Now the actual binlog position for each commit is stored in THD, and XtraDB
can fetch the correct value from within commit_ordered() or commit().
mysql-test/r/group_commit_binlog_pos.result:
Test case for XtraDB binlog position.
mysql-test/t/group_commit_binlog_pos-master.opt:
Test case for XtraDB binlog position.
mysql-test/t/group_commit_binlog_pos.test:
Test case for XtraDB binlog position.
sql/log.cc:
Save binlog position corresponding to commit in THD, and make accessible to storage engine.
sql/sql_parse.cc:
Add generic crash point for use in test cases.
storage/xtradb/handler/ha_innodb.cc:
Update to use new method of getting current binlog position that works with group commit.
storage/xtradb/handler/ha_innodb.h:
Update to use new method of getting current binlog position that works with group commit.
replication aborts
When recieving a 'SLAVE STOP' command, slave SQL thread will roll back the
transaction and stop immidiately if there is only transactional table updated,
even through 'CREATE|DROP TEMPOARY TABLE' statement are in it. But These
statements can never be rolled back. Because the temporary tables to the user
session mapping remain until 'RESET SLAVE', Therefore it will abort SQL thread
with an error that the table already exists or doesn't exist, when it restarts
and executes the whole transaction again.
After this patch, SQL thread always waits till the transaction ends and then stops,
if 'CREATE|DROP TEMPOARY TABLE' statement are in it.
mysql-test/extra/rpl_tests/rpl_stop_slave.test:
Auxiliary file which is used to test this bug.
mysql-test/suite/rpl/t/rpl_stop_slave.test:
Test case for this bug.
sql/slave.cc:
Checking if OPTION_KEEP_LOG is set. If it is set, SQL thread should wait
until the transaction ends.
sql/sql_parse.cc:
Add a debug point for testing this bug.
sql/sql_parse.cc:
Make some not commonly used functions with big local variables to separate functions to make default stack usage smaller.
Decrease size of db_buff[] (Was bigger than needed)
Allocate current_global_status_var with malloc().
storage/maria/ha_maria.cc:
Don't allocate HA_CHECK on stack (it's > 100K)
storage/maria/ma_check.c:
Removed duplicated code
sql/field.cc:
Remove feature of 'new_mode' that was never implemtented in a newer MySQL version.
sql/item_cmpfunc.cc:
Boyer more is stable; Don't have to be protected by --skip-new anymore
sql/mysqld.cc:
Don't disable some proven stable functions with --skip-new
sql/records.cc:
Don't disable record caching with --safe-mode anymore
sql/sql_delete.cc:
Do fast truncate even if --skip-new or --safe is used
sql/sql_parse.cc:
Use always mysql_optimizer() for optimizer (instead of mysql_recreate_table() in case of --safe or --skip-new)
sql/sql_select.cc:
Don't disable 'only_eq_ref_tables' if --safe is used.
sql/sql_yacc.yy:
Removed not meaningfull test of --old
Don't do UNDO or REDO on a crashed table.
More DBUG_PRINT
sql/sql_parse.cc:
Remove display of 'packet' which is not useful
storage/maria/ma_blockrec.c:
More DBUG_PRINT()
storage/maria/ma_key_recover.c:
Write page number instead of page position
storage/maria/ma_recovery.c:
Write message to stderr if recovery is not likely to succeed because we don't log records for batch inserts.
In normal cases this should never be an issue as we would recreate an empty table if MariaDB dies under batch insert.
This warning will be given if you remove all tables and try to recreate them with maria_read_log, which can't be done as
the log doesn't contain all data.
Don't do UNDO or REDO on a crashed table.
storage/maria/ma_write.c:
Write page number instead of page position.
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
Nicer output from mysql_upgrade and mysql_check
Updated all arrays that used NAME_LEN to use SAFE_NAME_LEN to ensure that we don't break things accidently as names can now have a #mysql50# prefix.
client/mysql_upgrade.c:
If we are using verbose, also run mysqlcheck in verbose mode.
client/mysqlcheck.c:
Add more information if running in verbose mode
Print 'Needs upgrade' instead of complex error if table needs to be upgraded
Don't write connect information if verbose is not 2 or above
mysql-test/r/drop.result:
Updated test and results as we now support full table names
mysql-test/r/grant.result:
Now you get a correct error message if using #mysql with paths
mysql-test/r/show_check.result:
Update results as table names can temporarly be bigger than NAME_LEN (during upgrade)
mysql-test/r/upgrade.result:
Test upgrade for long table names.
mysql-test/suite/funcs_1/r/is_tables_is.result:
Updated old test result (had note been updated in a while)
mysql-test/t/drop.test:
Updated test and results as we now support full table names
mysql-test/t/grant.test:
Now you get a correct error message if using #mysql with paths
mysql-test/t/upgrade.test:
Test upgrade for long table names.
sql/ha_partition.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/item.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/log_event.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/mysql_priv.h:
Added SAFE_NAME_LEN
sql/rpl_filter.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sp_head.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_acl.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_base.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_connect.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_parse.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_prepare.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_select.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_show.cc:
NAME_LEN -> SAFE_NAME_LEN
Enlarge table names for SHOW TABLES to also include optional #mysql50#
sql/sql_table.cc:
Fall back to use ALTER TABLE for engines that doesn't support REPAIR when doing repair for upgrade.
sql/sql_trigger.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_udf.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/sql_view.cc:
NAME_LEN -> SAFE_NAME_LEN
sql/table.cc:
Fixed check_table_name() to not count #mysql50# as part of name
If #mysql50# is part of the name, don't allow path characters in name.
- Changed to still use bcmp() in certain cases becasue
- Faster for short unaligneed strings than memcmp()
- Bettern when using valgrind
- Changed to use my_sprintf() instead of sprintf() to get higher portability for old systems
- Changed code to use MariaDB version of select->skip_record()
- Removed -%::SCCS/s.% from Makefile.am:s to remove automake warnings
'CREATE TABLE IF NOT EXISTS ... SELECT' behaviour
BUG#55474, BUG#55499, BUG#55598, BUG#55616 and BUG#55777 are fixed
in this patch too.
This is the 5.1 part.
It implements:
- if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
- Insert nothing and binlog nothing on master if the existing object
is a view. It only generates a warning that table already exists.
mysql-test/r/trigger.result:
Ather this patch, 'CREATE TABLE IF NOT EXISTS ... SELECT' will not
insert anything if the creating table already exists and is a view.
sql/sql_class.h:
Declare virtual function write_to_binlog() for select_insert.
