away.
During optimization stage the WHERE conditions can be changed or even
be removed at all if they know for sure to be true of false. Thus they aren't
showed in the EXPLAIN EXTENDED which prints conditions after optimization.
Now if all elements of an Item_cond were removed this Item_cond is substituted
for an Item_int with the int value of the Item_cond.
If there were conditions that were totally optimized away then values of the
saved cond_value and having_value will be printed instead.
fixes).
The legend: on a replication slave, in case a trigger creation
was filtered out because of application of replicate-do-table/
replicate-ignore-table rule, the parsed definition of a trigger was not
cleaned up properly. LEX::sphead member was left around and leaked
memory. Until the actual implementation of support of
replicate-ignore-table rules for triggers by the patch for Bug 24478 it
was never the case that "case SQLCOM_CREATE_TRIGGER"
was not executed once a trigger was parsed,
so the deletion of lex->sphead there worked and the memory did not leak.
The fix:
The real cause of the bug is that there is no 1 or 2 places where
we can clean up the main LEX after parse. And the reason we
can not have just one or two places where we clean up the LEX is
asymmetric behaviour of MYSQLparse in case of success or error.
One of the root causes of this behaviour is the code in Item::Item()
constructor. There, a newly created item adds itself to THD::free_list
- a single-linked list of Items used in a statement. Yuck. This code
is unaware that we may have more than one statement active at a time,
and always assumes that the free_list of the current statement is
located in THD::free_list. One day we need to be able to explicitly
allocate an item in a given Query_arena.
Thus, when parsing a definition of a stored procedure, like
CREATE PROCEDURE p1() BEGIN SELECT a FROM t1; SELECT b FROM t1; END;
we actually need to reset THD::mem_root, THD::free_list and THD::lex
to parse the nested procedure statement (SELECT *).
The actual reset and restore is implemented in semantic actions
attached to sp_proc_stmt grammar rule.
The problem is that in case of a parsing error inside a nested statement
Bison generated parser would abort immediately, without executing the
restore part of the semantic action. This would leave THD in an
in-the-middle-of-parsing state.
This is why we couldn't have had a single place where we clean up the LEX
after MYSQLparse - in case of an error we needed to do a clean up
immediately, in case of success a clean up could have been delayed.
This left the door open for a memory leak.
One of the following possibilities were considered when working on a fix:
- patch the replication logic to do the clean up. Rejected
as breaks module borders, replication code should not need to know the
gory details of clean up procedure after CREATE TRIGGER.
- wrap MYSQLparse with a function that would do a clean up.
Rejected as ideally we should fix the problem when it happens, not
adjust for it outside of the problematic code.
- make sure MYSQLparse cleans up after itself by invoking the clean up
functionality in the appropriate places before return. Implemented in
this patch.
- use %destructor rule for sp_proc_stmt to restore THD - cleaner
than the prevoius approach, but rejected
because needs a careful analysis of the side effects, and this patch is
for 5.0, and long term we need to use the next alternative anyway
- make sure that sp_proc_stmt doesn't juggle with THD - this is a
large work that will affect many modules.
Cleanup: move main_lex and main_mem_root from Statement to its
only two descendants Prepared_statement and THD. This ensures that
when a Statement instance was created for purposes of statement backup,
we do not involve LEX constructor/destructor, which is fairly expensive.
In order to track that the transformation produces equivalent
functionality please check the respective constructors and destructors
of Statement, Prepared_statement and THD - these members were
used only there.
This cleanup is unrelated to the patch.
Post fix for bug#23800.
The Item_field constructor now increases the select_n_where_fields counter.
sql_yacc.yy:
Post fix for bug#23800.
Take into account fields that might be added by subselects.
sql_lex.h:
Post fix for bug#23800.
Added the select_n_where_fields variable to the st_select_lex class.
sql_lex.cc:
Post fix for bug#23800.
Initialization of the select_n_where_fields variable.
created for sorting.
Any outer reference in a subquery was represented by an Item_field object.
If the outer select employs a temporary table all such fields should be
replaced with fields from that temporary table in order to point to the
actual data. This replacement wasn't done and that resulted in a wrong
subquery evaluation and a wrong result of the whole query.
Now any outer field is represented by two objects - Item_field placed in the
outer select and Item_outer_ref in the subquery. Item_field object is
processed as a normal field and the reference to it is saved in the
ref_pointer_array. Thus the Item_outer_ref is always references the correct
field. The original field is substituted for a reference in the
Item_field::fix_outer_field() function.
New function called fix_inner_refs() is added to fix fields referenced from
inner selects and to fix references (Item_ref objects) to these fields.
The new Item_outer_ref class is a descendant of the Item_direct_ref class.
It additionally stores a reference to the original field and designed to
behave more like a field.
fails
The bug was introduced with the push of the fix for bug#20953: after
the error on view creation we never reset the error state, so some
valid statements would give the same error after that.
