and configuration.
1. Pass joiner's authentication information to donor together with address
in State Transfer Request. This allows joiner to authenticate donor on
connection. Previously joiner would accept data from anywhere.
2. Deprecate custom SSL configuration variables tca, tcert and tkey in favor
of more familiar ssl-ca, ssl-cert and ssl-key. For backward compatibility
tca, tcert and tkey are still supported.
3. Allow falling back to server-wide SSL configuration in [mysqld] if no SSL
configuration is found in [sst] section of the config file.
4. Introduce ssl-mode variable in [sst] section that takes standard values
and has following effects:
- old-style SSL configuration present in [sst]: no effect
otherwise:
- ssl-mode=DISABLED or absent: retains old, backward compatible behavior
and ignores any other SSL configuration
- ssl-mode=VERIFY*: verify joiner's certificate and CN on donor,
verify donor's secret on joiner
(passed to donor via State Transfer Request)
BACKWARD INCOMPATIBLE BEHAVIOR
- anything else enables new SSL configuration convetions but does not
require verification
ssl-mode should be set to VERIFY only in a fully upgraded cluster.
Examples:
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
-- server-wide SSL configuration is ignored, SST does not use SSL
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
ssl-mode=REQUIRED
-- use server-wide SSL configuration for SST but don't attempt to
verify the peer identity
[sst]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
ssl-mode=VERIFY_CA
-- use SST-specific SSL configuration for SST and require verification
on both sides
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
1. Fix eval command line to correctly pass stunnel option to rsync on donor.
2. Deprecate `tkey`, `tcert` and `tca` options in [sst] section in favor of
conventional `ssl-key`, `ssl-cert` and `ssl-ca`, but keep their precedence
for backward compatibility.
3. Default to require SSL encryption if at least SSL key and cert files are
specified in configuration, either in [sst] or [mysqld] sections.
4. Enable `verify*` option for stunnel on donor only if
a. CA file is specified somewhere in the configuration
b. it is explicitly requested in [sst] section by either specifying
ssl-mode or CA file there. In this case if ssl-mode is not explicitly
given, it defaults to VERIFY_CA.
ssl-mode maps to stunnel options as follows:
VERIFY_CA -> verifyChain = yes
VERIFY_IDENTITY -> verifyPeer = yes
Example to require donor to verify joiner identity:
```
[mysqld]
ssl-cert=/path/to/cert
ssl-key=/path/to/key
ssl-ca=/path/to/ca
[sst]
ssl-mode=VERIFY_IDENTITY
```
5. If SSL verification is requested, joiner verifies donor by checking the
secret passed to donor via SST request.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
- Limit decimals of doubles printed from MongoDB
Done in function Mini for Mongo C Driver and Java Driver
Done in function SerializeValue for Java tables using the J Driver
modified: storage/connect/cmgoconn.cpp
modified: storage/connect/json.cpp
modified: storage/connect/json.h
modified: storage/connect/tabjmg.cpp
- Fix crash when using BSON_TYPE_DECIMAL128
modified: storage/connect/cmgoconn.cpp
- Collection name default to table name
Fix it when creating tables via discovery
modified: storage/connect/ha_connect.cc
modified: storage/connect/tabbson.cpp
modified: storage/connect/tabjson.cpp
When you only need view structure, don't call handle_derived with
DT_CREATE and rely on its internal hackish check to skip DT_CREATE.
Because handle_derived is called from many different places,
and this internal hackish check is indiscriminative.
Instead, just don't ask handle_derived to do DT_CREATE
if you don't want it to do DT_CREATE.
When you only need view structure, don't call handle_derived with
DT_CREATE and rely on its internal hackish check to skip DT_CREATE.
Because handle_derived is called from many different places,
and this internal hackish check is indiscriminative.
Instead, just don't ask handle_derived to do DT_CREATE
if you don't want it to do DT_CREATE.
After switching to the new mariabackup interface (instead of
the outdated innobackupex interface, which is supported for
compatibility), we need to explicitly pass a path to the datadir
directory as a parameter, since in the new interface the value
of this option is not automatically set in such a way that it
always matches the SST/IST logic. This commit adds passing this
option as an explicit parameter to mariabackup. This commit also
removed unnecessary options that are not used and not supported
by mariabackup.
