fil_space_t::recv_size: New member: recovered tablespace size in pages;
0 if no size change was read from the redo log,
or if the size change was implemented.
fil_space_set_recv_size(): New function for setting space->recv_size.
innodb_data_file_size_debug: A debug parameter for setting the system
tablespace size in recovery even when the redo log does not contain
any size changes. It is hard to write a small test case that would
cause the system tablespace to be extended at the critical moment.
recv_parse_log_rec(): Note those tablespaces whose size is being changed
by the redo log, by invoking fil_space_set_recv_size().
innobase_init(): Correct an error message, and do not require a larger
innodb_buffer_pool_size when starting up with a smaller innodb_page_size.
innobase_start_or_create_for_mysql(): Allow startup with any initial
size of the ibdata1 file if the autoextend attribute is set. Require
the minimum size of fixed-size system tablespaces to be 640 pages,
not 10 megabytes. Implement innodb_data_file_size_debug.
open_or_create_data_files(): Round the system tablespace size down
to pages, not to full megabytes, (Our test truncates the system
tablespace to more than 800 pages with innodb_page_size=4k.
InnoDB should not imagine that it was truncated to 768 pages
and then overwrite good pages in the tablespace.)
fil_flush_low(): Refactored from fil_flush().
fil_space_extend_must_retry(): Refactored from
fil_extend_space_to_desired_size().
fil_mutex_enter_and_prepare_for_io(): Extend the tablespace if
fil_space_set_recv_size() was called.
The test case has been successfully run with all the
innodb_page_size values 4k, 8k, 16k, 32k, 64k.
The changes are deliberately kept minimal
- some functions are made global instead of static (they will be used in
xtrabackup later on)
- functions got additional parameter, deliberately unused for now :
fil_load_single_tablespaces
srv_undo_tablespaces_init
- Global variables added, also unused for now :
srv_archive_recovery
srv_archive_recovery_limit_lsn
srv_apply_log_only
srv_backup_mode
srv_close_files
- To make xtrabackup link with sql.lib on Windows, added some missing
source files to sql.lib
- Fixed os_thread_ret_t to be DWORD on Windows
Analysis: By design InnoDB was reading first page of every .ibd file
at startup to find out is tablespace encrypted or not. This is
because tablespace could have been encrypted always, not
encrypted newer or encrypted based on configuration and this
information can be find realible only from first page of .ibd file.
Fix: Do not read first page of every .ibd file at startup. Instead
whenever tablespace is first time accedded we will read the first
page to find necessary information about tablespace encryption
status.
TODO: Add support for SYS_TABLEOPTIONS where all table options
encryption information included will be stored.
Analysis: Problem was that in fil_read_first_page we do find that
table has encryption information and that encryption service
or used key_id is not available. But, then we just printed
fatal error message that causes above assertion.
Fix: When we open single table tablespace if it has encryption
information (crypt_data) store this crypt data to the table
structure. When we open a table and we find out that tablespace
is not available, check has table a encryption information
and from there is encryption service or used key_id is not available.
If it is, add additional warning for SQL-layer.
Analysis: Problem was that when a new tablespace is created a default
encryption info is also created and stored to the tablespace. Later a
new encryption information was created with correct key_id but that
does not affect on IV.
Fix: Push encryption mode and key_id to lower levels and create
correct encryption info when a new tablespace is created.
This fix does not contain test case because, currently incorrect
encryption key causes page corruption and a lot of error messages
to error log causing mtr to fail.
Analysis: Problem is that both encrypted tables and compressed tables use
FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION to store
required metadata. Furhermore, for only compressed tables currently
code skips compression.
Fixes:
- Only encrypted pages store key_version to FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION,
no need to fix
- Only compressed pages store compression algorithm to FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION,
no need to fix as they have different page type FIL_PAGE_PAGE_COMPRESSED
- Compressed and encrypted pages now use a new page type FIL_PAGE_PAGE_COMPRESSED_ENCRYPTED and
key_version is stored on FIL header offset FIL_PAGE_FILE_FLUSH_LSN_OR_KEY_VERSION and compression
method is stored after FIL header similar way as compressed size, so that first
FIL_PAGE_COMPRESSED_SIZE is stored followed by FIL_PAGE_COMPRESSION_METHOD
- Fix buf_page_encrypt_before_write function to really compress pages if compression is enabled
- Fix buf_page_decrypt_after_read function to really decompress pages if compression is used
- Small style fixes
Analysis: Problem was that we did try to read from tablespace
that was being dropped.
