Also, include fixes by Vladislav Vaintroub to the
aws_key_management plugin. The AWS C++ SDK specifically depends on
OPENSSL_LIBRARIES, not generic SSL_LIBRARIES (such as YaSSL).
- Do not throw output of exec command, if disable_result_log is set
save and dump it if exec fails. Need tha to meaningfully analyze
errors from mariabackup.
- rmdir now removes the entire tree. need that because xtrabackup tests
clean the whole directory.
- all filesystem modifying commands now require the argument to
be under MYSQLTEST_VARDIR or MYSQL_TMP_DIR.
* remove redundant casts
* fix fix_win_paths() not to pretend that it takes const char* string
because it changes it. Fix its callers not to pass const strings
into it.
* use _WIN32 not __WIN__
MYSQL_OPT_SSL_MODE option introduced.
It is set in case of --ssl-mode=REQUIRED and permits only SSL connection.
(cherry picked from commit 3b2d28578c526f347f5cfe763681eff365731f99)
- MDEV-11621 rpl.rpl_gtid_stop_start fails sporadically in buildbot
- MDEV-11620 rpl.rpl_upgrade_master_info fails sporadically in buildbot
The issue above was probably that the build machine was overworked and the
shutdown took longer than 30 resp 10 seconds, which caused MyISAM tables
to be marked as crashed.
Fixed by flushing myisam tables before doing a forced shutdown/kill.
I also increased timeout for forced shutdown from 10 seconds to 60 seconds
to fix other possible issues on slow machines.
Fixed also some compiler warnings
Backport the fix to 5.5, because it fails there too
The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
Conflicts:
client/mysqltest.cc
mysql-test/r/pool_of_threads.result
mysql-test/t/pool_of_threads.test
The patch fixes two test failures:
- on slow builders, sometimes a connection attempt which should
fail due to the exceeded number of thread_pool_max_threads
actually succeeds;
- on even slow builders, MTR sometimes cannot establish the
initial connection, and check-testcase fails prior to the
test start
The problem with check-testcase was caused by connect-timeout=2
which was set for all clients in the test config file. On slow
builders it might be not enough.
There is no way to override it for the pre-test check, so it needed
to be substantially increased or removed.
The other problem was caused by a race condition between sleeps
that the test performs in existing connections and the connect
timeout for the connection attempt which was expected to fail.
If sleeps finished before the connect-timeout was exceeded, it
would allow the connection to succeed.
To solve each problem without making the other one worse,
connect-timeout should be configured dynamically during the test.
Due to the nature of the test (all connections must be busy
at the moment when we need to change the timeout, and cannot execute
SET GLOBAL ...), it needs to be done independently from the server.
The solution:
- recognize 'connect_timeout' as a connection option in mysqltest's
"connect" command;
- remove connect-timeout from the test configuration file;
- use the new connect_timeout option for those connections which
are expected to fail;
- re-arrange the test flow to allow running a huge SLEEP
without affecting the test execution time (because it would be
interrupted after the main test flow is finished).
The test is still subject to false negatives, e.g. if the connection
fails due to timeout rather than due to the exceeded number of
allowed threads, or if the connection on extra port succeeds due
to a race condition and not because the special logic for the extra
port. But those false negatives have always been possible there
on slow builders, they should not be critical because faster builders
should catch such failures if they appear.
mysqldump/mysql_install_db.exe fail
The bug is described in
https://connect.microsoft.com/VisualStudio/Feedback/Details/1902345
When reading from a pipe in text mode, using CRT function such as fread(),
some newlines may be lost. Workaround is to use binary mode on reading side
and if necessary, replace \r\n with \n.
The issue was that when running with valgrind the wait for master_pos_Wait()
was not long enough.
This patch also fixes two other failures that could affect rpl_mdev6020:
- check_if_conflicting_replication_locks() didn't properly check domains
- 'did_mark_start_commit' was after signals to other threads was sent which could
get the variable read too early.
Fix test whether process is alive in mysqltest.
Also fix SHUT_RD definition on Windows to be SD_RECEIVE.
SD_BOTH was used instead prior to this patch, and this would
occasionally make mysql_shutdown() fail - when the socket for the current connection
is not able send the COM_SHUTDOWN response anymore.
- Removed some QQ markers
- Removed some rows not compatible with valgrind 3.9.0
- Made mysql_install_db.sh more silent by default. --verbose now gives more information
- Added assert that auto-increment doesn't generate 0 (safety)
- Removed thd->set_time() in some places as it's set in init_for_queries()
- Fixed some --big tests in tokudb
- Fixed a bug in mysql_client_test.cc where sql_mode was not properly reset
cherry-pick f1daf9ce from 10.0 branch
-------------------------------------
Fix build failures caused by new C runtime library
- isnan, snprintf, struct timespec are now defined, attempt to
redefine them leads
- P_tmpdir, tzname are no more defined
- lfind() and lsearch() in lf_hash.c had to be renamed, declaration
conflicts with some C runtime functions with the same name declared in
a header included by stdlib.h
Also fix couple of annoying warnings :
- remove #define NOMINMAX from config.h to avoid "redefined" compiler
warnings(NOMINMAX is already in compile flags)
- disable incremental linker in Debug as well (feature not used much
and compiler crashes often)
Also simplify package building with Wix, require Wix 3.9 or later
(VS2015 is not compatible with old Wix 3.5/3.6)
Fix test whether process is alive in mysqltest.
Also fix SHUT_RD definition on Windows to be SD_RECEIVE.
SD_BOTH was used instead prior to this patch, and this would
occasionally make mysql_shutdown() fail - when the socket for the current connection
is not able send the COM_SHUTDOWN response anymore.
