The bug prevented acceptance of UNION queries whose non-first select
clauses contained join expressions with degenerated single-table nests
as valid queries.
The bug was introduced into mysql-5.5 code line by the patch for
bug 33204.
mysql-test/suite/innodb/t/group_commit_crash.test:
remove autoincrement to avoid rbr being used for insert ... select
mysql-test/suite/innodb/t/group_commit_crash_no_optimize_thread.test:
remove autoincrement to avoid rbr being used for insert ... select
mysys/my_addr_resolve.c:
a pointer to a buffer is returned to the caller -> the buffer cannot be on the stack
mysys/stacktrace.c:
my_vsnprintf() is ok here, in 5.5
https://mariadb.atlassian.net/browse/MDEV-28
This task implements a new clause LIMIT ROWS EXAMINED <num>
as an extention to the ANSI LIMIT clause. This extension
allows to limit the number of rows and/or keys a query
would access (read and/or write) during query execution.
------------------------------------------------------------
revno: 3258
committer: Jon Olav Hauglid <jon.hauglid@oracle.com>
branch nick: mysql-trunk-bug12663165
timestamp: Thu 2011-07-14 10:05:12 +0200
message:
Bug#12663165 SP DEAD CODE REMOVAL DOESN'T UNDERSTAND CONTINUE HANDLERS
When stored routines are loaded, a simple optimizer tries to locate
and remove dead code. The problem was that this dead code removal
did not work correctly with CONTINUE handlers.
If a statement triggers a CONTINUE handler, the following statement
will be executed after the handler statement has completed. This
means that the following statement is not dead code even if the
previous statement unconditionally alters control flow. This fact
was lost on the dead code removal routine, which ended up with
removing instructions that could have been executed. This could
then lead to assertions, crashes and generally bad behavior when
the stored routine was executed.
This patch fixes the problem by marking as live code all stored
routine instructions that are in the same scope as a CONTINUE handler.
Test case added to sp.test.
There was memory leak when running some tests on PB2.
The reason of the failure is an early return from change_master()
that was supposed to deallocate a dyn-array.
Actually the same bug58915 was fixed in trunk with relocating the dyn-array
destruction into THD::cleanup_after_query() which can't be bypassed.
The current patch backports magne.mahre@oracle.com-20110203101306-q8auashb3d7icxho
and adds two optimizations: were done: the static buffer for the dyn-array to base on,
and the array initialization is called precisely when it's necessary rather than
per each CHANGE-MASTER as before.
mysql-test/suite/rpl/t/rpl_empty_master_host.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
mysql-test/suite/rpl/t/rpl_server_id_ignore.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
sql/sql_class.cc:
relocating the dyn-array
destruction into THD::cleanup_after_query().
sql/sql_lex.cc:
LEX.mi zero initialization is done in LEX().
sql/sql_lex.h:
Optimization for repl_ignore_server_ids to base on a static buffer
which size is chosen to fit to most common use cases.
sql/sql_repl.cc:
dyn-array destruction is relocated to THD::cleanup_after_query().
sql/sql_yacc.yy:
Refining logics of Lex->mi.repl_ignore_server_ids initialization.
The array is initialized once a corresponding option in CHANGE MASTER token sequence
is found.
There was memory leak when running some tests on PB2.
The reason of the failure is an early return from change_master()
that was supposed to deallocate a dyn-array.
Fixed with relocating the dyn-array's destructor at ~LEX() that is
the end of the session, per Gleb's patch idea.
Two optimizations were done: the static buffer for the dyn-array to base on,
and the array initialization is called precisely when it's necessary rather than
per each CHANGE-MASTER as before.
mysql-test/suite/rpl/t/rpl_empty_master_host.test:
the test is binlog-format insensitive so it will be run with MIXED mode only.
sql/sql_lex.cc:
the new flag is initialized.
sql/sql_lex.h:
A new bool flag new member to LEX.mi is added to stay UP since after
LEX.mi.repl_ignore_server_ids dynarray initialization was called
for the first time on the session. So it is set once and its life time
is session.
The array is destroyed at the end of the session.
sql/sql_repl.cc:
dyn-array destruction is relocated to ~LEX.
sql/sql_yacc.yy:
Refining logics of Lex->mi.repl_ignore_server_ids initialization.
The array is initialized once a corresponding option in CHANGE MASTER token sequence
is found.
The fact of initialization is memorized into the new flag.
sql/sql_insert.cc:
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
******
CREATE ... IF NOT EXISTS may do nothing, but
it is still not a failure. don't forget to my_ok it.
sql/sql_table.cc:
small cleanup
******
small cleanup
One can set @@global.max_user_connections to -1 to block anyone, except SUPER user, to login.
