Issue:
------
While using the LOAD statement to insert data into an
updateable view, the check to verify whether a column
is actually updatable is missing.
Solution for 5.5 and 5.6:
-------------------------
For a view whose column-list in specified in the LOAD
command, this check is not performed. This fix adds the
check.
This is a partial backport of Bug#21097485.
Solution for 5.7 and trunk:
---------------------------
For a view whose column-list is specified in the LOAD
command, this check is already performed. This fix adds the
same check when no column-list is specified.
When updating a table with virtual BLOB columns, the following might happen:
- an old record is read from the table, it has no virtual blob values
- update_virtual_fields() is run, vcol blob gets its value into the
record. But only a pointer to the value is in the table->record[0],
the value is in Field_blob::value String (but it doesn't have to be!
it can be in the record, if the column is just a copy of another
columns: ... b VARCHAR, c BLOB AS (b) ...)
- store_record(table,record[1]), old record now is in record[1]
- fill_record() prepares new values in record[0], vcol blob is updated,
new value replaces the old one in the Field_blob::value
- now both record[1] and record[0] have a pointer that points to the
*new* vcol blob value. Or record[1] has a pointer to nowhere if
Field_blob::value had to realloc.
To resolve this we unlink vcol blobs from the pointer to the
data (in the record[1]). Because the value is not *always* in
the Field_blob::value String, we need to remember what blobs
were unlinked. The orphan memory must be freed manually.
To complicate the matter, ha_update_row() is also used in
multi-update, in REPLACE, in INSERT ... ON DUPLICATE KEY UPDATE,
also on REPLACE ... SELECT, REPLACE DELAYED, and LOAD DATA REPLACE, etc
Partially backporting MDEV-9874 from 10.2 to 10.0
READ_INFO::read_field() raised the ER_INVALID_CHARACTER_STRING error
when reading an escape character followed by a multi-byte character.
Raising wellformedness errors in READ_INFO::read_field() was wrong,
because the main goal of READ_INFO::read_field() is to *unescape* the
data which was presumably escaped using mysql_real_escape_string(),
using the same character set with the one specified in
"LOAD DATA INFILE ... CHARACTER SET ..." (or assumed by default).
During LOAD DATA, multi-byte characters are not always scanned as a single
entity! In case of escaped data, parts of a multi-byte character can be
scanned on different loop iterations. So the old code erroneously tested
welformedness in the middle of a multi-byte character.
Moreover, the data after unescaping can go into a BLOB field, not a text field.
Wellformedness tests are meaningless in this case.
Ater this patch, wellformedness is only checked later, during
Field::store(str,length,cs) time. The loop that scans bytes only
makes sure to revert the changes made by mysql_real_escape_string().
Note, in some cases users can supply data which did not really go through
mysql_real_escape_string() and was escaped by some other means,
or was not escaped at all. The file reported in this MDEV contains
the string "\ä", which is an example of such improperly escaped data, as
- either there should be two backslashes: "\\ä"
- or there should be no backslashes at all: "ä"
mysql_real_escape_string() could not generate "\ä".
The crash happened when if my_error() was called for any reasons during loading
(e.g. a bad multi-byte sequence or a bad GEOMETRY value was found).
The server sent both error and progress packets, so the client disconnected.
The server then crashed on a assert about a wrong packet order in Debug build.
The server also tried to read from a closed socket when calling
READ_INFO::skip_data_till_eof().
As the crash happened only with "mysql" running in interactive mode,
no tests are possible. The problem was not reproducible with
"mysqltest" or "mysql" in batch mode.
LOAD DATA AT MASTER.
Revert "BUG#23080148 - BACKPORT BUG 14653594 AND BUG 20683959 TO"
This reverts commit 1d31f5b3090d129382b50b95512f2f79305715a1.
The commit causes replication incompatibility between minor revisions
and based on discussion with Srinivasarao, the patch is reverted.
MDEV-10134 Add full support for DEFAULT
- Added support for using tables with MySQL 5.7 virtual fields,
including MySQL 5.7 syntax
- Better error messages also for old cases
- CREATE ... SELECT now also updates timestamp columns
- Blob can now have default values
- Added new system variable "check_constraint_checks", to turn of
CHECK constraint checking if needed.
- Removed some engine independent tests in suite vcol to only test myisam
- Moved some tests from 'include' to 't'. Should some day be done for all tests.
- FRM version increased to 11 if one uses virtual fields or constraints
- Changed to use a bitmap to check if a field has got a value, instead of
setting HAS_EXPLICIT_VALUE bit in field flags
- Expressions can now be up to 65K in total
- Ensure we are not refering to uninitialized fields when handling virtual fields or defaults
- Changed check_vcol_func_processor() to return a bitmap of used types
- Had to change some functions that calculated cached value in fix_fields to do
this in val() or getdate() instead.