It's used to binlog 'create select'
sql/sql_insert.cc:
Implement write_to_binlog();
Use write_to_binlog() instead of binlog_query() to binlog the statement.
if the table exists, binlog two events: CREATE TABLE IF NOT EXISTS
and INSERT ... SELECT
sql/sql_lex.h:
Declare create_select_start_with_brace and create_select_pos.
They are helpful for binlogging 'create select'
sql/sql_parse.cc:
Do nothing on master if the existing object is a view.
sql/sql_yacc.yy:
Record the relative postion of 'SELECT' in the 'CREATE ...SELECT' statement.
Record whether there is a '(' before the 'SELECT' clause.
/*![:version:] Query Code */, where [:version:] is a sequence of 5
digits representing the mysql server version(e.g /*!50200 ... */),
is a special comment that the query in it can be executed on those
servers whose versions are larger than the version appearing in the
comment. It leads to a security issue when slave's version is larger
than master's. A malicious user can improve his privileges on slaves.
Because slave SQL thread is running with SUPER privileges, so it can
execute queries that he/she does not have privileges on master.
This bug is fixed with the logic below:
- To replace '!' with ' ' in the magic comments which are not applied on
master. So they become common comments and will not be applied on slave.
- Example:
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /*!99999 ,(3)*/
will be binlogged as
'INSERT INTO t1 VALUES (1) /*!10000, (2)*/ /* 99999 ,(3)*/
mysql-test/suite/rpl/t/rpl_conditional_comments.test:
Test the patch for this bug.
sql/mysql_priv.h:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_lex.cc:
To replace '!' with ' ' in the magic comments which are not applied on
master.
sql/sql_lex.h:
Remove the const limitation on parameter buff, as it can be modified in the function since
this patch.
Add member function yyUnput for Lex_input_stream. It set a character back the query buff.
sql/sql_parse.cc:
Rename inBuf as rawBuf and remove the const limitation.
sql/sql_partition.cc:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/sql_partition.h:
Remove the const limitation on parameter part_buff, as it can be modified in the function since
this patch.
sql/table.h:
Remove the const limitation on variable partition_info, as it can be modified since
this patch.
Fix warnings flagged by the new warning option -Wunused-but-set-variable
that was added to GCC 4.6 and that is enabled by -Wunused and -Wall. The
option causes a warning whenever a local variable is assigned to but is
later unused. It also warns about meaningless pointer dereferences.
client/mysql.cc:
Meaningless pointer dereferences.
client/mysql_upgrade.c:
Check whether reading from the file succeeded.
extra/comp_err.c:
Unused.
extra/yassl/src/yassl_imp.cpp:
Skip instead of reading data that is discarded.
include/my_pthread.h:
Variable is only used in debug builds.
include/mysys_err.h:
Add new error messages.
mysys/errors.c:
Add new error message for permission related functions.
mysys/mf_iocache.c:
Variable is only checked under THREAD.
mysys/my_copy.c:
Raise a error if chmod or chown fails.
mysys/my_redel.c:
Raise a error if chmod or chown fails.
regex/engine.c:
Use a equivalent variable for the assert.
server-tools/instance-manager/instance_options.cc:
Unused.
sql/field.cc:
Unused.
sql/item.cc:
Unused.
sql/log.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
Adjust doxygen comment to the right function.
Pass message lenght to log function.
sql/mysqld.cc:
Do not ignore the return value of freopen: only set buffer if
reopening succeeds.
sql/partition_info.cc:
Unused.
sql/slave.cc:
No need to set pointer to the address of '\0'.
sql/spatial.cc:
Unused. Left for historical purposes.
sql/sql_acl.cc:
Unused.
sql/sql_base.cc:
Pointers are always set to the same variables.
sql/sql_parse.cc:
End statement if reading fails.
Store the buffer after it has actually been updated.
sql/sql_repl.cc:
No need to set pointer to the address of '\0'.
sql/sql_show.cc:
Put variable under the same ifdef block.
sql/udf_example.c:
Set null pointer flag appropriately.
storage/csv/ha_tina.cc:
Meaningless dereferences.
storage/example/ha_example.cc:
Return the error since it's available.
storage/myisam/mi_locking.c:
Remove unused and dead code.
concurrently execute the statement XA START 'x', then mysqld
server could crash.
sql/sql_class.cc:
xid_cache_insert: added checking for element in cache before
insert it, return TRUE if such element already exists.
sql/sql_parse.cc:
mysql_execute_command modified:
* sequence of calls to xid_cache_search(..)/xid_cache_insert(...)
replaced by call to xid_cache_insert(...) in alternative
'case SQLCOM_XA_START:'
* added comment to alternative 'case SQLCOM_XA_COMMIT:'.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
mysql-test/include/rpl_diff_tables.inc:
Diff the same table between master and slaves.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->variables.current_user is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->variables.current_user, if it exists
sql/sql_class.h:
On slave SQL thread, thd->variables.current_user is used to store the applying event's
invoker.
DROP USER
RENAME USER CURRENT_USER() ...
GRANT ... TO CURRENT_USER()
REVOKE ... FROM CURRENT_USER()
ALTER DEFINER = CURRENT_USER() EVENTbut, When these statements are binlogged, CURRENT_USER() just is binlogged
as 'CURRENT_USER()', it is not expanded to the real user name. When slave
executes the log event, 'CURRENT_USER()' is expand to the user of slave
SQL thread, but SQL thread's user name always NULL. This breaks the replication.
After this patch, session's user will be written into query log events
if these statements call CURREN_USER() or 'ALTER EVENT' does not assign a definer.
mysql-test/include/diff_tables.inc:
Expend its abilities.
Now it can diff not only in sessions of 'master' and 'slave', but
other sessions as well.
sql/log_event.cc:
session's user will be written into Query_log_event, if is_current_user_used() is TRUE.
On slave SQL thread, Only thd->invoker is written into Query_log_event,
if it exists.
sql/sql_acl.cc:
On slave SQL thread, grantor should copy from thd->invoker, if it exists
sql/sql_class.h:
On slave SQL thread, thd->invoker is used to store the applying event's
invoker.
strict aliasing violations.
One somewhat major source of strict-aliasing violations and
related warnings is the SQL_LIST structure. For example,
consider its member function `link_in_list` which takes
a pointer to pointer of type T (any type) as a pointer to
pointer to unsigned char. Dereferencing this pointer, which
is done to reset the next field, violates strict-aliasing
rules and might cause problems for surrounding code that
uses the next field of the object being added to the list.
The solution is to use templates to parametrize the SQL_LIST
structure in order to deference the pointers with compatible
types. As a side bonus, it becomes possible to remove quite
a few casts related to acessing data members of SQL_LIST.
sql/handler.h:
Use the appropriate template type argument.
sql/item.cc:
Remove now-unnecessary cast.
sql/item_subselect.cc:
Remove now-unnecessary casts.
sql/item_sum.cc:
Use the appropriate template type argument.