Fix build failures caused by new C runtime library
- isnan, snprintf, struct timespec are now defined, attempt to
redefine them leads
- P_tmpdir, tzname are no more defined
- lfind() and lsearch() in lf_hash.c had to be renamed, declaration
conflicts with some C runtime functions with the same name declared in
a header included by stdlib.h
Also fix couple of annoying warnings :
- remove #define NOMINMAX from config.h to avoid "redefined" compiler
warnings(NOMINMAX is already in compile flags)
- disable incremental linker in Debug as well (feature not used much
and compiler crashes often)
Also simplify package building with Wix, require Wix 3.9 or later
(VS2015 is not compatible with old Wix 3.5/3.6)
- If run with valgrind, mysqltest will now wait longer when syncronizing slave with master
- Ensure that we wait with cleanup() until slave thread has stopped.
- Added signal_thd_deleted() to signal close_connections() that all THD's has been freed.
- Check in handle_fatal_signal() that we don't use variables that has been freed.
- Increased some timeouts when run with --valgrind
Other things:
- Fixed wrong test in one_thread_per_connection_end() if galera is used.
- Removed not needed calls to THD_CHECK_SENTRY() when we are calling 'delete thd'.
As the MF_THREAD_SPECIFIC was introduced to the alloc_root's and
the prealloc added to the statement::mem_root and statement::result.alloc, we have to adjust
the embedded server to it. The preallocation was removed for the embedded server as it
makes no sence for it. The msyqltest should free the statement inside the proper thead to
make the memory statistics happy.
Part 1: first 2 cases of valgrind complain. context_analysis_only can be used on non-started LEX (opening tables)
obviouse fixes in DBUG and is_lex_started assignment.
in when using vio->read_timeout (and write_timeout) to set
timeouts of a new vio, as in:
vio_timeout(vio, 0, old_vio.read_timeout)
vio_timeout(vio, 0, old_vio.write_timeout)
remember that timeouts are stored in ms, but vio_timeout()'s
argument is in seconds.
The problem was that my_hash_sort didn't properly delete end-space characters properly, so strings that should compare
identically was seen as different strings. (Space was handled correctly, but not NBSP)
This caused duplicate key errors when a heap table was converted to Aria as part of overflow in group by.
Fixed by removing all characters that compares as end space when creating a hash.
Other things:
- Fixed that --sorted_results also works for errors in mysqltest.
- Speed up hash by not comparing strings that has different hash.
- Speed up many my_hash_sort functions by using registers to calculate hash instead of pointers.
This was previously done for some functions, but not for all.
- Made a macro of the hash function, to simplify code and to be able to experiment with new hash functions.
client/mysqltest.cc:
Fixed that --sorted_results also works for error messages.
mysql-test/r/ctype_partitions.result:
New test to ensure that partitions on hash works
mysql-test/suite/multi_source/gtid.result:
Updated result
mysql-test/suite/multi_source/gtid.test:
Test that --sorted_result works for error messages
mysql-test/suite/multi_source/gtid_ignore_duplicates.result:
Updated result
mysql-test/suite/multi_source/gtid_ignore_duplicates.test:
Updated result
mysql-test/suite/multi_source/load_data.result:
Updated result
mysql-test/suite/multi_source/load_data.test:
Updated result
mysql-test/t/ctype_partitions.test:
New test to ensure that partitions on hash works
storage/heap/hp_write.c:
Speed up hash by not comparing strings that has different hash.
storage/maria/ma_check.c:
Extra debug
strings/ctype-bin.c:
Use macro for hash function
strings/ctype-latin1.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-mb.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-simple.c:
Use macro for hash function
Use same variable names as in other my_hash_sort functions.
Update my_hash_sort_simple() to properly remove end space (patch by Bar)
strings/ctype-uca.c:
Ignore duplicated space inside strings and end space in my_hash_sort_uca(). This fixed MDEV-6255
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-ucs2.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/ctype-utf8.c:
Use macro for hash function
Use registers to calculate hash (speedup)
strings/strings_def.h:
Made a macro of the hash function, to simplify code and to be able to experiment with new hash functions.
MySQL 5.6 implemented WL#344, which is about a MASTER_DELAY option to CHANGE
MASTER. But as part of this worklog, the format of the realy-log.info file was
changed. The new format is not understood by earlier versions, and nor by
MariaDB 10.0, so changing server to those versions would cause the slave to
abort with an error due to reading incorrect data out of relay-log.info.
Fix this by backporting from the WL#344 patch just the code that understands
the new relay-log.info format. We still write out the old format, and none of
the MASTER_DELAY feature is backported with this commit.
The bug was in the mysqltest.c. It didn't check the send_query result
properly, so when that fails and the thread gets disconnected,
it goes unnoticed, so the consequitive read_result call crashes.
Fixed by checking the sernd_query return.
Reduced number of my_hash_sort_bin() calls from 4 to 1 per query.
Reduced number of memory accesses done by my_hash_sort_bin().
Details:
- let MDL subsystem use pre-calculated hash value for hash
inserts and deletes
- let table cache use pre-calculated MDL hash value
- MDL namespace is excluded from hash value calculation, so that
hash value can be used by table cache as is
- hash value for MDL is calculated as resulting hash value + MDL
namespace
- extended hash implementation to accept user defined hash function
mysqltest in the 'embedded-server' mode runs queries in a separate thread,
but it didn't do so for the prepared statements - they were run in the main thread.
That leads to inconsistencies.
When a test sets SESSION 'dbug' variable like
SET SESSION debug_dbug="+d,warn_during_ha_commit_trans";
it is run as a plain query in that separate thread, so the main thread remains unaffected.