- store_now_in_TIME() now takes a THD argument
- fill_record() now updates default values
- Add a lookahead for NOT NULL, to be able to handle DEFAULT 1+1 NOT NULL
- Automatically generate a name for constraints that doesn't have a name
- Added support for ALTER TABLE DROP CONSTRAINT
- Ensure that partition functions register virtual fields used. This fixes
some bugs when using virtual fields in a partitioning function
MYSQL-5.5
The bug asks for a backport of bug#1463594 and bug#20682959. This
is required because of the fact that if replication is enabled, master
transaction can commit whereas slave can't commit due to not exact
'enviroment'. This manifestation is seen in bug#22024200.
- Moving the new my_charlen()-based code handling multi-byte characters
from READ_INFO::field_field() to a new method READ_INFO::read_mbtail()
- Reusing read_mbtail() in READ_INFO::read_value(), instead of the old
my_mbcharlen()-based code which did not catch broken byte sequences
The new class is used for:
- FIELDS TERMINATED BY 'string'
- LINES STARTING BY 'string'
- LINES TERMINATED BY 'string'
The implementation of "FIELDS ENCLOSED BY 'char'" and "FIELDS ESCAPED BY 'char'"
should eventually also switch to this class to support multi-byte characters.
Currently multi-byte ENCLOSED and ESCAPED characters are rejected at parse time.
buff, buff_length, end_of_buff. This unifies "LOAD DATA" and "LOAD XML", so
they now both use String for a temporary value storage.
This change will make further work for MDEV-6353 easier.
"Re-factor the code for post-join operations".
The patch mainly contains the code ported from mysql-5.6 and
created for two essential architectural changes:
1. WL#5558: Resolve ORDER BY execution method at the optimization stage
2. WL#6071: Inline tmp tables into the nested loops algorithm
The first task was implemented for mysql-5.6 by Ole John Aske.
It allows to make all decisions on ORDER BY operation at the optimization
stage.
The second task implemented for mysql-5.6 by Evgeny Potemkin adds JOIN_TAB
nodes for post-join operations that require temporary tables. It allows
to execute these operations within the nested loops algorithm that used to
be used before this task only for join queries. Besides these task moves
all planning on the execution of these operations from the execution phase
to the optimization phase.
Some other re-factoring changes of mysql-5.6 were pulled in, mainly because
it was easier to pull them in than roll them back. In particular all
changes concerning Ref_ptr_array were incorporated.
The port required some changes in the MariaDB code that concerned the
functionality of EXPLAIN and ANALYZE. This was done mainly by Sergey
Petrunia.
'SYSTEM LOCK' IN PROCESSLIST
Analysis
=========
Show processlist shows 'System Lock' in 'State' field while
LOAD DATA INFILE is running.
thd->proc_info update is missing in LOAD DATA INFILE path.
Thus any request will get last unpdated status from lock_table()
during open_table().
Fix:
=======
Update state information from LOAD DATA INFILE path.
NOT NULL constraint must be checked *after* the BEFORE triggers.
That is for INSERT and UPDATE statements even NOT NULL fields
must be able to store a NULL temporarily at least while
BEFORE INSERT/UPDATE triggers are running.
* move common code to a new set_bad_null_error() function
* move repeated comparison out of the loop
* remove unused code
* unused method Table_triggers_list::set_table
* redundant condition (if (table) after table was dereferenced)
* add an assert
The following left in semi-improved state to keep patch size reasonable:
- Field operator new: left thd_alloc(current_thd)
- Sql_alloc operator new: left thd_alloc(thd_get_current_thd())
- Item_args constructors: left thd_alloc(thd)
- Item_func_interval::fix_length_and_dec(): no THD arg, have to call current_thd
- Item_func_dyncol_exists::val_int(): same
- Item_dyncol_get::val_str(): same
- Item_dyncol_get::val_int(): same
- Item_dyncol_get::val_real(): same
- Item_dyncol_get::val_decimal(): same
- Item_singlerow_subselect::fix_length_and_dec(): same
- Part 3: Adding mem_root to push_back() and push_front()
Other things:
- Added THD as an argument to some partition functions.
- Added memory overflow checking for XML tag's in read_xml()
DESCRIPTION
===========
Inability of mysql LOAD XML command to handle empty XML
tags i.e. <row><tag/></row>. Also the behaviour is wrong
and (different than above) when there is a space in empty
tag i.e. <row><tag /></row>
ANALYSIS
========
In read_xml() the case where we encounter a close tag ('/')
we're decreasing the 'level' blindly which is wrong.
Actually when its an without-space-empty-tag (succeeding
char is '>'), we need to skip the decrement. In other words
whenever we hit a close tag ('/'), decrease the 'level'
only when (i) It's not an (without space) empty tag i.e.
<tag/> or, (ii) It is of format <row col="val" .../>
FIX
===
The switch case for '/' is modified. We've removed the
blind decrement of 'level'. We do it only when its not an
without-space-empty-tag. Also we are setting 'in_tag' to
false to let program know that we're done reading current
tag (required in the case of format <row col="val" .../>)
- Changed ER(ER_...) to ER_THD(thd, ER_...) when thd was known or if there was many calls to current_thd in the same function.
