If triggers are used for an insert/update/delete statement than the values of
all virtual columns must be computed as any of them may be used by the triggers.
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
Handle the 'set read_only=1' in lighter way, than the FLUSH TABLES READ LOCK;
For the transactional engines we don't wait for operations on that tables to finish.
per-file comments:
mysql-test/r/read_only_innodb.result
MDEV-136 Non-blocking "set read_only".
test result updated.
mysql-test/t/read_only_innodb.test
MDEV-136 Non-blocking "set read_only".
test case added.
sql/mysql_priv.h
MDEV-136 Non-blocking "set read_only".
The close_cached_tables_set_readonly() declared.
sql/set_var.cc
MDEV-136 Non-blocking "set read_only".
Call close_cached_tables_set_readonly() for the read_only::set_var.
sql/sql_base.cc
MDEV-136 Non-blocking "set read_only".
Parameters added to the close_cached_tables implementation,
close_cached_tables_set_readonly declared.
Prevent blocking on the transactional tables if the
set_readonly_mode is on.
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
If we did nothing in resolving unique table conflict we should not retry (it leed to infinite loop).
Now we retry (recheck) unique table check only in case if we materialized a table.
BUG#11761686 insert_id event is not filtered.
Two issues are covered.
INSERT into autoincrement field which is not the first part in the composed primary key
is unsafe by autoincrement logging design. The case is specific to MyISAM engine
because Innodb does not allow such table definition.
However no warnings and row-format logging in the MIXED mode was done, and
that is fixed.
Int-, Rand-, User-var log-events were not filtered along with their parent
query that made possible them to screw up execution context of the following
query.
Fixed with deferring their execution until the parent query.
******
Bug#11754117
Post review fixes.
mysql-test/suite/rpl/r/rpl_auto_increment_bug45679.result:
a new result file is added.
mysql-test/suite/rpl/r/rpl_filter_tables_not_exist.result:
results updated.
mysql-test/suite/rpl/t/rpl_auto_increment_bug45679.test:
regression test for BUG#11754117-45670 is added.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
regression test for filtering issue of BUG#11754117 - 45670 is added.
sql/log_event.cc:
Logics are added for deferring and executing events associated
with the Query event.
sql/log_event.h:
Interface to deferred events batch execution is added.
sql/rpl_rli.cc:
initialization for new RLI members is added.
sql/rpl_rli.h:
New members to RLI are added to facilitate deferred events gathering
and execution control;
two general character RLI cleanup methods are constructed.
sql/rpl_utility.cc:
Deferred_log_events methods are difined.
sql/rpl_utility.h:
A new class Deferred_log_events is defined to implement
IRU events gathering, execution and cleanup.
sql/slave.cc:
Necessary changes to initialize `rli->deferred_events' and prevent
deferred event deletion in the main read-exec branch.
sql/sql_base.cc:
A new safe-check function for multi-part pk with auto-increment is defined
and deployed in lock_tables().
sql/sql_class.cc:
Initialization for a new member and replication cleanups are added
to THD class.
sql/sql_class.h:
THD class receives a new member to hold a specific execution
context for slave applier.
sql/sql_parse.cc:
Execution of the deferred event in started prior to its parent query.
Fixed incorrect type casting which made all fields (except very first) changes to materialized table incorrect.
Saved list of view/derived table used items after expanding '*'.
This bug happened because the function find_field_in_view formed
autogenerated names of view columns without a possibility to roll
them back. In some situation it could cause memory misuses reported
by valgrind or even crashes.
When a view/derived table is converted from merged to materialized the
items from the used_item lists are substituted for items referring to
the fields of the result of the materialization. The problem appeared
with queries employing natural joins. Since the resolution of a natural
join was performed only once the used_item list formed at the second
execution of the query lacked the references to the fields that were
used only in the equality predicates generated for the natural join.
- Don't call update_virtual_fields() if table->vfield is not set
- Don't prealloc memory for in open_tables() as this is very seldom used.
sql/records.cc:
Don't call update_virtual_fields() if table->vfield is not set
sql/sql_base.cc:
Don't prealloc memory for in open_tables() as this is very seldom used.
Don't call update_virtual_fields() if table->vfield is not set
sql/sql_delete.cc:
Don't call update_virtual_fields() if table->vfield is not set
sql/sql_handler.cc:
Don't call update_virtual_fields() if table->vfield is not set
sql/sql_join_cache.cc:
Don't call update_virtual_fields() if table->vfield is not set
Move some frequent values to local variables
sql/sql_table.cc:
Don't call update_virtual_fields() if table->vfield is not set
sql/sql_update.cc:
Don't call update_virtual_fields() if table->vfield is not set
sql/table.cc:
Assert if update_virtual_fields is called with wrong parameters
- The bug would show up
- when using PS (so that we get re-execution)
- the left_expr of the subquery is a reference to viewname.column_name, so that it crashes
when one tries to use it without having called fix_fields for it.
