Let InnoDB purge reset DB_TRX_ID,DB_ROLL_PTR when the history is removed.
[TODO: It appears that the resetting is not taking place as often as
it could be. We should test that a simple INSERT should eventually
cause row_purge_reset_trx_id() to be invoked unless DROP TABLE is
invoked soon enough.]
The InnoDB clustered index record system columns DB_TRX_ID,DB_ROLL_PTR
are used by multi-versioning. After the history is no longer needed, these
columns can safely be reset to 0 and 1<<55 (to indicate a fresh insert).
When a reader sees 0 in the DB_TRX_ID column, it can instantly determine
that the record is present the read view. There is no need to acquire
the transaction system mutex to check if the transaction exists, because
writes can never be conducted by a transaction whose ID is 0.
The persistent InnoDB undo log used to be split into two parts:
insert_undo and update_undo. The insert_undo log was discarded at
transaction commit or rollback, and the update_undo log was processed
by the purge subsystem. As part of this change, we will only generate
a single undo log for new transactions, and the purge subsystem will
reset the DB_TRX_ID whenever a clustered index record is touched.
That is, all persistent undo log will be preserved at transaction commit
or rollback, to be removed by purge.
The InnoDB redo log format is changed in two ways:
We remove the redo log record type MLOG_UNDO_HDR_REUSE, and
we introduce the MLOG_ZIP_WRITE_TRX_ID record for updating the
DB_TRX_ID,DB_ROLL_PTR in a ROW_FORMAT=COMPRESSED table.
This is also changing the format of persistent InnoDB data files:
undo log and clustered index leaf page records. It will still be
possible via import and export to exchange data files with earlier
versions of MariaDB. The change to clustered index leaf page records
is simple: we allow DB_TRX_ID to be 0.
When it comes to the undo log, we must be able to upgrade from earlier
MariaDB versions after a clean shutdown (no redo log to apply).
While it would be nice to perform a slow shutdown (innodb_fast_shutdown=0)
before an upgrade, to empty the undo logs, we cannot assume that this
has been done. So, separate insert_undo log may exist for recovered
uncommitted transactions. These transactions may be automatically
rolled back, or they may be in XA PREPARE state, in which case InnoDB
will preserve the transaction until an explicit XA COMMIT or XA ROLLBACK.
Upgrade has been tested by starting up MariaDB 10.2 with
./mysql-test-run --manual-gdb innodb.read_only_recovery
and then starting up this patched server with
and without --innodb-read-only.
trx_undo_ptr_t::undo: Renamed from update_undo.
trx_undo_ptr_t::old_insert: Renamed from insert_undo.
trx_rseg_t::undo_list: Renamed from update_undo_list.
trx_rseg_t::undo_cached: Merged from update_undo_cached
and insert_undo_cached.
trx_rseg_t::old_insert_list: Renamed from insert_undo_list.
row_purge_reset_trx_id(): New function to reset the columns.
This will be called for all undo processing in purge
that does not remove the clustered index record.
trx_undo_update_rec_get_update(): Allow trx_id=0 when copying the
old DB_TRX_ID of the record to the undo log.
ReadView::changes_visible(): Allow id==0. (Return true for it.
This is what speeds up the MVCC.)
row_vers_impl_x_locked_low(), row_vers_build_for_semi_consistent_read():
Implement a fast path for DB_TRX_ID=0.
Always initialize the TRX_UNDO_PAGE_TYPE to 0. Remove undo->type.
MLOG_UNDO_HDR_REUSE: Remove. This changes the redo log format!
innobase_start_or_create_for_mysql(): Set srv_undo_sources before
starting any transactions.
The parsing of the MLOG_ZIP_WRITE_TRX_ID record was successfully
tested by running the following:
./mtr --parallel=auto --mysqld=--debug=d,ib_log innodb_zip.bug56680
grep MLOG_ZIP_WRITE_TRX_ID var/*/log/mysqld.1.err
While the primary purpose of innodb_force_recovery is to allow
data to be rescued from an InnoDB instance that would crash due
to some data corruption, the settings 1, 2, or 3 are relatively
safe to use and there is no need to prevent write transactions
in these modes.
The setting innodb_force_recovery=4 and above can cause database
corruption. For those modes, we already set the flag
high_level_read_only to disable modifications, except DROP TABLE.
