The old code added to 10.6 was inconsisting in how TCP/IP and
socket connection was chosen. One got also a confusing warning
in some cases.
Examples:
> ../client/mysql --print-defaults
../client/mysql would have been started with the following arguments:
--socket=/tmp/mariadbd.sock --port=3307 --no-auto-rehash
> ../client/mysql
ERROR 2002 (HY000): Can't connect to local server through socket '/tmp/mariadbd.sock' (2)
> ../client/mysql --print-defaults
../client/mysql would have been started with the following arguments:
--socket=/tmp/mariadbd.sock --port=3307 --no-auto-rehash
> ../client/mysql --port=3333
WARNING: Forcing protocol to TCP due to option specification. Please explicitly state intended protocol.
ERROR 2002 (HY000): Can't connect to server on 'localhost' (111)
> ../client/mysql --port=3333 --socket=sss
ERROR 2002 (HY000): Can't connect to local server through socket 'sss' (2)
> ../client/mysql --socket=sss --port=3333
ERROR 2002 (HY000): Can't connect to local server through socket 'sss' (2)
Some notable things:
- One gets a warning if one uses just --port if config file sets socket
- Using port and socket gives no warning
- Using socket and then port still uses socket
This patch changes things the following ways:
If --port= is given on the command line, the the protocol is automatically
changed to "TCP/IP".
- If --socket= is given on the command line, the protocol is automatically
changed to "socket".
- The last option wins
- No warning is given if protocol changes automatically.
For compatibility reasons, add the option to the MariaDB client without
any functional changes besides simply accepting the option and emitting
a warning that it is obsolete.
In MySQL this security related option is compulsory in certain use
cases. When users switch to MariaDB, this client command that used to
work starts failing without a sensible error message. In worst case
users resort to re-installing the mysql client from MySQL.
In MariaDB the option is obsolete and should simply be ignored. Users
however don't have any opportunity to learn that unless the client
program tells them so.
Before:
mysql --enable-cleartext-plugin ...
mysql: unknown option '--enable-cleartext-plugin'
(program terminates)
After:
mysql --enable-cleartext-plugin ...
WARNING: option '--enable-cleartext-plugin' is obsolete.
(program executes)
All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.
New Feature:
============
Extend mariadb-binlog command-line tool to allow for filtering
events using GTID domain and server ids. The functionality mimics
that of a replica server’s DO_DOMAIN_IDS, IGNORE_DOMAIN_IDS, and
IGNORE_SERVER_IDS from CHANGE MASTER TO. For completeness, this
patch additionally adds the option --do-server-ids as an alias for
--server-id, which now accepts a list of server ids instead of a
single one.
Example usage:
mariadb-binlog --do-domain-ids=2,3,4 --do-server-ids=1,3
master-bin.000001
Functional Notes:
1. --do-domain-ids cannot be combined with --ignore-domain-ids
2. --do-server-ids cannot be combined with --ignore-server-ids
3. A domain id filter can be combined with a server id filter
4. When any new filter options are combined with the
--gtid-strict-mode option, events from excluded domains/servers are
not validated.
5. Domain/server id filters can be combined with GTID ranges (i.e.
specifications of --start-position and --stop-position). However,
because the --stop-position option implicitly undertakes filtering
to only output events within its range of domains, when combined
with --do-domain-ids or --ignore-domain-ids, output will consist of
the intersection between the filters. Specifically, with
--do-domain-ids and --stop-position, only events with domain ids
present in both argument lists will be output. Conversely, with
--ignore-domain-ids and --stop-position, only events with domain ids
present in the --stop-position and absent from the
--ignore-domain-ids options will be output.
Reviewed By
============
Andrei Elkin <andrei.elkin@mariadb.com>
MDEV-27107 prevent two mariadb-upgrade running in parallel
MDEV-27279 mariadb_upgrade add --check-if-upgrade-is-needed /
restrict tests to major version
Code is based of pull request from Daniel Black, but with a several
extensions.
- mysql_upgrade now locks the mysql_upgrade file with my_lock()
(Advisory record locking). This ensures that two mysql_upgrades
cannot be run in parallel.
- Added --check-if-upgrade-is-needed to mysql_upgrade. This will return
0 if one has to run mysql_upgrade.
Other changes:
- mysql_upgrade will now immediately exit if the major version and minor
version (two first numbers in the version string) is same as last run.
Before this change mysql_upgrade was run if the version string was different
from last run.
- Better messages when there is no need to run mysql_upgrade.
- mysql_upgrade --verbose now prints out a lot more information about
the version checking.
- mysql_upgrade --debug now uses default debug arguments if there is no
option to --debug
- "MySQL" is renamed to MariaDB in the messages
- mysql_upgrade version increased to 2.0
Notes
Verifying "prevent two mariadb-upgrade running in parallel" was
done in a debugger as it would be a bit complex to do that in mtr.