- when using SJ-Materialization, which makes use of sj_subq_pred->left_expr expression
- The fix is to have setup_conds() fix sj_subq_pred->left_expr for semi-join nests it finds.
Fixed wrong mutex order bug in Aria when flush_log_for_bitmap() was called when table is not yet marked for change.
include/my_base.h:
Added flag that table is opened only for status
mysql-test/r/myisam-big.result:
Test case for lp:925377
mysql-test/t/myisam-big.test:
Test case for lp:925377
sql/sql_base.cc:
If thd->version == 0 (happens only when we are opening a table that is flushed under MYSQL_LOCK_IGNORE_FLUSH), open the table in HA_OPEN_FOR_STATUS mode
storage/maria/ma_bitmap.c:
Fixed wrong mutex order bug in Aria when flush_log_for_bitmap() was called when table is not yet marked for change.
storage/maria/ma_dbug.c:
Ignore last_version <= 1 as these are either flushed or only opened for status
storage/maria/ma_open.c:
Use last_version=1 as a marker that table was opened with HA_OPEN_FOR_STATUS.
In this case we just open a new version of the table in read only mode.
storage/myisam/mi_create.c:
Update prototype
storage/myisam/mi_dbug.c:
Ignore last_version <= 1 as these are either flushed or only opened for status
storage/myisam/mi_open.c:
Use last_version=1 as a marker that table was opened with HA_OPEN_FOR_STATUS.
If HA_OPEN_FOR_STATUS is used, we will not assert if there is an old not-to-be-used version of the table existing.
In this case we just open a new version of the table in read only mode.
storage/myisam/myisamdef.h:
Updated prototype
This also fixes a (not likely) crashing bug when forcing a thread that was doing a table lock to re-open it's files, for example by creating a trigger.
mysys/thr_lock.c:
Added more checking to find wrong locks.
Removed one, not needed, parameter to thr_lock
sql/lock.cc:
Fixed mysql_lock_tables() to retry with new sql_lock if lock fails. This was needed as table may be closed and reopened between retry's and then the old sql_lock will point to stale data.
sql/mysql_priv.h:
Updated prototype
sql/sql_base.cc:
Ensure that all tables are closed if opening of system table failes; This fixes the assert in THD::restore_backup_open_tables_state
sql/sql_handler.cc:
Updated variable type
Problem was that now we can merge derived table (subquery in the FROM clause).
Fix: in case of detected conflict and presence of derived table "over" the table which cased the conflict - try materialization strategy.
A table expression with a natural join or a USING clause is transformed
into an equivalent expression with equi-join ON conditions. If a reference
to a virtual column happened to occur only in these generated equi-join
conditions then it was not erroneously marked in the TABLE::vcol_set bitmap.
This could lead to wrong results for queries containing natural join
expressions or USING clauses.
client/mysqltest.cc:
Free mutex after usage (fixes valgrind warnings in embedded server)
mysql-test/include/gis_keys.inc:
Fixed failure in innodb.gis_test
mysql-test/r/gis.result:
Updated result
mysql-test/suite/innodb/r/innodb_gis.result:
Updated results
mysql-test/suite/innodb/t/innodb_bug38231.test:
Added handling of timeouts (happend on some servers in buildbot)
mysql-test/suite/innodb_plugin/r/innodb_gis.result:
Updated results
mysql-test/suite/innodb_plugin/t/innodb.test:
Use error names instead of numbers
mysql-test/suite/innodb_plugin/t/innodb_misc1.test:
This test requires utf8
mysql-test/suite/innodb_plugin/t/innodb_mysql.test:
This test requires Xtradb
sql/sql_base.cc:
Don't print table names for placeholders.
sql/sql_show.cc:
Temporary fix:
Save and restore db and table_name in mysqld_show_create (to get rid of valgrind warning)
A better solution that needs to be investgated is to not change these fields in mysql_derived_prepare()
sql/sql_view.cc:
Fixed valgrind warning
storage/xtradb/handler/ha_innodb.cc:
Don't access THD directly
cmd-line-utils/libedit/map.c:
Fixed compiler warning
cmd-line-utils/libedit/terminal.c:
Fixed compiler warning
cmd-line-utils/libedit/tty.c:
Fixed compiler warning
sql/sql_base.cc:
Fixed memory leak found by valgrind
storage/maria/compat_aliases.cc:
Ensure that recover_alias is also a set
storage/maria/ma_bitmap.c:
Proper fix for compiler warning
support-files/compiler_warnings.supp:
Fixed compiler warning
sql/sql_base.cc:
fix a memory leak
storage/xtradb/handler/ha_innodb.cc:
fix for a visual studio
storage/xtradb/row/row0ins.c:
valgrind complains about uninitialized variable.
incorrect errors in the innodb.test too
A non-first execution of a prepared statement missed a call of the
TABLE_LIST::process_index_hints() method in the code of the function
setup_tables().