Remove now-unnecessary cast.
sql/mysql_priv.h:
Move SQL_LIST structure to sql_list.h
Use the appropriate template type argument.
sql/sp.cc:
Remove now-unnecessary casts.
sql/sql_delete.cc:
Use the appropriate template type argument.
Remove now-unnecessary casts.
sql/sql_derived.cc:
Remove now-unnecessary casts.
sql/sql_lex.cc:
Remove now-unnecessary casts.
sql/sql_lex.h:
SQL_LIST now takes a template type argument which must
match the type of the elements of the list. Use forward
declaration when the type is not available, it is used
in pointers anyway.
sql/sql_list.h:
Rename SQL_LIST to SQL_I_List. The template parameter is
the type of object that is stored in the list.
sql/sql_olap.cc:
Remove now-unnecessary casts.
sql/sql_parse.cc:
Remove now-unnecessary casts.
sql/sql_prepare.cc:
Remove now-unnecessary casts.
sql/sql_select.cc:
Remove now-unnecessary casts.
sql/sql_show.cc:
Remove now-unnecessary casts.
sql/sql_table.cc:
Remove now-unnecessary casts.
sql/sql_trigger.cc:
Remove now-unnecessary casts.
sql/sql_union.cc:
Remove now-unnecessary casts.
sql/sql_update.cc:
Remove now-unnecessary casts.
sql/sql_view.cc:
Remove now-unnecessary casts.
sql/sql_yacc.yy:
Remove now-unnecessary casts.
storage/myisammrg/ha_myisammrg.cc:
Remove now-unnecessary casts.
Some of the server implementations don't support dates later
than 2038 due to the internal time type being 32 bit.
Added checks so that the server will refuse dates that cannot
be handled by either throwing an error when setting date at
runtime or by refusing to start or shutting down the server if
the system date cannot be stored in my_time_t.
Fixed some bugs introduced in 5.1.47
Disabled some tests until we have merged with latest Xtradb
configure.in:
Added testing if valgrind/memcheck.h exists
storage/pbxt/src/ha_pbxt.cc:
LOCK_plugin is not anymore locked in init
Problem: one with SELECT privilege on some table may dump other table
performing COM_TABLE_DUMP command due to missed check of the table name.
Fix: check the table name.
sql/sql_parse.cc:
Fix for bug #53907: Table dump command can be abused to dump arbitrary tables.
- check given table name performing COM_TABLE_DUMP command.
tests/mysql_client_test.c:
Fix for bug #53907: Table dump command can be abused to dump arbitrary tables.
- test case.
This fixes a recently introduced regression, where a variable is
not defined for the embedded server. Although the embedded server
is not supported in 5.0, make it at least compile.
Item_hex_string::Item_hex_string
The status of memory allocation in the Lex_input_stream (called
from the Parser_state constructor) was not checked which led to
a parser crash in case of the out-of-memory error.
The solution is to introduce new init() member function in
Parser_state and Lex_input_stream so that status of memory
allocation can be returned to the caller.
mysql-test/r/error_simulation.result:
Added a test case for bug #42064.
mysql-test/t/error_simulation.test:
Added a test case for bug #42064.
mysys/my_alloc.c:
Added error injection code for the regression test.
mysys/my_malloc.c:
Added error injection code for the regression test.
mysys/safemalloc.c:
Added error injection code for the regression test.
sql/event_data_objects.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/mysqld.cc:
Added error injection code for the regression test.
sql/sp.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_lex.cc:
Moved memory allocation from constructor to the separate init()
member function.
Added error injection code for the regression test.
sql/sql_lex.h:
Moved memory allocation from constructor to the separate init()
member function.
sql/sql_parse.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_partition.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_prepare.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_trigger.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures.
sql/sql_view.cc:
Use the new init() member function of Parser_state and check
its return value to handle memory allocation failures..
sql/thr_malloc.cc:
Added error injection code for the regression test.
This patch fixes two problems described as follows:
1 - If there is an on-going transaction and a temporary table is created or
dropped, any failed statement that follows the "create" or "drop commands"
triggers a rollback and by consequence the slave will go out sync because
the binary log will have a wrong sequence of events.
To fix the problem, we changed the expression that evaluates when the
cache should be flushed after either the rollback of a statment or
transaction.
2 - When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options. For that reason, if
the transaction had updated only transactional engines and was rolled
back at the end (.e.g due to a deadlock) the changes were not written
to the binary log, including the creation of the temporary table.
To fix the problem, we have set the OPTION_KEEP_LOG into the thd->options
when a "CREATE TEMPORARY TABLE SELECT * FROM" is executed.
sql/log.cc:
Reorganized the code based on the following functions:
- bool ending_trans(const THD* thd, const bool all);
- bool trans_has_updated_non_trans_table(const THD* thd);
- bool trans_has_no_stmt_committed(const THD* thd, const bool all);
- bool stmt_has_updated_non_trans_table(const THD* thd);
sql/log.h:
Added functions to organize the code in log.cc.
sql/log_event.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/log_event_old.cc:
Removed the OPTION_KEEP_LOG since it must be used only when
creating and dropping temporary tables.
sql/sql_parse.cc:
When a "CREATE TEMPORARY TABLE SELECT * FROM" was executed the
OPTION_KEEP_LOG was not set into the thd->options.
To fix the problem, we have set the OPTION_KEEP_LOG into the
thd->options when a "CREATE TEMPORARY TABLE SELECT * FROM"
is executed.
MySQL handles the join syntax "JOIN ... USING( field1,
... )" and natural joins by building the same parse tree as
a corresponding join with an "ON t1.field1 = t2.field1 ..."
expression would produce. This parse tree was not cleaned up
properly in the following scenario. If a thread tries to
lock some tables and finds that the tables were dropped and
re-created while waiting for the lock, it cleans up column
references in the statement by means a per-statement free
list. But if the statement was part of a stored procedure,
column references on the stored procedure's free list
weren't cleaned up and thus contained pointers to freed
objects.
Fixed by adding a call to clean up the current prepared
statement's free list.
This is a backport from MySQL 5.1
This is the 5.1 merge and extension of the fix.
The server was happily accepting paths in table name in all places a table
name is accepted (e.g. a SELECT). This allowed all users that have some
privilege over some database to read all tables in all databases in all
mysql server instances that the server file system has access to.
Fixed by :
1. making sure no path elements are allowed in quoted table name when
constructing the path (note that the path symbols are still valid in table names
when they're properly escaped by the server).
2. checking the #mysql50# prefixed names the same way they're checked for
path elements in mysql-5.0.
The server was not checking the supplied to COM_FIELD_LIST table name
for validity and compliance to acceptable table names standards.