Reviewer: Danial Black <daniel@mariadb.org>
Based on Aleksey Midenkov's patch
mysqldump changes:
* --as-of option specifies historical point;
* query forging protection for --as-of parameter.
system versioned tables are detected by querying I_S.TABLES:
* it transfers much less data when the full table definition is not needed
* it does not give false positives on x TEXT DEFAULT 'WITH SYSTEM VERSIONING'
This fixed the MySQL bug# 20338 about misuse of double underscore
prefix __WIN__, which was old MySQL's idea of identifying Windows
Replace it by _WIN32 standard symbol for targeting Windows OS
(both 32 and 64 bit)
Not that connect storage engine is not fixed in this patch (must be
fixed in "upstream" branch)
Problem:
=======
MariaDB's command line utilities (e.g., mysql,
mysqldump, etc) silently ignore connection
property options (e.g., --port and --socket)
when protocol is not explicitly set via the
command-line for localhost connections.
Fix:
===
If connection properties are specified without a
protocol, override the protocol to be consistent.
For example, if --port is specified, automatically
set protocol=tcp.
Caveats:
=======
* When multiple connection properties are
specified, nothing is overridden
* If protocol is is set via the command-line,
its value is used
Reviewers:
========
Sergei Golubchik <serg@mariadb.com>
Vladislav Vaintroub <wlad@mariadb.com>
In main.index_merge_myisam we remove the test that was added in
commit a2d24def8c because
it duplicates the test case that was added in
commit 5af12e4635.
Cherry-pick the commits the mysql and some changes.
WL#4618 RBR: extended table metadata in the binary log
This patch extends Table Map Event. It appends some new fields for
more metadata. The new metadata includes:
- Signedness of Numberic Columns
- Character Set of Character Columns and Binary Columns
- Column Name
- String Value of SET Columns
- String Value of ENUM Columns
- Primary Key
- Character Set of SET Columns and ENUM Columns
- Geometry Type
Some of them are optional, the patch introduces a GLOBAL system
variable to control it. It is binlog_row_metadata.
- Scope: GLOBAL
- Dynamic: Yes
- Type: ENUM
- Values: {NO_LOG, MINIMAL, FULL}
- Default: NO_LOG
Only Signedness, character set and geometry type are logged if it is MINIMAL.
Otherwise all of them are logged.
Also add a binlog_type_info() to field, So that we can have extract
relevant binlog info from field.
There are two options when coping S3 tables with mysqldump
(there is startup option --copy_s3_tables, boolean, default no)
1) Ignore all tables with engine S3, as the data is already safe in S3 and any
computer where you restore the backup will automatically discover the S3 table.
2) Copy the table as a normal table with the following 2 changes:
- Change ENGINE=S3 to ENGINE=ARIA;
- After copy add to log 'ALTER TABLE table_name ENGINE=S3'
Server and command line tools now support option --tls_version to specify the
TLS version between client and server. Valid values are TLSv1.0, TLSv1.1, TLSv1.2, TLSv1.3
or a combination of them. E.g.
--tls_version=TLSv1.3
--tls_version=TLSv1.2,TLSv1.3
In case there is a gap between versions, the lowest version will be used:
--tls_version=TLSv1.1,TLSv1.3 -> Only TLSv1.1 will be available.
If the used TLS library doesn't support the specified TLS version, it will use
the default configuration.
Limitations:
SSLv3 is not supported. The default configuration doesn't support TLSv1.0 anymore.
TLSv1.3 protocol currently is only supported by OpenSSL 1.1.0 (client and server) and
GnuTLS 3.6.5 (client only).
Overview of TLS implementations and protocols
Server:
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| WolfSSL | TLSv1.1, TLSv1,2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
Client (MariaDB Connector/C)
+-----------+-----------------------------------------+
| Library | Supported TLS versions |
+-----------+-----------------------------------------+
| GnuTLS | (TLSv1.0), TLSv1.1, TLSv1.2, TLSv1.3 |
+-----------+-----------------------------------------+
| Schannel | (TLSv1.0), TLSv1.1, TLSv1.2 |
+-----------+-----------------------------------------+
| OpenSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
| LibreSSL | (TLSv1.0), TLSv1.1, TLSv1,2, TLSv1.3 |
+-----------+-----------------------------------------+
The patches features an optional shutdown behavior to hold on until
after all connected slaves have been sent the last binlogged event.
The connected slave is one whose START SLAVE has been acknowledged and
that was not stopped since that though it could be technically
reconnecting in background.
The solution therefore disallows killing the dump thread until is has
found EOF of the latest binlog file. It is up to the shutdown
requester (DBA) to set up a sufficiently large shutdown timeout value
for shudown to wait patiently until lagging behind slaves have been
synchronized. On the other hand if a specific slave needs exclusion
from synchronization the DBA would have to stop it manually which
would terminate its dump thread.
`mysqladmin shutdown' is extended with a `--wait_for_all_slaves' option
which translates to `SHUTDOW WAIT FOR ALL SLAVES' sql query
to enable the feature on the client side.