At some scenarios this could lead to the choice of a quite inefficient
execution plan for the base query of the prepared statement.
In MariaDB, when running in ONLY_FULL_GROUP_BY mode,
the server produced in incorrect error message that there
is an aggregate function without GROUP BY, for artificially
created MIN/MAX functions during subquery MIN/MAX optimization.
The fix introduces a way to distinguish between artifially
created MIN/MAX functions as a result of a rewrite, and normal
ones present in the query. The test for ONLY_FULL_GROUP_BY violation
now tests in addition if a MIN/MAX function was part of a MIN/MAX
subquery rewrite.
In order to be able to distinguish these MIN/MAX functions, the
patch introduces an additional flag in Item_in_subselect::in_strategy -
SUBS_STRATEGY_CHOSEN. This flag is set when the optimizer makes its
final choice of a subuqery strategy. In order to make the choice
consistent, access to Item_in_subselect::in_strategy is provided
via new class methods.
******
Fix MySQL BUG#12329653
In MariaDB, when running in ONLY_FULL_GROUP_BY mode,
the server produced in incorrect error message that there
is an aggregate function without GROUP BY, for artificially
created MIN/MAX functions during subquery MIN/MAX optimization.
The fix introduces a way to distinguish between artifially
created MIN/MAX functions as a result of a rewrite, and normal
ones present in the query. The test for ONLY_FULL_GROUP_BY violation
now tests in addition if a MIN/MAX function was part of a MIN/MAX
subquery rewrite.
In order to be able to distinguish these MIN/MAX functions, the
patch introduces an additional flag in Item_in_subselect::in_strategy -
SUBS_STRATEGY_CHOSEN. This flag is set when the optimizer makes its
final choice of a subuqery strategy. In order to make the choice
consistent, access to Item_in_subselect::in_strategy is provided
via new class methods.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
- The problem was that Item_direct_view_ref and its embedded Item_field were getting incorrect
value of item->used_tables() after fix_fields() in the second and subsequent EXECUTE.
- Made relevant fixes in Item_field::fix_fields() and find_field_in_tables(), so that the
Item_field gets the correct attributes.
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
The idea is that my_global_flags is ored to the MyFlags parameter for the above functions if the MY_WME flag is not set.
As the my_global_flags has ME_JUST_INFO (mark error as 'note') and possible ME_NOREFRESH (write error to log) this will force mysqld to log the not critical error to the log as a note.
include/my_sys.h:
Moved MY_SYNC_DIR to ensure it never clashes with ME_JUST_INFO
Added my_global_flags
mysql-test/Makefile.am:
Removed not used bugs directory
mysys/my_init.c:
Added my_global_flags, a variable that is ored to MyFlags in a those mysys functions we want extra logging.
mysys/my_malloc.c:
Added support for my_global_flags
mysys/my_open.c:
Added support for my_global_flags
mysys/my_pread.c:
Added support for my_global_flags
mysys/my_read.c:
Added support for my_global_flags
mysys/my_static.c:
Added my_global_flags
mysys/my_write.c:
Added support for my_global_flags
sql/mysqld.cc:
Set my_global_flags for warning levels 10 & 11
sql/sql_base.cc:
Don't increment unhandled errors for notes or warnings.
- The problem was that the code that made the check whether the subquery is an AND-part of the WHERE
clause didn't work correctly for nested subqueries. In particular, grand-child subquery in HAVING was
treated as if it was in the WHERE, which eventually caused an assert when replace_where_subcondition
looked for the subquery predicate in the WHERE and couldn't find it there.
- The fix: Removed implementation of "thd_marker approach". thd->thd_marker was used to determine the
location of subquery predicate: setup_conds() would set accordingly it when making the
{where|on_expr}->fix_fields(...)
call so that AND-parts of the WHERE/ON clauses can determine they are the AND-parts.
Item_cond_or::fix_fields(), Item_func::fix_fields(), Item_subselect::fix_fields (this one was missed),
and all other items-that-contain-items had to reset thd->thd_marker before calling fix_fields() for
their children items, so that the children can see they are not AND-parts of WHERE/ON.