Also, numerous flaws in the common wsrep_sst_common script have
been fixed:
1) There are many bash-specific constructs in the script that
may not be supported by other interpreters, which can lead
to the most unexpected errors during SST, because failures
in the interpretation of bash-specific constructs lead to
incorrect parsing of arguments;
2) There is parse_cnf() function which is often called by other
scripts for the "mysqld" or "--mysqld" group, but it does not
take into account the default group suffix, which leads to
reading values only from the default group, which then leads
to errors due to reading the default values instead of the
values for a specific group;
3) Some options such as --user, --innodb-data-home-dir or --datadir
are not removed from the --mysqld-args list, although they are
processed inside scripts (and passing of these options funther
may cause problems for mariabackup);
4) If an argument that the script understands is present in
the --mysqld-args list twice, then this causes SST to fail,
instead of reading the most recent value;
5) The "--host" parameter is technically still supported among
the arguments of the SST scripts, but in reality scripts do not
work with it as expected, especially if it has an IPv6 address;
6) If the port number is absent in the --address parameter value,
but the port number is explicitly passed through the --port
argument, then the scripts for mariabackup and xtrabackup-v2
fail;
7) If a new address interface is used (with the --address parameter),
then automatic default port substitution is not performed, although
it is supported for the legacy --host/--port interface.
8) If there are spaces in the parameter values after --mysqld_args,
then their further transfer does not occur correctly, which
causes mariabackup to fail during SST - the space splits
the argument in such a way that it breaks the parsing of the
following parameters;
9) If most of the parameters that are names or paths to the files
or directories contain spaces, then SST scripts fail in an
unpredictable way due to incorrect variable substitutions;
10) If the --log-bin option is passed among the arguments of myqlds
(--mysqld-args) without a parameter, and the --binlog option
is not specified, then the script cannot substitute the default
name for binlog and cannot construct binlog name using the
--log-basename argument (which is against server specifications);
11) Tail slashes are not removed from the directory names, which,
upon further substitution, leads to the appearance of a double
slash in the file paths;
12) The explicit --binlog parameter (which is now always transmitted
from the server side) and the "hidden" --log-bin parameter in the
list of arguments after --mysqld-args are perceived as two different
parameters in different parts of the scripts, and if they are do not
match for some reason, this will lead to failures during SST;
Also, all new changes from the 10.6 branch have been migrated here,
including the latest pull requests for authentication (only the part
that concerns SST scripts).
It also fixes dozens of other bugs in all SST scripts.
Removed numerous extra blank lines and spaces that interfere with
reading and understanding program code, making it more difficult to
find errors in scripts. I also removed all extra trailing spaces at
the ends of lines, which lead to marking extra lines as changes
(in subsequent changes). The amount of indentation in some parts
of the code has also been normalized.
Fix a race condition in the testcase. The testcase assumed that
State='Sending data' means that the thread is already in an
InnoDB lock wait. This is not case, there is a gap between the
state changing to Sending data and execution reaching the point
where it is waiting for a lock.
Use a more precise check instead, through I_S.INNODB_TRX.
Problem:
========
180511 11:07:58 [ERROR] Slave I/O: Unexpected master's heartbeat data:
heartbeat is not compatible with local info;the event's data: log_file_name
mysql-bin.000009 log_pos 1054262041, Error_code: 1623
Analysis:
=========
In replication setup when master server doesn't have any events to send to
slave server it sends an 'Heartbeat_log_event'. This event carries the
current binary log filename and offset details. The offset values is stored
within 4 bytes of event header. When the size of binary log is higher than
UINT32_MAX the log_pos values will not fit in 4 bytes memory. It overflows
and hence slave stops with an error.
Fix:
===
Since we cannot extend the common_header of Log_event class, a greater than
4GB value of Log_event::log_pos is made to be transported with a HeartBeat
event's sub-header. Log_event::log_pos in such case is set to zero to
indicate that the 8 byte sub-header is allocated in the event.
In case of cross version replication following behaviour is expected
OLD - Server without fix
NEW - Server with fix
OLD<->NEW : works bidirectionally as long as the binlog offset is
(normally) within 4GB.
