This problem is similar to MDEV-10306.
1. Fixing Item_str_conv::val_str(String *str) to return the result in "str",
and to use tmp_value only as a temporary buffer for args[0]->val_str().
The new code version now guarantees that the result is always returned in
"str". The trick with copy_if_not_alloced() is not used any more.
2. The change #1 revealed the same problem in SUBSTRING_INDEX(),
so some tests with combinations of UPPER()/LOWER() and SUBSTRING_INDEX()
started to fail. Fixing Item_func_substr_index::val_str() the same way,
to return the result in "str" and use tmp_value as a temporary buffer
for args[0]->val_str().
* Increased timeout counter in galera_wait_ready.inc
* Replaced useless include/wait_until_ready.inc after start_mysqld.inc
in galera_st_*.inc with wait_condition on cluster size.
Test galera_sst_mysqldump often fails with error "2013: Lost connection
to MySQL server during query". The connection is lost after the test
restart one of the nodes. This happens because the server closes client
connections if it is joining a cluster through SST method mysqldump.
On unlucky runs of the test it is possible that mysqld is restarted,
and then mtr client is disconnected while it tries to determine if
galera is ready before going on with the test.
This patch rewrites galera_wait_ready.inc so that it is immune to
being disconnected.
MariaDB adjustments.
mysqltest.cc : Allow 12 error codes at --error
wait_until_connected_again.inc: Replace numeric error codes with symbols
mysqltest.test: Add error codes to test that tests too many errorcodes
wait_until_connected_again issues 'SHOW STATUS' query repeatedly
until mysqld replies without errors.
However, SHOW STATUS is treated specially by wsrep in that it is
allowed to proceed even if wsrep is not yet in ready state. As a
consequence, after returning from wait_until_connected_again,
wsrep may not be ready yet and subsequent queries may fail with
error "1047 WSREP has not yet prepared node for application use".
To avoid those errors, the patch includes wait_wsrep_ready.inc at
the end of the wait_until_connected_again.
galera SST tests have a debug part, but we don't want to limit them
to fulltest2 builder. So, add support for test files that
have a debug part:
* add maybe_debug.inc and maybe_debug.combinations
* 'debug' combination is run when debug is available
* 'release' combination is run otherwise
* test wraps debug parts in if($with_debug) { ... }
* and creates ,debug.rdiff for debug results
InnoDB in Debian uses utf8mb4 as default character set since
version 10.0.20-2. This leads to major pain due to keys longer
than 767 bytes.
MariaDB 10.2 (and MySQL 5.7) introduced the setting
innodb_default_row_format that is DYNAMIC by default. These
versions also changed the default values of the parameters
innodb_large_prefix=ON and innodb_file_format=Barracuda.
This would allow longer column index prefixes to be created.
The original purpose of these parameters was to allow InnoDB
to be downgraded to MySQL 5.1, which is long out of support.
Every InnoDB version since MySQL 5.5 does support operation
with the relaxed limits.
We backport the parameter innodb_default_row_format to
MariaDB 10.1, but we will keep its default value at COMPACT.
This allows MariaDB 10.1 to be configured so that CREATE TABLE
is less likely to encounter a problem with the limitation:
loose_innodb_large_prefix=ON
loose_innodb_default_row_format=DYNAMIC
(Note that the setting innodb_large_prefix was deprecated in
MariaDB 10.2 and removed in MariaDB 10.3.)
The only observable difference in the behaviour with the default
settings should be that ROW_FORMAT=DYNAMIC tables can be created
both in the system tablespace and in .ibd files, no matter what
innodb_file_format has been assigned to. Unlike MariaDB 10.2,
we are not changing the default value of innodb_file_format,
so ROW_FORMAT=COMPRESSED tables cannot be created without
changing the parameter.
* don't use Env module in tests, use $ENV{xxx} instead
* collateral changes:
** $file in the error message was unset
** $file in the other error message was unset too :)
** source file arguments are conventionally upper-cased
** abort the test (die) on error, don't just echo/exit
Problem was that Binlog_checkpoint can happen at random times.
Fixed by not write binlog_checkpoint for the rpl_log test.
Other things:
- Removed not used variable "$keep_gtid_events"
- Added option for show_binlog_events to skip binlog_checkpoint
As reported in MDEV-11969 "there's no way to ditch knowledge" about some
domain that is no longer updated on a server. Besides being of annoyance to
clutter output in DBA console stale domains can prevent the slave
to connect the master as MDEV-12012 witnesses.
What domain is obsolete must be evaluated by the user (DBA) according
to whether the domain info is still relevant and will the domain ever
receive any update.
This patch introduces a method to discard obsolete gtid domains from
the server binlog state. The removal requires no event group from such
domain present in existing binlog files though. If there are any the
containing logs must be first PURGEd in order for
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
succeed. Otherwise the command returns an error.
The list of obsolete domains can be computed through
intersecting two sets - the earliest (first) binlog's Gtid_list
and the current value of @@global.gtid_binlog_state - and extracting
the domain id components from the intersection list items.
The new DELETE_DOMAIN_ID featured FLUSH continues to rotate binlog
omitting the deleted domains from the active binlog file's Gtid_list.
Notice though when the command is ineffective - that none of requested to delete
domain exists in the binlog state - rotation does not occur.
Obsolete domain deletion is not harmful for connected slaves as long
as master side binlog files *purge* is synchronized with FLUSH-DELETE_DOMAIN_ID.
