MySQL Bug #12408412: GROUP_CONCAT + ORDER BY + INPUT/OUTPUT SAME USER VARIABLE = CRASH
and
MySQL Bug#14664077 SEVERE PERFORMANCE DEGRADATION IN SOME CASES WHEN USER VARIABLES ARE USED
sql/item_func.cc:
don't use anything from Item_func_set_user_var::fix_fields()
in Item_func_set_user_var::save_item_result()
sql/sql_class.cc:
Call suv->save_item_result(item) *before* doing suv->fix_fields(), because
the former evaluates the item (and caches its value), while the latter marks
the user variable as non-const. The problem is that the item was fix_field'ed
when the user variable was const, and it doesn't expect it to change to non-const
in the middle of the execution.
allow only three failed change_user per connection.
successful change_user do NOT reset the counter
tests/mysql_client_test.c:
make --error to work for --change_user errors
two tests still fail:
main.innodb_icp and main.range_vs_index_merge_innodb
call records_in_range() with both range ends being open
(which triggers an assert)
PROBLEM:
Threads end-up in deadlock due to locks acquired as described
below,
con1: Run Query on a table.
It is important that this SELECT must back-off while
trying to open the t1 and enter into wait_for_condition().
The SELECT then is blocked trying to lock mysys_var->mutex
which is held by con3. The very significant fact here is
that mysys_var->current_mutex will still point to LOCK_open,
even if LOCK_open is no longer held by con1 at this point.
con2: Try dropping table used in con1 or query some table.
It will hold LOCK_open and be blocked trying to lock
kernel_mutex held by con4.
con3: Try killing the query run by con1.
It will hold THD::LOCK_thd_data belonging to con1 while
trying to lock mysys_var->current_mutex belonging to con1.
But current_mutex will point to LOCK_open which is held
by con2.
con4: Get innodb engine status
It will hold kernel_mutex, trying to lock THD::LOCK_thd_data
belonging to con1 which is held by con3.
So while technically only con2, con3 and con4 participate in the
deadlock, con1's mysys_var->current_mutex pointing to LOCK_open
is a vital component of the deadlock.
CYCLE = (THD::LOCK_thd_data -> LOCK_open ->
kernel_mutex -> THD::LOCK_thd_data)
FIX:
LOCK_thd_data has responsibility of protecting,
1) thd->query, thd->query_length
2) VIO
3) thd->mysys_var (used by KILL statement and shutdown)
4) THD during thread delete.
Among above responsibilities, 1), 2)and (3,4) seems to be three
independent group of responsibility. If there is different LOCK
owning responsibility of (3,4), the above mentioned deadlock cycle
can be avoid. This fix introduces LOCK_thd_kill to handle
responsibility (3,4), which eliminates the deadlock issue.
Note: The problem is not found in 5.5. Introduction MDL subsystem
caused metadata locking responsibility to be moved from TDC/TC to
MDL subsystem. Due to this, responsibility of LOCK_open is reduced.
As the use of LOCK_open is removed in open_table() and
mysql_rm_table() the above mentioned CYCLE does not form.
Revision ID for changes,
open_table() = dlenev@mysql.com-20100727133458-m3ua9oslnx8fbbvz
mysql_rm_table() = jon.hauglid@oracle.com-20101116100012-kxep9txz2fxy3nmw
BUG#11761686 insert_id event is not filtered.
Two issues are covered.
INSERT into autoincrement field which is not the first part in the composed primary key
is unsafe by autoincrement logging design. The case is specific to MyISAM engine
because Innodb does not allow such table definition.
However no warnings and row-format logging in the MIXED mode was done, and
that is fixed.
Int-, Rand-, User-var log-events were not filtered along with their parent
query that made possible them to screw up execution context of the following
query.
Fixed with deferring their execution until the parent query.
******
Bug#11754117
Post review fixes.
mysql-test/suite/rpl/r/rpl_auto_increment_bug45679.result:
a new result file is added.
mysql-test/suite/rpl/r/rpl_filter_tables_not_exist.result:
results updated.
mysql-test/suite/rpl/t/rpl_auto_increment_bug45679.test:
regression test for BUG#11754117-45670 is added.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
regression test for filtering issue of BUG#11754117 - 45670 is added.
sql/log_event.cc:
Logics are added for deferring and executing events associated
with the Query event.
sql/log_event.h:
Interface to deferred events batch execution is added.
sql/rpl_rli.cc:
initialization for new RLI members is added.
sql/rpl_rli.h:
New members to RLI are added to facilitate deferred events gathering
and execution control;
two general character RLI cleanup methods are constructed.