The solution is to properly reset the error state.
Two problems here:
Problem 1:
While constructing the join columns list the optimizer does as follows:
1. Sets the join_using_fields/natural_join members of the right JOIN
operand.
2. Makes a "table reference" (TABLE_LIST) to parent the two tables.
3. Assigns the join_using_fields/is_natural_join of the wrapper table
using join_using_fields/natural_join of the rightmost table
4. Sets join_using_fields to NULL for the right JOIN operand.
5. Passes the parent table up to the same procedure on the upper
level.
Step 1 overrides the the join_using_fields that are set for a nested
join wrapping table in step 4.
Fixed by making a designated variable SELECT_LEX::prev_join_using to
pass the data from step 1 to step 4 without destroying the wrapping
table data.
Problem 2:
The optimizer checks for ambiguous columns while transforming
NATURAL JOIN/JOIN USING to JOIN ON. While doing that there was no
distinction between columns that are used in the generated join
condition (where ambiguity can be checked) and the other columns
(where ambiguity can be checked only when resolving references
coming from outside the JOIN construct itself).
Fixed by allowing the non-USING columns to be present in multiple
copies in both sides of the join and moving the ambiguity check
to the place where unqualified references to the join columns are
resolved (find_field_in_natural_join()).
- Make the code produce correct result: use an array of triggers to turn on/off equalities for each
compared column. Also turn on/off optimizations based on those equalities.
- Make EXPLAIN output show "Full scan on NULL key" for tables for which we switch between
ref/unique_subquery/index_subquery and ALL access.
- index_subquery engine now has HAVING clause when it is needed, and it is
displayed in EXPLAIN EXTENDED
- Fix incorrect presense of "Using index" for index/unique-based subqueries (BUG#22930)
// bk trigger note: this commit refers to BUG#24127
Currently in the ONLY_FULL_GROUP_BY mode no hidden fields are allowed in the
select list. To ensure this each expression in the select list is checked
to be a constant, an aggregate function or to occur in the GROUP BY list.
The last two requirements are wrong and doesn't allow valid expressions like
"MAX(b) - MIN(b)" or "a + 1" in a query with grouping by a.
The correct check implemented by the patch will ensure that:
any field reference in the [sub]expressions of the select list
is under an aggregate function or
is mentioned as member of the group list or
is an outer reference or
is part of the select list element that coincide with a grouping element.
The Item_field objects now can contain the position of the select list
expression which they belong to. The position is saved during the
field's Item_field::fix_fields() call.
The non_agg_fields list for non-aggregated fields is added to the SELECT_LEX
class. The SELECT_LEX::cur_pos_in_select_list now contains the position in the
select list of the expression being currently fixed.
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
Bug#4968 "Stored procedure crash if cursor opened on altered table"
Bug#19733 "Repeated alter, or repeated create/drop, fails"
Bug#19182 "CREATE TABLE bar (m INT) SELECT n FROM foo; doesn't work from
stored procedure."
Bug#6895 "Prepared Statements: ALTER TABLE DROP COLUMN does nothing"
Bug#22060 "ALTER TABLE x AUTO_INCREMENT=y in SP crashes server"
Test cases for bugs 4968, 19733, 6895 will be added in 5.0.
Re-execution of CREATE DATABASE, CREATE TABLE and ALTER TABLE
statements in stored routines or as prepared statements caused
incorrect results (and crashes in versions prior to 5.0.25).
In 5.1 the problem occured only for CREATE DATABASE, CREATE TABLE
SELECT and CREATE TABLE with INDEX/DATA DIRECTOY options).
The problem of bugs 4968, 19733, 19282 and 6895 was that functions
mysql_prepare_table, mysql_create_table and mysql_alter_table were not
re-execution friendly: during their operation they used to modify contents
of LEX (members create_info, alter_info, key_list, create_list),
thus making the LEX unusable for the next execution.
In particular, these functions removed processed columns and keys from
create_list, key_list and drop_list. Search the code in sql_table.cc
for drop_it.remove() and similar patterns to find evidence.
The fix is to supply to these functions a usable copy of each of the
above structures at every re-execution of an SQL statement.
To simplify memory management, LEX::key_list and LEX::create_list
were added to LEX::alter_info, a fresh copy of which is created for
every execution.
The problem of crashing bug 22060 stemmed from the fact that the above
metnioned functions were not only modifying HA_CREATE_INFO structure in
LEX, but also were changing it to point to areas in volatile memory of
the execution memory root.
The patch solves this problem by creating and using an on-stack
copy of HA_CREATE_INFO (note that code in 5.1 already creates and
uses a copy of this structure in mysql_create_table()/alter_table(),
but this approach didn't work well for CREATE TABLE SELECT statement).