When log_pos > UINT32_MAX
OLD->NEW : The 'log_pos' is bound to overflow and NEW slave may report
an invalid event/incompatible heart beat event error.
NEW->OLD : Since patched server sets log_pos=0 on overflow, OLD slave will
report invalid event error.
InnoDB tries to fetch the deleted doc ids for discarded
tablespace. In i_s_fts_deleted_generic_fill(), InnoDB needs
to check whether the table is discarded or not before fetching
deleted doc ids.
fil_ibd_load(): Remove a message that is basically saying that
everything works as expected. The other "Ignoring data file" message
about the presence of an extraneous file will be retained
(and expected by the test innodb.log_file_name).
This commits replaces the call of the function setup_tables() with
a call of the function setup_tables_and_check_access() in the method
Multiupdate_prelocking_strategy::handle_end().
There is no known bug that would require this change. However the change
aligns this piece of code with the code existed before the patch for
MDEV-24823.
Attempt to build MariaDB server on MacOS could result in
compilation errors like the following one:
In file included from server-10.2/storage/perfschema/cursor_by_account.cc:28:
In file included from server-10.2/include/my_global.h:287:
In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.3.sdk/usr/include/c++/v1/math.h:309:
In file included from /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX11.3.sdk/usr/include/c++/v1/type_traits:418:
server-10.2/version:1:1: error: expected unqualified-id
MYSQL_VERSION_MAJOR=10
^
server-10.2/build.dir/include/my_config.h:529:29: note: expanded from macro 'MYSQL_VERSION_MAJOR'
This kind of compiler errors occur by the reson that compiler's system headers
contain the directive '#include <version>' and a compiler is invoked
with -I${CMAKE_SOURCE_DIR}.
The MariaDB source code root directory contains the file VERSION that is handled
by the compiler during processing the directive #include <version>
since file names on MacOS are case insensetive, so version and VERSION is treated as
the same file name.
To fix the issue the source code root directory should be removed from a list
of directories used by the compiler for include search path.
The problem is that sharing default expression among set instruction
leads to attempt access result field of function created in
other instruction runtime MEM_ROOT and already freed
(a bit different then MySQL problem).
Fix is the same as in MySQL (but no optimisation for constant), turn
DECLARE a, b, c type DEFAULT expr;
to
DECLARE a type DEFAULT expr, b type DEFAULT a, c type DEFAULT a;
plugin variables in SET only locked the plugin till the end of the
statement. If SET with a plugin variable was prepared, it was possible
to uninstall the plugin before EXECUTE. Then EXECUTE would crash,
trying to resolve a now-invalid pointer to a disappeared variable.
Fix: keep plugins locked until the prepared statement is closed.
encourage the use of mysql_secure_installation,
that can always set the root password correctly for all root accounts,
no matter how many are there and what the structure of privilege tables is
InnoDB startup hangs if a DDL transaction needs to be
rolled back and a recovered transaction on statistics
tables exists. In that case, InnoDB should rollback
the transaction which holds locks on innodb_table_stats
or innodb_index_stats during trx_rollback_or_clean_recovered().
InnoDB fails to fetch the index type when innodb dictionary
doesn't match with frm. InnoDB should return corrupted if it
can't find the index in ha_innobase::index_type().
table->move_fields wasn't undone in case of error.
1. move_fields is unconditionally undone even when error is occurred
2. cherry-pick an assertion in `ptr_in_record`, which is already in 10.5
The assertion is improved: storage engines like myisam always have to store
at least one field, so the assertion does not cover tables with no stored
columns.
So we are having a race condition of three of threads, resulting in a
deadlock backoff in purge, which is unexpected.
More precisely, the following happens:
T1: NOCOPY ALTER TABLE begins, and eventually it holds MDL_SHARED_NO_WRITE
lock;
T2: FLUSH TABLES begins. it sets share->tdc->flushed = true
T3: purge on a record with virtual column begins. it is going to open a
table. MDL_SHARED_READ lock is acquired therefore.
Since share->tdc->flushed is set, it waits for a TDC purge end.
T1: is going to elevate MDL LOCK to exclusive and therefore has to set
other waiters to back off.