The patch also performs a small refactoring of the server shutdown
around close_connections() to introduce kill thread phases which
are two as of current.
Allow to exclude certain databases from an --all-databases dump,
e.g. to be able to do
mysqldump --all-databases --ignore-database=mysql
to dump everything but the system tables.
Main problem was that no log-event print function checked for disk
full error on the IO_CACHE.
All changes in this patch only affects mysqlbinlog, not the server!
- Changed all log-event print functions to return 1 on error
- Fixed memory usage when not using --flashback.
- Added printing of number of rows in row events. Can be disabled with
--print-row-count=0
- Print annotated rows when using mysqlbinlog --short-form
- Fixed that mysqlbinlog --debug works
- Fixed create_drop_binlog.test test failure
- Reorganized fields in PRINT_EVENT_INFO to be according to size to
optimize storage
- Don't change print_row_event_position or print_row_counts if set by user
- Remove some testing of argument to my_free is 0
- base64-output=never is now supported and works in all context
- Updated help information for --base64-output and --short-form
- print_row_count is now on by default. Reset automatically if --short-form
is used
- Removed obsolote warning for mysql 5.6.0
- More DBUG_PRINT for mysqltest.cc
- my_b_write_byte() now checks for flush failures. This fixed a memory
overrun on disk full
- my_b_printf() now returns 1 on failure, 0 on ok. This simplifies code
and no old code was using the old return value of my_b_printf().
- my_b_Write_backtick_quote() now returns 1 on failure and 0 on ok
- Fixed some error conditions in log printing that was not previously
handled.
- Slave_rows_error_report() can now handle longlong positions
- Write_on_release_cache() rewritten so that we can detect errors
on flush. Not depending on automatic release anymore.
- Changed types for Pos and End_log_pos to 64 bit in SHOW BINLOG EVENTS
- Fixed that copy_event_cache_to_string_and_reinit() works with strings
longer than 4G (Changed to use LEX_STRING instead of String)
- Restricted binlog_rows_event_max_size to UINT32_MAX-1 as String's are
anyway restricted to UINT32_MAX
- Fixed bug in rpl_binlog_state::write_to_iocache() which hide write
failures (duplicate variable name)
- Fixed bug in String::append if original string was not allocated
- Stop mysqlbinlog output at once if there is an error.
- Before printing error message, flush result file. This ensures that
the error message is printed last. (Easier to find)
MYSQL_OPT_SSL_MODE option introduced.
It is set in case of --ssl-mode=REQUIRED and permits only SSL connection.
(cherry picked from commit 3b2d28578c526f347f5cfe763681eff365731f99)
==== Description ====
Flashback can rollback the instances/databases/tables to an old snapshot.
It's implement on Server-Level by full image format binary logs (--binlog-row-image=FULL), so it supports all engines.
Currently, it’s a feature inside mysqlbinlog tool (with --flashback arguments).
Because the flashback binlog events will store in the memory, you should check if there is enough memory in your machine.
==== New Arguments to mysqlbinlog ====
--flashback (-B)
It will let mysqlbinlog to work on FLASHBACK mode.
==== New Arguments to mysqld ====
--flashback
Setup the server to use flashback. This enables binary log in row mode
and will enable extra logging for DDL's needed by flashback feature
==== Example ====
I have a table "t" in database "test", we can compare the output with "--flashback" and without.
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" > /tmp/1.sql
#client/mysqlbinlog /data/mysqldata_10.0/binlog/mysql-bin.000001 -vv -d test -T t --start-datetime="2013-03-27 14:54:00" -B > /tmp/2.sql
Then, importing the output flashback file (/tmp/2.log), it can flashback your database/table to the special time (--start-datetime).
And if you know the exact postion, "--start-postion" is also works, mysqlbinlog will output the flashback logs that can flashback to "--start-postion" position.
==== Implement ====
1. As we know, if binlog_format is ROW (binlog-row-image=FULL in 10.1 and later), all columns value are store in the row event, so we can get the data before mis-operation.
2. Just do following things:
2.1 Change Event Type, INSERT->DELETE, DELETE->INSERT.
For example:
INSERT INTO t VALUES (...) ---> DELETE FROM t WHERE ...
DELETE FROM t ... ---> INSERT INTO t VALUES (...)
2.2 For Update_Event, swapping the SET part and WHERE part.
For example:
UPDATE t SET cols1 = vals1 WHERE cols2 = vals2
--->
UPDATE t SET cols2 = vals2 WHERE cols1 = vals1
2.3 For Multi-Rows Event, reverse the rows sequence, from the last row to the first row.
For example:
DELETE FROM t WHERE id=1; DELETE FROM t WHERE id=2; ...; DELETE FROM t WHERE id=n;
--->
DELETE FROM t WHERE id=n; ...; DELETE FROM t WHERE id=2; DELETE FROM t WHERE id=1;
2.4 Output those events from the last one to the first one which mis-operation happened.
For example:
