Simulate slow statements only for COM_QUERY and COM_STMT_EXECUTE commands,
to exclude mysqld_stmt_prepare() and mysqld_stmt_close() entries from the log,
as they are not relevant for log_slow_debug.test. This simplifies the test.
There were two newly enabled warnings:
1. cast for a function pointers. Affected sql_analyse.h, mi_write.c
and ma_write.cc, mf_iocache-t.cc, mysqlbinlog.cc, encryption.cc, etc
2. memcpy/memset of nontrivial structures. Fixed as:
* the warning disabled for InnoDB
* TABLE, TABLE_SHARE, and TABLE_LIST got a new method reset() which
does the bzero(), which is safe for these classes, but any other
bzero() will still cause a warning
* Table_scope_and_contents_source_st uses `TABLE_LIST *` (trivial)
instead of `SQL_I_List<TABLE_LIST>` (not trivial) so it's safe to
bzero now.
* added casts in debug_sync.cc and sql_select.cc (for JOIN)
* move assignment method for MDL_request instead of memcpy()
* PARTIAL_INDEX_INTERSECT_INFO::init() instead of bzero()
* remove constructor from READ_RECORD() to make it trivial
* replace some memcpy() with c++ copy assignments
Make mysqltest to use --ps-protocol more
use prepared statements for everything that server supports
with the exception of CALL (for now).
Fix discovered test failures and bugs.
tests:
* PROCESSLIST shows Execute state, not Query
* SHOW STATUS increments status variables more than in text protocol
* multi-statements should be avoided (see tests with a wrong delimiter)
* performance_schema events have different names in --ps-protocol
* --enable_prepare_warnings
mysqltest.cc:
* make sure run_query_stmt() doesn't crash if there's
no active connection (in wait_until_connected_again.inc)
* prepare all statements that server supports
protocol.h
* Protocol_discard::send_result_set_metadata() should not send
anything to the client.
sql_acl.cc:
* extract the functionality of getting the user for SHOW GRANTS
from check_show_access(), so that mysql_test_show_grants() could
generate the correct column names in the prepare step
sql_class.cc:
* result->prepare() can fail, don't ignore its return value
* use correct number of decimals for EXPLAIN columns
sql_parse.cc:
* discard profiling for SHOW PROFILE. In text protocol it's done in
prepare_schema_table(), but in --ps it is called on prepare only,
so nothing was discarding profiling during execute.
* move the permission checking code for SHOW CREATE VIEW to
mysqld_show_create_get_fields(), so that it would be called during
prepare step too.
* only set sel_result when it was created here and needs to be
destroyed in the same block. Avoid destroying lex->result.
* use the correct number of tables in check_show_access(). Saying
"as many as possible" doesn't work when first_not_own_table isn't
set yet.
sql_prepare.cc:
* use correct user name for SHOW GRANTS columns
* don't ignore verbose flag for SHOW SLAVE STATUS
* support preparing REVOKE ALL and ROLLBACK TO SAVEPOINT
* don't ignore errors from thd->prepare_explain_fields()
* use select_send result for sending ANALYZE and EXPLAIN, but don't
overwrite lex->result, because it might be needed to issue execute-time
errors (select_dumpvar - too many rows)
sql_show.cc:
* check grants for SHOW CREATE VIEW here, not in mysql_execute_command
sql_view.cc:
* use the correct function to check privileges. Old code was doing
check_access() for thd->security_ctx, which is invoker's sctx,
not definer's sctx. Hide various view related errors from the invoker.
sql_yacc.yy:
* initialize lex->select_lex for LOAD, otherwise it'll contain garbage
data that happen to fail tests with views in --ps (but not otherwise).
This solves the following issues:
* unlike lex->m_sql_cmd and lex->sql_command, thd->query_plan_flags
is not reset in Prepared_statement::execute, it survives
till the log_slow_statement(), so slow logging behaves correctly in --ps
* using thd->query_plan_flags for both slow_log_filter and
log_slow_admin_statements means the definition of "admin" statements
for the slow log is the same no matter how it is filtered out.
Problem:- Create/drop index was logged into binlog.
Goal:- Operation on temporary table should not be binlog when binlog format
is row.
Solution:-
We should add CF_FORCE_ORIGINAL_BINLOG_FORMAT when there is ddl on temp
table.
For optimize, analyze, repair we wont change anything ,Then will
be logged in binlog , But they also dont throw any error if operation fails
Since slave wont be having any temp table , but these operation on tmp
table will be processed without breaking replication.
