE_VALUE field is decreased to 1024 symbols.
(affected I_S tables: GLOBAL_VARIABLES, SESSION_VARIABLES,
GLOBAL_STATUS, SESSION_STATUS).
The only variable which can be longer than 1024 is
init_connect. The variable will be truncated with warning.
Additional fix:
Added where condition filter which speed up queries which
have where condition with expressions which use VARIABLE_NAME
field.
changed 'charset', 'collation' field length from 64 to MY_CS_NAME_SIZE(32)
in tables:
SCHEMATA, TABLES, COLUMNS, CHARACTER_SETS,
COLLATIONS, COLLATION_CHARACTER_SET_APPLICABILITY
Length value is the length of the field,
Max_length is the length of the field value.
So Max_length can not be more than Length.
The fix: fixed calculation of the Item_empty_string item length
(Patch applied and queued on demand of Trudy/Davi.)
between 5.0 and 5.1.
The problem was that in the patch for Bug#11986 it was decided
to store original query in UTF8 encoding for the INFORMATION_SCHEMA.
This approach however turned out to be quite difficult to implement
properly. The main problem is to preserve the same IS-output after
dump/restore.
So, the fix is to rollback to the previous functionality, but also
to fix it to support multi-character-set-queries properly. The idea
is to generate INFORMATION_SCHEMA-query from the item-tree after
parsing view declaration. The IS-query should:
- be completely in UTF8;
- not contain character set introducers.
For more information, see WL4052.
but not collation.
The problem here was that text literals in a view were always
dumped with character set introducer. That lead to loosing
collation information.
The fix is to dump character set introducer only if it was
in the original query. That is now possible because there
is no problem any more of loss of character set of string
literals in views -- after WL#4052 the view is dumped
in the original character set.
command and reported to a client.
The fact that a timestamp field will be set to NO on UPDATE wasn't shown
by the SHOW COMMAND and reported to a client through connectors. This led to
problems in the ODBC connector and might lead to a user confusion.
A new filed flag called ON_UPDATE_NOW_FLAG is added.
Constructors of the Field_timestamp set it when a field should be set to NOW
on UPDATE.
The get_schema_column_record function now reports whether a timestamp field
will be set to NOW on UPDATE.
added get_field_default_value() function which obtains default value from the field
(used in store_create_info() & get_schema_column_record() functions)
Addendum to thr fix for bug 30000:
show procedure/function code defined only in debug builds
show_check.test:
Addendum to thr fix for bug 30000:
show procedure/function code defined only in debug builds
Bug#25422 (Hang with log tables)
Bug 17876 (Truncating mysql.slow_log in a SP after using cursor locks the
thread)
Bug 23044 (Warnings on flush of a log table)
Bug 29129 (Resetting general_log while the GLOBAL READ LOCK is set causes
a deadlock)
Prior to this fix, the server would hang when performing concurrent
ALTER TABLE or TRUNCATE TABLE statements against the LOG TABLES,
which are mysql.general_log and mysql.slow_log.
The root cause traces to the following code:
in sql_base.cc, open_table()
if (table->in_use != thd)
{
/* wait_for_condition will unlock LOCK_open for us */
wait_for_condition(thd, &LOCK_open, &COND_refresh);
}
The problem with this code is that the current implementation of the
LOGGER creates 'fake' THD objects, like
- Log_to_csv_event_handler::general_log_thd
- Log_to_csv_event_handler::slow_log_thd
which are not associated to a real thread running in the server,
so that waiting for these non-existing threads to release table locks
cause the dead lock.
In general, the design of Log_to_csv_event_handler does not fit into the
general architecture of the server, so that the concept of general_log_thd
and slow_log_thd has to be abandoned:
- this implementation does not work with table locking
- it will not work with commands like SHOW PROCESSLIST
- having the log tables always opened does not integrate well with DDL
operations / FLUSH TABLES / SET GLOBAL READ_ONLY
With this patch, the fundamental design of the LOGGER has been changed to:
- always open and close a log table when writing a log
- remove totally the usage of fake THD objects
- clarify how locking of log tables is implemented in general.
See WL#3984 for details related to the new locking design.
Additional changes (misc bugs exposed and fixed):
1)
mysqldump which would ignore some tables in dump_all_tables_in_db(),
but forget to ignore the same in dump_all_views_in_db().
2)
mysqldump would also issue an empty "LOCK TABLE" command when all the tables
to lock are to be ignored (numrows == 0), instead of not issuing the query.
3)
Internal errors handlers could intercept errors but not warnings
(see sql_error.cc).
4)
Implementing a nested call to open tables, for the performance schema tables,
exposed an existing bug in remove_table_from_cache(), which would perform:
in_use->some_tables_deleted=1;
against another thread, without any consideration about thread locking.
