Don't install server files if WITHOUT_SERVER is specified.
"Server files" are defined as files going into the MariaDB-Server RPM,
that is files in the components Server, ManPagesServer, Server_Scripts,
IniFiles, SuportFiles, and Readme.
The upper 1M limit for max_prepared_stmt_count was set over 10 years
ago. It doesn't suite current hardware and a sysbench oltp_read_write
test with 512 threads will hit this limit.
As reported in MDEV-11969 "there's no way to ditch knowledge" about some
domain that is no longer updated on a server. Besides being of annoyance to
clutter output in DBA console stale domains can prevent the slave
to connect the master as MDEV-12012 witnesses.
What domain is obsolete must be evaluated by the user (DBA) according
to whether the domain info is still relevant and will the domain ever
receive any update.
This patch introduces a method to discard obsolete gtid domains from
the server binlog state. The removal requires no event group from such
domain present in existing binlog files though. If there are any the
containing logs must be first PURGEd in order for
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
succeed. Otherwise the command returns an error.
The list of obsolete domains can be computed through
intersecting two sets - the earliest (first) binlog's Gtid_list
and the current value of @@global.gtid_binlog_state - and extracting
the domain id components from the intersection list items.
The new DELETE_DOMAIN_ID featured FLUSH continues to rotate binlog
omitting the deleted domains from the active binlog file's Gtid_list.
Notice though when the command is ineffective - that none of requested to delete
domain exists in the binlog state - rotation does not occur.
Obsolete domain deletion is not harmful for connected slaves as long
as master side binlog files *purge* is synchronized with FLUSH-DELETE_DOMAIN_ID.
The slaves must have the last event from purged files processed as usual,
in order not to bump later into requesting a gtid from a file which
was already gone.
While the command is not replicated (as ordinary FLUSH BINLOG LOGS is)
slaves, even though having extra domains, won't suffer from reconnection errors
thanks to master-slave gtid connection protocol allowing the master
to be ignorant about a gtid domain.
Should at failover such slave to be promoted into master role it may run
the ex-master's
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
to clean its own binlog state.
NOTES.
suite/perfschema/r/start_server_low_digest.result
is re-recorded as consequence of internal parser codes changes.
be consistent and don't include the table name into the error message,
no other CREATE TABLE error does it.
(the crash happened, because thd->lex->query_tables was NULL)
Two bugs here:
* the server could create an frm (with a long attribute
value) that it could not read back
* Connect engine opened files from inside DROP TABLE
and was ignoring the error (correctly) but was not
hiding it from the server (incorrectly). This caused
a crash later when DROP TABLE was finishing successfully
while stmt_da already have seen an error.
Also added a text case for
MDEV-7935 CREATE TABLE ... AS SELECT ... can cause a Server crash (Assertion `0' in Protocol::end_statement)
because Connect stopped clearing the error status
in stmt_da as a fix for MDEV-7935
* my_yyabort_error() helper
* s/lex->thd/thd/
* remove 'else' after MYSQL_YYABORT (for consistency,
95% of the parser did not use 'else' in this case)
* simplify ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE
This occurs when replication stops with an error, domain-based parallel
replication is used, and the GTID position contains more than one domain.
Furthermore, it relates to the case where the SQL thread is restarted
without first stopping the IO thread.
In this case, the file/offset relay-log position does not correctly
represent the slave's multi-dimensional position, because other domains may
be far ahead of, or behind, the domain with the failing event. So the code
reverts the relay log position back to the start of a relay log file that is
known to be before all active domains.
There was a bug that when the SQL thread was restarted, the
rli->relay_log_state was incorrectly initialised from @@gtid_slave_pos. This
position will likely be too far ahead, due to reverting the relay log
position. Thus, if the replication fails again after the SQL thread restart,
the rli->restart_gtid_pos might be updated incorrectly. This in turn would
cause a second SQL thread restart to replicate from the wrong position, if
the IO thread was still left running.
The fix is to initialise rli->relay_log_state from @@gtid_slave_pos only
when we actually purge and re-fetch relay logs from the master, not at every
SQL thread start.