sql/rpl_utility.cc:
Deferred_log_events methods are difined.
sql/rpl_utility.h:
A new class Deferred_log_events is defined to implement
IRU events gathering, execution and cleanup.
sql/slave.cc:
Necessary changes to initialize `rli->deferred_events' and prevent
deferred event deletion in the main read-exec branch.
sql/sql_base.cc:
A new safe-check function for multi-part pk with auto-increment is defined
and deployed in lock_tables().
sql/sql_class.cc:
Initialization for a new member and replication cleanups are added
to THD class.
sql/sql_class.h:
THD class receives a new member to hold a specific execution
context for slave applier.
sql/sql_parse.cc:
Execution of the deferred event in started prior to its parent query.
The result of materialization of the right part of an IN subquery predicate
is placed into a temporary table. Each row of the materialized table is
distinct. A unique key over all fields of the temporary table is defined and
created. It allows to perform key look-ups into the table.
The table created for a materialized subquery can be accessed by key as
any other table. The function best_access-path search for the best access
to join a table to a given partial join. With some where conditions this
function considers a possibility of a ref_or_null access. If such access
employs the unique key on the temporary table then when estimating
the cost this access the function tries to use the array rec_per_key. Yet,
such array is not built for this unique key. This causes a crash of the server.
Rows returned by the subquery that contain nulls don't have to be placed
into temporary table, as they cannot be match any row produced by the
left part of the subquery predicate. So all fields of the temporary table
can be defined as non-nullable. In this case any ref_or_null access
to the temporary table does not make any sense and it does not make sense
to estimate such an access.
The fix makes sure that the temporary table for a materialized IN subquery
is defined with columns that are all non-nullable. The also ensures that
any row with nulls returned by the subquery is not placed into the
temporary table.
KEY HANDLING ON SUBSEQUENT CREATE TABLE IF NOT EXISTS
PROBLEM:
--------
Consider a SP routine which does CREATE TABLE
with REFERENCES clause. The first call to this routine
invokes parser and the parsed items are cached, so as
to avoid parsing for the second execution of the routine.
It is obsevered that valgrind reports a warning
upon read of thd->lex->alter_info->key_list->Foreign_key object,
which seem to be pointing to a invalid memory address
during second time execution of the routine. Accessing this object
theoretically could cause a crash.
ANALYSIS:
---------
The problem stems from the fact that for some reason
elements of ref_columns list in thd->lex->alter_info->
key_list->Foreign_key object are changed to point to
objects allocated on runtime memory root.
During the first execution of routine we create
a copy of thd->lex->alter_info object.
As part of this process we create a clones of objects in
Alter_info::key_list and of Foreign_key object in particular.
Then Foreign_key object is cloned for some reason we
perform shallow copies of both Foreign_key::ref_columns
and Foreign_key::columns list. So new instance of
Foreign_key object starts to SHARE contents of ref_columns
and columns list with the original instance.
After that as part of cloning process we call
list_copy_and_replace_each_value() for elements of
ref_columns list. As result ref_columns lists in both
original and cloned Foreign_key object start to contain
pointers to Key_part_spec objects allocated on runtime
memory root because of shallow copy.
So when we start copying of thd->lex->alter_info object
during the second execution of stored routine we indeed
encounter pointer to the Key_part_spec object allocated
on runtime mem-root which was cleared during at the end
of previous execution. This is done in sp_head::execute(),
by a call to free_root(&execute_mem_root,MYF(0));
As result we get valgrind warnings about accessing
unreferenced memory.
FIX:
----
The safest solution to this problem is to
fix Foreign_key(Foreign_key, MEM_ROOT) constructor to do
a deep copy of columns lists, similar to Key(Key, MEM_ROOT)
constructor.
- If USER is given, all threads for that user is signaled
- If SOFT is used then the KILL will not be sent to the handler. This can be used to not interrupt critical things in the handler like 'REPAIR'.
Internally added more kill signals. This gives us more information of why a query/connection was killed.
- KILL_SERVER is used when server is going down. In this case the users gets ER_SHUTDOWN as the reason connection was killed.
- Changed signals to number in correct order, which makes it easier to test how the signal should affect the code.
- New error message ER_CONNECTION_KILLED if connection was killed by 'KILL CONNECTION'. Before we got error ER_SHUTDOWN.
