Add log_bin_index, log_bin_basename and relay_log_basename system
variables. Also, convert relay_log_index system variable to
NO_CMD_LINE and implement --relay-log-index as a command line
option.
on disconnect THD must clean user_var_events array before
dropping temporary tables. Otherwise when binlogging a DROP,
it'll access user_var_events, but they were allocated
in the already freed memroot.
Update the description of each test case as to why it is
counted in the correct binlog_group_commit_trigger_* variable.
Updated rpl_parallel_multilevel2.test to identify that 3 groups
occur in statement and mixed replication and one group in row based
replication.
remove group_commit_reason_immediate
rename group_commit_reason_transaction to group_commit_trigger_lock_wait
rename group_commit_reason_usec to group_commit_trigger_timeout
rename group_commit_reason_count to group_commit_triggger_count
The following global status variables where added:
* binlog_group_commit_reason_count
* binlog_group_commit_reason_usec
* binlog_group_commit_reason_transaction
* binlog_group_commit_reason_immediate
binlog_group_commit_reason_count corresponds to group commits made by
virtue of the binlog_commit_wait_count variable.
binlog_group_commit_reason_usec corresponds to the binlog_commit_wait_usec
variable.
binlog_group_commit_reason_transaction is a result of ordered
transaction that need to occur in the same order on the slave and can't
be parallelised.
binlog_group_commit_reason_immediate is caused to prevent stalls with
row locks as described in log.cc:binlog_report_wait_for. This immediate
count is also counted a second time in binlog_group_commit_reason_transaction.
Overall binlog_group_commits = binlog_group_commit_reason_count +
binlog_group_commit_reason_usec + binlog_group_commit_reason_transaction
This work was funded thanks to Open Source Developers Club Australia.
Parallel replication (in 10.0 / "conservative" mode) relies on binlog group
commits to group transactions that can be safely run in parallel on the
slave. The --binlog-commit-wait-count and --binlog-commit-wait-usec options
exist to increase the number of commits per group. But in case of conflicts
between transactions, this can cause unnecessary delay and reduced througput,
especially on a slave where commit order is fixed.
This patch adds a heuristics to reduce this problem. When transaction T1 goes
to commit, it will first wait for N transactions to queue up for a group
commit. However, if we detect that another transaction T2 is waiting for a row
lock held by T1, then we will skip the wait and let T1 commit immediately,
releasing locks and let T2 continue.
On a slave, this avoids the unfortunate situation where T1 is waiting for T2
to join the group commit, but T2 is waiting for T1 to release locks, causing
no work to be done for the duration of the --binlog-commit-wait-usec timeout.
(The heuristic seems reasonable on the master as well, so it is enabled for
all transactions, not just replication transactions).
- Fixed compiler warnings
- Added include/wait_for_binlog_checkpoint.inc, as suggested by JonasO
- Updated 'build-tags' to work with git (Patch by Serg)
Adjust the configuration options, as discussed on the
maria-developers@ mailing list.
The option to hint a transaction to not be replicated in parallel is
now called @@skip_parallel_replication, consistent with
@@skip_replication.
And the --slave-parallel-mode is now simplified to have just one of
the following values:
none
minimal
conservative
optimistic
aggressive
This reflects successively harder efforts to find opportunities to run
things in parallel on the slave. It allows to extend the server with
more automatic heuristics in the future without having to introduce a
new configuration option for each and every one.
Using a boolean flag for 'there is a RESET MASTER in progress' doesn't
work very well for multiple concurrent RESET MASTER statements.
Changed to a counter.
Fix:
===
Backport Bug#11756194 to mysql-5.5. slave breaks if
'drop database' fails on master and mismatched tables on
slave.
'DROP TABLE <deleted tables>' was binlogged when
'DROP DATABASE' failed and at least one table was deleted
from the database. The log event would lead slave SQL thread
stop if some of the tables did not exist on slave.
After this patch, It is always binlogged with 'IF EXISTS'
option.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
A "field" could be either an Item_field or
(if loading into a view) an Item_direct_ref that references Item_field.
Also: when iterating fields, use fields of the TABLE_LIST (table or view),
not fields of a TABLE (actual underlying table - might have more columns).
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
We should assume that the store engine will report the first duplicate key for this case.
Old code of suppression of unsafe logging error with LIMIT didn't work, because of wrong usage of my_interval_timer().
Suppress unsafe logging errors to the error log if we get too many unsafe logging errors in a short time.
This is to not overflow the error log with meaningless errors.
- Each error code is suppressed and counted separately.
- We do a 5 minute suppression of new errors if we get more than 10 errors in that time.
Only print unsafe logging errors if log_warnings > 1.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/engines/README:
Fixed typos
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
sql/sql_base.cc:
Don't log warning if there are two unique keys used with INSERT .. ON DUPLICATE KEY UPDATE.
We should assume that the store engine will report the first duplicate key for this case.
sql/sql_class.cc:
Suppress error in binary log if we get too many unsafe logging errors in a short time.
Only print unsafe logging errors if log_warnings > 1
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
mysql-test/suite/binlog/r/binlog_truncate_kill.result:
Added test case to test the fix for Bug#17942050.
mysql-test/suite/binlog/t/binlog_truncate_kill.test:
Added test case to test the fix for Bug#17942050.
sql/sql_truncate.cc:
Check if truncation is successful or not and retun appropriate
return values so that binlogging can be done based on that.
sql/sql_truncate.h:
Added a new enum.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
