- query->intersection fails to get freed if the query exceeds
innodb_ft_result_cache_limit
- errors from init_ftfuncs were not propogated by delete command
This is taken from percona/percona-server@ef2c0bcb9a
If UPDATE/DELETE does not change data it is skipped from
replication. We now force replication of such events when they trigger
partition auto-creation.
For ROLLBACK it is as simple as set OPTION_KEEP_LOG
flag. trans_cannot_safely_rollback() does the rest.
For UPDATE/DELETE .. LIMIT 0 we make additional binlog_query() calls
at the early points of return.
As a safety measure we also convert row format into statement if it is
needed. The condition is decided by
binlog_need_stmt_format(). Basically if there are some row events in
cache we don't need that: table open of row event will trigger
auto-creation anyway.
Multi-update/delete works via mysql_select(). There is no early points
of return, so binlogging is always checked by
send_eof()/abort_resultset(). But we must comply with the above
measure of converting into statement.
not every index-using plan sets bits in table->quick_keys.
QUICK_ROR_INTERSECT_SELECT, for example, doesn't.
Use the fact that select->quick is set instead.
Also allow EXPLAIN to work.
ER_TRUNCATED_WRONG_VALUE
Part 1: Fix for DELETE without ORDER BY
Analysis: m_current_row_for_warning doesn't increment and assumes default
value which is then used by ROW_NUMBER.
Fix: Increment m_current_row_for_warning for each processed row.
- Handle stored function conditions correctly, with the same logic as with UDFs.
- When running queries on Spider SE, by default, we do not push down WHERE conditions containing usage of UDFs/stored functions to remote data nodes, unless the user demands (by setting spider_use_pushdown_udf).
- Disable direct update/delete when a udf condition is skipped.
The problem is that array binding uses net buffer to read parameters for each
execution while each execiting with RETURNING write in the same buffer.
Solution is to allocate new net buffer to avoid changing buffer we are reading
from.
Both EXPLAIN and EXPLAIN EXTENDED statements produce different results set
in case it is run in normal way and in PS mode for the statements
UPDATE/DELETE with subquery.
The use case below reproduces the issue:
MariaDB [test]> CREATE TABLE t1 (c1 INT KEY) ENGINE=MyISAM;
Query OK, 0 rows affected (0,128 sec)
MariaDB [test]> CREATE TABLE t2 (c2 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,023 sec)
MariaDB [test]> CREATE TABLE t3 (c3 INT) ENGINE=MyISAM;
Query OK, 0 rows affected (0,021 sec)
MariaDB [test]> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | Impossible WHERE noticed after reading const tables
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,002 sec)
MariaDB [test]> PREPARE stmt FROM
-> EXPLAIN EXTENDED UPDATE t3 SET c3 =
-> ( SELECT COUNT(d1.c1) FROM ( SELECT a11.c1 FROM t1 AS a11
-> STRAIGHT_JOIN t2 AS a21 ON a21.c2 = a11.c1 JOIN t1 AS a12
-> ON a12.c1 = a11.c1 ) d1 );
Query OK, 0 rows affected (0,000 sec)
Statement prepared
MariaDB [test]> EXECUTE stmt;
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | filtered | Extra |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
| 1 | PRIMARY | t3 | ALL | NULL | NULL | NULL | NULL | 0 | 100.00 | |
| 2 | SUBQUERY | NULL | NULL | NULL | NULL | NULL | NULL | NULL | NULL | no matching row in const table |
+------+-------------+-------+------+---------------+------+---------+------+------+----------+--------------------------------+
2 rows in set (0,000 sec)
The reason by that different result sets are produced is that on execution
of the statement 'EXECUTE stmt' the flag SELECT_DESCRIBE not set
in the data member SELECT_LEX::options for instances of SELECT_LEX that
correspond to subqueries used in the UPDTAE/DELETE statements.
Initially, these flags were set on parsing the statement
PREPARE stmt FROM "EXPLAIN EXTENDED UPDATE t3 SET ..."
but latter they were reset before starting real execution of
the parsed query during handling the statement 'EXECUTE stmt';
So, to fix the issue the functions mysql_update()/mysql_delete()
have been modified to set the flag SELECT_DESCRIBE forcibly
in the data member SELECT_LEX::options for the primary SELECT_LEX
of the UPDATE/DELETE statement.