MODIFICATIONS_NOT_ALLOWED_MSG_FORCE_RECOVERY: Remove. There is no
need to spam the error log for each refused DML operation. It suffices
to return an error to the client. There will be messages at startup
if innodb_read_only or innodb_force_recovery are preventing writes.
The original intention of the setting innodb_force_recovery=3 was to
disable background activity that could create trouble, most notably,
the rollback of incomplete transactions, and the purge of transaction
history.
MySQL 5.6 introduced more background threads, it is creating
dict_stats_thread and fts_optimize_thread even though these threads
are at least as non-essential as the rollback and purge. These
threads are in fact worse, because they can create new transactions
on their own.
innobase_start_or_create_for_mysql(): Do not create any internal
undo log sources unless innodb_force_recovery<3.
When a slow shutdown is performed soon after spawning some work for
background threads that can create or commit transactions, it is possible
that new transactions are started or committed after the purge has finished.
This is violating the specification of innodb_fast_shutdown=0, namely that
the purge must be completed. (None of the history of the recent transactions
would be purged.)
Also, it is possible that the purge threads would exit in slow shutdown
while there exist active transactions, such as recovered incomplete
transactions that are being rolled back. Thus, the slow shutdown could
fail to purge some undo log that becomes purgeable after the transaction
commit or rollback.
srv_undo_sources: A flag that indicates if undo log can be generated
or the persistent, whether by background threads or by user SQL.
Even when this flag is clear, active transactions that already exist
in the system may be committed or rolled back.
innodb_shutdown(): Renamed from innobase_shutdown_for_mysql().
Do not return an error code; the operation never fails.
Clear the srv_undo_sources flag, and also ensure that the background
DROP TABLE queue is empty.
srv_purge_should_exit(): Do not allow the purge to exit if
srv_undo_sources are active or the background DROP TABLE queue is not
empty, or in slow shutdown, if any active transactions exist
(and are being rolled back).
srv_purge_coordinator_thread(): Remove some previous workarounds
for this bug.
innobase_start_or_create_for_mysql(): Set buf_page_cleaner_is_active
and srv_dict_stats_thread_active directly. Set srv_undo_sources before
starting the purge subsystem, to prevent immediate shutdown of the purge.
Create dict_stats_thread and fts_optimize_thread immediately
after setting srv_undo_sources, so that shutdown can use this flag to
determine if these subsystems were started.
dict_stats_shutdown(): Shut down dict_stats_thread. Backported from 10.2.
srv_shutdown_table_bg_threads(): Remove (unused).
Significantly reduce the amount of InnoDB, XtraDB and Mariabackup
code changes by defining pfs_os_file_t as something that is
transparently compatible with os_file_t.
This merge reverts commit 6ca4f693c1ce472e2b1bf7392607c2d1124b4293
from current 5.6.36 innodb.
Bug #23481444 OPTIMISER CALL ROW_SEARCH_MVCC() AND READ THE
INDEX APPLIED BY UNCOMMITTED ROW
Problem:
========
row_search_for_mysql() does whole table traversal for range query
even though the end range is passed. Whole table traversal happens
when the record is not with in transaction read view.
Solution:
=========
Convert the innodb last record of page to mysql format and compare
with end range if the traversal of row_search_mvcc() exceeds 100,
no ICP involved. If it is out of range then InnoDB can avoid the
whole table traversal. Need to refactor the code little bit to
make it compile.
Reviewed-by: Jimmy Yang <jimmy.yang@oracle.com>
Reviewed-by: Knut Hatlen <knut.hatlen@oracle.com>
Reviewed-by: Dmitry Shulga <dmitry.shulga@oracle.com>
RB: 14660
srv_sys_t::n_threads_active[]: Protect writes by both the mutex and
by atomic memory access.
srv_active_wake_master_thread_low(): Reliably wake up the master
thread if there is work to do. The trick is to atomically read
srv_sys->n_threads_active[].
srv_wake_purge_thread_if_not_active(): Atomically read
srv_sys->n_threads_active[] (and trx_sys->rseg_history_len),
so that the purge should always be triggered when there is work to do.
trx_commit_in_memory(): Invoke srv_wake_purge_thread_if_not_active()
whenever a transaction is committed. Purge could have been prevented by
the read view of the currently committing transaction, even if it is
a read-only transaction.
trx_purge_add_update_undo_to_history(): Do not wake up the purge.
This is only called by trx_undo_update_cleanup(), as part of
trx_write_serialisation_history(), which in turn is only called by
trx_commit_low() which will always call trx_commit_in_memory().
