(regression)
Problem was that partition pruning did not exclude the
last partition if the range was beyond it
(i.e. not using MAXVALUE)
Fix was to not include the last partition if the
partitioning function value was not within the partition
range.
mysql-test/r/partition_innodb.result:
Bug#51830: Incorrect partition pruning on range partition
(regression)
Updated result
mysql-test/r/partition_pruning.result:
Bug#51830: Incorrect partition pruning on range partition
(regression)
Updated result
mysql-test/t/partition_innodb.test:
Bug#51830: Incorrect partition pruning on range partition
(regression)
Added test for pruning in InnoDB, since it does not show
for MyISAM due to 'Impossible WHERE noticed after reading
const tables'.
mysql-test/t/partition_pruning.test:
Bug#51830: Incorrect partition pruning on range partition
(regression)
Added test
sql/sql_partition.cc:
Bug#51830: Incorrect partition pruning on range partition
(regression)
Also increase the partition id if not inside the last partition
(and no MAXVALUE is defined).
Added comments and DBUG_ASSERT.
SET autocommit=1 while XA transaction is active may
cause various side effects, including memory corruption
and server crash.
The problem is that SET autocommit=1 and further queries
attempt to commit local transaction, whereas XA transaction
is still active.
As local and XA transactions are mutually exclusive, this
patch forbids enabling autocommit mode while XA transaction
is active.
mysql-test/r/xa.result:
A test case for BUG#51342.
mysql-test/t/xa.test:
A test case for BUG#51342.
sql/set_var.cc:
Forbid enabling autocommit mode while XA transaction is
active.
MySQL uses two source layouts when building : the bzr
layout and the source package layout.
The previous fix for bug 35250 contained 1 change that is
valid for both modes and a number of changes that are valid
only for the bzr source layout.
The important thing was to fix the source package layout.
And for this the change in configure.in was sufficient.
It's not trivial (and not requested by this bug) to support
VPATH builds from the bzr trees.
This is why the other changes are reverted and the change to
fix the VPATH build for source distributions is left intact.
The problem was that killing a query during the optimization
phase of a subselect would lead to crashes. The root of the
problem is that the subselect execution engine ignores failures
(eg: killed) during the optimization phase (JOIN::optimize),
leading to a crash once the subquery is executed due to
partially initialized structures (in this case a join tab).
The optimal solution would be to cleanup certain optimizer
structures if the optimization phase fails, but currently
there is no infrastructure to properly to track and cleanup
the structures. To workaround the whole problem one somewhat
good solution is to avoid executing a subselect if the query
has been killed. Cutting short any problems caused by failures
during the optimization phase.
sql/item_subselect.cc:
Do not execute a subselect if the session or query has been killed.
The problem was that UNINSTALL PLUGIN wasn't performing privilege
checks before removing a plugin. Any user (including users without
any kind of privileges) could uninstall any plugin.
The solution is to verify if the user has the DELETE privilege for
the mysql.plugin table before uninstalling a plugin.
mysql-test/r/plugin_not_embedded.result:
Add test case result for Bug#51770.
mysql-test/t/plugin_not_embedded-master.opt:
Add example plugin path.
mysql-test/t/plugin_not_embedded.test:
Add test case for Bug#51770.
Skip embedded as test relies on privileges checks.
The problem is that Item_direct_view_ref which is inherited
from Item_ident updates orig_table_name and table_name with
the same values. The fix is introduction of new constructor
into Item_ident and up which updates orig_table_name and
table_name separately.
mysql-test/r/metadata.result:
test case
mysql-test/t/metadata.test:
test case
sql/item.cc:
new constructor which updates
orig_table_name and table_name
separately.
sql/item.h:
new constructor which updates
orig_table_name and table_name
separately.
sql/table.cc:
used new constructor
the fill_schema_processlist function accesses THD::query() without proper protection
so the parallel thread killing can lead to access to the freed meemory.
per-file comments:
sql/sql_load.cc
Bug#51377 Crash in information_schema / processlist on concurrent DDL workload
the THD::set_query_inner() call needs to be protected.
But here we don't need to change the original thd->query() at all.
sql/sql_show.cc
Bug#51377 Crash in information_schema / processlist on concurrent DDL workload
protect the THD::query() access with the THD::LOCK_thd_data mutex.
The problem is that not all column names retrieved from a SELECT
statement can be used as view column names due to length and format
restrictions. The server failed to properly check the conformity
of those automatically generated column names before storing the
final view definition on disk.
Since columns retrieved from a SELECT statement can be anything
ranging from functions to constants values of any format and length,
the solution is to rewrite to a pre-defined format any names that
are not acceptable as a view column name.
The name is rewritten to "Name_exp_%u" where %u translates to the
position of the column. To avoid this conversion scheme, define
explict names for the view columns via the column_list clause.
