Files for PAGE_COMPRESSED tables that were created with
innodb_checksum_algorithm=full_crc32 store the value of
innodb_compression_algorithm at the time of the file creation.
The server-wide setting of innodb_compression_algorithm
may be changed after file creation. We must ignore any mismatch
when opening a data file, and for writes, we must use the
choice of algorithm that is stored in the file.
fil_space_t::is_flags_full_crc32_equal(): Ignore the
innodb_compression_algorithm but do compare innodb_page_size.
fil_space_t::is_flags_non_full_crc32_equal(): Ignore the
innodb_compression_algorithm.
Try to use more deterministic floating-point operations.
Apparently, 2.2 > 2.2 wrongly holds on many platforms, but
not ppc64le on the compiler used on Red Had Enterprise Linux 8.
The reason could be an infinite binary presentation:
2.2 = 0b10.001100110011…
With t1_f = 2.5 = 0b10.1, t1_f > 2.5 would no longer hold on AMD64.
Let us replace the 2.2 with 2.5 and compare t1_f >= 2.5 in order to
get more consistent results across all platforms.
We were missing a test that would exercise trx_free_prepared()
with innodb_fast_shutdown=0. Add a test.
Note: if shutdown hangs due to the XA PREPARE transactions,
in MariaDB 10.2 the test would unfortunately pass, but take
2*60 seconds longer, because of two shutdown_server statements
timing out after 60 seconds. Starting with MariaDB 10.3, the
hung server would be killed with SIGABRT, and the test could
fail thanks to a backtrace message.
get_col_list_to_be_dropped() incorrectly returned uninteresting instantly
dropped column which was missing in a new dict_index_t
get_col_list_to_be_dropped(): rename to collect_columns_from_dropped_indexes
and stop return dropped columns
This allows one to run the test suite even if any of the following
options are changed:
- character-set-server
- collation-server
- join-cache-level
- log-basename
- max-allowed-packet
- optimizer-switch
- query-cache-size and query-cache-type
- skip-name-resolve
- table-definition-cache
- table-open-cache
- Some innodb options
etc
Changes:
- Don't print out the value of system variables as one can't depend on
them to being constants.
- Don't set global variables to 'default' as the default may not
be the same as the test was started with if there was an additional
option file. Instead save original value and reset it at end of test.
- Test that depends on the latin1 character set should include
default_charset.inc or set the character set to latin1
- Test that depends on the original optimizer switch, should include
default_optimizer_switch.inc
- Test that depends on the value of a specific system variable should
set it in the test (like optimizer_use_condition_selectivity)
- Split subselect3.test into subselect3.test and subselect3.inc to
make it easier to set and reset system variables.
- Added .opt files for test that required specfic options that could
be changed by external configuration files.
- Fixed result files in rockdsb & tokudb that had not been updated for
a while.
row_upd_build_difference_binary(): Correctly handle the
case where columns (or clustered index fields) have been added
since the 'entry' was originally created. In this case,
the update vector must replace any missing columns with the
default values of the instantly added columns.
The test occasionally fails with different table reference count
due to purge activity after INSERT operations (MDEV-12288).
Wait for purge before accessing dict_table_t::n_ref_count.
- Note that some issues was also fixed in 10.2 and 10.4. I also fixed them
here to be able to continue with making 10.5 valgrind safe again
- Disable connection threads warnings when doing shutdown
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
ha_innobase::open(): Always ignore problems with FOREIGN KEY constraints
(pass DICT_ERR_IGNORE_FK_NOKEY), no matter whether foreign_key_checks
is enabled. Instead, we must report errors when enforcing the FOREIGN KEY
constraints. As a result of ignoring these errors, the tables will be
loaded with dict_foreign_t objects whose foreign_index or referenced_index
will be NULL.
Also, pass DICT_ERR_IGNORE_FK_NOKEY instead of DICT_ERR_IGNORE_NONE
to dict_table_open_on_id_low() in many other cases. Notably, on
CREATE TABLE and ALTER TABLE, we will keep validating the FOREIGN KEY
constraints as before.
dict_table_open_on_name(): If no other flags than
DICT_ERR_IGNORE_FK_NOKEY are set, refuse access to unreadable tables.