- Changed ER(ER_..) to ER_THD_OR_DEFAULT(current_thd, ER...) in some places where current_thd is not necessary defined.
- Removing calls to current_thd when we have access to thd
Part of this is optimization (not calling current_thd when not needed),
but part is bug fixing for error condition when current_thd is not defined
(For example on startup and end of mysqld)
Notable renames done as otherwise a lot of functions would have to be changed:
- In JOIN structure renamed:
examined_rows -> join_examined_rows
record_count -> join_record_count
- In Field, renamed new_field() to make_new_field()
Other things:
- Added DBUG_ASSERT(thd == tmp_thd) in Item_singlerow_subselect() just to be safe.
- Removed old 'tab' prefix in JOIN_TAB::save_explain_data() and use members directly
- Added 'thd' as argument to a few functions to avoid calling current_thd.
* remove unused (and not implemented) WRITE_NET type
* remove cast in my_b_write() macro. my_b_* macros are
function-like, casts are responsibility of the caller
* replace hackish _my_b_write(info,0,0) with the explicit
my_b_flush_io_cache() in my_b_write_byte()
* remove unused my_b_fill_cache()
* replace pbool -> my_bool
* make internal IO_CACHE functions static
* reformat comments, correct typos, remove obsolete comments (ISAM)
* assert valid cache type in init_functions()
* use IO_ROUND_DN() macro where appropriate
* remove unused DBUG_EXECUTE_IF in _my_b_cache_write()
* remove unnecessary __attribute__((unused))
* fix goto error in parse_file.cc
* remove redundant reinit_io_cache() in uniques.cc
* don't do reinit_io_cache() if the cache was not initialized
in ma_check.c
* extract duplicate functionality from various _my_b_*_read
functions into a common wrapper. Same for _my_b_*_write
* create _my_b_cache_write_r instead of having if's in
_my_b_cache_write (similar to existing _my_b_cache_read and
_my_b_cache_read_r)
* don't call mysql_file_write() from my_b_flush_io_cache(),
call info->write_function() instead
remove some 14-year old code that added support for
LOAD DATA replication to IO_CACHE:
* three callbacks, of which only two were actually used and that
were only needed for LOAD DATA replication but were
tested in every IO_CACHE instance
* an additional opaque void * argument in IO_CACHE, also only
used for LOAD DATA replication, but present everywhere
* the code to close IO_CACHE prematurely in LOAD DATA to have
these callbacks called in the correct order and a long
comment explaining what will happen if IO_CACHE is not
closed prematurely
* a variable to track whether IO_CACHE was closed prematurely
(to avoid double-closing it)
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
A "field" could be either an Item_field or
(if loading into a view) an Item_direct_ref that references Item_field.
Also: when iterating fields, use fields of the TABLE_LIST (table or view),
not fields of a TABLE (actual underlying table - might have more columns).
reset default fields not for every modified row, but only once,
at the beginning, as the set of modified fields doesn't change.
exception: INSERT ... ON DUPLICATE KEY UPDATE - the set of fields
does change per row and in that case we reset default fields per row.
The reason for the failure was a bug in an include file on debian that causes 'struct stat'
to have different sized depending on the environment.
This patch fixes so that we always include my_global.h or my_config.h before we include any other files.
Other things:
- Removed #include <my_global.h> in some include files; Better to always do this at the top level to have as few
"always-include-this-file-first' files as possible.
- Removed usage of some include files that where already included by my_global.h or by other files.