Fixed by checking the table name for compliance similar to how it's
normally checked by the parser and returning an error message if
it's not compliant.
The server could be tricked to read packets indefinitely if it
received a packet larger than the maximum size of one packet.
This problem is aggravated by the fact that it can be triggered
before authentication.
The solution is to no skip big packets for non-authenticated
sessions. If a big packet is sent before a session is authen-
ticated, a error is returned and the connection is closed.
include/mysql_com.h:
Add skip flag. Only used in server builds.
sql/net_serv.cc:
Control whether big packets can be skipped.
Problem: "COM_FIELD_LIST is an old command of the MySQL server, before there was real move to only
SQL. Seems that the data sent to COM_FIELD_LIST( mysql_list_fields() function) is not
checked for sanity. By sending long data for the table a buffer is overflown, which can
be used deliberately to include code that harms".
Fix: check incoming data length.
sql/sql_parse.cc:
Fix for bug #53237: mysql_list_fields/COM_FIELD_LIST stack smashing
- check incoming mysql_list_fields() table name arg length.
sql/sql_base.cc:
Replace strmov() with strnmov() to remove the possibility for buffer overflow.
sql/sql_parse.cc:
Reject COM_FIELD_LIST with too-big table or wildcard argument.
(libmysqlclient doesn't allow sending too long arguments anyway, but we
need this to protect against buffer overflow exploits).
Docs/sp-imp-spec.txt:
New sql_mode added.
include/my_base.h:
Flag in frm of create options.
libmysqld/CMakeLists.txt:
New files added.
libmysqld/Makefile.am:
New files added.
mysql-test/r/events_bugs.result:
New sql_mode added.
mysql-test/r/information_schema.result:
New sql_mode added.
mysql-test/r/sp.result:
New sql_mode added.
mysql-test/r/system_mysql_db.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql.result:
New sql_mode added.
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
New sql_mode added.
mysql-test/t/events_bugs.test:
New sql_mode added.
mysql-test/t/sp.test:
New sql_mode added.
scripts/mysql_system_tables.sql:
New sql_mode added.
scripts/mysql_system_tables_fix.sql:
New sql_mode added.
sql/CMakeLists.txt:
New files added.
sql/Makefile.am:
New files added.
sql/event_db_repository.cc:
New sql_mode added.
sql/field.cc:
Create options support added.
sql/field.h:
Create options support added.
sql/ha_partition.cc:
Create options support added.
sql/handler.cc:
Create options support added.
sql/handler.h:
Create options support added.
sql/log_event.h:
New sql_mode added.
sql/mysql_priv.h:
New sql_mode added.
sql/mysqld.cc:
New sql_mode added.
sql/share/errmsg.txt:
New error messages added.
sql/sp.cc:
New sql_mode added.
sql/sp_head.cc:
Create options support added.
sql/sql_class.cc:
Create options support added.
Debug added.
sql/sql_class.h:
Create options support added.
sql/sql_insert.cc:
my_safe_a* moved to mysqld_priv.h
sql/sql_lex.h:
Create options support added.
sql/sql_parse.cc:
Create options support added.
sql/sql_show.cc:
Create options support added.
sql/sql_table.cc:
Create options support added.
sql/sql_view.cc:
New sql_mode added.
sql/sql_yacc.yy:
Create options support added.
sql/structs.h:
Create options support added.
sql/table.cc:
Create options support added.
sql/table.h:
Create options support added.
sql/unireg.cc:
Create options support added.
storage/example/ha_example.cc:
Create options example.
storage/example/ha_example.h:
Create options example.
storage/pbxt/src/discover_xt.cc:
Create options support added.
Makefile.am:
add new API files to the check_abi rule,
remove duplicates
client/CMakeLists.txt:
now a client can use dlopen too
client/Makefile.am:
be csh-friendly
include/my_global.h:
add dummy plugs for dlopen and co.
for the code that needs them to work in static builds
mysys/Makefile.am:
be csh-friendly
plugin/auth/dialog.c:
typo fixed
If the listed columns in the view definition of
the table used in a 'INSERT .. SELECT ..'
statement mismatched, a debug assertion would
trigger in the cache invalidation code
following the failing statement.
Although the find_field_in_view() function
correctly generated ER_BAD_FIELD_ERROR during
setup_fields(), the error failed to propagate
further than handle_select(). This patch fixes
the issue by adding a check for the return
value.
mysql-test/r/query_cache_with_views.result:
* added test for bug 46615
mysql-test/t/query_cache_with_views.test:
* added test for bug 46615
sql/sql_parse.cc:
* added check for handle_select() return code before attempting to invalidate the cache.
sql/sql_class.cc:
reset userstat_running after the data were colleced to prevent double accounting.
don't assert for COM_QUERY, many more are possible.
don't update_stats() here, it's too late, lex->sql_command may be already reset
sql/sql_parse.cc:
update_stats() here, when the current arena is still valid
Fixed bug in Yassle to get correct error messages in case of errors
Provide better error messages in case of ssl connect failure
Updated out-of-date ssl certificates to fix failing mysql-test-system (certificates now active for 10 years)
Fixed bug in query_cache that could cause asserts and hangs in DEBUG builds.
Fixed bug where one connection did not see changes done by another connection.
configure.in:
Changed version number from RC to stable
extra/yassl/src/yassl_error.cpp:
Fixed bug in Yassle to get correct error messages in case of errors
- 'error' is an enum that hold more error numbers than the enum was defined for
include/violite.h:
Added error output string for sslaccept() and sslconnect() to get reason for connect failure
mysql-test/mysql-test-run.pl:
Write failed test cases if mysql-test-run fails because of too many errors
mysql-test/r/grant.result:
Update results to reflect new certificates
mysql-test/r/openssl_1.result:
Update results to reflect new certificates
mysql-test/std_data/cacert.pem:
Update ssl certificate
mysql-test/std_data/client-cert.pem:
Update ssl certificate
mysql-test/std_data/client-key.pem:
Update ssl certificate
mysql-test/std_data/server-cert.pem:
Update ssl certificate
mysql-test/std_data/server-key.pem:
Update ssl certificate
mysql-test/t/grant.test:
Update test to reflect new certificates
mysql-test/t/openssl_1.test:
Update test to reflect new certificates
mysql-test/t/query_cache_debug.test:
Remove 'big_test' as test is now fast
sql-common/client.c:
Give a better error message if ssl connect fails
sql/net_serv.cc:
Fixed compiler warnings
sql/slave.cc:
Give a better error message in logs if ssl connect fails
sql/sql_cache.cc:
debug_wait_for_kill() now removes the set watch variable after kill signal
This is needed as invalidate_table() may be called twice for one query.