- The "thd_marker approach" required that a lot of code in different locations maintains correct value of
thd->thd_marker, so it was replaced with:
- The new approach with mark_as_condition_AND_part does not keep context in thd->thd_marker. Instead,
setup_conds() now calls
{where|on_expr}->mark_as_condition_AND_part()
and implementations of that function make sure that:
- parts of AND-expressions get the mark_as_condition_AND_part() call
- Item_in_subselect objects record that they are AND-parts of WHERE/ON
CRASHES SERVER
Flushing of MERGE table or one of its child tables, which was
locked by flushing thread using LOCK TABLES, might have caused
crashes or assertion failures if the thread failed to reopen
child or parent table.
Particularly, this might have happened when another connection
killed this FLUSH TABLE statement/connection.
Also this problem might have occurred when we failed to reopen
MERGE table or one of its children when executing DDL statement
under LOCK TABLES.
The problem was caused by the fact that reopen_tables() might
have failed to reopen child table but still tried to reopen,
reattach children for and re-lock its parent. Vice versa it
might have failed to reopen parent but kept references from
children to parent around. Since reopen_tables() closes table
it has failed to reopen and therefore frees all associated
memory such dangling references led to crashes when followed.
This patch solves this problem by ensuring that we always close
parent table and all its children if we fail to reopen this
table or one of its children. Same happens if we fail to reattach
children to parent.
Affects 5.1 only.
mysql-test/r/merge.result:
A test case for BUG#11763712.
mysql-test/t/merge.test:
A test case for BUG#11763712.
sql/sql_base.cc:
When flushing tables under LOCK TABLES, all locked
and flushed tables are released and then reopened.
It may happen that we failed to reopen some tables,
in this case we reopen as much tables as possible.
If it was not possible to reopen MERGE child, MERGE
parent is unusable and must be removed from thread
open tables list.
If it was not possible to reopen MERGE parent, all
MERGE child table objects are unusable as well, at
least because their locks are handled by MERGE parent.
They must also be removed from thread open tables
list.
In other words if it was impossible to reopen any
object of a MERGE table or reattach child tables,
all objects of this MERGE table must be considered
unusable and closed.
There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.
mysql-test/r/sp.result:
test case
mysql-test/t/sp.test:
test case
sql/sql_base.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_insert.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_prepare.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_select.cc:
THD::used_tables is replaced with LEX::used_tables
The problem was that optimizer removes some outer references (it they are
constant for example) and the list of outer items built during prepare phase is
not actual during execution phase when we need it as the cache parameters.
First solution was use pointer on pointer on outer reference Item and
initialize temporary table on demand. This solved most problem except case
when optimiser also reduce Item which contains outer references ('OR' in
this bug test suite).
The solution is to build the list of outer reference items on execution
phase (after optimization) on demand (just before temporary table creation)
by walking Item tree and finding outer references among Item_ident
(Item_field/Item_ref) and Item_sum items.
Removed depends_on list (because it is not neede any mnore for the cache, in the place where it was used it replaced with upper_refs).
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references (or other expression parameters in future).
mysql-test/r/subselect_cache.result:
A new test added.
mysql-test/r/subselect_scache.result:
Changes in creating the cache and its paremeters order or adding arguments of aggregate function (which is a parameter also, but this has no influence on the result).
mysql-test/t/subselect_cache.test:
Added a new test.
sql/item.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
Item_cache_wrapper collect parameters befor initialization of its cache.
sql/item.h:
depends_on removed.
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/item_cmpfunc.cc:
depends_on removed.
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_cmpfunc.h:
Added processor (collect_outer_ref_processor) to collect outer references.
sql/item_subselect.cc:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_subselect.h:
depends_on removed.
Added processor get_cache_parameters() method to collect outer references.
sql/item_sum.cc:
Added processor (collect_outer_ref_processor) method to collect outer references.
sql/item_sum.h:
Added processor (collect_outer_ref_processor) and get_cache_parameters() methods to collect outer references.
sql/opt_range.cc:
depends_on removed.
sql/sql_base.cc:
depends_on removed.
sql/sql_class.h:
New iterator added.
sql/sql_expression_cache.cc:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_expression_cache.h:
Build of list of items resolved in outer query done just before creating expression cache on the first execution of the subquery which removes influence of optimizer removing items (all optimization already done).
sql/sql_lex.cc:
depends_on removed.
sql/sql_lex.h:
depends_on removed.
sql/sql_list.h:
Added add_unique method to add only unique elements to the list.
sql/sql_select.cc:
Support of new Item list added.
sql/sql_select.h:
Support of new Item list added.