After that the prepared statement run in the main thread doesn't produce expected 'dbug' errors,
so the test fails.
To fix that I made prepared statement to be run in that special thread along with the plain queries.
That makes the environment consistent.
actually consumed it. With this patch evaluated query buffer is freed
along with query buffer.
The problem was uncovered by udf_debug_sync.test when it was run with
--embedded.
mysql_upgrade --help now also prints out --default options and variable values.
mysql_upgrade now prints permission errors.
mysql_upgrade doesn't print some non essential info if --silent is used.
Added handler error message about incompatible versions
Fixed that mysqlbug and mysql_install_db have the executable flag set.
Removed executable flag for some non executable files.
Changed in mysql_install_db askmonty.org to mariadb.com.
Ensured that all client executables prints --default options the same way.
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible.
Extended shown error for storage engine messages.
client/mysql.cc:
print_defaults() should be first (as in all other programs)
client/mysql_upgrade.c:
--help now also prints out --default options and variable values
Print out error if wrong permissions
Don't print info if --silent
client/mysqladmin.cc:
print_defaults() should be first (as in all other programs)
client/mysqlbinlog.cc:
Added print_defaults() to --help
client/mysqlcheck.c:
Added empty line in --help
client/mysqlimport.c:
Added empty line in --help
client/mysqlshow.c:
Made --help compatible
client/mysqlslap.c:
Made --help compatible
client/mysqltest.cc:
Added print_defaults() to --help
include/handler_ername.h:
Added handler error message
include/my_base.h:
Added handler error message
mysql-test/r/mysql_upgrade.result:
Updated results
mysql-test/r/repair.result:
Added test case for better error messages
mysql-test/std_data/host_old.MYD:
Added test case for better error messages
mysql-test/std_data/host_old.MYI:
Added test case for better error messages
mysql-test/std_data/host_old.frm:
Added test case for better error messages
mysql-test/t/repair.test:
Added test case for better error messages
mysys/my_handler_errors.h:
Added handler error message
scripts/CMakeLists.txt:
Fixed that mysqlbug and mysql_install_db have the executable flag set
scripts/mysql_install_db.sh:
askmonty.org -> mariadb.com
sql/ha_partition.cc:
Sometimes table_type() can be called for errors even if partition didn't manage to open any files
sql/handler.cc:
Write clear text for not handled, but defined error messages.
sql/share/errmsg-utf8.txt:
Extended shown error for storage engine messages
sql/sql_admin.cc:
Allow REPAIR ... USE_FRM for old .frm files if the are still compatible
storage/myisam/ha_myisam.cc:
Use new error message
include/CMakeLists.txt:
Added handler_ername.h
include/handler_ername.h:
Names of handler error messages
mysql-test/extra/binlog_tests/binlog.test:
Test using handler error names
mysql-test/r/mysqltest.result:
Update for new error message
mysql-test/t/auto_increment.test:
Test using handler error names
mysql-test/t/auto_increment_ranges.inc:
Test using handler error names
mysql-test/t/replace.test:
Test using handler error names
"PCRE_STATIC" must be defined before including pcre.h
to avoid linking errors:
- unresolved external symbol __imp_regerror
- unresolved external symbol __imp_pcre_exec
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
See also MySQL Bug #39750 and similar ones.
Fix my_delete() on Windows, to safely remvoe files on Windows, including files that are opened by another threads in the same process, antiviruses and backup applications. If file to be deleted is also opened by another thread, the file is renamed to unique name prior to deletion - this makes it possible to create file with the same name right after deletion.
With this patch my_delete_allow_opened() becomes obsolete and is replaced with my_delete().
This patch is rework of the patch http://lists.mysql.com/commits/59327 for MySQL bug#39750.
Non-blocking client currently can be build on Windows, GCC on i386 and x64, or any OS wth ucontext.h header. Prior to this patch, build failed if neither of these conditions is true.
Fix to avoid compiler errors in these case - non-blocking API would not be useful on , but otherwise everything will work as before.
* replace pointer acrobatics with a struct
* make sorting explicit: MY_DONT_SORT -> MY_WANT_SORT
(if you want something to be done - say it. fixes all places where
my_dir() was used without thinking)
* typo s/number_off_files/number_of_files/
* directory_file_name() doesn't need to be extern
* remove #ifdef __BORLANDC__
* ignore '.' and '..' entries
allow only three failed change_user per connection.
successful change_user do NOT reset the counter
tests/mysql_client_test.c:
make --error to work for --change_user errors
Base code and idea from a patch from by plinux at Taobao.
The idea is that we mark all memory that are thread specific with MY_THREAD_SPECIFIC.
Memory counting is done per thread in the my_malloc_size_cb_func callback function from my_malloc().
There are plenty of new asserts to ensure that for a debug server the counting is correct.
Information_schema.processlist gets two new columns: MEMORY_USED and EXAMINED_ROWS.
- The later is there mainly to show how query is progressing.
The following changes in interfaces was needed to get this to work:
- init_alloc_root() amd init_sql_alloc() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- One now have to use alloc_root_set_min_malloc() to set min memory to be allocated by alloc_root()
- my_init_dynamic_array() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- my_net_init() has extra option so that one can mark memory with MY_THREAD_SPECIFIC
- Added flag for hash_init() so that one can mark hash table to be thread specific.
- Added flags to init_tree() so that one can mark tree to be thread specific.
- Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
- Added flag to Warning_info::Warning_info() if the structure should be fully initialized.
- String elements can now be marked as thread specific.
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Changed type of myf from int to ulong, as this is always a set of bit flags.