Ensure that net->query_cache_query is reset after query. This fixes assert in
query_cache_end_of_result() if query_cache_query holds results from previous query.
Removed DBUG_ASSERT(0), as this code can be run by query_cache_debug.test
sql/sql_connect.cc:
Give a better error message if ssl connect fails
sql/sql_parse.cc:
Fixed bug where one connection did not see changes done by another connection.
For statements that changes tables, close_thread_tables() MUST be called before
sending OK as a table handler may not make the changes available for other connections
before unlock_tables().
vio/viossl.c:
Give a better error message if ssl connect fails
To 5.x Release
Notes
=====
This is a backport of BUG#23300 into 5.1 GA.
Original cset revid (in betony):
luis.soares@sun.com-20090929140901-s4kjtl3iiyy4ls2h
Description
===========
When using replication, the slave will not log any slow query
logs queries replicated from the master, even if the
option "--log-slow-slave-statements" is set and these take more
than "log_query_time" to execute.
In order to log slow queries in replicated thread one needs to
set the --log-slow-slave-statements, so that the SQL thread is
initialized with the correct switch. Although setting this flag
correctly configures the slave thread option to log slow queries,
there is an issue with the condition that is used to check
whether to log the slow query or not. When replaying binlog
events the statement contains the SET TIMESTAMP clause which will
force the slow logging condition check to fail. Consequently, the
slow query logging will not take place.
This patch addresses this issue by removing the second condition
from the log_slow_statements as it prevents slow queries to be
binlogged and seems to be deprecated.
in multitable delete/subquery
SQL_BUFFER_RESULT should not have an effect on non-SELECT
statements according to our documentation.
Fixed by not passing it through to multi-table DELETE (similarly
to how it's done for multi-table UPDATE).
Rename method as to not hide a base.
Reorder attributes initialization.
Remove unused variable.
Rework code to silence a warning due to assignment used as truth value.
sql/item_strfunc.cc:
Rename method as to not hide a base.
sql/item_strfunc.h:
Rename method as to not hide a base.
sql/log_event.cc:
Reorder attributes initialization.
sql/rpl_injector.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/rpl_record.cc:
Remove unused variable.
sql/sql_db.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/sql_parse.cc:
Rework code to silence a warning due to assignment used as truth value.
sql/sql_table.cc:
Rework code to silence a warning due to assignment used as truth value.
- Marked a couple of tests with --big
- Fixed xtradb/handler/ha_innodb.cc to call explain_filename()
storage/xtradb/handler/ha_innodb.cc:
Call explain_filename() to get proper names for partitioned tables
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
mysql-test/r/rpl_drop_temp.result:
Updated for the patch of bug#49137.
mysql-test/t/rpl_drop_temp.test:
Added the test file to verify if DROP MULTI TEMPORARY TABLE
will cause different errors on master and slave, when one or
more of these tables do not exist.
sql/log_event.cc:
Added code to handle above cases which are
removed from sql_parse.cc
sql/sql_parse.cc:
Remove the code to issue the 'Unknown table' error,
if the temporary table does not exist when dropping
it on slave. The above cases decribed in comments
will be handled later in log_event.cc.
REORGANIZE PARTITION
There were several problems which lead to this this,
all related to bad error handling.
1) There was several bugs preventing the ddl-log to be used for
cleaning up created files on error.
2) The error handling after the copy partition rows did not close
and unlock the tables, resulting in deletion of partitions
which were in use, which lead InnoDB to put the partition to
drop in a background queue.
sql/ha_partition.cc:
Bug#47343: InnoDB fails to clean-up after lock wait timeout on
REORGANIZE PARTITION
Better error handling, if partition has been created/opened/locked
then make sure it is unlocked and closed before returning error.
The delete of the newly created partition is handled by the ddl-log.
sql/sql_parse.cc:
Bug#47343: InnoDB fails to clean-up after lock wait timeout on
REORGANIZE PARTITION
Fix a bug found when experimenting, thd could really be NULL here,
as mentioned in the function header.
sql/sql_partition.cc:
Bug#47343: InnoDB fails to clean-up after lock wait timeout on
REORGANIZE PARTITION
Used the correct .frm shadow name to put into the ddl-log.
Really use the ddl-log to handle errors.
sql/sql_table.cc:
Bug#47343: InnoDB fails to clean-up after lock wait timeout on
REORGANIZE PARTITION
Fixes of the ddl-log when used as error recovery (no crash).
When executing an entry from memory (not read from disk)
the name_len was not set correctly.
'CREATE TABLE IF NOT EXISTS ... SELECT' statement were causing 'CREATE
TEMPORARY TABLE ...' to be written to the binary log in row-based
mode (a.k.a. RBR), when there was a temporary table with the same name.
Because the 'CREATE TABLE ... SELECT' statement was executed as
'INSERT ... SELECT' into the temporary table. Since in RBR mode no
other statements related to temporary tables are written into binary log,
this sometimes broke replication.
This patch changes behavior of 'CREATE TABLE [IF NOT EXISTS] ... SELECT ...'.
it ignores existence of temporary table with the
same name as table being created and is interpreted
as attempt to create/insert into base table. This makes behavior of
'CREATE TABLE [IF NOT EXISTS] ... SELECT' consistent with
how ordinary 'CREATE TABLE' and 'CREATE TABLE ... LIKE' behave.
In certain rare cases when a process was interrupted
during a FLUSH PRIVILEGES operation the diagnostic
area would be set to an error state but the function
responsible for the operation would still signal
success. This would lead to a debug assertion error
later on when the server would attempt to reset the
DA before sending the error message.
This patch fixes the issue by assuring that
reload_acl_and_cache() always fails if an error
condition is raised.
The second issue was that a KILL could cause
a console error message which referred to a DA
state without first making sure that such a
state existed.
This patch fixes this issue in two different
palces by first checking DA state before
fetching the error message.
sql/sql_acl.cc:
* Make sure that there is an error to print before attempting to do so.
* Minor style change: change 1 to TRUE for clarity.
sql/sql_parse.cc:
* Always fail reload_acl_and_cache() if the query was killed.
sql/sql_servers.cc:
* Make sure that there is an error to print before attempting to do so.
MySQL handles the join syntax "JOIN ... USING( field1,
... )" and natural joins by building the same parse tree as
a corresponding join with an "ON t1.field1 = t2.field1 ..."
expression would produce. This parse tree was not cleaned up
properly in the following scenario. If a thread tries to
lock some tables and finds that the tables were dropped and
re-created while waiting for the lock, it cleans up column
references in the statement by means a per-statement free
list. But if the statement was part of a stored procedure,
column references on the stored procedure's free list weren't
cleaned up and thus contained pointers to freed objects.