This call inside remove_table_from_cache() was not required anyway,
since calling mysql_lock_abort() takes care of aborting -- cleanly -- threads
that might hold a lock on a table.
This line (in_use->some_tables_deleted=1) has been removed.
binary SHOW CREATE TABLE or SELECT FROM I_S.
The problem is that mysqldump generates incorrect dump for a table
with non-ASCII column name if the mysqldump's character set is
ASCII.
The fix is to:
1. Switch character_set_client for the mysqldump's connection
to binary before issuing SHOW CREATE TABLE statement in order
to avoid conversion.
2. Dump switch character_set_client statements to UTF8 and back
for CREATE TABLE statement.
SHOW CREATE TABLE or SELECT FROM I_S.
This is the last patch for this bug, which depends on the big
CS patch and was pending.
The problem was that SHOW CREATE statements returned original
queries in the binary character set. That could cause the query
to be unreadable.
The fix is to use original character_set_client when sending
the original query to the client. In order to preserve the query
in mysqldump, 'binary' character set results should be set when
issuing SHOW CREATE statement. If either source or destination
character set is 'binary' , no conversion is performed.
The idea is that since the source character set is no longer
'binary', we fix the destination character set to still produce
valid dumps.
Problem: logging queries not using indexes we check a special flag which
is set only at the server startup and is not changing with a corresponding
server variable together.
Fix: check the variable value instead of the flag.
- BUG#11986: Stored routines and triggers can fail if the code
has a non-ascii symbol
- BUG#16291: mysqldump corrupts string-constants with non-ascii-chars
- BUG#19443: INFORMATION_SCHEMA does not support charsets properly
- BUG#21249: Character set of SP-var can be ignored
- BUG#25212: Character set of string constant is ignored (stored routines)
- BUG#25221: Character set of string constant is ignored (triggers)
There were a few general problems that caused these bugs:
1. Character set information of the original (definition) query for views,
triggers, stored routines and events was lost.
2. mysqldump output query in client character set, which can be
inappropriate to encode definition-query.
3. INFORMATION_SCHEMA used strings with mixed encodings to display object
definition;
1. No query-definition-character set.
In order to compile query into execution code, some extra data (such as
environment variables or the database character set) is used. The problem
here was that this context was not preserved. So, on the next load it can
differ from the original one, thus the result will be different.
The context contains the following data:
- client character set;
- connection collation (character set and collation);
- collation of the owner database;
The fix is to store this context and use it each time we parse (compile)
and execute the object (stored routine, trigger, ...).
2. Wrong mysqldump-output.
The original query can contain several encodings (by means of character set
introducers). The problem here was that we tried to convert original query
to the mysqldump-client character set.
Moreover, we stored queries in different character sets for different
objects (views, for one, used UTF8, triggers used original character set).
The solution is
- to store definition queries in the original character set;
- to change SHOW CREATE statement to output definition query in the
binary character set (i.e. without any conversion);
- introduce SHOW CREATE TRIGGER statement;
- to dump special statements to switch the context to the original one
before dumping and restore it afterwards.
Note, in order to preserve the database collation at the creation time,
additional ALTER DATABASE might be used (to temporary switch the database
collation back to the original value). In this case, ALTER DATABASE
privilege will be required. This is a backward-incompatible change.
3. INFORMATION_SCHEMA showed non-UTF8 strings
The fix is to generate UTF8-query during the parsing, store it in the object
and show it in the INFORMATION_SCHEMA.
Basically, the idea is to create a copy of the original query convert it to
UTF8. Character set introducers are removed and all text literals are
converted to UTF8.
This UTF8 query is intended to provide user-readable output. It must not be
used to recreate the object. Specialized SHOW CREATE statements should be
used for this.
The reason for this limitation is the following: the original query can
contain symbols from several character sets (by means of character set
introducers).
Example:
- original query:
CREATE VIEW v1 AS SELECT _cp1251 'Hello' AS c1;
- UTF8 query (for INFORMATION_SCHEMA):
CREATE VIEW v1 AS SELECT 'Hello' AS c1;
SHOW CREATE TABLE or SELECT FROM I_S.
Actually, the bug discovers two problems:
- the original query is not preserved properly. This is the problem
of BUG#16291;
- the resultset of SHOW CREATE TABLE statement is binary.
This patch fixes the second problem for the 5.0.
Both problems will be fixed in 5.1.
An attempt to open file with name '????????.frm'
can produce different errors:
- ER_NO_SUCH_TABLE on Unix
- ER_FILE_NOT_FOUND on Windows
because QUESTION MARK has special meaning on Windows.
Make sure that any of these two errors happens.
Problem: crash on attempt to open a table
having "#mysql50#" prefix in db or table name.
Fix: This prefix is reserved for "mysql_upgrade"
to access 5.0 tables whose file names are not encoded
according to "5.1 tablename to filename encoded".
Don't try open tables whose db name or table name
has this prefix.