Other things:
- Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
- We now also show EXAMINED_ROWS in SHOW PROCESSLIST
- Added new variable 'memory_used'
- Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
- Removed calls to the obsoleted function init_dynamic_array()
- Use set_current_thd() instead of my_pthread_setspecific_ptr(THR_THD,...)
client/completion_hash.cc:
Updated call to init_alloc_root()
client/mysql.cc:
Updated call to init_alloc_root()
client/mysqlbinlog.cc:
init_dynamic_array() -> my_init_dynamic_array()
Updated call to init_alloc_root()
client/mysqlcheck.c:
Updated call to my_init_dynamic_array()
client/mysqldump.c:
Updated call to init_alloc_root()
client/mysqltest.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Fixed compiler warnings
extra/comp_err.c:
Updated call to my_init_dynamic_array()
extra/resolve_stack_dump.c:
Updated call to my_init_dynamic_array()
include/hash.h:
Added HASH_THREAD_SPECIFIC
include/heap.h:
Added flag is internal temporary table.
include/my_dir.h:
Safety fix: Ensure that MY_DONT_SORT and MY_WANT_STAT don't interfer with other mysys flags
include/my_global.h:
Changed type of myf from int to ulong, as this is always a set of bit flags.
include/my_sys.h:
Added MY_THREAD_SPECIFIC and MY_THREAD_MOVE
Added malloc_flags to DYNAMIC_ARRAY
Added extra mysys flag argument to my_init_dynamic_array()
Removed deprecated functions init_dynamic_array() and my_init_dynamic_array.._ci
Updated paramaters for init_alloc_root()
include/my_tree.h:
Added my_flags to allow one to use MY_THREAD_SPECIFIC with hash tables.
Removed with_delete. One should now instead use MY_TREE_WITH_DELETE_FLAG
Updated parameters to init_tree()
include/myisamchk.h:
Added malloc_flags to allow one to use MY_THREAD_SPECIFIC for checks.
include/mysql.h:
Added MYSQL_THREAD_SPECIFIC_MALLOC
Used 'unused1' to mark memory as thread specific.
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Used 'unused1' to mark memory as thread specific.
Updated parameters for my_net_init()
libmysql/libmysql.c:
Updated call to init_alloc_root() to mark memory thread specific.
libmysqld/emb_qcache.cc:
Updated call to init_alloc_root()
libmysqld/lib_sql.cc:
Updated call to init_alloc_root()
mysql-test/r/create.result:
Updated results
mysql-test/r/user_var.result:
Updated results
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/datadict/processlist_val.inc:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/is_columns_is.result:
Update to handle new format of SHOW PROCESSLIST
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/t/show_explain.test:
Fixed usage of debug variable so that one can run test with --debug
mysql-test/t/user_var.test:
Added test of memory_usage variable.
mysys/array.c:
Added extra my_flags option to init_dynamic_array() and init_dynamic_array2() so that one can mark memory with MY_THREAD_SPECIFIC
All allocated memory is marked with the given my_flags.
Removed obsolete function init_dynamic_array()
mysys/default.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
mysys/hash.c:
Updated call to my_init_dynamic_array_ci().
Allocated memory is marked with MY_THREAD_SPECIFIC if HASH_THREAD_SPECIFIC is used.
mysys/ma_dyncol.c:
init_dynamic_array() -> my_init_dynamic_array()
Added #if to get rid of compiler warnings
mysys/mf_tempdir.c:
Updated call to my_init_dynamic_array()
mysys/my_alloc.c:
Added extra parameter to init_alloc_root() so that one can mark memory with MY_THREAD_SPECIFIC
Extend MEM_ROOT with a flag if memory is thread specific.
This is stored in block_size, to keep the size of the MEM_ROOT object identical as before.
Allocated memory is marked with MY_THREAD_SPECIFIC if used with init_alloc_root()
mysys/my_chmod.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_chsize.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_copy.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_create.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_delete.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_error.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fopen.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_fstream.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_getwd.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_lib.c:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Updated DBUG_PRINT because of change of myf type
mysys/my_lock.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_malloc.c:
Store at start of each allocated memory block the size of the block and if the block is thread specific.
Call malloc_size_cb_func, if set, with the memory allocated/freed.
Updated DBUG_PRINT because of change of myf type
mysys/my_open.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_pread.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_read.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_redel.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_rename.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_seek.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_sync.c:
Updated DBUG_PRINT because of change of myf type
mysys/my_thr_init.c:
Ensure that one can call my_thread_dbug_id() even if thread is not properly initialized.
mysys/my_write.c:
Updated DBUG_PRINT because of change of myf type
mysys/mysys_priv.h:
Updated parameters to sf_malloc and sf_realloc()
mysys/safemalloc.c:
Added checking that for memory marked with MY_THREAD_SPECIFIC that it's the same thread that is allocation and freeing the memory.
Added sf_malloc_dbug_id() to allow MariaDB to specify which THD is handling the memory.
Added my_flags arguments to sf_malloc() and sf_realloc() to be able to mark memory with MY_THREAD_SPECIFIC.
Added sf_report_leaked_memory() to get list of memory not freed by a thread.
mysys/tree.c:
Added flags to init_tree() so that one can mark tree to be thread specific.
Removed with_delete option to init_tree(). Now one should instead use MY_TREE_WITH_DELETE_FLAG.
Updated call to init_alloc_root()
All allocated memory is marked with the given malloc flags
mysys/waiting_threads.c:
Updated call to my_init_dynamic_array()
sql-common/client.c:
Updated call to init_alloc_root() and my_net_init() to mark memory thread specific.
Updated call to my_init_dynamic_array().