Some encryption tests rely on this code path.
For the DML code path, we used to have the problem that when
one of the indexes was missing in dict_foreign_t, we would ignore
the FOREIGN KEY constraint altogether. The following changes
address that.
row_ins_check_foreign_constraints(): Add the parameter pk.
For the primary key, consider also foreign key constraints for which
foreign->foreign_index=NULL (no underlying index is available).
row_ins_check_foreign_constraint(): Report errors also for !check_ref.
Remove a redundant check for srv_read_only_mode.
row_ins_foreign_report_add_err(): Tolerate foreign->foreign_index=NULL.
Let us invoke wait_all_purged.inc right before the workload.
Starting with MDEV-12288 in MariaDB Server 10.3, also INSERT
generates purge workload. If we do not ensure that purge has
run to completion, the results on 10.3 and later could be
nondeterministic.
Stabilize the test:
- replace Rows column in EXPLAIN output for one query
- Use EITS statistics for another query (in that testcase, the
query must use LooseScan)
Optimize the test by dropping the table early and by using only
one undo log thread, so that purge will be doing more useful work
and less busy work of suspending and resuming the worker threads.
The test used to cause shutdown timeout on 10.4 on buildbot, and
for me locally when using --mysqld=--innodb-sync-debug.
With these tweaks, it passes for me with --mysqld=--innodb-sync-debug.
If there're multiple row versions in InnoDB, reading one row from PK
may have O(N) complexity and reading from secondary keys may have
O(N^2) complexity.
The problem occurs when there are many pending versions of the same
row, meaning that the primary key is the same, but a secondary key is
different. The slowdown occurs when the secondary index is
traversed. This patch creates a helper class for the function
row_sel_get_clust_rec_for_mysql() which can remember and re-use
cached_clust_rec & cached_old_vers so that rec_get_offsets() does not
need to be called over and over for the clustered record.
Corrections by Kevin Lewis <kevin.lewis@oracle.com>
MDEV-20341 Unstable innodb.innodb_bug14704286
Removed test that tested the ability of interrupting long query which
is not long anymore.
Starting with MDEV-12288 in MariaDB Server 10.3,
the transaction identifiers on records will be reset on purge.
Because purge might or might not run to completion before shutdown,
it could happen that the bogus transaction identifier that our
test is writing will be reset by purge after restart, and the
expected warning message on SELECT will fail to appear.
We resolve the race condition by ensuring that purge runs to
completion before the shutdown.
Use DEBUG_SYNC to hang the execution at the interesting point,
and then kill and restart the server externally. This will work
also with Valgrind. DBUG_SUICIDE() causes Valgrind to hang,
and it could also cause uninteresting reports about memory leaks.
While we are at it, let us clean up innodb.innodb_bulk_create_index_debug
so that it will actually test the desired functionality also in future
versions (with instant ADD COLUMN and DROP COLUMN) and avoid
some unnecessary restarts.
We are adding two DEBUG_SYNC points for ALTER TABLE, because there were
none that would be executed right before ha_commit_trans().
Skip the test on big-endian systems.
In MariaDB Server 10.0 and 10.1 (as well as MySQL 5.6),
the implementation of innodb_checksum_algorithm=crc32
wrongly assumes little-endian byte order.
MDEV-17614 flags INSERT…ON DUPLICATE KEY UPDATE unsafe for statement-based
replication when there are multiple unique indexes. This correctly fixes
something whose attempted fix in MySQL 5.7
in mysql/mysql-server@c93b0d9a97
caused lock conflicts. That change was reverted in MySQL 5.7.26
in mysql/mysql-server@066b6fdd43
(with a substantial amount of other changes).
In MDEV-17073 we already disabled the unfortunate MySQL change when
statement-based replication was not being used. Now, thanks to MDEV-17614,
we can actually remove the change altogether.
This reverts commit 8a346f31b9 (MDEV-17073)
and mysql/mysql-server@c93b0d9a97 while
keeping the test cases.