Fixed by adding a call to clean up the current prepared
statement's free list.
mysql-test/r/sp_sync.result:
Bug#48157: Test case
mysql-test/t/sp_sync.test:
Bug#48157: Test result
sql/item.h:
Bug#48157: Commented field.
sql/sql_parse.cc:
Bug#48157: Commented function.
sql/sql_update.cc:
Bug#48157: fix
In statement-based or mixed-mode replication, use DROP TEMPORARY TABLE
to drop multiple tables causes different errors on master and slave,
when one or more of these tables do not exist. Because when executed
on slave, it would automatically add IF EXISTS to the query to ignore
all ER_BAD_TABLE_ERROR errors.
To fix the problem, do not add IF EXISTS when executing DROP TEMPORARY
TABLE on the slave, and clear the ER_BAD_TABLE_ERROR error after
execution if the query does not expect any errors.
mysql-test/suite/rpl/r/rpl_drop_temp.result:
Updated for the patch of bug#49137.
mysql-test/suite/rpl/t/rpl_drop_temp.test:
Added the test file to verify if DROP MULTI TEMPORARY TABLE
will cause different errors on master and slave, when one or
more of these tables do not exist.
sql/log_event.cc:
Added code to handle above cases which are
removed from sql_parse.cc
sql/sql_parse.cc:
Remove the code to issue the 'Unknown table' error,
if the temporary table does not exist when dropping
it on slave. The above cases decribed in comments
will be handled later in log_event.cc.
The problem is a somewhat common misusage of the strmake function.
The strmake(dst, src, len) function writes at most /len/ bytes to
the string pointed to by src, not including the trailing null byte.
Hence, if /len/ is the exact length of the destination buffer, a
one byte buffer overflow can occur if the length of the source
string is equal to or greater than /len/.
client/mysqldump.c:
Make room for the trailing null byte.
libmysql/libmysql.c:
Add comment, there is enough room in the buffer.
Increase buffer length, two strings are concatenated.
libmysqld/lib_sql.cc:
Make room for the trailing null byte.
mysys/default.c:
Make room for the trailing null bytes.
mysys/mf_pack.c:
Make room for the trailing null byte.
server-tools/instance-manager/commands.cc:
Copy only if overflow isn't possible in both cases.
server-tools/instance-manager/listener.cc:
Make room for the trailing null byte.
sql/log.cc:
Make room for the trailing null byte.
sql/sp_pcontext.h:
Cosmetic fix.
sql/sql_acl.cc:
MAX_HOSTNAME already specifies space for the trailing null byte.
sql/sql_parse.cc:
Make room for the trailing null byte.
sql/sql_table.cc:
Make room for the trailing null byte.
Don't use static link by default (in compile-pentium) as some new systems doesn't have all static libraries available
Change type for functions in plugin.h:str_mysql_ftparser_param() to const unsigned char and string lengths to size_t.
One effect of the above change is that one needs to include mysql_global.h or define size_t before including plugin.h
This fixes a case where mysql_client_test failed with newer gcc that enables strict-aliasing by default
BUILD/compile-pentium:
Don't use static link by default as some new systems doesn't have all static libraries available
client/mysql_upgrade.c:
Remove not used variable
cmd-line-utils/readline/config_readline.h:
Define some constants to get rid of compiler warnings on Linux
cmd-line-utils/readline/display.c:
Get rid of compiler warnings
cmd-line-utils/readline/history.c:
Got rid of compiler warnings:
- Defining some strings as const
- Added cast
cmd-line-utils/readline/rlmbutil.h:
Added cast to get rid of compiler warnings
cmd-line-utils/readline/text.c:
Remove not needed initialization to get rid of compiler warnings
cmd-line-utils/readline/xmalloc.c:
Changed types to 'const char* to get rid of compiler warnings
configure.in:
Ensure that we use MariaDB as suffix
include/mysql/plugin.h:
Changed types to 'const unsigned char* to get rid of compiler warnings (in other parts of the code)
Change length for not \0 terminated string to size_t
include/mysql/plugin.h.pp:
Update related to plugin.h
libmysql/libmysql.c:
Fixed bug that caused core dump with newer gcc when strict aliasing is not turned off
mysql-test/t/information_schema.test:
Test is depending on innodb
mysql-test/t/not_partition.test:
Fixed wrong directory name
(Not noticed before as we don't ususally run this test)
mysys/lf_hash.c:
Got rid of compiler warnings from -Wstrict-aliasing
mysys/my_redel.c:
Removed not used variable
regex/engine.c:
Changed types to 'const char* to get rid of compiler warnings
regex/engine.ih:
Changed types to 'const char* to get rid of compiler warnings
sql/sp_head.cc:
Got rid of compiler warning from -Wstrict-aliasing
sql/sql_base.cc:
Got rid of compiler warnings from -Wstrict-aliasing
(The original code was probably wrong as nj_col->table_field was
sql/sql_builtin.cc.in:
plugin.h needs to have size_t defined
sql/sql_parse.cc:
Remove used variable
sql/sql_select.cc:
Got rid of compiler warnings from -Wstrict-aliasing
sql/sql_show.cc:
Added #ifdef to get rid of compiler warning when not using partition engine
sql/table.cc:
Got rid of compiler warning from -Wstrict-aliasing
storage/maria/ha_maria.cc:
Got rid of compiler warnings from -Wstrict-aliasing:
- Use the thd_killed() API function
storage/maria/lockman.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/maria/ma_check.c:
Got rid of compiler warnings from -Wstrict-aliasing
Change to use new version of _ma_killed_ptr; Don't call it as often as before
storage/maria/ma_check_standalone.h:
Update to compatible _ma_killed_ptr() from ha_maria.cc
storage/maria/ma_ft_boolean_search.c:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/maria/ma_ft_nlq_search.c:
Got rid of compiler warnings from -Wstrict-aliasing
Ensure that 'subkeys' is 32 bit
storage/maria/ma_ft_parser.c:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/maria/ma_ftdefs.h:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/maria/ma_sort.c:
Change to use new version of _ma_killed_ptr; Don't call it as often as before
storage/maria/ma_state.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/maria/maria_def.h:
Redefine ma_killed_ptr()
storage/maria/maria_ftdump.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/maria/trnman.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/myisam/ft_boolean_search.c:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/myisam/ft_nlq_search.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/myisam/ft_parser.c:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/myisam/ft_stopwords.c:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/myisam/ftdefs.h:
Changed pointers from char -> const char* and length to size_t (to get rid of compiler warnings and casts)
storage/myisam/ha_myisam.cc:
Got rid of compiler warnings from -Wstrict-aliasing:
- Use the thd_killed() API function
storage/myisam/mi_check.c:
Use new killed_ptr() function
storage/myisam/myisam_ftdump.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/myisam/myisamchk.c:
Update to compatible killed_ptr() from ha_myisam.cc
storage/myisam/myisamdef.h:
Redefine killed_ptr()
storage/myisam/myisamlog.c:
Got rid of compiler warnings from -Wstrict-aliasing
storage/myisam/sort.c:
Change to use new version of killed_ptr; Don't call it as often as before
storage/xtradb/fil/fil0fil.c:
Fixedc ompiler warning
storage/xtradb/trx/trx0i_s.c:
Include mysql_plugin.h later to ensure that size_t is defined
- Moved some code from innodb_plugin to xtradb, to ensure that all tests runs
- Did changes in pbxt and maria storage engines becasue of changes in thd->query
- Reverted wrong code in sql_table.cc for how ROW_FORMAT is used.