Added MYSQL_THREAD_SPECIFIC_MALLOC so that client can mark memory as MY_THREAD_SPECIFIC.
sql-common/client_plugin.c:
Updated call to init_alloc_root()
sql/debug_sync.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/event_scheduler.cc:
Removed calls to net_end() as this is now done in ~THD()
Call set_current_thd() to ensure that memory is assigned to right thread.
sql/events.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/filesort.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/filesort_utils.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/ha_ndbcluster.cc:
Updated call to init_alloc_root()
Updated call to my_net_init()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_ndbcluster_binlog.cc:
Updated call to my_net_init()
Updated call to init_sql_alloc()
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
sql/ha_partition.cc:
Updated call to init_alloc_root()
sql/handler.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
Added missing call to my_dir_end()
sql/item_func.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_subselect.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/item_sum.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/log.cc:
More DBUG
Updated call to init_alloc_root()
sql/mdl.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/mysqld.cc:
Added total_memory_used
Updated call to init_alloc_root()
Move mysql_cond_broadcast() before my_thread_end()
Added mariadb_dbug_id() to count memory per THD instead of per thread.
Added my_malloc_size_cb_func() callback function for my_malloc() to count memory.
Move initialization of mysqld_server_started and mysqld_server_initialized earlier.
Updated call to my_init_dynamic_array().
Updated call to my_net_init().
Call my_pthread_setspecific_ptr(THR_THD,...) to ensure that memory is assigned to right thread.
Added status variable 'memory_used'.
Updated call to init_alloc_root()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/mysqld.h:
Added set_current_thd()
sql/net_serv.cc:
Added new parameter to my_net_init() so that one can mark memory with MY_THREAD_SPECIFIC.
Store in net->thread_specific_malloc if memory is thread specific.
Mark memory to be thread specific if requested.
sql/opt_range.cc:
Updated call to my_init_dynamic_array()
Updated call to init_sql_alloc()
Added MY_THREAD_SPECIFIC to allocated memory.
sql/opt_subselect.cc:
Updated call to init_sql_alloc() to mark memory thread specific.
sql/protocol.cc:
Fixed compiler warning
sql/records.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/rpl_filter.cc:
Updated call to my_init_dynamic_array()
sql/rpl_handler.cc:
Updated call to my_init_dynamic_array2()
sql/rpl_handler.h:
Updated call to init_sql_alloc()
sql/rpl_mi.cc:
Updated call to my_init_dynamic_array()
sql/rpl_tblmap.cc:
Updated call to init_alloc_root()
sql/rpl_utility.cc:
Updated call to my_init_dynamic_array()
sql/slave.cc:
Initialize things properly before calling functions that allocate memory.
Removed calls to net_end() as this is now done in ~THD()
sql/sp_head.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
Added parameter to warning_info() that it should be fully initialized.
sql/sp_pcontext.cc:
Updated call to my_init_dynamic_array()
sql/sql_acl.cc:
Updated call to init_sql_alloc()
Updated call to my_init_dynamic_array()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_admin.cc:
Added parameter to warning_info() that it should be fully initialized.
sql/sql_analyse.h:
Updated call to init_tree() to mark memory thread specific.
sql/sql_array.h:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_audit.cc:
Updated call to my_init_dynamic_array()
sql/sql_base.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_cache.cc:
Updated comment
sql/sql_class.cc:
Added parameter to warning_info() that not initialize it until THD is fully created.
Updated call to init_sql_alloc()
Mark THD::user_vars has to be thread specific.
Updated call to my_init_dynamic_array()
Ensure that memory allocated by THD is assigned to the THD.
More DBUG
Always acll net_end() in ~THD()
Assert that all memory signed to this THD is really deleted at ~THD.
Fixed set_status_var_init() to not reset memory_used.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_class.h:
Added MY_THREAD_SPECIFIC to allocated memory.
Added malloc_size to THD to record allocated memory per THD.
sql/sql_delete.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_error.cc:
Added 'initialize' parameter to Warning_info() to say if should allocate memory for it's structures.
This is used by THD::THD() to not allocate memory until THD is ready.
Added Warning_info::free_memory()
sql/sql_error.h:
Updated Warning_info() class.
sql/sql_handler.cc:
Updated call to init_alloc_root() to mark memory thread specific.
sql/sql_insert.cc:
More DBUG
sql/sql_join_cache.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_lex.cc:
Updated call to my_init_dynamic_array()
sql/sql_lex.h:
Updated call to my_init_dynamic_array()
sql/sql_load.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/sql_parse.cc:
Removed calls to net_end() and thd->cleanup() as these are now done in ~THD()
Ensure that examined_row_count() is reset before query.
Fixed bug where kill_threads_for_user() was using the wrong mem_root to allocate memory.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Don't restore thd->status_var.memory_used when restoring thd->status_var
sql/sql_plugin.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Don't allocate THD on the stack, as this causes problems with valgrind when doing thd memory counting.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_prepare.cc:
Added parameter to warning_info() that it should be fully initialized.
Updated call to init_sql_alloc() to mark memory thread specific.
sql/sql_reload.cc:
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_select.cc:
Updated call to my_init_dynamic_array() and init_sql_alloc() to mark memory thread specific.
Added MY_THREAD_SPECIFIC to allocated memory.
More DBUG
sql/sql_servers.cc:
Updated call to init_sql_alloc() to mark memory some memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_show.cc:
Updated call to my_init_dynamic_array()
Mark my_dir() memory thread specific.
Use my_pthread_setspecific_ptr(THR_THD,...) to mark that allocated memory should be allocated to calling thread.
More DBUG.
Added malloc_size and examined_row_count to SHOW PROCESSLIST.
