BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:
Case #1: N-changes executed within a transaction would go into
the S-cache. When later in the same transaction a
T-change occurs, N-changes following it were written
to the T-cache instead of the S-cache. In some cases,
this raises problems. For example, a
Table_map_log_event being written initially into the
S-cache, together with the initial N-changes, would be
absent from the T-cache. This would log N-changes
orphaned from a Table_map_log_event (thence discarded
at the slave). (MIXED and ROW)
Case #2: When rolling back a transaction, the N-changes that
might be in the T-cache were disregarded and
truncated along with the T-changes. (MIXED and ROW)
Case #3: When a MIXED statement (TN) is ahead of any other
T-changes in the transaction and it fails, it is kept
in the T-cache until the transaction ends. This is
not the case in 5.1 or Betony (5.5.2). In these, the
failed TN statement would be written to the binlog at
the same instant it had failed and not deferred until
transaction end. (SBR)
To fix these problems, we have decided to do what follows:
For Case #1 and #2, we circumvent them:
1. by not letting binlog_direct_non_transactional_updates
affect MIXED and RBR. These modes will keep the behavior
provided by WL#2687. Although this will make Celosia to
behave differently from 5.1, an execution will be always
safe under such modes in the sense that slaves will never
go out sync. In 5.1, using either MIXED or ROW while
mixing N-statements and T-statements was not safe.
For Case #3, we don't actually fix it. We:
1. keep it and make all MIXED statements whether they end
up failing or not or whether they are up front in the
transaction or after some transactional change to always
be stored in the T-cache. This means that it is written
to the binary log on transaction commit/rollback only.
2. We make the warning message even more specific about the
MIXED statement and SBR.
mysql-test/extra/rpl_tests/rpl_mixing_engines.test:
Updated the test case to avoid checking inconsistencies between the master and slave
when session.binlog_direct_non_transactional_updates is ON and the format is statement.
In this scenario, they will diverge because a counter (within a triger) is incremented
and associated to the issued statement. However, an n-statement is logged ahead of
the transaction and thus is not executed by the same order in the slave and thus gets
a different value from the counter.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/ndb/r/ndb_binlog_format.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_concurrency_error.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_mixing_engines.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result:
Updated the test case with the new error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/log.cc:
Checked if either a trx-cache or a non-trx-cache should be used.
If bin_log_direct_non_trans_update is active or the format is either
MIXED or ROW, the cache to be used depends on the flag is_transactional.
When the format is STMT, the non-trx-cache should be used if the statement
is non-transactional and the trx-cache is empty, i.e. if any transactional
statement has not committed yet. Otherwise, the trx-cache should be used.
sql/share/errmsg-utf8.txt:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_class.cc:
Started printing ER_BINLOG_UNSAFE_MIXED_STATEMENT, when there
is a mixed-statement.
Organized the names of the variables and added comments.
sql/sql_lex.cc:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
sql/sql_lex.h:
Added the new unsafe error ER_BINLOG_UNSAFE_MIXED_STATEMENT.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
DBUG_SYNC_POINT has at least one strong limitation that it's not defined
on all platforms. It has issues cooperating with @@debug.
All in all its functionality is superseded by DEBUG_SYNC facility and
there is no reason to maintain the old less flexible one.
Fixed with adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code and re-writing existing simulations
(found 3) to use it.
Couple of tests have been reworked as well.
The patch offers a pattern for setting sync-points in replication threads
where the standard DEBUG_SYNC does not suffice to reach goals.
mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
a pattern of usage DEBUG_SYNC for replication testing is provided.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
results are changed.
mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based;
limiting the test to run only with MIXED binlog-format as the test last
some 10 secs sensitively contributing to the total of tests run.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
rewriting the test from GET_LOCK()-based to DEBUG_SYNC-based.
sql/debug_sync.cc:
adding debug_sync_set_action() function as a facility to set up
a sync-action in the server sources code.
sql/debug_sync.h:
externalizing debug_sync_set_action().
sql/item_func.cc:
purging sources from DBUG_SYNC_POINT.
sql/mysql_priv.h:
purging sources from DBUG_SYNC_POINT.
sql/slave.cc:
rewriting failure simulations to base on DEBUG_SYNC rather than GET_LOCK()-based DBUG_SYNC_POINT.
sql/sql_repl.cc:
removing an orphan failure simulation line because no counterpart in tests existing.
mysql-test/t/disabled.def:
Restore disabled ssl tests: SSL certificates were updated.