This is a re-commit of Monty's merge to eliminate an extra commit from
MySQL-5.1.42 that was accidentally included in the merge.
This is a merge of the MySQL 5.1.41 clone-off (clone-5.1.41-build). In
case there are any extra changes done before final MySQL 5.1.41
release, these will need to be merged later before MariaDB 5.1.41
release.
CURRENT_USER() in GRANT ... TO CURRENT_USER() only gave us a definer,
not a full user (i.e., password-element was not initiliazed). Hence
dereferencing the password led to a crash.
Properly initializes definers now, just so there are no misunderstandings.
Also does some magic so IDENTIFIED BY ... works with CURRENT_USER().
mysql-test/r/grant2.result:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
mysql-test/t/grant2.test:
Show GRANT ... TO CURRENT_USER() no longer crashes.
Show it to work with IDENTIFIED BY to boot.
sql/sql_acl.cc:
Make IDENTIFIED BY ... work with CURRENT_USER()
sql/sql_parse.cc:
Zero password-part of definer just in case somebody mistakes this for
a complete LEX_USER!
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
- Added checking of return value for system(), freopen(), fgets() and chown()
- Ensure that calls that require a format strings gets a format string
- Other trivial things
Updated test suite results (especially for pbxt and embedded server)
Removed warning for "Invalid (old?) table or database name 'mysqld.1'" from pbxt tests
Speed up some pbxt tests by inserting begin ; commit; around "while loops with inserts"
Added mysqld startup option '--debug-flush'
Create maria_recovery.trace in data directory instead of current directory
client/mysql.cc:
Check return value from system()
client/mysql_upgrade.c:
Check return value from fgets()
client/mysqladmin.cc:
Check return value from fgets()
client/mysqlslap.c:
Check return value from system() (but ignore it, as it's not critical)
extra/yassl/src/crypto_wrapper.cpp:
Check return value from fgets() (but ignore it, as it's internal file)
extra/yassl/taocrypt/src/aes.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/blowfish.cpp:
Added extra {} to remove compiler warning
extra/yassl/taocrypt/src/misc.cpp:
Ifdef not used code
include/mysys_err.h:
Added error message for failing chown()
mysql-test/mysql-test-run.pl:
Don't give warning for skipping ndbcluster (never enabled in MariaDB)
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Update with new information schema information
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
New test
mysql-test/suite/funcs_1/r/is_tables_myisam_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/r/is_tables_mysql_embedded.result:
Update test results (has not been tested for a long time)
mysql-test/suite/funcs_1/t/is_tables_is.test:
Don't run with embedded server (as results differ)
I added a new test for embedded server
mysql-test/suite/funcs_1/t/is_tables_is_embedded.test:
New test
mysql-test/suite/pbxt/my.cnf:
Allow one to run pbxt tests without having to specify --mysqld=--default-storage-engine=pbxt
mysql-test/suite/pbxt/t/count_distinct3.test:
Speed up test by inserting begin; ... commit;
mysql-test/suite/pbxt/t/subselect.test:
Speed up test by inserting begin; ... commit;
mysys/errors.c:
Added error message for failing chown()
mysys/my_copy.c:
Added error message for failing chown()
mysys/my_redel.c:
Added error message for failing chown()
mysys/safemalloc.c:
Added cast to get rid of compiler warning
sql/ha_partition.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/log.cc:
Test return value of freopen()
sql/mysqld.cc:
Test return value of freopen()
Added startup option '--debug-flush' to be used when one gets a core dump (easy to explain to people on IRC)
sql/rpl_rli.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/set_var.cc:
Added {} to get rid of compiler warnings
sql/slave.cc:
Fixed wrong argument to mi->report() and sql_print...() (they require a format string)
sql/sql_cache.cc:
Fixed wrong argument to sql_printinformation() (it requires a format string)
sql/sql_parse.cc:
Test return value of fgets()
sql/sql_plugin.cc:
Fixed wrong argument to sql_print_error() (it requires a format string)
sql/sql_select.cc:
Use unique table name for internal temp tables instead of full path
(Simple speed & space optimization)
sql/udf_example.c:
Removed compiler warning about not used variable
storage/maria/ha_maria.cc:
Fixed wrong argument to sql_print_error() and ma_check_print_error() (they require a format string)
storage/maria/ma_recovery.c:
Create maria_recovery.trace in data directory instead of current directory
storage/maria/unittest/ma_test_loghandler-t.c:
Fixed wrong argument to ok(); Requires a format string
storage/pbxt/src/strutil_xt.cc:
Detect temporary tables by checking if that path for the table is in the mysql data directory.
The database for temporary tables is after this patch, from PBXT point of view, ""
This is needed to stop PBXT from calling filename_to_tablename() with the base directory as an argument, which caused
ERROR: Invalid (old?) table or database name 'mysqld.1'" in the log when running the test suite.
tests/mysql_client_test.c:
Fixed compiler warnings
unittest/mysys/base64-t.c:
Fixed wrong argument to diag() (it requires a format string)
Added a comment that the current 'print' of differing buffers doesn't print the right thing,
but didn't fix this as it's not important (unless we find a bug in the real code)
The original code comes, as far as I know, from Google (Mark Callaghan's team) with additional work from Percona, Ourdelta and Weldon Whipple.
This code provides the same functionallity, but with a lot of changes to make it faster and better fit the MariaDB infrastucture.
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_sent, Rows_read
Added new variable / startup option 'userstat' to control if user statistics should be enabled or not
Added my_getcputime(); Returns cpu time used by this thread.