Added MY_THREAD_SPECIFIC to allocated memory.
Updated call to init_sql_alloc()
Added parameter to warning_info() that it should be fully initialized.
sql/sql_statistics.cc:
Fixed compiler warning
sql/sql_string.cc:
String elements can now be marked as thread specific.
sql/sql_string.h:
String elements can now be marked as thread specific.
sql/sql_table.cc:
Updated call to init_sql_alloc() and my_malloc() to mark memory thread specific
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
Fixed compiler warning
sql/sql_test.cc:
Updated call to my_init_dynamic_array() to mark memory thread specific.
sql/sql_trigger.cc:
Updated call to init_sql_alloc()
sql/sql_udf.cc:
Updated call to init_sql_alloc()
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/sql_update.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
sql/table.cc:
Updated call to init_sql_alloc().
Mark memory used by temporary tables, that are not for slave threads, as MY_THREAD_SPECIFIC
Updated call to init_sql_alloc()
sql/thr_malloc.cc:
Added my_flags argument to init_sql_alloc() to be able to mark memory as MY_THREAD_SPECIFIC.
sql/thr_malloc.h:
Updated prototype for init_sql_alloc()
sql/tztime.cc:
Updated call to init_sql_alloc()
Updated call to init_alloc_root() to mark memory thread specific.
my_pthread_setspecific_ptr(THR_THD,...) -> set_current_thd()
sql/uniques.cc:
Updated calls to init_tree(), my_init_dynamic_array() and my_malloc() to mark memory thread specific.
sql/unireg.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/csv/ha_tina.cc:
Updated call to init_alloc_root()
storage/federated/ha_federated.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
Ensure that memory allocated by fedarated is registered for the system, not for the thread.
storage/federatedx/federatedx_io_mysql.cc:
Updated call to my_init_dynamic_array()
storage/federatedx/ha_federatedx.cc:
Updated call to init_alloc_root()
Updated call to my_init_dynamic_array()
storage/heap/ha_heap.cc:
Added MY_THREAD_SPECIFIC to allocated memory.
storage/heap/heapdef.h:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_block.c:
Added parameter to hp_get_new_block() to be able to do thread specific memory tagging.
storage/heap/hp_create.c:
- Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
- Use MY_TREE_WITH_DELETE instead of removed option 'with_delete'.
storage/heap/hp_open.c:
Internal HEAP tables are now marking it's memory as MY_THREAD_SPECIFIC.
storage/heap/hp_write.c:
Added new parameter to hp_get_new_block()
storage/maria/ma_bitmap.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_blockrec.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_check.c:
Updated call to init_alloc_root()
storage/maria/ma_ft_boolean_search.c:
Updated calls to init_tree() and init_alloc_root()
storage/maria/ma_ft_nlq_search.c:
Updated call to init_tree()
storage/maria/ma_ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/maria/ma_loghandler.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_open.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_sort.c:
Updated call to my_init_dynamic_array()
storage/maria/ma_write.c:
Updated calls to my_init_dynamic_array() and init_tree()
storage/maria/maria_pack.c:
Updated call to init_tree()
storage/maria/unittest/sequence_storage.c:
Updated call to my_init_dynamic_array()
storage/myisam/ft_boolean_search.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_nlq_search.c:
Updated call to init_tree()
storage/myisam/ft_parser.c:
Updated call to init_tree()
Updated call to init_alloc_root()
storage/myisam/ft_stopwords.c:
Updated call to init_tree()
storage/myisam/mi_check.c:
Updated call to init_alloc_root()
storage/myisam/mi_write.c:
Updated call to my_init_dynamic_array()
Updated call to init_tree()
storage/myisam/myisamlog.c:
Updated call to init_tree()
storage/myisam/myisampack.c:
Updated call to init_tree()
storage/myisam/sort.c:
Updated call to my_init_dynamic_array()
storage/myisammrg/ha_myisammrg.cc:
Updated call to init_sql_alloc()
storage/perfschema/pfs_check.cc:
Rest current_thd
storage/perfschema/pfs_instr.cc:
Removed DBUG_ENTER/DBUG_VOID_RETURN as at this point my_thread_var is not allocated anymore, which can cause problems.
support-files/compiler_warnings.supp:
Disable compiler warning from offsetof macro.
- Added --verbose to BUILD scripts to get make to write out compile commands.
- Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 was used with build scripts.
- Don't write warnings about replication variables when doing bootstrap.
- Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
- Ignore some compiler warnings
BUILD/FINISH.sh:
Detect if AM_EXTRA_MAKEFLAGS=VERBOSE=1 or --verbose was used
BUILD/SETUP.sh:
Added --verbose to print out the full compile lines
Updated help message
client/mysqltest.cc:
Fixed that one can use 'replace' with cat_file
cmake/configure.pl:
If --verbose is used, get make to write out compile commands
debian/dist/Debian/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
debian/dist/Ubuntu/rules:
Added $AM_EXTRA_MAKEFLAGS to get VERBOSE=1 on buildbot builds
include/my_pthread.h:
Made set_timespec_time_nsec() more portable.
include/mysql/psi/mysql_thread.h:
Fixed that mysql_cond_wait() and mysql_cond_timedwait() will report original source file in case of errors.
mysql-test/suite/innodb/r/auto_increment_dup.result:
Fixed wrong DBUG_SYNC
mysql-test/suite/innodb/t/auto_increment_dup.test:
Fixed wrong DBUG_SYNC
mysql-test/suite/perfschema/include/upgrade_check.inc:
Make test more portable for changes in *.sql files
mysql-test/suite/perfschema/r/pfs_upgrade.result:
Updated test results
mysql-test/valgrind.supp:
Ignore running Aria checkpoint thread
scripts/mysqlaccess.sh:
Changed reference of bugs database
Ensure that also client-server group is read.