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
include/mysql.h.pp:
Updated file
include/mysql_com.h:
Changed names of not used parameters KILL_QUERY & KILL_CONNCTION to mysql_kill() to not conflict with defines in the server
mysql-test/r/kill.result:
Added test of KILL USER
mysql-test/suite/rpl/r/rpl_stm_000001.result:
Updated error code
mysql-test/suite/rpl/t/rpl_stm_000001.test:
Updated error codes
mysql-test/t/flush_read_lock_kill.test:
Updated error codes
mysql-test/t/kill.test:
Added test of KILL USER
plugin/handler_socket/handlersocket/database.cpp:
Removed THD:: from KILL
sql/debug_sync.cc:
Removed THD:: from KILL
sql/event_scheduler.cc:
Removed THD:: from KILL
sql/filesort.cc:
Removed THD:: from KILL
sql/ha_ndbcluster_binlog.cc:
Removed THD:: from KILL
sql/handler.cc:
Removed THD:: from KILL
Simplify code.
sql/lex.h:
Added new keywords HARD | SOFT
sql/log.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/log_event.cc:
Removed THD:: from KILL
Added testing of new error ER_CONNECTION_KILLED
sql/mysql_priv.h:
Added new prototypes
sql/mysqld.cc:
Removed THD:: from KILL
Use KILL_SERVER_HARD signal on shutdown.
sql/scheduler.cc:
Removed THD:: from KILL
Simplify test if connection should be killed
sql/share/errmsg.txt:
New error message ER_CONNECTION_KILLED
sql/slave.cc:
Removed THD:: from KILL
sql/sp_head.cc:
Removed THD:: from KILL
sql/sql_base.cc:
Removed THD:: from KILL
sql/sql_cache.cc:
Removed THD:: from KILL
sql/sql_class.cc:
Removed THD:: from KILL
Added killed_errno()
Only signal kill to storage engine if HARD bit is set.
sql/sql_class.h:
Move KILL options out from THD to make them easier to use in sql_yacc.yy
sql/sql_connect.cc:
Removed THD:: from KILL
sql/sql_delete.cc:
Removed THD:: from KILL
sql/sql_error.cc:
Removed THD:: from KILL
sql/sql_insert.cc:
Removed THD:: from KILL
Simplifed testing if thread is killed.
sql/sql_lex.h:
Added kill options to st_lex
sql/sql_load.cc:
Removed THD:: from KILL
sql/sql_parse.cc:
Added kill options to st_lex
Simplifed and optimzed testing of thd->killed at end of query
Added support for KILL USER
Extended sql_kill() to allow use of more kill signals.
sql/sql_repl.cc:
Removed THD:: from KILL
sql/sql_show.cc:
Removed THD:: from KILL
Simplied testing if query/connection was killed
sql/sql_table.cc:
Removed THD:: from KILL
sql/sql_update.cc:
Removed THD:: from KILL
sql/sql_yacc.yy:
Added support for new KILL syntax: KILL [HARD|SOFT] [CONNECTION|QUERY] [ID | USER user_name]
storage/archive/ha_archive.cc:
Simplify compilation
storage/maria/ha_maria.cc:
Removed THD:: from KILL
Give more information when finding an error in a MyISAM table.
When killing system thread, use KILL_SYSTEM_THREAD instead of KILL_CONNECTION to make it easier to ignore the signal in sensitive context (like auto-repair)
Added new kill level: KILL_SERVER that will in the future to be used to signal killed by shutdown.
Add more warnings about killed connections when warning level > 3
include/myisamchk.h:
Added counting of printed info/notes
mysys/mf_iocache.c:
Remove duplicate assignment
sql/handler.cc:
Added test of KILL_SERVER
sql/log.cc:
Ignore new 'kill' error ER_NEW_ABORTING_CONNECTION when requesting query error code.
sql/mysqld.cc:
Add more warnings for killed connections when warning level > 3
sql/scheduler.cc:
Added checks for new kill signals
sql/slave.cc:
Ignore new kill signal ER_NEW_ABORTING_CONNECTION
sql/sp_head.cc:
Fixed assignment to bool
Added testing of new kill signals
sql/sql_base.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
sql/sql_class.cc:
Add more warnings for killed connections when warning level > 3
thd_killed() now ignores KILL_BAD_DATA and THD::KILL_SYSTEM_THREAD as these should not abort sensitive operations.
sql/sql_class.h:
Added KILL_SYSTEM_THREAD and KILL_SERVER
sql/sql_connect.cc:
Added handling of KILL_SERVER
sql/sql_insert.cc:
Use KILL_SYSTEM_THREAD to auto-kill system threads
Added handling of KILL_SERVER
sql/sql_parse.cc:
Add more warnings for killed connections when warning level > 3
Added checking that thd->abort_on_warning is reset at end of query.
sql/sql_show.cc:
Update condition for when a query is 'killed'
storage/myisam/ha_myisam.cc:
Added counting of info/notes printed
storage/myisam/mi_check.c:
Always print an an error if we find data errors when checking/repairing a MyISAM table.
When a repair was killed, don't retry repair.
Added assert if sort_get_next_record() returned an error without an error message.
Removed nonsence check "if (sort_param->read_cache.error < 0)" in repair.
storage/myisam/myisamchk.c:
Added counting of notes printed
storage/pbxt/src/thread_xt.cc:
Better error message.
For ANY subqueries NULLs should be ignored (if there is other values) when finding max min.
For ALL subqueries NULLs should be saved if they found.
Optimisation for ALL suqbueries if NULL is possible in the SELECT list with max/min aggregate function switched off.
Some test changed where NULL is not used but optimization with max/min aggregate function important so NOT NULL added.
mysql-test/r/explain.result:
Forced old optimization.
mysql-test/r/subselect.result:
Forced old optimization.
New test suite.
mysql-test/t/explain.test:
Forced old optimization.
mysql-test/t/subselect.test:
Forced old optimization.
New test suite.
sql/item_subselect.cc:
Store converted subquery type.
Switch off aggregate function optimisation for ALL and nulls.
sql/sql_class.cc:
Fixed NULL comparison.
sql/sql_class.h:
Store converted subquery type.
sql/mysqld.cc:
Log errors if thd->log_all_errors is set
sql/sql_class.cc:
Add log_all_errors
sql/sql_class.h:
Add log_all_errors
storage/myisam/ha_myisam.cc:
Write db and table name for all logged errors
Log errors also during auto_recovery
During auto_recovery, set thd->log_all_errors if log_warnings >2 to ensure that system errors are also logged to file
thd->user_connect is now handled in thd->clenup() which will ensure that it works in all context (including slaves).
I added also some DBUG_ASSERT() to ensure that things are working correctly.
sql/sql_acl.cc:
Reset thd->user_connect on failed check_for_max_user_connections() to ensure we don't decrement value twice.
Removed not needed call to decrease_user_connections() as thd->cleanup() will now do it.
sql/sql_class.cc:
Call decrease_user_connections() in thd->cleanup()
sql/sql_connect.cc:
Ensure we don't allocate thd->user_connect twice.
Simplify check_for_max_user_connections().
sql/sql_parse.cc:
Ensure that thd->user_connect is handled properly in for 'change_user' command.
There is an optimization of DISTINCT in JOIN::optimize()
which depends on THD::used_tables value. Each SELECT statement
inside SP resets used_tables value(see mysql_select()) and it
leads to wrong result. The fix is to replace THD::used_tables
with LEX::used_tables.
mysql-test/r/sp.result:
test case
mysql-test/t/sp.test:
test case
sql/sql_base.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_class.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_insert.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_lex.h:
THD::used_tables is replaced with LEX::used_tables
sql/sql_prepare.cc:
THD::used_tables is replaced with LEX::used_tables
sql/sql_select.cc:
THD::used_tables is replaced with LEX::used_tables
- The client gets a progress report message that triggers a callback function if requested with mysql_options(MYSQL_PROGRESS_CALLBACK, function)
- Added Progress field last to 'show processlist'
- Stage, Max_stage and Progress field added to information_schema.progresslist
- The 'mysql' client by defaults enables progress reports when the output is a tty.
- Added progress_report_time time variable to configure how often progress reports is sent to client
Added read only system variable 'in_transaction' which is 1 if we have executed a BEGIN statement.
client/client_priv.h:
Added OPT_REPORT_PROGRESS
client/mysql.cc:
Added option --progress-reports (on by default if not batch mode)
Progress reports is written to stdout for long running commands
include/Makefile.am:
Added mysql/service_progress_report.h
include/myisamchk.h:
Added variables to be able to do progress reporting in Aria and later in MyISAM
include/mysql.h:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql.h.pp:
Added new mysql_options() parameter: MYSQL_PROGRESS_CALLBACK
include/mysql/plugin.h:
Added functions for reporting progress.
include/mysql/plugin_auth.h.pp:
Added functions for reporting progress.
include/mysql_com.h:
Added CLIENT_PROGRESS mysql_real_connect() flag.
include/sql_common.h:
Added callback function for reporting progress
mysql-test/r/old-mode.result:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
mysql-test/suite/funcs_1/datadict/datadict_priv.inc:
Added new column
mysql-test/suite/funcs_1/datadict/processlist_priv.inc:
Test all new PROCESSLIST columns
mysql-test/suite/funcs_1/r/is_columns_is.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_columns_mysql_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/is_tables_is_embedded.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_priv_ps.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_no_prot.result:
Updated results
mysql-test/suite/funcs_1/r/processlist_val_ps.result:
Updated results
mysql-test/suite/pbxt/r/pbxt_locking.result:
Updated results
mysql-test/suite/pbxt/r/skip_name_resolve.result:
Updated results
mysql-test/t/old-mode.test:
Ensure that SHOW PROGRESSLIST doesn't have the Progress column in old mode.
plugin/handler_socket/handlersocket/Makefile.am:
Added -lmysqlservices
scripts/mytop.sh:
Made 'State' field width dynamic.
Added 'Progress' to process list display.
sql-common/client.c:
Added handling of progress messages.
Removed check_license() function.
sql/mysql_priv.h:
Added opt_progress_report_time
sql/mysqld.cc:
Added progress_report_time time variable to configure how often progress reports is sent to client
sql/protocol.cc:
Added net_send_progress_packet()
sql/protocol.h:
New prototypes
sql/set_var.cc:
Added variables progress_report_time and in_transaction
sql/sql_acl.cc:
Safety fix: Made client_capabilities ulonglong
sql/sql_class.cc:
Added interface functions for progress reporting
sql/sql_class.h:
Added varibles in THD for progress reporting.
Added CF_REPORT_PROGRESS
sql/sql_load.cc:
Added progress reporting for LOAD DATA INFILE
sql/sql_parse.cc:
Added CF_REPORT_PROGRESS for top level commands for which it's safe to send progress reports to client
sql/sql_show.cc:
Added Progress field last to 'show processlist'
Stage, Max_stage and Progress field added to information_schema.progresslist
sql/sql_table.cc:
Added progress reporting for ALTER TABLE
Added THD as argument to copy_data_between_tables()
storage/maria/ha_maria.cc:
Added progress reporting for check table, repair table, analyze table
Fixed a bug in start_bulk_insert() that caused alter table to always run with all keys enabled.
storage/maria/ma_check.c:
Added progress reporting
Remember old state before starting repair. This removes some warnings from optimize_table if create-with-sort fails.
storage/maria/ma_check_standalone.h:
Added dummy reporting function for standalone Aria programs.
storage/maria/ma_sort.c:
Added progress reporting
storage/maria/maria_chk.c:
Updated version
storage/maria/maria_def.h:
Added new prototypes
tests/mysql_client_test.c:
Added test case for progress reporting
Split status variable Rows_read to Rows_read and Rows_tmp_read so that one can see how much real data is read.
Same was done with with Handler_update and Handler_write.
Fixed bug in MEMORY tables where some variables was counted twice.
Added new internal handler call 'ha_close()' to have one place to gather statistics.
Fixed bug where thd->open_options was set to wrong value when doing admin_recreate_table()
mysql-test/r/status.result:
Updated test results and added new tests
mysql-test/r/status_user.result:
Udated test results
mysql-test/t/status.test:
Added new test for temporary table status variables
sql/ha_partition.cc:
Changed to call ha_close() instead of close()
sql/handler.cc:
Added internal_tmp_table variable for easy checking of temporary tables.
Added new internal handler call 'ha_close()' to have one place to gather statistics.
Gather statistics for internal temporary tables.
sql/handler.h:
Added handler variables internal_tmp_table, rows_tmp_read.
Split function update_index_statistics() to two.
Added ha_update_tmp_row() for faster tmp table handling with more statistics.
sql/item_sum.cc:
ha_write_row() -> ha_write_tmp_row()
sql/multi_range_read.cc:
close() -> ha_close()
sql/mysqld.cc:
New status variables: Rows_tmp_read, Handler_tmp_update and Handler_tmp_write
sql/opt_range.cc:
close() -> ha_close()
sql/sql_base.cc:
close() -> ha_close()
sql/sql_class.cc:
Added handling of rows_tmp_read
sql/sql_class.h:
Added new satistics variables.
rows_read++ -> update_rows_read() to be able to correctly count reads to internal temp tables.
Added handler::ha_update_tmp_row()
sql/sql_connect.cc:
Added comment
sql/sql_expression_cache.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_select.cc:
close() -> ha_close()
ha_update_row() -> ha_update_tmp_row()
sql/sql_show.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_table.cc:
Fixed bug where thd->open_options was set to wrong value when doing admin_recreate_table()
sql/sql_union.cc:
ha_write_row() -> ha_write_tmp_row()
sql/sql_update.cc:
ha_write_row() -> ha_write_tmp_row()
sql/table.cc:
close() -> ha_close()
storage/heap/ha_heap.cc:
Removed double counting of statistic variables.
close -> ha_close() to get tmp table statistics.
storage/maria/ha_maria.cc:
close -> ha_close() to get tmp table statistics.
If a view/derived table is non-mergeable then the definition of the tmp table
to store the rows for it is created at the prepare stage. In this case if the
view definition uses outer joins and a view column belongs to an inner table
of one of them then the column should be considered as nullable independently
on nullability of the underlying column. If the underlying column happens to be
defined as non-nullable then the function create_tmp_field_from_item rather
than the function create_tmp_field_from_field should be employed to create
the definition of the interesting column in the tmp table.
Changed the code that processing of multi-updates and multi-deletes
with multitable views at the prepare stage.
A proper solution would be: never to perform any transformations of views
before and at the prepare stage. Yet it would require re-engineering
of the code that checks privileges and updatability of views.
Ultimately this re-engineering has to be done to provide a clean solution
for INSERT/UPDATE/DELETE statements that use views.
Fixed a valgrind problem in the function TABLE::use_index.
A lot of small fixes and new test cases.
client/mysqlbinlog.cc:
Cast removed
client/mysqltest.cc:
Added missing DBUG_RETURN
include/my_pthread.h:
set_timespec_time_nsec() now only takes one argument
mysql-test/t/date_formats.test:
Remove --disable_ps_protocl as now also ps supports microseconds
mysys/my_uuid.c:
Changed to use my_interval_timer() instead of my_getsystime()
mysys/waiting_threads.c:
Changed to use my_hrtime()
sql/field.h:
Added bool special_const_compare() for fields that may convert values before compare (like year)
sql/field_conv.cc:
Added test to get optimal copying of identical temporal values.
sql/item.cc:
Return that item_int is equal if it's positive, even if unsigned flag is different.
Fixed Item_cache_str::save_in_field() to have identical null check as other similar functions
Added proper NULL check to Item_cache_int::save_in_field()
sql/item_cmpfunc.cc:
Don't call convert_constant_item() if there is nothing that is worth converting.
Simplified test when years should be converted
sql/item_sum.cc:
Mark cache values in Item_sum_hybrid as not constants to ensure they are not replaced by other cache values in compare_datetime()
sql/item_timefunc.cc:
Changed sec_to_time() to take a my_decimal argument to ensure we don't loose any sub seconds.
Added Item_temporal_func::get_time() (This simplifies some things)
sql/mysql_priv.h:
Added Lazy_string_decimal()
sql/mysqld.cc:
Added my_decimal constants max_seconds_for_time_type, time_second_part_factor
sql/table.cc:
Changed expr_arena to be of type CONVENTIONAL_EXECUTION to ensure that we don't loose any items that are created by fix_fields()
sql/tztime.cc:
TIME_to_gmt_sec() now sets *in_dst_time_gap in case of errors
This is needed to be able to detect if timestamp is 0
storage/maria/lockman.c:
Changed from my_getsystime() to set_timespec_time_nsec()
storage/maria/ma_loghandler.c:
Changed from my_getsystime() to my_hrtime()
storage/maria/ma_recovery.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/maria/unittest/trnman-t.c:
Changed from my_getsystime() to mmicrosecond_interval_timer()
storage/xtradb/handler/ha_innodb.cc:
Added support for new time,datetime and timestamp
unittest/mysys/thr_template.c:
my_getsystime() -> my_interval_timer()
unittest/mysys/waiting_threads-t.c:
my_getsystime() -> my_interval_timer()
sql/event_parse_data.cc:
don't use "not_used" variable
sql/item_timefunc.cc:
Item_temporal_func::fix_length_and_dec()
and other changes
sql/item_timefunc.h:
introducing Item_timefunc::fix_length_and_dec()
sql/share/errmsg.txt:
don't say "column X" in the error message that used not only for columns
Issue:
While running embedded server, if client issues TEE command (\T foo/bar) and
"foo/bar" directory doesn't exist, it is suppose to give error. But it was
aborting. This was happening because wrong error handler was being called.
Solution:
Modified calls to correct error handler. In embedded server case, there are
two error handler (client and server) which are supposed to be called based
on which context code is in. If it is in client context, client error handler
should be called otherwise server.
Test case:
Test case automation is not possible as current (following) code doesn't
allow '\T' to be executed from command line (OR command read from a file):
[client/mysql.cc]
...
static int
com_tee(String *buffer __attribute__((unused)),
char *line __attribute__((unused)))
{
char file_name[FN_REFLEN], *end, *param;
if (status.batch) << THIS IS TRUE WHILE EXECUTING FROM COMMAND LINE.
return 0;
...
So, not adding test case in GA. WIll add a test case in mysql-trunk after
removing above code so that this could be properly tested before GA.
libmysqld/lib_sql.cc:
Added code to call client/server error handler based on in control is in
client/server code respectively.
sql/mysql_priv.h:
Added comments for THR_THD, THR_MALLOC keys.
sql/sql_class.cc:
Function definition of new function restore_global to removes thread specific
data from stack (which was stored in store global).
sql/sql_class.h:
Function declaration of new function restore_global.
Resolved all conflicts, bad merges and fixed a few minor bugs in the code.
Commented out the queries from multi_update, view, subselect_sj, func_str,
derived_view, view_grant that failed either with crashes in ps-protocol or
with wrong results.
The failures are clear indications of some bugs in the code and these bugs
are to be fixed.
In sql_class.cc, 'row_count', of type 'ha_rows', was used as last argument for
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD which is
"Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld".
So 'ha_rows' was used as 'long'.
On SPARC32 Solaris builds, 'long' is 4 bytes and 'ha_rows' is 'longlong' i.e. 8 bytes.
So the printf-like code was reading only the first 4 bytes.
Because the CPU is big-endian, 1LL is 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01
so the first four bytes yield 0. So the warning message had "row 0" instead of
"row 1" in test outfile_loaddata.test:
-Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 1
+Warning 1366 Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 0
All error-messaging functions which internally invoke some printf-life function
are potential candidate for such mistakes.
One apparently easy way to catch such mistakes is to use
ATTRIBUTE_FORMAT (from my_attribute.h).
But this works only when call site has both:
a) the format as a string literal
b) the types of arguments.
So:
func(ER(ER_BLAH), 10);
will silently not be checked, because ER(ER_BLAH) is not known at
compile time (it is known at run-time, and depends on the chosen
language).
And
func("%s", a va_list argument);
has the same problem, as the *real* type of arguments is not
known at this site at compile time (it's known in some caller).
Moreover,
func(ER(ER_BLAH));
though possibly correct (if ER(ER_BLAH) has no '%' markers), will not
compile (gcc says "error: format not a string literal and no format
arguments").
Consequences:
1) ATTRIBUTE_FORMAT is here added only to functions which in practice
take "string literal" formats: "my_error_reporter" and "print_admin_msg".
2) it cannot be added to the other functions: my_error(),
push_warning_printf(), Table_check_intact::report_error(),
general_log_print().
To do a one-time check of functions listed in (2), the following
"static code analysis" has been done:
1) replace
my_error(ER_xxx, arguments for substitution in format)
with the equivalent
my_printf_error(ER_xxx,ER(ER_xxx), arguments for substitution in
format),
so that we have ER(ER_xxx) and the arguments *in the same call site*
2) add ATTRIBUTE_FORMAT to push_warning_printf(),
Table_check_intact::report_error(), general_log_print()
3) replace ER(xxx) with the hard-coded English text found in
errmsg.txt (like: ER(ER_UNKNOWN_ERROR) is replaced with
"Unknown error"), so that a call site has the format as string literal
4) this way, ATTRIBUTE_FORMAT can effectively do its job
5) compile, fix errors detected by ATTRIBUTE_FORMAT
6) revert steps 1-2-3.
The present patch has no compiler error when submitted again to the
static code analysis above.
It cannot catch all problems though: see Field::set_warning(), in
which a call to push_warning_printf() has a variable error
(thus, not replacable by a string literal); I checked set_warning() calls
by hand though.
See also WL 5883 for one proposal to avoid such bugs from appearing
again in the future.
The issues fixed in the patch are:
a) mismatch in types (like 'int' passed to '%ld')
b) more arguments passed than specified in the format.
This patch resolves mismatches by changing the type/number of arguments,
not by changing error messages of sql/share/errmsg.txt. The latter would be wrong,
per the following old rule: errmsg.txt must be as stable as possible; no insertions
or deletions of messages, no changes of type or number of printf-like format specifiers,
are allowed, as long as the change impacts a message already released in a GA version.
If this rule is not followed:
- Connectors, which use error message numbers, will be confused (by insertions/deletions
of messages)
- using errmsg.sys of MySQL 5.1.n with mysqld of MySQL 5.1.(n+1)
could produce wrong messages or crash; such usage can easily happen if
installing 5.1.(n+1) while /etc/my.cnf still has --language=/path/to/5.1.n/xxx;
or if copying mysqld from 5.1.(n+1) into a 5.1.n installation.