If max_user_connection is 0, one can't change it without a restart (needed to get user connections counting to work correctly)
mysql-test/r/system_mysql_db.result:
Changed max_user_connections to handle negative numbers.
mysql-test/r/user_limits-2.result:
New test case that one can't change max_user_connection if it was 0
mysql-test/r/user_limits.result:
Fixed wrong error messages.
mysql-test/r/variables.result:
Store / restore max_user_connections (needed as there is now a --master.opt file that changes it)
mysql-test/t/subselect_mat_cost-master.opt:
Enable slow query log (as this test found some errors in slow query logging)
mysql-test/t/user_limits-2.test:
New test case that one can't change max_user_connection if it was 0
mysql-test/t/user_limits-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/user_limits.test:
Test max_user_connections -1
mysql-test/t/variables-master.opt:
Set max_user_connections (as one can't change it if it was 0)
mysql-test/t/variables.test:
Set/restore max_user_connections
scripts/Makefile.am:
Add a text message to mysql_fix_privilege_tables.sql that it's automaticly generated
scripts/mysql_system_tables.sql:
Change max_user_connections to signed
scripts/mysql_system_tables_fix.sql:
Change max_user_connections to signed
sql/item_func.cc:
Change SHOW_INT to be signed.
(Needed for max_user_connections and it's probably a bug that it was not originally signed)
sql/log.cc:
Remove some code that was not needed (All these variables are reset at start of query)
sql/mysql_priv.h:
Made max_user_connections signed.
Added max_user_connections_checking
sql/mysqld.cc:
Added max_user_connections_checking so that we know if max_user_connections was 0 at startup
(Which means that we will not do connection counting for accounts that don't have user resource limits)
Set thd->start_utime at same time as thr_create_utime. (Before start_utime could be < thr_create_utime which lead to wrong query counting)
sql/set_var.cc:
Don't allow one to change 'max_user_connections' if it was 0 at startup.
sql/sql_acl.cc:
Change user_connection counting to be negative.
sql/sql_connect.cc:
If max_user_connections is < 0 then only SUPER user can login.
Fixed wrong variable names for error messages.
Fixed wrong initial value for questions.
Set thd->start_utime and thd->thr_create_utime at startup. Needed to get time_out_user_resource_limits() to work.
sql/sql_show.cc:
SHOW_INT is now negative
sql/sql_yacc.yy:
Support negative values for MAX_USER_CONNECTIONS
sql/structs.h:
Make user connect counting work with signed numbers.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
First code
- "Asynchronous procedure call" system
- new THD::check_killed() that serves APC request is called from within most important loops
- EXPLAIN code is now able to generate EXPLAIN output on-the-fly [incomplete]
Parts that are still missing:
- put THD::check_killed() call into every loop where we could spend significant amount of time
- Make sure EXPLAIN code works for group-by queries that replace JOIN::join_tab with make_simple_join()
and other such cases.
- User interface: what error code to use, where to get timeout settings from, etc.
SET STATEMENT.
Server built with debug asserts, without debug crashes if a user tries
to run a stored procedure that constains query with subquery that include
either LIMIT or LIMIT OFFSET clauses.
The problem was that Item::fix_fields() was not called for the items
representing LIMIT or OFFSET clauses.
The solution is to call Item::fix_fields() right before evaluation in
st_select_lex_unit::set_limit().
mysql-test/r/sp.result:
Added testcase result for bug#12621017. Updated testcase result for
bug 11918.
mysql-test/t/sp.test:
Added testcase for bug#12621017. Addressed review comments for Bug 11918
(added tests for use LIMIT at stored function).
sql/item.h:
Addressed review comments for Bug 11918.
sql/share/errmsg-utf8.txt:
Addressed review comments for Bug 11918.
sql/sp_head.cc:
Addressed review comments for Bug 11918.
sql/sql_lex.cc:
Added call fix_fields() for item just before its evaluation.
sql/sql_yacc.yy:
Addressed review comments for Bug 11918.
In 5.5, REFRESH SLAVE is used as an alias for RESET SLAVE and
was removed in 5.6. Reseting a slave through REFRESH SLAVE was
causing errors in the valgrind platform since reset_slave_info
was undefined.
To fix the problem, we have set reset_slave_info while calling
REFRESH SLAVE.
There are 2 volatile condition constructions AND/OR constructions and fields(references) when first
good supported to be top elements of conditions because it is normal practice
(see copy_andor_structure for example) fields without any expression in the condition is really rare
and mostly useless case however it could lead to problems when optimiser changes/moves them unaware
of other variables referring to them. An easy solution of this problem is just to replace single field
in a condition with equivalent expression well supported by the server (<field> -> <field> != 0).
mysql-test/r/view.result:
New test added.
mysql-test/t/view.test:
New test added.
sql/sql_parse.cc:
<field> -> <field> != 0
sql/sql_yacc.yy:
<field> -> <field> != 0
Before BUG#28796, an empty host was used to identify that an instance was no
longer a slave. However, BUG#28796 changed this behavior and one cannot set
an empty host. Besides, a RESET SLAVE only cleans up information on the next
event to retrieve from the master, disables ssl and resets heartbeat period.