sql/handler.cc:
Added missing syncpoint
sql/mysqld.cc:
Don't write warnings about replication variables when doing bootstrap
sql/mysqld.h:
Don't write warnings about replication variables when doing bootstrap
sql/rpl_rli.cc:
Don't write warnings about replication variables when doing bootstrap
sql/sql_insert.cc:
Don't mask SERVER_SHUTDOWN in insert_delayed
This is done to be able to distingush between shutdown and interrupt errors
support-files/compiler_warnings.supp:
Ignore some compiler warnings in xtradb,innobase, oqgraph, yassl, string3.h
Documentation of the feature can be found at: http://kb.askmonty.org/en/multi-source-replication/
This code is based on code from Taobao, developed by Plinux
BUILD/SETUP.sh:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
client/mysqltest.cc:
Added support for error names starting with 'W'
Added connection_name support to --sync_with_master
cmake/maintainer.cmake:
Added -Wno-invalid-offsetof to get rid of warning of offsetof() on C++ class (safe in the contex we use it)
mysql-test/r/mysqltest.result:
Updated results
mysql-test/r/parser.result:
Updated results
mysql-test/suite/multi_source/my.cnf:
Setup of multi-master tests
mysql-test/suite/multi_source/simple.result:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/simple.test:
Simple basic test of multi-source functionality
mysql-test/suite/multi_source/syntax.result:
Test of multi-source syntax
mysql-test/suite/multi_source/syntax.test:
Test of multi-source syntax
mysql-test/suite/rpl/r/rpl_rotate_logs.result:
Updated results because of new error messages
mysql-test/t/parser.test:
Updated test as master_pos_wait() now takes more arguments than before
sql/event_scheduler.cc:
No reason to initialize slave_thread (it's guaranteed to be zero here)
sql/item_create.cc:
Added connection_name argument to master_pos_wait()
Simplified code
sql/item_func.cc:
Added connection_name argument to master_pos_wait()
sql/item_func.h:
Added connection_name argument to master_pos_wait()
sql/log.cc:
Added tag "Master 'connection_name'" to slave errors that has a connection name.
sql/mysqld.cc:
Added variable mysqld_server_initialized so that other functions can test if server is fully initialized.
Free all slave data in one place (fewer ifdef's)
Removed not needed call to close_active_mi()
Initialize slaves() later in startup to ensure that everthing is really initialized when slaves start.
Made status variable slave_running multi-source safe
sql/mysqld.h:
Added mysqld_server_initialized
sql/rpl_mi.cc:
Store connection name and cmp_connection_name (only used for show full slave status) in Master_info
Added code for Master_info_index, which handles storage of multi-master information
Don't write the empty "" connection_name to multi-master.info file. This is handled by the original code.
sql/rpl_mi.h:
Added connection_name and Master_info_index
sql/rpl_rli.cc:
Added connection_name to relay log files.
sql/rpl_rli.h:
Fixed type of slave_skip_counter as we now access it directly in sys_vars.cc, so it must be uint
sql/share/errmsg-utf8.txt:
Added new error messages needed for multi-source
Added multi-source name to error ER_MASTER_INFO and WARN_NO_MASTER_INFO
sql/slave.cc:
Moved things a bit around to make it easier to handle error conditions.
Create a global master_info_index and add the "" connection to it
Ensure that new Master_info doesn't fail.
Don't call terminate_slave_threads(active_mi..) on end_slave() as this is now done automaticly when deleting master_info_index.
Delete not needed function close_active_mi(). One can achive same thing by calling end_slave().
Added support for SHOW FULL SLAVE STATUS (show status for all master connections with connection_name as first column)
sql/slave.h:
Added new prototypes
sql/sql_base.cc:
More DBUG_PRINT
sql/sql_class.cc:
Reset thd->connection_name and thd-->default_master_connection
sql/sql_class.h:
Added thd->connection_name and thd-->default_master_connection
Added slave_skip_count to variables to make changing the @@sql_slave_skip_count variable thread safe
sql/sql_const.h:
Added MAX_CONNECTION_NAME
sql/sql_lex.cc:
Reset 'lex->verbose' (to simplify some sql_yacc.yy code)
sql/sql_lex.h:
Added connection_name
sql/sql_parse.cc:
Added support for connection_name to all SLAVE commands.
- Instead of using active_mi, we now get the current Master_info from master_info_index.
- Create new replication threads with CHANGE MASTER
- Added support for show_all_master_info()
sql/sql_reload.cc:
Made reset/full slave use master_info_index->get_master_info() instead of active_mi.
If one uses 'RESET SLAVE "connection_name" all' the connection is removed from master_info_index.
sql/sql_repl.cc:
sql_slave_skip_counter is moved to thd->variables to make it thread safe and fix some bugs with it
Add connection name to relay log files.
Added connection name to errors.
Added some logging for multi-master if log_warnings > 1
stop_slave():
- Don't check if thd is set. It's guaranteed to always be set.
change_master():
- Check for duplicate connection names in change_master()
- Check for wrong arguments first in file (to simplify error handling)
- Register new connections in master_info_index
sql/sql_yacc.yy:
Added optional connection_name to a all relevant master/slave commands
sql/strfunc.cc:
my_global.h shoud always be included first.
sql/sys_vars.cc:
Added variable default_master_connection
Made variable sql_slave_skip_counter multi-source safe
sql/sys_vars.h:
Added Sys_var_session_lexstring (needed for default_master_connection)
Added Sys_var_multi_source_uint (needed for sql_slave_skip_counter).