client/mysql_plugin.c:
Use my_global.h first
client/mysqlslap.c:
Remove duplicated include files
extra/comp_err.c:
Remove duplicated include files
include/m_string.h:
Remove duplicated include files
include/maria.h:
Remove duplicated include files
libmysqld/emb_qcache.cc:
Use my_global.h first
plugin/semisync/semisync.h:
Use my_pthread.h first
sql/datadict.cc:
Use my_global.h first
sql/debug_sync.cc:
Use my_global.h first
sql/derror.cc:
Use my_global.h first
sql/des_key_file.cc:
Use my_global.h first
sql/discover.cc:
Use my_global.h first
sql/event_data_objects.cc:
Use my_global.h first
sql/event_db_repository.cc:
Use my_global.h first
sql/event_parse_data.cc:
Use my_global.h first
sql/event_queue.cc:
Use my_global.h first
sql/event_scheduler.cc:
Use my_global.h first
sql/events.cc:
Use my_global.h first
sql/field.cc:
Use my_global.h first
Remove duplicated include files
sql/field_conv.cc:
Use my_global.h first
sql/filesort.cc:
Use my_global.h first
Remove duplicated include files
sql/gstream.cc:
Use my_global.h first
sql/ha_ndbcluster.cc:
Use my_global.h first
sql/ha_ndbcluster_binlog.cc:
Use my_global.h first
sql/ha_ndbcluster_cond.cc:
Use my_global.h first
sql/ha_partition.cc:
Use my_global.h first
sql/handler.cc:
Use my_global.h first
sql/hash_filo.cc:
Use my_global.h first
sql/hostname.cc:
Use my_global.h first
sql/init.cc:
Use my_global.h first
sql/item.cc:
Use my_global.h first
sql/item_buff.cc:
Use my_global.h first
sql/item_cmpfunc.cc:
Use my_global.h first
sql/item_create.cc:
Use my_global.h first
sql/item_geofunc.cc:
Use my_global.h first
sql/item_inetfunc.cc:
Use my_global.h first
sql/item_row.cc:
Use my_global.h first
sql/item_strfunc.cc:
Use my_global.h first
sql/item_subselect.cc:
Use my_global.h first
sql/item_sum.cc:
Use my_global.h first
sql/item_timefunc.cc:
Use my_global.h first
sql/item_xmlfunc.cc:
Use my_global.h first
sql/key.cc:
Use my_global.h first
sql/lock.cc:
Use my_global.h first
sql/log.cc:
Use my_global.h first
sql/log_event.cc:
Use my_global.h first
sql/log_event_old.cc:
Use my_global.h first
sql/mf_iocache.cc:
Use my_global.h first
sql/mysql_install_db.cc:
Remove duplicated include files
sql/mysqld.cc:
Remove duplicated include files
sql/net_serv.cc:
Remove duplicated include files
sql/opt_range.cc:
Use my_global.h first
sql/opt_subselect.cc:
Use my_global.h first
sql/opt_sum.cc:
Use my_global.h first
sql/parse_file.cc:
Use my_global.h first
sql/partition_info.cc:
Use my_global.h first
sql/procedure.cc:
Use my_global.h first
sql/protocol.cc:
Use my_global.h first
sql/records.cc:
Use my_global.h first
sql/records.h:
Don't include my_global.h
Better to do this at the upper level
sql/repl_failsafe.cc:
Use my_global.h first
sql/rpl_filter.cc:
Use my_global.h first
sql/rpl_gtid.cc:
Use my_global.h first
sql/rpl_handler.cc:
Use my_global.h first
sql/rpl_injector.cc:
Use my_global.h first
sql/rpl_record.cc:
Use my_global.h first
sql/rpl_record_old.cc:
Use my_global.h first
sql/rpl_reporting.cc:
Use my_global.h first
sql/rpl_rli.cc:
Use my_global.h first
sql/rpl_tblmap.cc:
Use my_global.h first
sql/rpl_utility.cc:
Use my_global.h first
sql/set_var.cc:
Added comment
sql/slave.cc:
Use my_global.h first
sql/sp.cc:
Use my_global.h first
sql/sp_cache.cc:
Use my_global.h first
sql/sp_head.cc:
Use my_global.h first
sql/sp_pcontext.cc:
Use my_global.h first
sql/sp_rcontext.cc:
Use my_global.h first
sql/spatial.cc:
Use my_global.h first
sql/sql_acl.cc:
Use my_global.h first
sql/sql_admin.cc:
Use my_global.h first
sql/sql_analyse.cc:
Use my_global.h first
sql/sql_audit.cc:
Use my_global.h first
sql/sql_base.cc:
Use my_global.h first
sql/sql_binlog.cc:
Use my_global.h first
sql/sql_bootstrap.cc:
Use my_global.h first
Use my_global.h first
sql/sql_cache.cc:
Use my_global.h first
sql/sql_class.cc:
Use my_global.h first
sql/sql_client.cc:
Use my_global.h first
sql/sql_connect.cc:
Use my_global.h first
sql/sql_crypt.cc:
Use my_global.h first
sql/sql_cursor.cc:
Use my_global.h first
sql/sql_db.cc:
Use my_global.h first
sql/sql_delete.cc:
Use my_global.h first
sql/sql_derived.cc:
Use my_global.h first
sql/sql_do.cc:
Use my_global.h first
sql/sql_error.cc:
Use my_global.h first
sql/sql_explain.cc:
Use my_global.h first
sql/sql_expression_cache.cc:
Use my_global.h first
sql/sql_handler.cc:
Use my_global.h first
sql/sql_help.cc:
Use my_global.h first
sql/sql_insert.cc:
Use my_global.h first
sql/sql_lex.cc:
Use my_global.h first
sql/sql_load.cc:
Use my_global.h first
sql/sql_locale.cc:
Use my_global.h first
sql/sql_manager.cc:
Use my_global.h first
sql/sql_parse.cc:
Use my_global.h first
sql/sql_partition.cc:
Use my_global.h first
sql/sql_plugin.cc:
Added comment
sql/sql_prepare.cc:
Use my_global.h first
sql/sql_priv.h:
Added error if we use this before including my_global.h
This check is here becasue so many files includes sql_priv.h first.