Also, aliases are now only generated for top level statements.
mysql-test/include/view_alias.inc:
Add test case for Bug#40277
mysql-test/r/compare.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/group_by.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/ps.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/subselect3.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/type_datetime.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/union.result:
Bug#40277: SHOW CREATE VIEW returns invalid SQL
mysql-test/r/view.result:
Add test case result for Bug#40277
mysql-test/r/view_alias.result:
Add test case result for Bug#40277
mysql-test/t/view_alias.test:
Add test case for Bug#40277
sql/sql_view.cc:
Check if auto generated column names are conforming. Also, the
make_unique_view_field_name function is not used as it uses the
original name to construct a new one, which does not work if the
name is invalid.
The problem was that bits of the destructive equality propagation
optimization weren't being undone after the execution of a stored
program. Modifications to the parse tree that are based on transient
properties must be undone to enable the re-execution of stored
programs.
The solution is to cleanup any references to predicates generated
by the equality propagation during the execution of a stored program.
mysql-test/r/trigger.result:
Add test case result for Bug#51650.
mysql-test/t/trigger.test:
Add test case for Bug#51650.
sql/item.cc:
Remove reference to a equality predicate.
auto_increment on duplicate entry
The bug was that when INSERT_ID was used and the storage
engine was told to release any reserved but not used
auto_increment values, it set the highest auto_increment
value to INSERT_ID.
The fix was to check if the auto_increment value was forced
by user (INSERT_ID) or by slave-thread, i.e. not auto-
generated. So that it is only allowed to release generated
values.
mysql-test/r/partition_error.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
updated result
mysql-test/suite/parts/inc/partition_auto_increment.inc:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added test
mysql-test/suite/parts/r/partition_auto_increment_archive.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that archive does only allow increasing
auto_increment values
mysql-test/suite/parts/r/partition_auto_increment_blackhole.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that blackhole accepts all inserts :)
mysql-test/suite/parts/r/partition_auto_increment_innodb.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that innodb rolls back inserts on error,
but keeps the auto_increment value.
mysql-test/suite/parts/r/partition_auto_increment_memory.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that memory and myisam inserts all rows
before the error.
mysql-test/suite/parts/r/partition_auto_increment_myisam.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that memory and myisam inserts all rows
before the error.
mysql-test/suite/parts/r/partition_auto_increment_ndb.result:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added result, note that NDB does not seem to handle
INSERT_ID as other engines. (Martin will look into it).
mysql-test/t/partition_error.test:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
Added test
sql/ha_partition.cc:
Bug#50392: insert_id is not reset for partitioned tables
auto_increment on duplicate entry
If the next_insert_id comes from non generated (i.e
forced by INSERT_ID or slave-thread) then we cannot
lower the reserved auto_increment value, since it have
not reserved any values.
consider clustered primary keys
Choosing a shortest index for the covering index scan,
the optimizer ignored the fact, that the clustered primary
key read involves whole table data.
The find_shortest_key function has been modified to
take into account that fact that a clustered PK has a
longest key of possible covering indices.
mysql-test/r/innodb_mysql.result:
Test case for bug #39653.
mysql-test/t/innodb_mysql.test:
Test case for bug #39653.
sql/sql_select.cc:
Bug #39653: find_shortest_key in sql_select.cc does not
consider clustered primary keys
The find_shortest_key function has been modified to
take into account that fact that a clustered PK has a
longest key of possible covering indices.
There was no check for foreign keys when altering partitioned
tables.
Added check for FK when altering partitioned tables.
mysql-test/r/partition_innodb.result:
Bug#50104: Partitioned table with just 1 partion works with fk
Updated test result
mysql-test/t/partition_innodb.test:
Bug#50104: Partitioned table with just 1 partion works with fk
Added test for adding FK on partitioned tables (both 1 and 2
partitions)
sql/sql_partition.cc:
Bug#50104: Partitioned table with just 1 partion works with fk
Disabled adding foreign key when altering a partitioned table.
Problem was block_size on partitioned tables was not set,
resulting in keys_per_block was not correct which affects
the cost calculation for read time of indexes (including
cost for group min/max).Which resulted in a bad optimizer
decision.
Fixed by setting stats.block_size correctly.
mysql-test/r/partition_range.result:
Bug#48229: group by performance issue of partitioned table
Added result
mysql-test/t/partition_range.test:
Bug#48229: group by performance issue of partitioned table
Added test
sql/ha_partition.cc:
Bug#48229: group by performance issue of partitioned table
Added missing assignment of stats.block_size.
mode
When the master was executing in sql_mode='traditional' (which
implies that really_abort_on_warning returns TRUE - because of
MODE_STRICT_ALL_TABLES), the error code (ER_DUP_ENTRY in the
reported case) was not being set in the
Query_log_event. Therefore, even if a failure was to be expected
when replaying the statement on the slave, a failure would occur,
because the Query_log_event was not transporting the expected
error code, but 0 instead.