A related problem is the use of sql_slave_skip_counter to resolve
replication failures in this kind of scenario. Since the slave position is
multi-dimensional, sql_slave_skip_counter can not work properly - it is
indeterminate exactly which event is to be skipped, and is unlikely to work
as expected for the user. So make this an error in the case where
domain-based parallel replication is used with multiple domains, suggesting
instead the user to set @@gtid_slave_pos to reliably skip the desired event.
with plugin-load-add that are already registered at mysql.plugin
- issue just one error message, without this extra warning
- don't abuse ER_UDF_EXISTS, instead add a proper error message for plugins
- report started initialization for each plugin source
Adjust the configuration options, as discussed on the
maria-developers@ mailing list.
The option to hint a transaction to not be replicated in parallel is
now called @@skip_parallel_replication, consistent with
@@skip_replication.
And the --slave-parallel-mode is now simplified to have just one of
the following values:
none
minimal
conservative
optimistic
aggressive
This reflects successively harder efforts to find opportunities to run
things in parallel on the slave. It allows to extend the server with
more automatic heuristics in the future without having to introduce a
new configuration option for each and every one.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
length/dec/charset are still in LEX, because they're also used
for CAST and dynamic columns.
also
1. fix "MDEV-7041 COLLATION(CAST('a' AS CHAR BINARY)) returns a wrong result"
2. allow BINARY modifier in stored function RETURN clause
3. allow "COLLATION without CHARSET" in SP/SF (parameters, RETURN, DECLARE)
4. print correct variable name in error messages for stored routine parameters
Added MAX_STATEMENT_TIME user variable to automaticly kill queries after a given time limit has expired.
- Added timer functions based on pthread_cond_timedwait
- Added kill_handlerton() to signal storage engines about kill/timeout
- Added support for GRANT ... MAX_STATEMENT_TIME=#
- Copy max_statement_time to current user, if stored in mysql.user
- Added status variable max_statement_time_exceeded
- Added KILL_TIMEOUT
- Removed digest hash from performance schema tests as they change all the time.
- Updated test results that changed because of the new user variables or new fields in mysql.user
This functionallity is inspired by work done by Davi Arnaut at twitter.
Test case is copied from Davi's work.
Documentation can be found at
https://kb.askmonty.org/en/how-to-limittimeout-queries/
mysql-test/r/mysqld--help.result:
Updated for new help message
mysql-test/suite/perfschema/r/all_instances.result:
Added new mutex
mysql-test/suite/sys_vars/r/max_statement_time_basic.result:
Added testing of max_statement_time
mysql-test/suite/sys_vars/t/max_statement_time_basic.test:
Added testing of max_statement_time
mysql-test/t/max_statement_time.test:
Added testing of max_statement_time
mysys/CMakeLists.txt:
Added thr_timer
mysys/my_init.c:
mysys/mysys_priv.h:
Added new mutex and condition variables
Added new mutex and condition variables
mysys/thr_timer.c:
Added timer functions based on pthread_cond_timedwait()
This can be compiled with HAVE_TIMER_CREATE to benchmark agains timer_create()/timer_settime()
sql/lex.h:
Added MAX_STATEMENT_TIME
sql/log_event.cc:
Safety fix (timeout should be threated as an interrupted query)
sql/mysqld.cc:
Added support for timers
Added status variable max_statement_time_exceeded
sql/share/errmsg-utf8.txt:
Added ER_QUERY_TIMEOUT
sql/signal_handler.cc:
Added support for KILL_TIMEOUT
sql/sql_acl.cc:
Added support for GRANT ... MAX_STATEMENT_TIME=#
Copy max_statement_time to current user
sql/sql_class.cc:
Added timer functionality to THD.
Added thd_kill_timeout()
sql/sql_class.h:
Added timer functionality to THD.
Added KILL_TIMEOUT
Added max_statement_time variable in similar manner as long_query_time was done.
sql/sql_connect.cc:
Added handling of max_statement_time_exceeded
sql/sql_parse.cc:
Added starting and stopping timers for queries.
sql/sql_show.cc:
Added max_statement_time_exceeded for user/connects status in MariaDB 10.0
sql/sql_yacc.yy:
Added support for GRANT ... MAX_STATEMENT_TIME=# syntax, to be enabled in 10.0
sql/structs.h:
Added max_statement_time user resource
sql/sys_vars.cc:
Added max_statement_time variables
mysql-test/suite/roles/create_and_drop_role_invalid_user_table.test
Removed test as we require all fields in mysql.user table.
scripts/mysql_system_tables.sql
scripts/mysql_system_tables_data.sql
scripts/mysql_system_tables_fix.sql
Updated mysql.user with new max_statement_time field