Disable sp_sync.test, the test case can't work in next-4284.
mysql-test/t/partition_innodb.test:
Disable parsing of the test case for Bug#47343,
the test can not work in next-4284.
mysql-test/t/ps_ddl.test:
Update results (CREATE TABLE IF NOT EXISTS takes
into account existence of the temporary table).
Original revision:
------------------------------------------------------------
revision-id: li-bing.song@sun.com-20100130124925-o6sfex42b6noyc6x
parent: joro@sun.com-20100129145427-0n79l9hnk0q43ajk
committer: <Li-Bing.Song@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Sat 2010-01-30 20:49:25 +0800
message:
Bug #48321 CURRENT_USER() incorrectly replicated for DROP/RENAME USER;
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
------------------------------------------------------------
Conflicts:
- mysql-test/r/mysqld--help-win.result
- sql/sys_vars.cc
Original revsion (in next-mr-bugfixing):
------------------------------------------------------------
revno: 2971 [merge]
revision-id: alfranio.correia@sun.com-20100121210527-rbuheu5rnsmcakh1
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 21:05:27 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
------------------------------------------------------------
revno: 2970.1.1
revision-id: alfranio.correia@sun.com-20100121131034-183r4qdyld7an5a0
parent: alik@sun.com-20100121083914-r9rz2myto3tkdya0
committer: Alfranio Correia <alfranio.correia@sun.com>
branch nick: mysql-next-mr-bugfixing
timestamp: Thu 2010-01-21 13:10:34 +0000
message:
BUG#46364 MyISAM transbuffer problems (NTM problem)
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
Besides, it is used to enable the WL#2687 which is disabled by default.
REVOKE/GRANT; ALTER EVENT.
The following statements support the CURRENT_USER() where a user is needed.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENT
but, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, All above statements are rewritten when they are binlogged.
The CURRENT_USER() is expanded to the real user's name and host.
When using MyIsam tables and processing concurrent DML
statements, the server may be sending back an OK to the client
before actually finishing the transaction commit procedure. This
has been reported before in BUG@37521 and BUG@29334.
This particular test case gets affected, because it performs the
following sequence:
connect (conn2, ...)
connection conn2;
LOAD DATA CONCURRENT ...
disconnect (conn2, ...)
connection master;
sync_slave_with_master
diff_tables
At this point diff_tables may report difference in the table
content (the master seems to be missing the conn2 rows).
To workaround this MyISAM concurrent DML statements issue and
make this test case deterministic, we wait on conn2 until the
rows inserted show up in the table. After this the test case
proceeds as normally would before this patch.
In RBR, DDL statement will change binlog format to non row-based
format before it is binlogged, but the binlog format was not be
restored, and then manipulating a temporary table can not reset binlog
format to row-based format rightly. So that the manipulated statement
is binlogged with statement-based format.