Thus, the added call in trx_commit_in_memory() will cover also
this use case where a committing read-write transaction added
some update_undo log to the purge queue.
trx_rseg_mem_restore(): Atomically modify trx_sys->rseg_history_len.
Simplify the tests that are present in MySQL 5.7. Make the table
smaller while generating enough undo log. Do not unnecessarily
drop tables.
trx_purge_initiate_truncate(): Remove two crash injection points
(before and after normal redo log checkpoint), because they are
not adding any value. Clarify some messages.
trx_sys_create_rsegs(): Display the number of active undo tablespaces.
srv_undo_tablespaces_init(): When initializing the data files, do not
leave srv_undo_tablespaces_active at 0.
Do not display that number; let trx_sys_create_rsegs() display it once
the final number is known.
innodb_params_adjust(): Adjust parameters after startup.
innobase_init(): Do not allow innodb_max_undo_size to be less
than SRV_UNDO_TABLESPACE_SIZE_IN_PAGES. This avoids unnecessary
repeated truncation of undo tablespaces when using
innodb_page_size=32k or innodb_page_size=64k.
InnoDB divides the allocation of undo logs into rollback segments.
The DB_ROLL_PTR system column of clustered indexes can address up to
128 rollback segments (TRX_SYS_N_RSEGS). Originally, InnoDB only
created one rollback segment. In MySQL 5.5 or in the InnoDB Plugin
for MySQL 5.1, all 128 rollback segments were created.
MySQL 5.7 hard-codes the rollback segment IDs 1..32 for temporary undo logs.
On upgrade, unless a slow shutdown (innodb_fast_shutdown=0)
was performed on the old server instance, these rollback segments
could be in use by transactions that are in XA PREPARE state or
transactions that were left behind by a server kill followed by a
normal shutdown immediately after restart.
Persistent tables cannot refer to temporary undo logs or vice versa.
Therefore, we should keep two distinct sets of rollback segments:
one for persistent tables and another for temporary tables. In this way,
all 128 rollback segments will be available for both types of tables,
which could improve performance. Also, MariaDB 10.2 will remain more
compatible than MySQL 5.7 with data files from earlier versions of
MySQL or MariaDB.
trx_sys_t::temp_rsegs[TRX_SYS_N_RSEGS]: A new array of temporary
rollback segments. The trx_sys_t::rseg_array[TRX_SYS_N_RSEGS] will
be solely for persistent undo logs.
srv_tmp_undo_logs. Remove. Use the constant TRX_SYS_N_RSEGS.
srv_available_undo_logs: Change the type to ulong.
trx_rseg_get_on_id(): Remove. Instead, let the callers refer to
trx_sys directly.
trx_rseg_create(), trx_sysf_rseg_find_free(): Remove unneeded parameters.
These functions only deal with persistent undo logs.
trx_temp_rseg_create(): New function, to create all temporary rollback
segments at server startup.
trx_rseg_t::is_persistent(): Determine if the rollback segment is for
persistent tables.
trx_sys_is_noredo_rseg_slot(): Remove. The callers must know based on
context (such as table handle) whether the DB_ROLL_PTR is referring to
a persistent undo log.
trx_sys_create_rsegs(): Remove all parameters, which were always passed
as global variables. Instead, modify the global variables directly.
enum trx_rseg_type_t: Remove.
trx_t::get_temp_rseg(): A method to ensure that a temporary
rollback segment has been assigned for the transaction.
trx_t::assign_temp_rseg(): Replaces trx_assign_rseg().
trx_purge_free_segment(), trx_purge_truncate_rseg_history():
Remove the redundant variable noredo=false.
Temporary undo logs are discarded immediately at transaction commit
or rollback, not lazily by purge.
trx_purge_mark_undo_for_truncate(): Remove references to the
temporary rollback segments.
trx_purge_mark_undo_for_truncate(): Remove a check for temporary
rollback segments. Only the dedicated persistent undo log tablespaces
can be truncated.
trx_undo_get_undo_rec_low(), trx_undo_get_undo_rec(): Add the
parameter is_temp.
trx_rseg_mem_restore(): Split from trx_rseg_mem_create().
Initialize the undo log and the rollback segment from the file
data structures.
trx_sysf_get_n_rseg_slots(): Renamed from
trx_sysf_used_slots_for_redo_rseg(). Count the persistent
rollback segment headers that have been initialized.
trx_sys_close(): Also free trx_sys->temp_rsegs[].
get_next_redo_rseg(): Merged to trx_assign_rseg_low().
trx_assign_rseg_low(): Remove the parameters and access the
global variables directly. Revert to simple round-robin, now that
the whole trx_sys->rseg_array[] is for persistent undo log again.
get_next_noredo_rseg(): Moved to trx_t::assign_temp_rseg().
srv_undo_tablespaces_init(): Remove some parameters and use the
global variables directly. Clarify some error messages.
Adjust the test innodb.log_file. Apparently, before these changes,
InnoDB somehow ignored missing dedicated undo tablespace files that
are pointed by the TRX_SYS header page, possibly losing part of
essential transaction system state.
Also, remove empty .ic files that were not removed by my MySQL commit.
Problem:
InnoDB used to support a compilation mode that allowed to choose
whether the function definitions in .ic files are to be inlined or not.
This stopped making sense when InnoDB moved to C++ in MySQL 5.6
(and ha_innodb.cc started to #include .ic files), and more so in
MySQL 5.7 when inline methods and functions were introduced
in .h files.
Solution:
Remove all references to UNIV_NONINL and UNIV_MUST_NOT_INLINE from
all files, assuming that the symbols are never defined.
Remove the files fut0fut.cc and ut0byte.cc which only mattered when
UNIV_NONINL was defined.
Starting with MySQL 5.7, temporary tables in InnoDB are handled
differently from persistent tables. Because temporary tables are
private to a connection, concurrency control and multi-versioning
(MVCC) are not applicable. For performance reasons, purge is
disabled as well. Rollback is supported for temporary tables;
that is why we have the temporary undo logs in the first place.
Because MVCC and purge are disabled for temporary tables, we should
discard all temporary undo logs already at transaction commit,
just like we discard the persistent insert_undo logs. Before this
change, update_undo logs were being preserved.
trx_temp_undo_t: A wrapper for temporary undo logs, comprising
a rollback segment and a single temporary undo log.
trx_rsegs_t::m_noredo: Use trx_temp_undo_t.
(Instead of insert_undo, update_undo, there will be a single undo.)
trx_is_noredo_rseg_updated(), trx_is_rseg_assigned(): Remove.
trx_undo_add_page(): Remove the parameter undo_ptr.
Acquire and release the rollback segment mutex inside the function.
trx_undo_free_last_page(): Remove the parameter trx.
trx_undo_truncate_end(): Remove the parameter trx, and add the
parameter is_temp. Clean up the code a bit.
trx_undo_assign_undo(): Split the parameter undo_ptr into rseg, undo.
trx_undo_commit_cleanup(): Renamed from trx_undo_insert_cleanup().
Replace the parameter undo_ptr with undo.
This will discard the temporary undo or insert_undo log at
commit/rollback.
trx_purge_add_update_undo_to_history(), trx_undo_update_cleanup():
Remove 3 parameters. Always operate on the persistent update_undo.
trx_serialise(): Renamed from trx_serialisation_number_get().
trx_write_serialisation_history(): Simplify the code flow.
If there are no persistent changes, do not update MONITOR_TRX_COMMIT_UNDO.
trx_commit_in_memory(): Simplify the logic, and add assertions.
trx_undo_page_report_modify(): Keep a direct reference to the
persistent update_undo log.
trx_undo_report_row_operation(): Simplify some code.
Always assign TRX_UNDO_INSERT for temporary undo logs.
trx_prepare_low(): Keep only one parameter. Prepare all 3 undo logs.
trx_roll_try_truncate(): Remove the parameter undo_ptr.
Try to truncate all 3 undo logs of the transaction.
trx_roll_pop_top_rec_of_trx_low(): Remove.
trx_roll_pop_top_rec_of_trx(): Remove the redundant parameter
trx->roll_limit. Clear roll_limit when exhausting the undo logs.
Consider all 3 undo logs at once, prioritizing the persistent
undo logs.
row_undo(): Minor cleanup. Let trx_roll_pop_top_rec_of_trx()
reset the trx->roll_limit.
InnoDB undo logs currently always use the innodb_page_size,
whether they are stored in the system tablespace, in a
dedicated undo tablespace, or in the temporary tablespace.
Remove redundant page_size parameters.
TrxUndoRsegsIterator::set_next(): return bool instead of page_size.