T3: receives VICTIM status, reports a DEADLOCK, sets OT_BACKOFF_AND_RETRY
to Open_table_context::m_action
My fix is to allow opening table in purge while flushing. It is already
done the same way in other maintainance facilities like REPAIR TABLE.
Another way would be making an actual backoff, but Open_table_context
does not allow to distinguish it from other failure types, which still
seem to be unexpected. Making this would require hacking into
Open_table_context interface for no benefit, in comparison to passing
MYSQL_OPEN_IGNORE_FLUSH during table open.
innodb_debug_sync was introduced in commit
b393e2cb0c and reverted in
commit fc58c17216 due to memory leak reported
by valgrind, see MDEV-21336.
The leak is now fixed by adding `rw_lock_free(&slot->debug_sync_lock)`
after background thread working loop is finished, and the patch is
reapplied, with respect to c++98 fixes by Marko.
The missing DEBUG_SYNC for MDEV-18546 in row0vers.cc is also reapplied.
Quoting MDEV reporter Daniel Lewart:
Starting MariaDB with default configuration causes the following problems:
"[Warning] Could not increase number of max_open_files to more than 16384 (request: 32186)"
silently reduces table_open_cache_instances from 8 (default) to 4
Default Server System Variables:
extra_max_connections = 1
max_connections = 151
table_open_cache = 2000
table_open_cache_instances = 8
thread_pool_size = 4
LimitNOFILE=16834 is in the following files:
support-files/mariadb.service.in
support-files/mariadb@.service.in
Looking at sql/mysqld.cc lines 3837-3917:
wanted_files= (extra_files + max_connections + extra_max_connections +
tc_size * 2 * tc_instances);
wanted_files+= threadpool_size;
Plugging in the default values:
wanted_files = (30 + 151 + 1 + 2000 * 2 * 8 + 4) = 32186
However, systemd configuration has LimitNOFILE = 16384, which is far smaller.
I suggest increasing LimitNOFILE to 32768.
(trivial backport to 10.2)
The optimizer removes redundant GROUP BY operations. If GROUP BY element
is a subselect, it is "eliminated".
However one must not eliminate the item if it is used both in the select
list and in the GROUP BY, like so:
select (select ... ) as SUBQ from ... group by SUBQ
Do not eliminate such items.
It is possible that an object that was originally created by
open_purge_table() will remain cached and reused for SQL execution.
Our previous fix wrongly assumed that ha_innobase::open() would
always be called before SQL execution starts. Therefore, we must
invoke dict_stats_init() in ha_innobase::info_low() instead of
only doing it in ha_innobase::open().
Note: Concurrent execution of dict_stats_init() on the same table
is possible, but it also was possible between two calls to
ha_innobase::open(), with no ill effects observed.
This should fix the assertion failure on stat_initialized.
A possibly easy way to reproduce it would have been
to run the server with innodb_force_recovery=2 (disable the purge of
history), update a table so that an indexed virtual column will be
affected, and finally restart the server normally (purge enabled),
to observe a crash when the table is accessed from SQL.
The problem was first observed and this fix verified by
Elena Stepanova. Also Thirunarayanan Balathandayuthapani
repeated the problem.
row_sel_sec_rec_is_for_clust_rec(): If the field in the
clustered index record stored off page, always fetch it,
also when the secondary index field has been built on the
entire column. This was broken ever since the InnoDB Plugin
for MySQL Server 5.1 introduced ROW_FORMAT=DYNAMIC and
ROW_FORMAT=COMPRESSED for InnoDB tables. That code was first
introduced in this tree in
commit 3945d5e554.
For the original ROW_FORMAT=REDUNDANT and the MySQL 5.0.3
ROW_FORMAT=COMPRESSED, there was no problem, because for
those tables we always stored at least a 768-byte prefix of
each column in the clustered index record.
row_sel_sec_rec_is_for_blob(): Allow prefix_len==0 for matching
the full column.
Before FRM is written walk vcol expressions through
check_table_name_processor() and check if field items match (db,
table_name) qualifier.
We cannot do this in check_vcol_func_processor() as there is already
no table name qualifiers in expressions of written and loaded FRM.
Buffer overflow in ib_push_warning() fixed by using vsnprintf().
InnoDB parser was obsoleted by MDEV-16417.
Thanks to Nikita Malyavin for review and suggestion.