The ROWNUM() function is for SELECT mapped to JOIN->accepted_rows, which is
incremented for each accepted rows.
For Filesort, update, insert, delete and load data, we map ROWNUM() to
internal variables incremented when the table is changed.
The connection between the row counter and Item_func_rownum is done
in sql_select.cc::fix_items_after_optimize() and
sql_insert.cc::fix_rownum_pointers()
When ROWNUM() is used anywhere in query, the optimization to ignore ORDER
BY in sub queries are disabled. This was done to get the following common
Oracle query to work:
select * from (select * from t1 order by a desc) as t where rownum() <= 2;
MDEV-3926 "Wrong result with GROUP BY ... WITH ROLLUP" contains a discussion
about this topic.
LIMIT optimization is enabled when in a top level WHERE clause comparing
ROWNUM() with a numerical constant using any of the following expressions:
- ROWNUM() < #
- ROWNUM() <= #
- ROWNUM() = 1
ROWNUM() can be also be the right argument to the comparison function.
LIMIT optimization is done in two cases:
- For the current sub query when the ROWNUM comparison is done on the top
level:
SELECT * from t1 WHERE rownum() <= 2 AND t1.a > 0
- For an inner sub query, when the upper level has only a ROWNUM comparison
in the WHERE clause:
SELECT * from (select * from t1) as t WHERE rownum() <= 2
In Oracle mode, one can also use ROWNUM without parentheses.
Other things:
- Fixed bug where the optimizer tries to optimize away sub queries
with RAND_TABLE_BIT set (non-deterministic queries). Now these
sub queries will not be converted to joins. This bug fix was also
needed to get rownum() working inside subqueries.
- In remove_const() remove setting simple_order to FALSE if ROLLUP is
USED. This code was disable a long time ago because of wrong assignment
in the following code. Instead we set simple_order to false if
RAND_TABLE_BIT was used in the SELECT list. This ensures that
we don't delete ORDER BY if the result set is not deterministic, like
in 'SELECT RAND() AS 'r' FROM t1 ORDER BY r';
- Updated parameters for Sort_param::init_for_filesort() to be able
to provide filesort with information where the number of accepted
rows should be stored
- Reordered fields in class Filesort to optimize storage layout
- Added new error messsage to tell that a function can't be used in HAVING
- Added field 'with_rownum' to THD to mark that ROWNUM() is used in the
query.
Co-author: Oleksandr Byelkin <sanja@mariadb.com>
LIMIT optimization for sub query
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
Before this patch mergeable derived tables / view used in a multi-table
update / delete were merged before the preparation stage.
When the merge of a derived table / view is performed the on expression
attached to it is fixed and ANDed with the where condition of the select S
containing this derived table / view. It happens after the specification of
the derived table / view has been merged into S. If the ON expression refers
to a non existing field an error is reported and some other mergeable derived
tables / views remain unmerged. It's not a problem if the multi-table
update / delete statement is standalone. Yet if it is used in a stored
procedure the select with incompletely merged derived tables / views may
cause a problem for the second call of the procedure. This does not happen
for select queries using derived tables / views, because in this case their
specifications are merged after the preparation stage at which all ON
expressions are fixed.
This patch makes sure that merging of the derived tables / views used in a
multi-table update / delete statement is performed after the preparation
stage.
Approved by Oleksandr Byelkin <sanja@mariadb.com>
First part of the fix (row0mysql.cc) addresses external columns when adding history
row on referential action. The full data must be retrieved before the
row is inserted.
Second part of the fix (the rest) avoids duplicate primary key error between
the history row generated on referential action and the history row
generated by SQL command. Both command and referential action can
happen on same table since foreign key can be self-reference (parent
and child tables are same). Moreover, the self-reference can refer
multiple rows when the key is non-unique. In such case history is
generated by referential action occured on first row but processed all
rows by a matched key. The second round is when the next row is
processed by a command but history already exists. In such case we
check TRX_ID of existing history row and if it is the same we assume
the above situation and skip adding one more history row or failing
the command.