To fix the problem, restore the state of binlog format after the DDL
statement is binlogged.
mysql-test/extra/rpl_tests/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist'.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Correct the test result, all the above binlog event
should be row-based after the bug49132 is fixed IN RBR.
mysql-test/suite/ndb/r/ndb_tmp_table_and_DDL.result:
Test result for bug#49132 base on ndb engine.
mysql-test/suite/ndb/t/ndb_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on ndb engine.
mysql-test/suite/rpl/r/rpl_tmp_table_and_DDL.result:
Test result for bug#49132 base on myisam engine.
mysql-test/suite/rpl/t/rpl_tmp_table_and_DDL.test:
Added the test file to verify if executing DDL statement before
trying to manipulate a temporary table causes row-based replication
to break with error 'table does not exist' base on myisam engine.
sql/event_db_repository.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/events.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sp.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_acl.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
sql/sql_udf.cc:
Added code to restore the state of binlog format after the DDL
statement is binlogged.
cant find record
Some engines return data for the record. Despite the fact that
the null bit is set for some fields, their old value may still in
the row. This can happen when unpacking an AI from the binlog on
top of a previous record in which a field is set to NULL, which
previously contained a value. Ultimately, this may cause the
comparison of records to fail when the slave is doing an index or
range scan.
We fix this by deploying a call to reset() for each field that is
set to null while unpacking a row from the binary log.
Furthermore, we also add mixed mode test case to cover the
scenario where updating and setting a field to null through a
Query event and later searching it through a rows event will
succeed.
Finally, we also change the reset() method, from Field_bit class,
so that it takes into account bits stored among the null bits and
not only the ones stored in the record.
mysql-test/suite/rpl/t/rpl_set_null_innodb.test:
InnoDB test.
mysql-test/suite/rpl/t/rpl_set_null_myisam.test:
MyISAM test.
mysql-test/suite/rpl_ndb/t/rpl_ndb_set_null.test:
NDB test.
sql/field.h:
Changed reset so that it also clears the bits
among the null_bits for the Field_bit class.
sql/rpl_record.cc:
Resetting field after setting it to null when unpacking
row.
It is well-known that due to concurrency issues, a slave can become
inconsistent when a transaction contains updates to both transaction and
non-transactional tables in statement and mixed modes.
In a nutshell, the current code-base tries to preserve causality among the
statements by writing non-transactional statements to the txn-cache which
is flushed upon commit. However, modifications done to non-transactional
tables on behalf of a transaction become immediately visible to other
connections but may not immediately get into the binary log and therefore
consistency may be broken.
In general, it is impossible to automatically detect causality/dependency
among statements by just analyzing the statements sent to the server. This
happen because dependency may be hidden in the application code and it is
necessary to know a priori all the statements processed in the context of
a transaction such as in a procedure. Moreover, even for the few cases that
we could automatically address in the server, the computation effort
required could make the approach infeasible.
So, in this patch we introduce the option
- "--binlog-direct-non-transactional-updates" that can be used to bypass
the current behavior in order to write directly to binary log statements
that change non-transactional tables.
mysql-test/extra/rpl_tests/rpl_mixing_engines.inc:
Backported this from Celosia to improve the test cases related to the NTM issue.
sql/log.cc:
Checks the --binlog-direct-non-transactional-updates before choosing
to either use the trxn-cache or not.
sql/mysqld.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/set_var.cc:
Introduces the option --binlog-direct-non-transactional-updates.
sql/sql_class.h:
Introduces the option --binlog-direct-non-transactional-updates.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_servers.cc
Text conflict in sql/sql_update.cc
Text conflict in support-files/mysql.spec.sh
Problem: When RAND() is binlogged in statement mode, the seed is
binlogged too, so the replication slave generates the same
sequence of random numbers. This makes replication work in many
cases, but not in all cases: the order of rows is not guaranteed
for, e.g., UPDATE or INSERT...SELECT statements, so the row data
will be different if master and slave retrieve the rows in
different orders.
Fix: Mark RAND() as unsafe. It will generate a warning if
binlog_format=STATEMENT and switch to row-logging if
binlog_format=ROW.
mysql-test/extra/rpl_tests/rpl_row_func003.test:
updated test case to ignore new warnings
mysql-test/suite/binlog/r/binlog_unsafe.result:
updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
Added test for RAND().