New FLUSH commands:
- FLUSH SLOW QUERY LOG
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
New SHOW commands:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
New Information schemas:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Added support for all new flush commands to mysqladmin
Added handler::ha_... wrappers for all handler read calls to do statistics counting
- Changed all code to use new ha_... calls
- Count number of read rows, changed rows and rows read trough an index
Added counting of number of bytes sent to binary log (status variable Binlog_bytes_written)
Added counting of access denied errors (status variable Access_denied_erors)
Bugs fixed:
- Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
- CLOCK_GETTIME was not propely working on Linuxm
client/mysqladmin.cc:
Added support for all new flush commmands and some common combinations:
flush-slow-log
flush-table-statistics
flush-index-statistics
flush-user-statistics
flush-client-statistics
flush-all-status
flush-all-statistics
configure.in:
Added checking if clock_gettime needs the librt.
(Fixes Bug #37639 clock_gettime is never used/enabled in Linux/Unix)
include/my_sys.h:
Added my_getcputime()
include/mysql_com.h:
Added LIST_PROCESS_HOST_LEN & new REFRESH target defines
mysql-test/r/information_schema.result:
New information schema tables added
mysql-test/r/information_schema_all_engines.result:
New information schema tables added
mysql-test/r/information_schema_db.result:
New information schema tables added
mysql-test/r/log_slow.result:
Added testing that flosh slow query logs is accepted
mysql-test/r/status_user.result:
Basic testing of user, client, table and index statistics
mysql-test/t/log_slow.test:
Added testing that flosh slow query logs is accepted
mysql-test/t/status_user-master.opt:
Ensure that we get a fresh restart before running status_user.test
mysql-test/t/status_user.test:
Basic testing of user, client, table and index statistics
mysys/my_getsystime.c:
Added my_getcputime()
Returns cpu time used by this thread.
sql/authors.h:
Updated authors to have core and original MySQL developers first.
sql/event_data_objects.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/event_db_repository.cc:
Changed to use new ha_... calls
sql/filesort.cc:
Changed to use new ha_... calls
sql/ha_partition.cc:
Changed to use new ha_... calls
Fixed comment syntax
sql/handler.cc:
Changed to use new ha_... calls
Reset table statistics
Added code to update global table and index status
Added counting of rows changed
sql/handler.h:
Added table and index statistics variables
Added function reset_statistics()
Added handler::ha_... wrappers for all handler read calls to do statistics counting
Protected all normal read calls to ensure we use the new calls in the server.
Made ha_partition a friend class so that partition code can call the old read functions
sql/item_subselect.cc:
Changed to use new ha_... calls
sql/lex.h:
Added keywords for new information schema tables and flush commands
sql/log.cc:
Added flush_slow_log()
Added counting of number of bytes sent to binary log
Removed not needed test of thd (It's used before, so it's safe to use)
Added THD object to MYSQL_BIN_LOG::write_cache() to simplify statistics counting
sql/log.h:
Added new parameter to write_cache()
Added flush_slow_log() functions.
sql/log_event.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/log_event_old.cc:
Updated call to mysql_reset_thd_for_next_command()
Changed to use new ha_... calls
sql/mysql_priv.h:
Updated call to mysql_reset_thd_for_next_command()
Added new statistics functions and variables needed by these.
sql/mysqld.cc:
Added new statistics variables and structures to handle these
Added new status variables:
- Com_show_client_statistics, Com_show_index_statistics, Com_show_table_statistics, Com_show_user_statistics
- Access_denied_errors, Busy_time (clock time), Binlog_bytes_written, Cpu_time, Empty_queries, Rows_set, Rows_read
Added new option 'userstat' to control if user statistics should be enabled or not
sql/opt_range.cc:
Changed to use new ha_... calls
sql/opt_range.h:
Changed to use new ha_... calls
sql/opt_sum.cc:
Changed to use new ha_... calls
sql/records.cc:
Changed to use new ha_... calls
sql/set_var.cc:
Added variable 'userstat'
sql/sp.cc:
Changed to use new ha_... calls
sql/sql_acl.cc:
Changed to use new ha_... calls
Added counting of access_denied_errors
sql/sql_base.cc:
Added call to statistics functions
sql/sql_class.cc:
Added usage of org_status_var, to store status variables at start of command
Added functions THD::update_stats(), THD::update_all_stats()
Fixed bug in add_to_status() and add_diff_to_status() where longlong variables where threated as long
sql/sql_class.h:
Added new status variables to status_var
Moved variables that was not ulong in status_var last.
Added variables to THD for storing temporary values during statistics counting
sql/sql_connect.cc:
Variables and functions to calculate user and client statistics
Added counting of access_denied_errors and lost_connections
sql/sql_cursor.cc:
Changed to use new ha_... calls
sql/sql_handler.cc:
Changed to use new ha_... calls
sql/sql_help.cc:
Changed to use new ha_... calls
sql/sql_insert.cc:
Changed to use new ha_... calls
sql/sql_lex.h:
Added SQLCOM_SHOW_USER_STATS, SQLCOM_SHOW_TABLE_STATS, SQLCOM_SHOW_INDEX_STATS, SQLCOM_SHOW_CLIENT_STATS
sql/sql_parse.cc:
Added handling of:
- SHOW CLIENT_STATISTICS
- SHOW USER_STATISTICS
- SHOW TABLE_STATISTICS
- SHOW INDEX_STATISTICS
Added handling of new FLUSH commands:
- FLUSH SLOW QUERY LOGS
- FLUSH TABLE_STATISTICS
- FLUSH INDEX_STATISTICS
- FLUSH USER_STATISTICS
- FLUSH CLIENT_STATISTICS
Added THD parameter to mysql_reset_thd_for_next_command()
Added initialization and calls to user statistics functions
Added increment of statistics variables empty_queries, rows_sent and access_denied_errors.
Added counting of cpu time per query
sql/sql_plugin.cc:
Changed to use new ha_... calls
sql/sql_prepare.cc:
Updated call to mysql_reset_thd_for_next_command()
sql/sql_select.cc:
Changed to use new ha_... calls
Indentation changes
sql/sql_servers.cc:
Changed to use new ha_... calls
sql/sql_show.cc:
Added counting of access denied errors
Added function for new information schema tables:
- CLIENT_STATISTICS
- USER_STATISTICS
- INDEX_STATISTICS
- TABLE_STATISTICS
Changed to use new ha_... calls
sql/sql_table.cc:
Changed to use new ha_... calls
sql/sql_udf.cc:
Changed to use new ha_... calls
sql/sql_update.cc:
Changed to use new ha_... calls
sql/sql_yacc.yy:
Add new show and flush commands
sql/structs.h:
Add name_length to KEY to avoid some strlen
Added cache_name to KEY for fast storage of keyvalue in cache
Added structs USER_STATS, TABLE_STATS, INDEX_STATS
Added function prototypes for statistics functions
sql/table.cc:
Store db+table+index name into keyinfo->cache_name
sql/table.h:
Added new information schema tables
sql/tztime.cc:
Changed to use new ha_... calls