TrxUndoRsegsIterator::m_purge_sys: Remove. There is only one purge_sys.
purge_sys_t: Renamed from trx_purge_t. Define a constructor and
destructor. Allocate rseg_iter, purge_queue inline.
purge_sys->trx: Remove. Use purge_sys->sess->trx instead.
purge_sys->view_active: Remove. Access to purge_sys->view is always
protected by purge_sys->latch.
trx_purge_sys_create(): Replaced by purge_sys_t::purge_sys_t().
trx_purge_sys_close(): Replaced by purge_sys_t::~purge_sys_t().
InnoDB needs to collect transactions from the persistent data files
in trx_rseg_array_init() before trx_lists_init_at_db_start() is
executed. But there is no need to create purge_sys->purge_queue
separately from purge_sys.
trx_sys_init_at_db_start(): Change the return type to void.
Remove the direct call to trx_rseg_array_init(). It will be called
by trx_lists_init_at_db_start(), which we are calling.
Initialize the purge system read view.
trx_lists_init_at_db_start(): Call trx_purge_sys_create(), which will
invoke trx_rseg_array_init() to read the undo log segments.
trx_purge_sys_create(): Remove the parameters. Do not initialize
the purge system read view, because trx_sys->rw_trx_list has not
been recovered yet. The purge_sys->view will be initialized at
the end of trx_sys_init_at_db_start().
trx_rseg_array_init(): Remove the parameter. Use purge_sys->purge_queue
directly.
innobase_start_or_create_for_mysql(): Remove the local variable
purge_queue. Do not call trx_purge_sys_create(), because it will be
called by trx_sys_init_at_db_start().
In MySQL 5.7, there is some redundant code for supposedly handling
an upgrade from an earlier version of InnoDB.
An upgrade of InnoDB between major versions should include a
slow shutdown (innodb_fast_shutdown=0) of the previous version.
A comment in trx_lists_init_at_db_start() confused clean shutdown
and slow shutdown. A clean shutdown does not necessarily guarantee
that there are no active transactions. A slow shutdown guarantees
that.
Because there was no code to handle rollback of recovered transactions
that happened to use the rollback segment slots that MySQL 5.7.2
repurposed for temporary undo logs, the upgrade is not working in all
cases, and we may as well remove the code to handle purging.
trx_sys_t::pending_purge_rseg_array: Remove.
trx_undo_get_undo_rec_low(): Define as static. Remove the parameter
is_redo_rseg.
trx_undo_get_undo_rec(), trx_rseg_get_on_id(): Remove the parameter
is_redo_rseg.
trx_rseg_mem_free(): Remove the second parameter.
trx_sys_get_nth_rseg(): Replace with trx_rseg_get_on_id().
trx_rseg_schedule_pending_purge(): Remove.
The function trx_purge_stop() was calling os_event_reset(purge_sys->event)
before calling rw_lock_x_lock(&purge_sys->latch). The os_event_set()
call in srv_purge_coordinator_suspend() is protected by that X-latch.
It would seem a good idea to consistently protect both os_event_set()
and os_event_reset() calls with a common mutex or rw-lock in those
cases where os_event_set() and os_event_reset() are used
like condition variables, tied to changes of shared state.
For each os_event_t, we try to document the mutex or rw-lock that is
being used. For some events, frequent calls to os_event_set() seem to
try to avoid hangs. Some events are never waited for infinitely, only
timed waits, and os_event_set() is used for early termination of these
waits.
os_aio_simulated_put_read_threads_to_sleep(): Define as a null macro
on other systems than Windows. TODO: remove this altogether and disable
innodb_use_native_aio on Windows.
os_aio_segment_wait_events[]: Initialize only if innodb_use_native_aio=0.
log_write_flush_to_disk_low(): Invoke log_mutex_enter() at the end, to
avoid race conditions when changing the system state. (No potential
race condition existed before MySQL 5.7.)
The function trx_purge_stop() was calling os_event_reset(purge_sys->event)
before calling rw_lock_x_lock(&purge_sys->latch). The os_event_set()
call in srv_purge_coordinator_suspend() is protected by that X-latch.
It would seem a good idea to consistently protect both os_event_set()
and os_event_reset() calls with a common mutex or rw-lock in those
cases where os_event_set() and os_event_reset() are used
like condition variables, tied to changes of shared state.