Also clarified some old comments.
mysql-test/suite/rpl/r/rpl_misc_functions.result:
updated result file
mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result:
updated test case to ignore new warnings
mysql-test/suite/rpl/r/rpl_optimize.result:
updated result file
mysql-test/suite/rpl/r/rpl_row_func003.result:
updated result file
mysql-test/suite/rpl/t/rpl_misc_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_optimize.test:
updated test case to ignore new warnings
mysql-test/suite/rpl/t/rpl_trigger.test:
updated test case to ignore new warnings
mysql-test/suite/rpl_ndb/r/rpl_ndb_func003.result:
updated result file
sql/item_create.cc:
Mark RAND() unsafe.
Conflicts:
Text conflict in .bzr-mysql/default.conf
Text conflict in mysql-test/extra/rpl_tests/rpl_loaddata.test
Text conflict in mysql-test/r/mysqlbinlog2.result
Text conflict in mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result
Text conflict in mysql-test/suite/binlog/r/binlog_unsafe.result
Text conflict in mysql-test/suite/rpl/r/rpl_insert_id.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result
Text conflict in mysql-test/suite/rpl/r/rpl_udf.result
Text conflict in mysql-test/suite/rpl/t/rpl_slow_query_log.test
Text conflict in sql/field.h
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysql_priv.h
Text conflict in sql/share/errmsg.txt
Text conflict in sql/sp.cc
Text conflict in sql/sql_acl.cc
Text conflict in sql/sql_base.cc
Text conflict in sql/sql_class.h
Text conflict in sql/sql_db.cc
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_insert.cc
Text conflict in sql/sql_lex.cc
Text conflict in sql/sql_lex.h
Text conflict in sql/sql_load.cc
Text conflict in sql/sql_table.cc
Text conflict in sql/sql_update.cc
Text conflict in sql/sql_view.cc
Conflict adding files to storage/innobase. Created directory.
Conflict because storage/innobase is not versioned, but has versioned children. Versioned directory.
Conflict adding file storage/innobase. Moved existing file to storage/innobase.moved.
Conflict adding files to storage/innobase/handler. Created directory.
Conflict because storage/innobase/handler is not versioned, but has versioned children. Versioned directory.
Contents conflict in storage/innobase/handler/ha_innodb.cc
Metadata for geometric fields was not being properly stored by
the slave in its the table definition. This happened because
MYSQL_TYPE_GEOMETRY was not included in the 'switch... case' that
handles field metadata according to the field type. Therefore, it
would default to 0, leading to always have a mismatch between
master's field and slave fields'.
We fix this by deploying the missing 'case MYSQL_TYPE_GEOMETRY:'.
mysql-test/extra/rpl_tests/type_conversions.test:
Added some tests for blob fields and also the particular
case for replicating from/into BLOB into/from GEOMETRY.
sql/field.h:
As requested by Mats, reverted function added by him in
changeset:
http://lists.mysql.com/commits/95313
Bug#16565 mysqld --help --verbose does not order variablesBug#20413 sql_slave_skip_counter is not shown in show variables
Bug#20415 Output of mysqld --help --verbose is incomplete
Bug#25430 variable not found in SELECT @@global.ft_max_word_len;
Bug#32902 plugin variables don't know their names
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#34829 No default value for variable and setting default does not raise error
Bug#34834 ? Is accepted as a valid sql mode
Bug#34878 Few variables have default value according to documentation but error occurs
Bug#34883 ft_boolean_syntax cant be assigned from user variable to global var.
Bug#37187 `INFORMATION_SCHEMA`.`GLOBAL_VARIABLES`: inconsistent status
Bug#40988 log_output_basic.test succeeded though syntactically false.