For rename we need a different logic MDEV-16728 will solve it.
Crash happened because in discover, table->work_part_info was not properly
reset before execution.
Fixed by resetting before calling execute alter table, create table or
mysql_create_frm_image.
Problem was that detection of temporary tables was all wrong for
RENAME TABLE.
(Temporary tables where opened by top level call to
open_temporary_tables(), which can't detect if a temporary table
was renamed to something and then reused).
Fixed by adding proper parsing of rename list to check against
the current name of a table at each rename stage.
Also change do_rename_temporary() to check against the current
state of temporary tables, not according to the state of start
of RENAME TABLE.
Fixed by extending unique_table() with a flag to not allow usage of
the replaced table.
I also cleaned up find_dup_table() to not use goto next.
I also added more comments to the code in find_dup_table()
The test was not deterministic and would occasionally fail, due to the
use of `sleep`.
This patch is a complete rewrite of the test using proper sync points.
These test can sporadically show mutex deadlock warnings between LOCK_wsrep_thd
and LOCK_thd_data mutexes. This means that these mutexes can be locked in opposite
order by different threads, and thus result in deadlock situation.
To fix such issue, the locking policy of these mutexes should be revised and
enforced to be uniform. However, a quick code review shows that the number of
lock/unlock operations for these mutexes combined is between 100-200, and all these
mutex invocations should be checked/fixed.
On the other hand, it turns out that LOCK_wsrep_thd is used for protecting access to
wsrep variables of THD (wsrep_conflict_state, wsrep_query_state), whereas LOCK_thd_data
protects query, db and mysys_var variables in THD. Extending LOCK_thd_data to protect
also wsrep variables looks like a viable solution, as there should not be a use case
where separate threads need simultaneous access to wsrep variables and THD data variables.
In this commit LOCK_wsrep_thd mutex is refactored to be replaced by LOCK_thd_data.
By bluntly replacing LOCK_wsrep_thd by LOCK_thd_data, will result in double locking
of LOCK_thd_data, and some adjustements have been performed to fix such situations.
Problem was that we did not delete explain information
when Galera must replay a query.
Could not find easily repeatable test case that would not
cause other problems.
The following changes are committed:
* `RESET MASTER` at the end of the test. This was necessary to allow the test
to run on repeated runs.
* `--source include/galera_wait_ready.inc` after setting `gmcast.isolate=0` to
get back to a primary component.
* Fix for assertion in `Protocol::end_statement()`. The assertion is due to
the fact that function `do_command()` calls `thd->protocol->end_statement()`,
without setting an error, when it is detected that galera is not ready yet.
Following line somehow disappeared in a past merge:
```
my_message(ER_UNKNOWN_COM_ERROR,
"WSREP has not yet prepared node for application use", MYF(0));
```
Remove clause on `thd->variables.wsrep_on` in the following code:
if (WSREP(thd))
{
...
if (thd->variables.wsrep_on &&
...
In the above snippet, `WSREP(thd)` already ensures thd->variables.wsrep_on
It doesn't make sense to allow selects from I_S but disallow selects
that don't use any tables at all, because any (disallowed) select that
doesn't use tables can be made allowed by adding
"FROM I_S.COLLATIONS LIMIT 1" to the end.
And it break mysql-test rather badly, even check-testcase.test
fails on its first `SELECT '$tmp' = 'No such row'`
This reverts 9a89614857, c5dd2abf4c, and 33028f7c4b:
Refs: MW-245 - changed logic so that in non primary node it is possible to do SET + SHOW + SELECT from information and pfs schema, when dirty reads are not enabled - however, non table selects are not allowed (e.g. SELECT 1)
Refs MW-245 - logic was wrong in detecting if queries are allowed in non primary node. it allowed select with no table list to execute even if dirty reads was not specified
Refs: MW-245 - Adjust tests to account for the new behavior.
Test MW-286 occasionally failed with error the following message:
```
safe_mutex: Found wrong usage of mutex 'LOCK_wsrep_thd' and 'LOCK_thd_kill'
Mutex currently locked (in reverse order):
LOCK_thd_kill mariadb-server/sql/sql_class.h line 3535
LOCK_wsrep_thd mariadb-server/sql/wsrep_thd.cc line 88
```
The fix consists in calling thd->reset_killed() in wsrep_mysql_parse() after
LOCK_wsrep_thd is unlocked. Which avoids the taking locks LOCK_wsrep_thd and
LOCK_thd_kill in reverse order.