For each os_event_t, we try to document the mutex or rw-lock that is
being used. For some events, frequent calls to os_event_set() seem to
try to avoid hangs. Some events are never waited for infinitely, only
timed waits, and os_event_set() is used for early termination of these
waits.
os_aio_simulated_put_read_threads_to_sleep(): Define as a null macro
on other systems than Windows. TODO: remove this altogether and disable
innodb_use_native_aio on Windows.
os_aio_segment_wait_events[]: Initialize only if innodb_use_native_aio=0.
The MariaDB 10.1 page_compression is incompatible with the Oracle
implementation that was introduced in MySQL 5.7 later.
Remove the Oracle implementation. Also remove the remaining traces of
MYSQL_ENCRYPTION.
This will also remove traces of PUNCH_HOLE until it is implemented
better. The only effective call to os_file_punch_hole() was in
fil_node_create_low() to test if the operation is supported for the file.
In other words, it looks like page_compression is not working in
MariaDB 10.2, because no code equivalent to the 10.1 os_file_trim()
is enabled.
In the backport of Bug#24450908 UNDO LOG EXISTS AFTER SLOW SHUTDOWN
from MySQL 5.7 to the MySQL 5.6 based MariaDB Server 10.1, we must
use a mutex when HAVE_ATOMIC_BUILTINS is not defined.
Also, correct a function comment. In MySQL 5.6 and MariaDB Server 10.1,
also temporary InnoDB tables are redo-logged.
Port a bug fix from MySQL 5.7, so that all undo log pages will be freed
during a slow shutdown. We cannot scrub pages that are left allocated.
commit 173e171c6fb55f064eea278c76fbb28e2b1c757b
Author: Thirunarayanan Balathandayuthapani <thirunarayanan.balathandayuth@oracle.com>
Date: Fri Sep 9 18:01:27 2016 +0530
Bug #24450908 UNDO LOG EXISTS AFTER SLOW SHUTDOWN
Problem:
========
1) cached undo segment is not removed from rollback segment history
(RSEG_HISTORY) during slow shutdown. In other words, If the segment is
not completely free, we are failing to remove an entry from the history
list. While starting the server, we traverse all rollback segment slots
history list and make it as list of undo logs to be purged in purge
queue.
In that case, purge queue will never be empty after slow shutdown.
2) Freeing of undo log segment is linked with removing undo log header
from history.
Fix:
====
1) Have separate logic of removing the undo log header from
history list from rollback segment slots and remove it from
rollback segment history even though it is not completely free.
Reviewed-by: Debarun Banerjee <debarun.banerjee@oracle.com>
Reviewed-by: Marko Mäkelä <marko.makela@oracle.com>
RB:13672
Replaced InnoDB atomic operations with server atomic operations.
Moved INNODB_RW_LOCKS_USE_ATOMICS - it is always defined (code won't compile
otherwise).
NOTE: InnoDB uses thread identifiers as a target for atomic operations.
Thread identifiers should be considered opaque: any attempt to use a
thread ID other than in pthreads calls is nonportable and can lead to
unspecified results.
Contains also:
MDEV-10549 mysqld: sql/handler.cc:2692: int handler::ha_index_first(uchar*): Assertion `table_share->tmp_table != NO_TMP_TABLE || m_lock_type != 2' failed. (branch bb-10.2-jan)
Unlike MySQL, InnoDB still uses THR_LOCK in MariaDB
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
enable tests that were fixed in MDEV-10549
MDEV-10548 Some of the debug sync waits do not work with InnoDB 5.7 (branch bb-10.2-jan)
fix main.innodb_mysql_sync - re-enable online alter for partitioned innodb tables
Contains also
MDEV-10547: Test multi_update_innodb fails with InnoDB 5.7
The failure happened because 5.7 has changed the signature of
the bool handler::primary_key_is_clustered() const
virtual function ("const" was added). InnoDB was using the old
signature which caused the function not to be used.
MDEV-10550: Parallel replication lock waits/deadlock handling does not work with InnoDB 5.7
Fixed mutexing problem on lock_trx_handle_wait. Note that
rpl_parallel and rpl_optimistic_parallel tests still
fail.
MDEV-10156 : Group commit tests fail on 10.2 InnoDB (branch bb-10.2-jan)
Reason: incorrect merge
MDEV-10550: Parallel replication can't sync with master in InnoDB 5.7 (branch bb-10.2-jan)
Reason: incorrect merge