The slaves must have the last event from purged files processed as usual,
in order not to bump later into requesting a gtid from a file which
was already gone.
While the command is not replicated (as ordinary FLUSH BINLOG LOGS is)
slaves, even though having extra domains, won't suffer from reconnection errors
thanks to master-slave gtid connection protocol allowing the master
to be ignorant about a gtid domain.
Should at failover such slave to be promoted into master role it may run
the ex-master's
FLUSH BINARY LOGS DELETE_DOMAIN_ID=(list-of-domains)
to clean its own binlog state.
NOTES.
suite/perfschema/r/start_server_low_digest.result
is re-recorded as consequence of internal parser codes changes.
Some tests are skipped by checks in suite.pm. It is redundant to
have an sql-level run-time check in the .inc file itself.
In some cases it's not only redundant, but dangerous.
After one bug in 10.2 innodb.create_isl_with_direct failed
to start InnoDB, but the server started fine (just without InnoDB)
and instead of failing, the test was skipped by run-time check in
have_innodb.inc.
# Conflicts:
# mysql-test/include/not_embedded.inc
# mysql-test/r/change_user_notembedded.result
# mysql-test/suite.pm
# mysql-test/t/change_user_notembedded.test
Introduce innodb_encrypt_log.combinations and prove that
the encryption and decryption take place during both
online ADD INDEX (WL#5266) and online table-rebuilding ALTER (WL#6625).
Assertions failed due to incorrect handling of the --tc-heuristic-recover
option when InnoDB is in read-only mode either due to innodb_read_only=1
or innodb_force_recovery>3. InnoDB failed to refuse a XA COMMIT or
XA ROLLBACK operation, and there were errors in the error handling in
the upper layer.
This was fixed by making InnoDB XA operations respect the
high_level_read_only flag. The InnoDB part of the fix and
parts of the test main.tc_heuristic_recover were provided
by Marko Mäkelä.
LOCK_log mutex lock/unlock had to be added to fix MDEV-13438.
The measure is confirmed by mysql sources as well.
For testing of the conflicting option combination, mysql-test-run is
made to export a new $MYSQLD_LAST_CMD. It holds the very last value
generated by mtr.mysqld_start(). Even though the options have been
also always stored in $mysqld->{'started_opts'} there were no access
to them beyond the automatic server restart by mtr through the expect
file interface.
Effectively therefore $MYSQLD_LAST_CMD represents a more general
interface to $mysqld->{'started_opts'} which can be used in wider
scopes including server launch with incompatible options.
Notice another existing method to restart the server with incompatible
options relying on $MYSQLD_CMD is is aware of $mysqld->{'started_opts'}
(the actual options that the server is launched by mtr). In order to use
this method they would have to be provided manually.
NOTE: When merging to 10.2, the file search_pattern_in_file++.inc
should be replaced with the pre-existing search_pattern_in_file.inc.
Problem
rpl.rpl_mdev-11092 fails in buildbot because after starting slave in
wait_for_slave_sql_error_and_skip.inc slave is started but there may be
chances that we have not skipped the last error and Last_SQL_Errno is
still not zero untill the end of rpl_end.inc , which will compare
Last_SQL_Errno to 0. So in this this case rpl_mdev-11092 fails.
Solution
After starting slave in wait_for_slave_sql_error_and_skip.inc we will wait for
Last_SQL_Errno to become 0.
The test did not handle correctly possible difference in system
timezone. The fix is to remove non-functional setting of local
time_zone and instead allow timestamp replacement to work with
any date/time
CREATE/DROP TEMPORARY TABLE are not safe to optimistically replicate in
parallel with other transactions, so they need to be marked as "ddl" in the
binlog.
This was already done for stand-alone CREATE/DROP TEMPORARY. But temporary
tables can also be created and dropped inside a BEGIN...END transaction, and
such transactions were not marked as ddl. Nor was the DROP TEMPORARY TABLE
statement emitted implicitly when a client connection is closed.
So this patch adds such ddl mark for the missing cases.
The difference to Kristian's original patch is mainly a fix in
mysql_trans_commit_alter_copy_data() to remember the unsafe_rollback_flags
over the temporary commit.
Rewrite the test encryption.innodb-checksum-algorithm not to
require any restarts or re-bootstrapping, and to cover all
innodb_page_size combinations.
Test innodb.101_compatibility with all innodb_page_size combinations.
innodb_page_size_small: A new set of combinations, for
innodb_page_size up to 16k. In MariaDB 10.0, this does not
make a difference, but in 10.1 and later, innodb_page_size
would cover 32k and 64k, for which ROW_FORMAT=COMPRESSED
is not available.
Enable these combinations in a few InnoDB tests.
- Do not throw output of exec command, if disable_result_log is set
save and dump it if exec fails. Need tha to meaningfully analyze
errors from mariabackup.
- rmdir now removes the entire tree. need that because xtrabackup tests
clean the whole directory.
- all filesystem modifying commands now require the argument to
be under MYSQLTEST_VARDIR or MYSQL_TMP_DIR.
* remove part of galera_var_cluster_address.test that can not be tested reliably
* reduce running time for galera_gcache_recover_manytrx.test
* Additional wait_conditions for GAL-401.test
Signed-off-by: Sachin Setiya <sachin.setiya@mariadb.com>