Bug#41010 enum-style command-line options are not honoured (maria.maria-recover fails)
Bug#42103 Setting key_buffer_size to a negative value may lead to very large allocations
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#44797 plugins w/o command-line options have no disabling option in --help
Bug#46314 string system variables don't support expressions
Bug#46470 sys_vars.max_binlog_cache_size_basic_32 is broken
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#47212 Crash in DBUG_PRINT in mysqltest.cc when trying to print octal number
Bug#48758 mysqltest crashes on sys_vars.collation_server_basic in gcov builds
Bug#49417 some complaints about mysqld --help --verbose output
Bug#49540 DEFAULT value of binlog_format isn't the default value
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
Bug#49646 mysql --show-warnings crashes when server dies
CMakeLists.txt:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
client/mysql.cc:
don't crash with --show-warnings when mysqld dies
config/ac-macros/plugins.m4:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
include/my_getopt.h:
comments
include/my_pthread.h:
fix double #define
mysql-test/mysql-test-run.pl:
run sys_vars suite by default
properly recognize envirinment variables (e.g. MTR_MAX_SAVE_CORE) set to 0
escape gdb command line arguments
mysql-test/suite/sys_vars/r/rpl_init_slave_func.result:
init_slave+utf8 bug
mysql-test/suite/sys_vars/t/rpl_init_slave_func.test:
init_slave+utf8 bug
mysys/my_getopt.c:
Bug#34599 MySQLD Option and Variable Reference need to be consistent in formatting!
Bug#46586 When using the plugin interface the type "set" for options caused a crash.
Bug#49640 ambiguous option '--skip-skip-myisam' (double skip prefix)
mysys/typelib.c:
support for flagset
sql/ha_ndbcluster.cc:
backport from telco tree
sql/item_func.cc:
Bug#49644 init_connect and \0
Bug#49645 init_slave and multi-byte characters
sql/sql_builtin.cc.in:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
sql/sql_plugin.cc:
Bug#44691 Some plugins configured as MYSQL_PLUGIN_MANDATORY in can be disabled
Bug#32902 plugin variables don't know their names
Bug#44797 plugins w/o command-line options have no disabling option in --help
sql/sys_vars.cc:
all server variables are defined here
storage/myisam/ft_parser.c:
remove unnecessary updates of param->quot
storage/myisam/ha_myisam.cc:
myisam_* variables belong here
strings/my_vsnprintf.c:
%o and %llx
unittest/mysys/my_vsnprintf-t.c:
%o and %llx tests
vio/viosocket.c:
bugfix: fix @@wait_timeout to work with socket timeouts (vs. alarm thread)
Bug#49836 reports that the geometry type does not work
with WL#5151 applied.
The GEOMETRY type inherits the blob comparison function,
which read the pack length from the metadata. The GEOMETRY
type does not fill in the metadata with anything sensible,
so it is always zero, meaning that the pack length for the
source type is considered zero, rendering it always "smaller"
than the target type which has pack length 4 (without pointer).
This patch fixes the problem by defining
Field_geom::pack_length_from_metadata() to always use the
same as Field_geom::row_pack_length().
when replicating
The function create_virtual_tmp_table does not
set db_low_byte_first in the same way as
create_tmp_table does, causing copying from
the virtual table to a real table to get strange
values for SET types on big-endian machines.
mysql-test/extra/rpl_tests/type_conversions.test:
Adding tests for converting between different-sized sets.
sql/sql_select.cc:
Settng dh_low_byte_first for tables created
with create_virtual_tmp_table.
'LOAD DATA CONCURRENT [LOCAL] INFILE ...' statment only is binlogged as
'LOAD DATA [LOCAL] INFILE ...' in SBR and MBR. As a result, if replication is on,
queries on slaves will be blocked by the replication SQL thread.
This patch write code to write 'CONCURRENT' into the log event if 'CONCURRENT' option
is in the original statement in SBR and MBR.
Problem: The test was written before BUG#45827 was fixed.
The test contained code that assumed the wrong behavior,
pre-BUG#45827. Then, the fix for BUG#45827 was merged
from 5.1-rep+2 to 5.1-rep+3. Since the test case assumed
the wrong behavior, it failed. This should have been fixed
by making the test assume the correct behavior, but was
fixed by updating the result file to assert failure.
Fix 1: fix the test to assume correct behavior
(post-BUG#45827), update result file.
