Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
A "field" could be either an Item_field or
(if loading into a view) an Item_direct_ref that references Item_field.
Also: when iterating fields, use fields of the TABLE_LIST (table or view),
not fields of a TABLE (actual underlying table - might have more columns).
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
Normally, SET SESSION SQL_LOG_BIN is used by DBAs to run a
non-conflicting command locally only, ensuring it does not
get replicated.
Setting GLOBAL SQL_LOG_BIN would not require all sessions to
disconnect. When SQL_LOG_BIN is changed globally, it does not
immediately take effect for any sessions. It takes effect by
becoming the session-level default inherited at the start of
each new session, and this setting is kept and cached for the
duration of that session. Setting it intentionally is unlikely
to have a useful effect under any circumstance; setting it
unintentionally, such as while intending to use SET [SESSION]
is potentially disastrous. Accidentally using SET GLOBAL
SQL_LOG_BIN will not show an immediate effect to the user,
instead not having the desired session-level effect, and thus
causing other potential problems with local-only maintenance
being binlogged and executed on slaves; And transactions from
new sessions (after SQL_LOG_BIN is changed globally) are not
binlogged and replicated, which would result in irrecoverable
or difficult data loss.
This is the regular GLOBAL variables way to work, but in
replication context it does not look right on a working server
(with connected sessions) 'set global sql_log_bin' and none of
that connections is affected. Unexperienced DBA after noticing
that the command did "nothing" will change the session var and
most probably won't unset the global var, causing new sessions
to not be binlog.
Setting GLOBAL SQL_LOG_BIN allows DBA to stop binlogging on all
new sessions, which can be used to make a server "replication
read-only" without restarting the server. But this has such big
requirements, stop all existing connections, that it is more
likely to make a mess, it is too risky to allow the GLOBAL variable.
The statement 'SET GLOBAL SQL_LOG_BIN=N' will produce an error
in 5.5, 5.6 and 5.7. Reading the GLOBAL SQL_LOG_BIN will produce
a deprecation warning in 5.7.
We should assume that the store engine will report the first duplicate key for this case.
Old code of suppression of unsafe logging error with LIMIT didn't work, because of wrong usage of my_interval_timer().
Suppress unsafe logging errors to the error log if we get too many unsafe logging errors in a short time.
This is to not overflow the error log with meaningless errors.
- Each error code is suppressed and counted separately.
- We do a 5 minute suppression of new errors if we get more than 10 errors in that time.
Only print unsafe logging errors if log_warnings > 1.
mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/binlog/r/binlog_unsafe.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
mysql-test/suite/engines/README:
Fixed typos
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
Update test results as INSERT ... ON DUPLICATE KEY UPDATE doesn't get logged anymore
sql/sql_base.cc:
Don't log warning if there are two unique keys used with INSERT .. ON DUPLICATE KEY UPDATE.
We should assume that the store engine will report the first duplicate key for this case.
sql/sql_class.cc:
Suppress error in binary log if we get too many unsafe logging errors in a short time.
Only print unsafe logging errors if log_warnings > 1
Merged lp:maria/maria-10.0-galera up to revision 3879.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
~40% bugfixed(*) applied
~40$ bugfixed reverted (incorrect or we're not buggy)
~20% bugfixed applied, despite us being not buggy
(*) only changes in the server code, e.g. not cmakefiles
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
DISCONNECT CON1 AND CON2
Problem:
The test suite/binlog/t/binlog_killed.test makes the connections
con1 and con2 but forgets to disconnect them + wait till that
operation is finished at test end.
This mistake has the potential to harm subsequent tests in
case these tests depend on the content of the processlist.
Solution:
Added disconnect + wait_until_disconnected.inc
within the test cleanup.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
mysql-test/suite/binlog/r/binlog_truncate_kill.result:
Added test case to test the fix for Bug#17942050.
mysql-test/suite/binlog/t/binlog_truncate_kill.test:
Added test case to test the fix for Bug#17942050.
sql/sql_truncate.cc:
Check if truncation is successful or not and retun appropriate
return values so that binlogging can be done based on that.
sql/sql_truncate.h:
Added a new enum.
WRITTEN WHILE ROWS REMAINS
Problem:
========
When truncate table fails while using transactional based
engines even though the operation errors out we still
continue and log it to binlog. Because of this master has
data but the truncate will be written to binary log which
will cause inconsistency.
Analysis:
========
Truncate table can happen either through drop and create of
table or by deleting rows. In the second case the existing
code is written in such a way that even if an error occurs
the truncate statement will always be binlogged. Which is not
correct.
Binlogging of TRUNCATE TABLE statement should check whether
truncate is executed "transactionally or not". If the table
is transaction based we log the TRUNCATE TABLE only on
successful completion.
If table is non transactional there are possibilities that on
error we could have partial changes done hence in such cases
we do log in spite of errors as some of the lines might have
been removed, so the statement has to be sent to slave.
Fix:
===
Using table handler whether truncate table is being executed
in transaction based mode or not is identified and statement
is binlogged accordingly.
IN TIME RECOVERY FAILURE ON SLAVES
Problem:
DROP TEMP TABLE IF EXISTS commands can cause point
in time recovery (re-applying binlog) failures.
Analyses:
In RBR, 'DROP TEMPORARY TABLE' commands are
always binlogged by adding 'IF EXISTS' clauses.
Also, the slave SQL thread will not check replicate.* filter
rules for "DROP TEMPORARY TABLE IF EXISTS" queries.
If log-slave-updates is enabled on slave, these queries
will be binlogged in the format of "USE `db`;
DROP TEMPORARY TABLE IF EXISTS `t1`;" irrespective
of filtering rules and irrespective of the `db` existence.
When users try to recover slave from it's own binlog,
use `db` command might fail if `db` is not present on slave.
Fix:
At the time of writing the 'DROP TEMPORARY TABLE
IF EXISTS' query into the binlog, 'use `db`' will not be
present and the table name in the query will be a fully
qualified table name.
Eg:
'USE `db`; DROP TEMPORARY TABLE IF EXISTS `t1`;'
will be logged as
'DROP TEMPORARY TABLE IF EXISTS `db`.`t1`;'.
IN TIME RECOVERY FAILURE ON SLAVES
Problem:
DROP TEMP TABLE IF EXISTS commands can cause point
in time recovery (re-applying binlog) failures.
Analyses:
In RBR, 'DROP TEMPORARY TABLE' commands are
always binlogged by adding 'IF EXISTS' clauses.
Also, the slave SQL thread will not check replicate.* filter
rules for "DROP TEMPORARY TABLE IF EXISTS" queries.
If log-slave-updates is enabled on slave, these queries
will be binlogged in the format of "USE `db`;
DROP TEMPORARY TABLE IF EXISTS `t1`;" irrespective
of filtering rules and irrespective of the `db` existence.
When users try to recover slave from it's own binlog,
use `db` command might fail if `db` is not present on slave.
Fix:
At the time of writing the 'DROP TEMPORARY TABLE
IF EXISTS' query into the binlog, 'use `db`' will not be
present and the table name in the query will be a fully
qualified table name.
Eg:
'USE `db`; DROP TEMPORARY TABLE IF EXISTS `t1`;'
will be logged as
'DROP TEMPORARY TABLE IF EXISTS `db`.`t1`;'.
includes:
* remove some remnants of "Bug#14521864: MYSQL 5.1 TO 5.5 BUGS PARTITIONING"
* introduce LOCK_share, now LOCK_ha_data is strictly for engines
* rea_create_table() always creates .par file (even in "frm-only" mode)
* fix a 5.6 bug, temp file leak on dummy ALTER TABLE