sql/sql_profile.cc:
Use my_global.h first
sql/sql_reload.cc:
Use my_global.h first
sql/sql_rename.cc:
Use my_global.h first
sql/sql_repl.cc:
Use my_global.h first
sql/sql_select.cc:
Use my_global.h first
sql/sql_servers.cc:
Use my_global.h first
sql/sql_show.cc:
Added comment
sql/sql_signal.cc:
Use my_global.h first
sql/sql_statistics.cc:
Use my_global.h first
sql/sql_table.cc:
Use my_global.h first
sql/sql_tablespace.cc:
Use my_global.h first
sql/sql_test.cc:
Use my_global.h first
sql/sql_time.cc:
Use my_global.h first
sql/sql_trigger.cc:
Use my_global.h first
sql/sql_udf.cc:
Use my_global.h first
sql/sql_union.cc:
Use my_global.h first
sql/sql_update.cc:
Use my_global.h first
sql/sql_view.cc:
Use my_global.h first
sql/sys_vars.cc:
Added comment
sql/table.cc:
Use my_global.h first
sql/thr_malloc.cc:
Use my_global.h first
sql/transaction.cc:
Use my_global.h first
sql/uniques.cc:
Use my_global.h first
sql/unireg.cc:
Use my_global.h first
sql/unireg.h:
Removed inclusion of my_global.h
storage/archive/ha_archive.cc:
Added comment
storage/blackhole/ha_blackhole.cc:
Use my_global.h first
storage/csv/ha_tina.cc:
Use my_global.h first
storage/csv/transparent_file.cc:
Use my_global.h first
storage/federated/ha_federated.cc:
Use my_global.h first
storage/federatedx/federatedx_io.cc:
Use my_global.h first
storage/federatedx/federatedx_io_mysql.cc:
Use my_global.h first
storage/federatedx/federatedx_io_null.cc:
Use my_global.h first
storage/federatedx/federatedx_txn.cc:
Use my_global.h first
storage/heap/ha_heap.cc:
Use my_global.h first
storage/innobase/handler/handler0alter.cc:
Use my_global.h first
storage/maria/ha_maria.cc:
Use my_global.h first
storage/maria/unittest/ma_maria_log_cleanup.c:
Remove duplicated include files
storage/maria/unittest/test_file.c:
Added comment
storage/myisam/ha_myisam.cc:
Move sql_plugin.h first as this includes my_global.h
storage/myisammrg/ha_myisammrg.cc:
Use my_global.h first
storage/oqgraph/oqgraph_thunk.cc:
Use my_config.h and my_global.h first
One could not include my_global.h before oqgraph_thunk.h (don't know why)
storage/spider/ha_spider.cc:
Use my_global.h first
storage/spider/hs_client/config.cpp:
Use my_global.h first
storage/spider/hs_client/escape.cpp:
Use my_global.h first
storage/spider/hs_client/fatal.cpp:
Use my_global.h first
storage/spider/hs_client/hstcpcli.cpp:
Use my_global.h first
storage/spider/hs_client/socket.cpp:
Use my_global.h first
storage/spider/hs_client/string_util.cpp:
Use my_global.h first
storage/spider/spd_conn.cc:
Use my_global.h first
storage/spider/spd_copy_tables.cc:
Use my_global.h first
storage/spider/spd_db_conn.cc:
Use my_global.h first
storage/spider/spd_db_handlersocket.cc:
Use my_global.h first
storage/spider/spd_db_mysql.cc:
Use my_global.h first
storage/spider/spd_db_oracle.cc:
Use my_global.h first
storage/spider/spd_direct_sql.cc:
Use my_global.h first
storage/spider/spd_i_s.cc:
Use my_global.h first
storage/spider/spd_malloc.cc:
Use my_global.h first
storage/spider/spd_param.cc:
Use my_global.h first
storage/spider/spd_ping_table.cc:
Use my_global.h first
storage/spider/spd_sys_table.cc:
Use my_global.h first
storage/spider/spd_table.cc:
Use my_global.h first
storage/spider/spd_trx.cc:
Use my_global.h first
storage/xtradb/handler/handler0alter.cc:
Use my_global.h first
storage/xtradb/handler/i_s.cc:
Use my_global.h first
Bug#18396916 MAIN.OUTFILE_LOADDATA TEST FAILS ON ARM, AARCH64, PPC/PPC64
The recorded results for the failing tests were wrong.
They were introduced by the patch for
Bug#30946 mysqldump silently ignores --default-character-set when used with --tab
Correct results were returned for platforms where 'char' is implemented as unsigned.
This was reported as
Bug#46895 Test "outfile_loaddata" fails (reproducible)
Bug#11755168 46895: TEST "OUTFILE_LOADDATA" FAILS (REPRODUCIBLE)
The patch for that bug fixed only parts of the problem,
leaving the incorrect results in the .result file.