Fix 2: make test fail with 'die' instead of 'exit' when
wrong behavior is detected. Thus, the test cannot be
silenced with a wrong result file in case the behavior
will change again.
mysql-test/extra/rpl_tests/create_recursive_construct.inc:
Replaced 'exit' by 'die' to avoid similar
mysql-test/suite/binlog/r/binlog_unsafe.result:
Updated result file.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Since BUG#45827 is now fixed, we need to update the test case
in two places where it expects the wrong result because of
BUG#45827.
Row-based replication requires the types of columns on the
master and slave to be approximately the same (some safe
conversions between strings are allowed), but does not
allow safe conversions between fields of similar types such
as TINYINT and INT.
This patch implement type conversions between similar fields
on the master and slave.
The conversions are controlled using a new variable
SLAVE_TYPE_CONVERSIONS of type SET('ALL_LOSSY','ALL_NON_LOSSY').
Non-lossy conversions are any conversions that do not run the
risk of losing any information, while lossy conversions can
potentially truncate the value. The column definitions are
checked to decide if the conversion is acceptable.
If neither conversion is enabled, it is required that the
definitions of the columns are identical on master and slave.
Conversion is done by creating an internal conversion table,
unpacking the master data into it, and then copy the data to
the real table on the slave.
.bzrignore:
New files added
client/Makefile.am:
New files added
client/mysqlbinlog.cc:
Functions in rpl_utility.cc is now needed by mysqlbinlog.cc.
libmysqld/Makefile.am:
New files added
mysql-test/extra/rpl_tests/check_type.inc:
Test include file to check a single type conversion.
mysql-test/extra/rpl_tests/rpl_extraSlave_Col.test:
Switching to use INT instead of TEXT for column that should not have matching types.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding code to enable type conversions for BIT tests since InnoDB
cannot handle them properly due to incorrect information stored as
metadata.
mysql-test/extra/rpl_tests/type_conversions.test:
Test file to check a set of type conversions
with current settings of slave_type_conversions.
mysql-test/suite/rpl/t/rpl_typeconv.test:
Test file to test conversions from master to slave with
all possible values for slave_type_conversions.
The test also checks that the slave_type_conversions
variable works as expected.
sql/field.cc:
Changing definition of compatible_field_size to both check if
two field with identical base types are compatible and give an
order between them if they are compatible.
This only implement checking on the slave, so it will not affect
replication from an old master to a new slave.
sql/field.h:
Changing prototypes for functions:
- compatible_field_size()
- init_for_tmp_table()
- row_pack_length()
sql/log_event.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/log_event_old.cc:
Changing compability checks to build a conversion table if the fields
are compatible, but does not have the same base type.
sql/mysql_priv.h:
Adding global option variable for SLAVE_TYPE_CONVERSIONS
sql/mysqld.cc:
Adding SLAVE_TYPE_CONVERSIONS global server variable.
sql/rpl_record.cc:
Changing unpack_row to use the conversion table if present.
sql/rpl_rli.h:
Removing function get_tabledef and replacing it with get_table_data().
This function retrieve data for table opened for replication, not just
table definition.
sql/rpl_utility.cc:
Function table_def::compatible_with is changed to compare table on master
and slave for compatibility and generate a conversions table if they are
compatible.
Computing real type of fields from metadata for ENUM and SET types.
Computing pack_length correctly for ENUM, SET, and BLOB types.
Adding optimization to not check compatibility if no
slave type conversions are enabled.
sql/rpl_utility.h:
Changing prototypes since implementation has changed.
Modifying table_def::type() to return real type instead of stored type.
sql/set_var.cc:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/set_var.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/share/errmsg.txt:
Adding error messages for slave type conversions.
sql/sql_class.h:
Adding SLAVE_TYPE_CONVERSIONS variable.
sql/sql_select.cc:
Correcting create_virtual_tmp_table() to compute null bit positions
correctly in the presence of bit fields.