So a call to SHOW SLAVE STATUS after issuing a RESET SLAVE still returns some
valid information, such as host, port, user and password.
To fix this problem, we have introduced the command RESET SLAVE ALL that does
what a regular RESET SLAVE does and also clears host, port, user and password
information thus allowing users to identify when an instance is no longer a
slave.
When CREATE TABLE wasn't given ENGINE=... it would determine
the default ENGINE at parse-time rather than at execution
time, leading to incorrect behaviour (namely, later changes
to the default engine being ignore) when calling CREATE TABLE
from a stored procedure.
We now defer working out the default engine till execution of
CREATE TABLE.
mysql-test/r/sp_trans.result:
results!
mysql-test/t/sp_trans.test:
Show that CREATE TABLE (called from store routine) heeds
any changes after CREATE SP / parse-time. Show that explicitly
requesting an ENGINE still works.
sql/sql_parse.cc:
If no ENGINE=... was given at parse-time, determine default
engine at execution time of CREATE TABLE.
sql/sql_yacc.yy:
If CREATE TABLE is not given ENGINE=..., don't bother
figuring out the default engine during parsing; we'll
do it at execution time instead to be aware of the
latest updates.
Bug#11766642: crash in Item_field::register_field_in_read_map
with view
(Former 59793)
Prior to the refactoring in this patch, Item_cond_xor behaved
partially as an Item_cond and partially as an Item_func. The
reasoning behind this was that XOR is currently not optimized
(thus should be Item_func instead of Item_cond), but it was
planned optimize it in the future (thus, made Item_cond anyway
to ease optimization later).
Even though Item_cond inherits from Item_func, there are
differences between these two. One difference is that the
arguments are stored differently. Item_cond stores them in a
list while Item_func store them in an args[].
BUG no 45221 was caused by Item_cond_xor storing arguments in
the list while users of the objects would look for them in
args[]. The fix back then was to store the arguments in both
locations.
In this bug, Item_cond_xor initially gets two Item_field
arguments. These are stored in the list inherited from
Item_cond and in args[] inherited from Item_func. During
resolution, find_field_in_view() replaces the Item_fields
stored in the list with Item_direct_view_refs, but args[]
still points to the unresolved Item_fields. This shows that
the fix for 45221 was incorrect.
The refactoring performed in this patch removes the confusion
by making the XOR item an Item_func period. A neg_transformer()
is also implemented for Item_func_xor to improve performance
when negating XOR expressions. An XOR is negated by negating
one of the operands.
client/mysql_upgrade.c:
missing DBUG_RETURN
client/mysqladmin.cc:
client plugin memory wasn't freed
client/mysqlcheck.c:
client plugin memory, defaults, a result set, a command-line option value were not freed.
missing DBUG_RETURN.
client/mysqldump.c:
client plugin memory wasn't freed
client/mysqlslap.c:
client plugin memory wasn't freed
client/mysqltest.cc:
hopeless. cannot be fixed.
mysql-test/valgrind.supp:
Bug#56666 is now fixed.
mysys/array.c:
really, don't allocate if the caller didn't ask to.
mysys/my_init.c:
safemalloc checks must be done at the very end
mysys/my_thr_init.c:
not needed anymore
sql-common/client.c:
memory leak
sql/log.cc:
log_file was not closed, memory leak.
sql/mysqld.cc:
fix bug#56666 (causing many P_S related memory leaks).
close_active_mi() not called for --bootstrap, memory leak.
sql/sql_lex.cc:
redo Lex->mi handling
sql/sql_lex.h:
redo Lex->mi handling
sql/sql_plugin.cc:
plugins having PLUGIN_VAR_MEMALLOC string variables have this variables allocated in every THD.
The memory was freed in ~THD but only if plugin was still active. If plugin was unloaded the
variable was not found and the memory was lost. By loading and unloading plugins an arbitrary
amount of memory can be lost.
sql/sql_repl.cc:
redo Lex->mi handling
sql/sql_yacc.yy:
completely wrong handling of Lex->mi - run-time memory leak, by repeating the statement
arbitrary amount of memory can be lost.
Lex->mi.repl_ignore_server_ids_opt was allocated when parsing CHANGE MASTER,
and freed after executing the statement. if parser failed on syntax (or another)
error the statement was never executed. Lex->mi was simply bzero-ed for the next
CHANGE MASTER statement.
sql/table.cc:
didn't compile
storage/perfschema/pfs_lock.h:
Bug#56666 is fixed