Solution: use 'uchar' for field_terminator and line_terminator on all platforms.
Also: remove some un-necessary casts, leaving the ones we actually need.
Bug#18396916 MAIN.OUTFILE_LOADDATA TEST FAILS ON ARM, AARCH64, PPC/PPC64
The recorded results for the failing tests were wrong.
They were introduced by the patch for
Bug#30946 mysqldump silently ignores --default-character-set when used with --tab
Correct results were returned for platforms where 'char' is implemented as unsigned.
This was reported as
Bug#46895 Test "outfile_loaddata" fails (reproducible)
Bug#11755168 46895: TEST "OUTFILE_LOADDATA" FAILS (REPRODUCIBLE)
The patch for that bug fixed only parts of the problem,
leaving the incorrect results in the .result file.
Solution: use 'uchar' for field_terminator and line_terminator on all platforms.
Also: remove some un-necessary casts, leaving the ones we actually need.
LOCAL AND IMPORT ERRORS
Description:
-----------
This bug happens due to the fact that current algorithm is designed
that in the case of LOCAL load of data, in case of the error, the
remaining part of the file is read in order to return the proper
error message to the client side.
But, the problem with current implementation is that data stream
for the client side is cleared only in the case where line delimiters
exist, which is not a case with, for example fixed width
fields.
Fix:
----
Ported patch provided by Sinisa Milivojevic n bug report for this
issue to 5.5+ versions.
As part of this patch code is changed to clear the data stream
by calling new member function "READ_INFO::skip_data_till_eof".
LOCAL AND IMPORT ERRORS
Description:
-----------
This bug happens due to the fact that current algorithm is designed
that in the case of LOCAL load of data, in case of the error, the
remaining part of the file is read in order to return the proper
error message to the client side.
But, the problem with current implementation is that data stream
for the client side is cleared only in the case where line delimiters
exist, which is not a case with, for example fixed width
fields.
Fix:
----
Ported patch provided by Sinisa Milivojevic n bug report for this
issue to 5.5+ versions.
As part of this patch code is changed to clear the data stream
by calling new member function "READ_INFO::skip_data_till_eof".
This is port of fix for MySQL BUG#17647863.
revno: 5572
revision-id: jon.hauglid@oracle.com-20131030232243-b0pw98oy72uka2sj
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
timestamp: Thu 2013-10-31 00:22:43 +0100
message:
Bug#17647863: MYSQL DOES NOT COMPILE ON OSX 10.9 GM
Rename test() macro to MY_TEST() to avoid conflict with libc++.
- MDEV-5587 Server crashes in Locked_tables_list::restore_lock on CREATE OR REPLACE .. SELECT under LOCK
- MDEV-5586 Assertion `share->tdc.all_tables.is_empty() || remove_type != TDC_RT_REMOVE_ALL' fails in tdc_remove_table
- MDEV-5588 Strange error on CREATE OR REPLACE table over an existing view
mysql-test/r/create_or_replace.result:
Added test cases
mysql-test/r/lowercase_view.result:
New error message
mysql-test/r/merge.result:
New error message
mysql-test/r/multi_update.result:
New error message
mysql-test/r/subselect.result:
New error message
mysql-test/r/subselect_exists_to_in.result:
New error message
mysql-test/r/subselect_no_mat.result:
New error message
mysql-test/r/subselect_no_opts.result:
New error message
mysql-test/r/subselect_no_scache.result:
New error message
mysql-test/r/subselect_no_semijoin.result:
New error message
mysql-test/r/view.result:
New error message
mysql-test/suite/funcs_1/r/myisam_views-big.result:
New error message
mysql-test/t/create_or_replace.test:
New tests
mysql-test/t/view.test:
New error message
sql/share/errmsg-utf8.txt:
Added new error message
sql/sql_base.cc:
Updated error message
Do an automatic UNLOCK TABLES if we don't have any locked tables (safety fix)
sql/sql_db.cc:
Updated arguments
sql/sql_load.cc:
New error message
sql/sql_parse.cc:
Check that we are not using a table we are dropping and re-creating
sql/sql_table.cc:
Added parameter to mysql_rm_table_no_locks() to not automaticly do UNLOCK TABLES
Added better error message if trying to drop a view with DROP TABLE
Don't try to create something we select from
sql/sql_table.h:
Updated prototypes
The merge is still missing a few hunks related to temporary tables and
InnoDB log file size. The associated code did not seem to exist in
10.0, so the merge of that needs more work. Until this is fixed, there
are a number of test failures as a result.
REPEATED TWICE IN BINLOG
Problem:
=======
If LOAD DATA ... SET ... is used the last argument of SET is
repeated twice in replication binlog.
Analysis:
========
LOAD DATA statements are reconstructed once again before
they are written to the binary log. When SET clauses are
specified as part of LOAD DATA statement, these SET clause
user command strings need to be stored in order to rebuild
the original user command. During parsing each column and
the value in the SET command are stored in two differenet
lists. All the values are stored in a string list.
When SET expression has more than one value as shown in the
following example:
SET a = @a, b = CONCAT(@b, '| 123456789');
Parser extracts values in the following manner i.e Item name
, value string, actual length of the value of the item with
in the string.
Item a:
Value for a:"= @a, b = CONCAT(@b, '| 123456789')
str_length = 4
Item b:
Value for b:"= CONCAT(@b, '| 123456789')
str_length = 27
During reconstructing the LOAD DATA command the above
strings are retrived as it is and appended to the LOAD DATA
statement. Hence it becomes as shown below.
SET `a`= @a, b = CONCAT(@b, '| 123456789'),
`b`= CONCAT(@b, '| 123456789')
Fix:
===
During reconstruction of SET command, retrieve exact item
value string rather than reading the entire string.
sql/sql_load.cc:
Added code to extract the exact Item value.
REPEATED TWICE IN BINLOG
Problem:
=======
If LOAD DATA ... SET ... is used the last argument of SET is
repeated twice in replication binlog.
Analysis:
========
LOAD DATA statements are reconstructed once again before
they are written to the binary log. When SET clauses are
specified as part of LOAD DATA statement, these SET clause
user command strings need to be stored in order to rebuild
the original user command. During parsing each column and
the value in the SET command are stored in two differenet
lists. All the values are stored in a string list.
When SET expression has more than one value as shown in the
following example:
SET a = @a, b = CONCAT(@b, '| 123456789');
Parser extracts values in the following manner i.e Item name
, value string, actual length of the value of the item with
in the string.
Item a:
Value for a:"= @a, b = CONCAT(@b, '| 123456789')
str_length = 4
Item b:
Value for b:"= CONCAT(@b, '| 123456789')
str_length = 27
During reconstructing the LOAD DATA command the above
strings are retrived as it is and appended to the LOAD DATA
statement. Hence it becomes as shown below.
SET `a`= @a, b = CONCAT(@b, '| 123456789'),
`b`= CONCAT(@b, '| 123456789')
Fix:
===
During reconstruction of SET command, retrieve exact item
value string rather than reading the entire string.
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
LOAD DATA CAN CAUSE SQL INJECTION
Problem:
=======
A long SET expression in LOAD DATA is incorrectly truncated
when written to the binary log.
Analysis:
========
LOAD DATA statements are reconstructed once again before
they are written to the binary log. When SET clauses are
specified as part of LOAD DATA statement, these SET clause
user command strings need to be stored as it is inorder to
reconstruct the original user command. At present these
strings are stored as part of SET clause item tree's
top most Item node's name itself which is incorrect. As an
Item::name can be of MAX_ALIAS_NAME (256) size. Hence the
name will get truncated to "255".
Because of this the rewritten LOAD DATA statement will be
terminated incorrectly. When this statment is read back by
the mysqlbinlog tool it reads a starting single quote and
continuos to read till it finds an ending quote. Hence any
statement written post ending quote will be considered as
a new statement.
Fix:
===
As name field has length restriction the string value
should not be stored in Item::name. A new String list is
maintained to store the SET expression values and this list
is read during reconstrution.
sql/sql_lex.cc:
Clear the load data set string list during each query
execution.
sql/sql_lex.h:
Added a new String list to store the load data operation's
SET clause user command strings.
sql/sql_load.cc:
Read the SET clause user command strings from load data
set string list.
sql/sql_yacc.yy:
Store the SET caluse user command string as part of load
data set string list.
LOAD DATA CAN CAUSE SQL INJECTION
Problem:
=======
A long SET expression in LOAD DATA is incorrectly truncated
when written to the binary log.
Analysis:
========
LOAD DATA statements are reconstructed once again before
they are written to the binary log. When SET clauses are
specified as part of LOAD DATA statement, these SET clause
user command strings need to be stored as it is inorder to
reconstruct the original user command. At present these
strings are stored as part of SET clause item tree's
top most Item node's name itself which is incorrect. As an
Item::name can be of MAX_ALIAS_NAME (256) size. Hence the
name will get truncated to "255".
Because of this the rewritten LOAD DATA statement will be
terminated incorrectly. When this statment is read back by
the mysqlbinlog tool it reads a starting single quote and
continuos to read till it finds an ending quote. Hence any
statement written post ending quote will be considered as
a new statement.
Fix:
===
As name field has length restriction the string value
should not be stored in Item::name. A new String list is
maintained to store the SET expression values and this list
is read during reconstrution.
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
Generalized support for auto-updated and/or auto-initialized timestamp
and datetime columns. This patch is a reimplementation of MySQL's
"WL#5874: CURRENT_TIMESTAMP as DEFAULT for DATETIME columns". In order to
ease future merges, this implementation reused few function and variable
names from MySQL's patch, however the implementation is quite different.
TODO:
The only unresolved problem in this patch is the semantics of LOAD DATA for
TIMESTAMP and DATETIME columns in the cases when there are missing or NULL
columns. I couldn't fully comprehend the logic behind MySQL's behavior and
its relationship with their own documentation, so I left the results to be
more consistent with all other LOAD cases.
The problematic test cases can be seen by running the test file function_defaults,
and observing the test case differences. Those were left on purpose for discussion.
This allows us to avoid calculating variables (including those involving mutex) that doesn't match the given
wildcard in SHOW STATUS LIKE '...'
Removed all references to active_mi that could cause problems for multi-source replication.
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
include/mysql/plugin.h:
Added SHOW_SIMPLE_FUNC
include/mysql/plugin_audit.h.pp:
Updated .pp file
include/mysql/plugin_auth.h.pp:
Updated .pp file
include/mysql/plugin_ftparser.h.pp:
Updated .pp file
mysql-test/suite/multi_source/info_logs.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/info_logs.test:
Test new syntax
mysql-test/suite/multi_source/simple.result:
New columns in SHOW ALL SLAVES STATUS
mysql-test/suite/multi_source/simple.test:
test new syntax
mysql-test/suite/multi_source/syntax.result:
Updated result
mysql-test/suite/multi_source/syntax.test:
Test new syntax
mysql-test/suite/rpl/r/rpl_skip_replication.result:
Updated result
plugin/semisync/semisync_master_plugin.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
sql/item_create.cc:
Simplify code
sql/lex.h:
Added SLAVES keyword
sql/log.cc:
Constant -> define
sql/log_event.cc:
Added comment
sql/mysqld.cc:
SHOW_FUNC -> SHOW_SIMPLE_FUNC
Made slave_retried_trans, slave_received_heartbeats and heartbeat_period multi-source safe
Clear variable denied_connections and slave_retried_transactions on startup
sql/mysqld.h:
Added slave_retried_transactions
sql/rpl_mi.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Added start_all_slaves() and stop_all_slaves()
sql/rpl_mi.h:
Added prototypes
sql/rpl_rli.cc:
create_signed_file_name -> create_logfile_name_with_suffix
added executed_entries
sql/rpl_rli.h:
Added executed_entries
sql/share/errmsg-utf8.txt:
More and better error messages
sql/slave.cc:
Added more fields to SHOW ALL SLAVES STATUS
Added slave_retried_transactions
Changed constants -> defines
sql/sql_class.h:
Added comment
sql/sql_insert.cc:
active_mi.rli -> thd->rli_slave
sql/sql_lex.h:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_load.cc:
active_mi.rli -> thd->rli_slave
sql/sql_parse.cc:
Added START|STOP ALL SLAVES
sql/sql_prepare.cc:
Added SQLCOM_SLAVE_ALL_START & SQLCOM_SLAVE_ALL_STOP
sql/sql_reload.cc:
Made REFRESH RELAY LOG multi-source safe
sql/sql_repl.cc:
create_signed_file_name -> create_logfile_name_with_suffix
Don't send my_ok() from start_slave() or stop_slave() so that we can call it for all master connections
sql/sql_show.cc:
Compare wild cards early for all variables
sql/sql_yacc.yy:
Added START|STOP ALL SLAVES
Added SHOW ALL SLAVES STATUS
sql/sys_vars.cc:
Made replicate_events_marked_for_skip,slave_net_timeout and rpl_filter multi-source safe.
sql/sys_vars.h:
Simplify Sys_var_rpl_filter
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
QUOTING IN REPLICATION
Problem: Misquoting or unquoted identifiers may lead to
incorrect statements to be logged to the binary log.
Fix: we use specialized functions to append quoted identifiers in
the statements generated by the server.
dbug/tests.c:
Added __attribute__((unused)) to get rid of compiler warning
server-tools/instance-manager/guardian.cc:
Added __attribute__((unused)) to get rid of compiler warning
sql/filesort.cc:
Added __attribute__((unused)) to get rid of compiler warning
sql/slave.cc:
Added __attribute__((unused)) to get rid of compiler warning
sql/sql_load.cc:
Added __attribute__((unused)) to get rid of compiler warning
sql/sql_table.cc:
Added __attribute__((unused)) to get rid of compiler warning
storage/maria/ma_blockrec.c:
Added __attribute__((unused)) to get rid of compiler warning
storage/maria/ma_check.c:
Added missing cast
storage/maria/ma_loghandler.c:
Added __attribute__((unused)) to get rid of compiler warning
storage/maria/ma_recovery.c:
Added __attribute__((unused)) to get rid of compiler warning
storage/pbxt/src/cache_xt.cc:
Added __attribute__((unused)) to get rid of compiler warning
storage/xtradb/fil/fil0fil.c:
Removed not used variable
storage/xtradb/handler/ha_innodb.cc:
Use unused variable
vio/viosocket.c:
Remove usage of not used variable
vio/viosslfactories.c:
Added cast