This was because when the master was getting the error code to
set it in the Query_log_event, the executing thread would be
assumed to have been killed:
THD::killed==THD::KILL_BAD_DATA. This would make the error code
fetch routine not to check thd->main_da.sql_errno(), but instead
the thd->killed value. What's more, is that the server would
thd->killed value if thd->killed == THD::KILL_BAD_DATA and return
0 instead. So this is a double inconsistency, as the we should
not even check thd->killed but rather thd->main_da.sql_errno().
We fix this by extending the condition used to choose whether to
check the thd->main_da.sql_errno() or thd->killed, so that it
takes into consideration the case when:
thd->killed==THD::KILL_BAD_DATA.
+ failing statements
Implicit DROP event for temporary table is not getting
LOG_EVENT_THREAD_SPECIFIC_F flag, because, in the previous
executed statement in the same thread, which might even be a
failed statement, the thread_specific_used flag is set to
FALSE (in mysql_reset_thd_for_next_command) and not set to TRUE
before connection is shutdown. This means that implicit DROP
event will take the FALSE value from thread_specific_used and
will not set LOG_EVENT_THREAD_SPECIFIC_F in the event header. As
a consequence, mysqlbinlog will not print the pseudo_thread_id
from the DROP event, because one of the requirements for the
printout is that this flag is set to TRUE.
We fix this by setting thread_specific_used whenever we are
binlogging a DROP in close_temporary_tables, and resetting it to
its previous value afterward.
If an outer query is broken, a subquery might not even get set up.
EXPLAIN EXTENDED did not expect this and merrily tried to de-ref all
of the half-setup info.
We now catch this case and print as much as we have, as it doesn't cost us
anything (doesn't make regular execution slower).
backport from 5.1
mysql-test/r/explain.result:
Show that EXPLAIN EXTENDED with subquery and illegal out query doesn't crash.
Show also that SHOW WARNINGS will render an additional Note in the hope of
being, well, helpful.
mysql-test/t/explain.test:
If we have only half a query for EXPLAIN EXTENDED to print (i.e.,
incomplete subquery info as outer query is illegal), we should
provide the user with as much info as we easily can if they ask
for it. What we should not do is crash when they come asking for
help, that violates etiquette in some countries.
sql/item_subselect.cc:
If the sub-query's actually set up, print it. Otherwise, elide.
This patch fixes some typos and poorly formulated sentences in
the output from mysqld --help --verbose.
Some of the problems described in the bug report are already
handled by the patch for Bug#49447, and are therefore not
included in this patch.
for same data when using bit fields
Problem: checksum for BIT fields may be computed incorrectly
in some cases due to its storage peculiarity.
Fix: convert a BIT field to a string then calculate its checksum.
mysql-test/r/myisam.result:
Fix for bug#51304: checksum table gives different results
for same data when using bit fields
- test result.
mysql-test/t/myisam.test:
Fix for bug#51304: checksum table gives different results
for same data when using bit fields
- test case.
sql/sql_table.cc:
Fix for bug#51304: checksum table gives different results
for same data when using bit fields
- convert BIT fields to strings calculating its checksums
as some bits may be saved among NULL bits in the record buffer.
A client doing multiple mysql_library_init() and
mysql_library_end() calls over the lifetime of the process may
experience lost character set data, potentially even a
SIGSEGV.
This patch reinstates the reloading of character set data when
a mysql_library_init() is done after a mysql_library_end().
Item_field::print method does not take into
account fields whose values may be null.
The fix is to print 'NULL' if field value is null.
mysql-test/r/explain.result:
test case
mysql-test/r/func_str.result:
result fix
mysql-test/r/having.result:
result fix
mysql-test/r/select.result:
result fix
mysql-test/r/subselect.result:
result fix
mysql-test/r/union.result:
result fix
mysql-test/t/explain.test:
test case
sql/item.cc:
print 'NULL' if field value is null.
Incremental commit based on previous patch.
Addresses reviewer comments to move reseting of
thd->current_stmt_binlog_row_based to after binlog_query
takes place.
The problem is that cond->fix_fields(thd, 0) breaks
condition(cuts off 'having'). The reason of that is
that NULL valued Item pointer is present in the
middle of Item list and it breaks the Item processing
loop.
mysql-test/r/having.result:
test case
mysql-test/t/having.test:
test case
sql/item_cmpfunc.h:
added ASSERT to make sure that we do not add NULL valued Item pointer
sql/sql_select.cc:
skip adding an item to condition if Item pointer is NULL.
skip adding a list to condition if this list is empty.
performance degradation.