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
SHOW 2012 INSTEAD OF 2011
* Added a new macro to hold the current year :
COPYRIGHT_NOTICE_CURRENT_YEAR
* Modified ORACLE_WELCOME_COPYRIGHT_NOTICE macro
to take the initial year as parameter and pick
current year from the above mentioned macro.
SHOW 2012 INSTEAD OF 2011
* Added a new macro to hold the current year :
COPYRIGHT_NOTICE_CURRENT_YEAR
* Modified ORACLE_WELCOME_COPYRIGHT_NOTICE macro
to take the initial year as parameter and pick
current year from the above mentioned macro.
1. Clear text password client plugin disabled by default.
2. Added an environment variable LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN, that
when set to something starting with '1', 'Y' or 'y' will enable the clear
text
plugin for all connections.
3. Added a new mysql_options() option : MYSQL_ENABLE_CLEARTEXT_PLUGIN
that takes an my_bool argument. When the value of the argument is non-zero
the clear text plugin is enabled for this connection only.
4. Added an enable-cleartext-plugin config file option that takes a numeric
argument. If the numeric value of the numeric argument is non-zero the
clear
text plugin is enabled for the connection
5. Added a boolean command line option "--enable_cleartext_plugin" to
mysql, mysqlslap and mysqladmin. When specified it will call mysql_options
with the effect of #3
6. Added a new CLEARTEXT option to the connect command in mysqltest.
When specified it will enable the cleartext plugin for usage.
7. Added test cases and updated existing ones that need the clear text
plugin.
1. Clear text password client plugin disabled by default.
2. Added an environment variable LIBMYSQL_ENABLE_CLEARTEXT_PLUGIN, that
when set to something starting with '1', 'Y' or 'y' will enable the clear
text
plugin for all connections.
3. Added a new mysql_options() option : MYSQL_ENABLE_CLEARTEXT_PLUGIN
that takes an my_bool argument. When the value of the argument is non-zero
the clear text plugin is enabled for this connection only.
4. Added an enable-cleartext-plugin config file option that takes a numeric
argument. If the numeric value of the numeric argument is non-zero the
clear
text plugin is enabled for the connection
5. Added a boolean command line option "--enable_cleartext_plugin" to
mysql, mysqlslap and mysqladmin. When specified it will call mysql_options
with the effect of #3
6. Added a new CLEARTEXT option to the connect command in mysqltest.
When specified it will enable the cleartext plugin for usage.
7. Added test cases and updated existing ones that need the clear text
plugin.
Several fixes :
* sql-common/client.c
Added a validity check of the fields metadata packet sent
by the server.
Now libmysql will check if the length of the data sent by
the server matches what's expected by the protocol before
using the data.
* client/mysqltest.cc
Fixed the error handling code in mysqltest to avoid sending
new commands when the reading the result set failed (and
there are unread data in the pipe).
* sql_common.h + libmysql/libmysql.c + sql-common/client.c
unpack_fields() now generates a proper error when it fails.
Added a new argument to this function to support the error
generation.
* sql/protocol.cc
Added a debug trigger to cause the server to send a NULL
insted of the packet expected by the client for testing
purposes.
Several fixes :
* sql-common/client.c
Added a validity check of the fields metadata packet sent
by the server.
Now libmysql will check if the length of the data sent by
the server matches what's expected by the protocol before
using the data.
* client/mysqltest.cc
Fixed the error handling code in mysqltest to avoid sending
new commands when the reading the result set failed (and
there are unread data in the pipe).
* sql_common.h + libmysql/libmysql.c + sql-common/client.c
unpack_fields() now generates a proper error when it fails.
Added a new argument to this function to support the error
generation.
* sql/protocol.cc
Added a debug trigger to cause the server to send a NULL
insted of the packet expected by the client for testing
purposes.
This will contune the test case even if there was an error
and makes it easier to run a test that contains many sub tests against one engine.
(originally by Monty)
let x = `SELECT <something>`
The fix is to detect the condition "no active connection", to report error and die.
Note, that the check for no active connection was already in place for ordinary commands,
and was missing only for assign-variable command.
mysql-test-run auto-disables all optional plugins.
mysql-test/include/default_client.cnf:
no @OPT.plugindir anymore
mysql-test/include/default_mysqld.cnf:
don't disable plugins manually - mtr can do it better
mysql-test/suite/innodb/t/innodb_bug47167.test:
mtr now uses suite-dir as an include path
mysql-test/suite/innodb/t/innodb_file_format.test:
mtr now uses suite-dir as an include path
mysql-test/t/partition_binlog.test:
this test uses partitions
storage/example/mysql-test/mtr/t/source.result:
update results. as mysqltest includes the correct overlayed include
storage/innobase/handler/ha_innodb.cc:
the assert is wrong
mysql-test/r/information_schema_all_engines.result:
Update result
mysql-test/t/information_schema_all_engines.test:
Added --sorted-results as tables in information_schema are not sorted.
Main change is that non-blocking operation is now an option that must be
explicitly enabled with mysql_option(mysql, MYSQL_OPT_NONBLOCK, ...)
before any non-blocing operation can be used.
Also the CLIENT_REMEMBER_OPTIONS flag is now always enabled and thus
effectively ignored (it was not really useful anyway, and this simplifies
things when non-blocking mysql_real_connect() fails).
2. dialog plugin now always returns mysql->password if non-empty and the first question is of password type
3. split get_tty_password into get_tty_password_buff and strdup.
4. dialog plugin now uses get_tty_password by default
5. dialog.test
6. moved small tests of individual plugins into a dedicated suite