Fixed by introducing a new function to find a tablespace only
if it is not being dropped currently and adding this check
before trying to read pages from tablespace.
Analysis: At fil_spage_get_space there is small change that space
is found from tablespace list but we have not yet created node
for it (and added it to space->chain) and as we hold fil_system
mutex here fil_node_create can't continue.
Fixed by allowing UT_LIST_GET_LEN(space->chain) == 0|| 1 and
introducint two new functions that access filespace list
and before returning space check that node is also created.
Step 2:
-- Introduce temporal memory array to buffer pool where to allocate
temporary memory for encryption/compression
-- Rename PAGE_ENCRYPTION -> ENCRYPTION
-- Rename PAGE_ENCRYPTION_KEY -> ENCRYPTION_KEY
-- Rename innodb_default_page_encryption_key -> innodb_default_encryption_key
-- Allow enable/disable encryption for tables by changing
ENCRYPTION to enum having values DEFAULT, ON, OFF
-- In create table store crypt_data if ENCRYPTION is ON or OFF
-- Do not crypt tablespaces having ENCRYPTION=OFF
-- Store encryption mode to crypt_data and redo-log
Step 1:
-- Remove page encryption from dictionary (per table
encryption will be handled by storing crypt_data to page 0)
-- Remove encryption/compression from os0file and all functions
before that (compression will be added to buf0buf.cc)
-- Use same CRYPT_SCHEME_1 for all encryption methods
-- Do some code cleanups to confort InnoDB coding style
Merge Facebook commit f981a51a47519b0ba527917887f8adc6df9ae147
authored by Steaphan Greene from https://github.com/facebook/mysql-5.6.
This just moves some structure definitions from inside a
single .cc file to a shared .h file, with a few tweaks to
allow these structures to be shared.
On its own, it should have no actual effect. This is needed later.
Merged lp:maria/maria-10.0-galera up to revision 3880.
Added a new functions to handler API to forcefully abort_transaction,
producing fake_trx_id, get_checkpoint and set_checkpoint for XA. These
were added for future possiblity to add more storage engines that
could use galera replication.
buf0buf.cc line 2642.
Analysis: innodb_compression_algorithm is a global variable and
can change while we are building page compressed page. This could
lead page corruption.
Fix: Cache innodb_compression_algorithm on local variable before
doing any compression or page formating to avoid concurrent
change. Improved page verification on debug builds.
Analysis: InnoDB writes also files that do not contain FIL-header.
This could lead incorrect analysis on os_fil_read_func function
when it tries to see is page page compressed based on FIL_PAGE_TYPE
field on FIL-header. With bad luck uncompressed page that does
not contain FIL-headed, the byte on FIL_PAGE_TYPE position could
indicate that page is page comrpessed.
Fix: Upper layer must indicate is file space page compressed
or not. If this is not yet known, we need to read the FIL-header
and find it out. Files that we know that are not page compressed
we can always just provide FALSE.
Added option to disable multi-threaded flush with innodb_use_mtflush = 0
option, by default multi-threaded flush is used.
Updated innochecksum tool, still it does not support new checksums.
support ha_innodb.so as a dynamic plugin.
* remove obsolete *,innodb_plugin.rdiff files
* s/--plugin-load=/--plugin-load-add=/
* MYSQL_PLUGIN_IMPORT glob_hostname[]
* use my_error instead of push_warning_printf(ER_DEFAULT)
* don't use tdc_size and tc_size in a module
update test cases (XtraDB is 5.6.14, InnoDB is 5.6.10)
* copy new tests over
* disable some tests for (old) InnoDB
* delete XtraDB tests that no longer apply
small compatibility changes:
* s/HTON_EXTENDED_KEYS/HTON_SUPPORTS_EXTENDED_KEYS/
* revert unnecessary InnoDB changes to make it a bit closer to the upstream
fix XtraDB to compile on Windows (both as a static and a dynamic plugin)
disable XtraDB on Windows (deadlocks) and where no atomic ops are available (e.g. CentOS 5)
storage/innobase/handler/ha_innodb.cc:
revert few unnecessary changes to make it a bit closer to the original InnoDB
storage/innobase/include/univ.i:
correct the version to match what it was merged from