Filesort + join cache combination is preferred to full index scan because it
is usually faster. But it's not the case when the index is clustered one.
Now test_if_skip_sort_order function prefers filesort only if index isn't
clustered.
mysql-test/r/innodb_mysql.result:
Added a test case for the bug#50843.
mysql-test/t/innodb_mysql.test:
Added a test case for the bug#50843.
sql/sql_select.cc:
Bug#50843: Filesort used instead of clustered index led to
performance degradation.
Now test_if_skip_sort_order function prefers filesort only if index isn't
clustered.
Propagation of a large unsigned numeric constant
in the WHERE expression led to wrong result.
For example,
"WHERE a = CAST(0xFFFFFFFFFFFFFFFF AS USIGNED) AND FOO(a)",
where a is an UNSIGNED BIGINT, and FOO() accepts strings,
was transformed to "... AND FOO('-1')".
That has been fixed.
Also EXPLAIN EXTENDED printed incorrect numeric constants in
transformed WHERE expressions like above. That has been
fixed too.
mysql-test/r/bigint.result:
Added test case for bug #45360.
mysql-test/t/bigint.test:
Added test case for bug #45360.
sql/item.cc:
Bug #45360: wrong results
As far as Item_int_with_ref (and underlaying Item_int)
class accepts both signed and unsigned 64bit values,
Item_int::val_str and Item_int::print methods have been
modified to take into account unsigned_flag.
Fixed crash caused by x64 int/long incompatibility introduced
in Bug #29125.
sql/item_timefunc.cc:
Fixed crash caused by int/long incompatibility on x64 systems.
Changed two "uint" casts and a "long" declartion to "int" in order to
ensure that the integer sign is preserved.
See Bug #48739 for details.
The problem was in an incorrect debug assertion. The expression
used in the failing assertion states that when finding
references matching ORDER BY expressions, there can be only one
reference to a single table. But that does not make any sense,
all test cases for this bug are valid examples with multiple
identical WHERE expressions referencing the same table which
are also present in the ORDER BY list.
Fixed by removing the failing assertion. We also have to take
care of the 'found' counter so that we count multiple
references only once. We rely on this fact later in
eq_ref_table().
mysql-test/r/join.result:
Added a test case for bug #50335.
mysql-test/t/join.test:
Added a test case for bug #50335.
sql/sql_select.cc:
Removing the assertion in eq_ref_table() as it does not make
any sense. We also have to take care of the 'found' counter so
that we count multiple references only once. We rely on this
fact later in eq_ref_table().
backporting of bug@30703 to 5.1.
The fixes are backed up with a regression test.
mysql-test/include/test_fieldsize.inc:
waiting to stop is to be actually exclusively for SQL thread.
mysql-test/suite/rpl/r/rpl_show_slave_running.result:
new results file is added.
mysql-test/suite/rpl/t/rpl_show_slave_running.test:
regression test for bug#30703 is added.
sql/mysqld.cc:
refining `show status like slave_running' handler to correspond to one of
`show slave status'.
sql/slave.cc:
A dbug-sync point is added to complement the regression test.
For temporary tables that are created with an engine that does
not provide the HTON_CAN_RECREATE, the truncate operation is
performed resorting to the optimized handler::ha_delete_all_rows
method. However, this means that the truncate will share
execution path, from mysql_delete, with truncate on regular
tables and other delete operations. As a consequence the truncate
operation, for the temporary table is logged, even if in row mode
because there is no distinction between this and the other delete
operations at binlogging time.
We fix this by checking if: (i) the binlog format, when the
truncate operation was issued, is ROW; (ii) if the operation is a
truncate; and (iii) if the table is a temporary table; before
writing to the binary log. If all three conditions are met, we
skip writing to the binlog. A side effect of this fix is that we
limit the scope of setting and resetting the
current_stmt_binlog_row_based. Now we just set and reset it
inside mysql_delete in the boundaries of the
handler::ha_write_row loop. This way we have access to
thd->current_stmt_binlog_row_based real value inside
mysql_delete.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Updated result for spurious truncate table.
mysql-test/suite/binlog/t/binlog_row_innodb_truncate.test:
Test case.
sql/sql_delete.cc:
Added check in mysql_delete before writing the TRUNCATE statement
to the binary log. Additionally, removed the set/reset of
current_stmt_binlog_row_based so that it happens just in the
boundaries of the handler::ha_write_row loop inside mysql_delete.
"TYPE=storage_engine" is deprecated, and will be removed
in the Celosia release of MySQL. Since the option is
present in the Betony release and the version number of
Celosia is still not decided, we need to bump the
deprecation version number back up to "6.0".