When fixing b), I have verified that the superfluous arguments were not used in the format
in the first 5.1 GA (5.1.30 'bteam@astra04-20081114162938-z8mctjp6st27uobm').
Had they been used, then passing them today, even if the message doesn't use them
anymore, would have been necessary, as explained above.
include/my_getopt.h:
this function pointer is used only with "string literal" formats, so we can add
ATTRIBUTE_FORMAT.
mysql-test/collections/default.experimental:
test should pass now
sql/derror.cc:
by having a format as string literal, ATTRIBUTE_FORMAT check becomes effective.
sql/events.cc:
Change justified by the following excerpt from sql/share/errmsg.txt:
ER_EVENT_SAME_NAME
eng "Same old and new event name"
ER_EVENT_SET_VAR_ERROR
eng "Error during starting/stopping of the scheduler. Error code %u"
sql/field.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_DISPLAYWIDTH 42000 S1009
eng "Display width out of range for column '%-.192s' (max = %lu)"
sql/ha_ndbcluster.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/ha_ndbcluster_binlog.cc:
Too many arguments for:
ER_GET_ERRMSG
eng "Got error %d '%-.100s' from %s"
Patch by Jonas Oreland.
sql/ha_partition.cc:
print_admin_msg() is used only with a literal as format, so ATTRIBUTE_FORMAT
works.
sql/handler.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
(sizeof() returns size_t)
sql/item_create.cc:
ER_TOO_BIG_SCALE 42000 S1009
eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
ER_TOO_BIG_PRECISION 42000 S1009
eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
'c_len' and 'c_dec' are char*, passed as %d !! We don't know their value
(as strtoul() failed), but they are likely big, so we use INT_MAX.
'len' is ulong.
sql/item_func.cc:
ER_WARN_DATA_OUT_OF_RANGE 22003
eng "Out of range value for column '%s' at row %ld"
ER_CANT_FIND_UDF
eng "Can't load function '%-.192s'"
sql/item_strfunc.cc:
ER_TOO_BIG_FOR_UNCOMPRESS
eng "Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)"
max_allowed_packet is ulong.
sql/mysql_priv.h:
sql_print_message_func is a function _pointer_.
sql/sp_head.cc:
ER_SP_RECURSION_LIMIT
eng "Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %.192s"
max_sp_recursion_depth is ulong
sql/sql_acl.cc:
ER_PASSWORD_NO_MATCH 42000
eng "Can't find any matching row in the user table"
ER_CANT_CREATE_USER_WITH_GRANT 42000
eng "You are not allowed to create a user with GRANT"
sql/sql_base.cc:
ER_NOT_KEYFILE
eng "Incorrect key file for table '%-.200s'; try to repair it"
ER_TOO_MANY_TABLES
eng "Too many tables; MySQL can only use %d tables in a join"
MAX_TABLES is size_t.
sql/sql_binlog.cc:
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_class.cc:
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD
eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld"
WARN_DATA_TRUNCATED 01000
eng "Data truncated for column '%s' at row %ld"
sql/sql_connect.cc:
ER_HANDSHAKE_ERROR 08S01
eng "Bad handshake"
ER_BAD_HOST_ERROR 08S01
eng "Can't get hostname for your address"
sql/sql_insert.cc:
ER_WRONG_VALUE_COUNT_ON_ROW 21S01
eng "Column count doesn't match value count at row %ld"
sql/sql_parse.cc:
ER_WARN_HOSTNAME_WONT_WORK
eng "MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work"
ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT
eng "Too high level of nesting for select"
ER_UNKNOWN_ERROR
eng "Unknown error"
sql/sql_partition.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_plugin.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_prepare.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
ER_UNKNOWN_STMT_HANDLER
eng "Unknown prepared statement handler (%.*s) given to %s"
length value (for '%.*s') must be 'int', per the doc of printf()
and the code of my_vsnprintf().
sql/sql_show.cc:
ER_OUTOFMEMORY HY001 S1001
eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_table.cc:
ER_TOO_BIG_FIELDLENGTH 42000 S1009
eng "Column length too big for column '%-.192s' (max = %lu); use BLOB or TEXT instead"
sql/table.cc:
ER_NOT_FORM_FILE
eng "Incorrect information in file: '%-.200s'"
ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error."
table->s->mysql_version is ulong.
sql/unireg.cc:
ER_TOO_LONG_TABLE_COMMENT
eng "Comment for table '%-.64s' is too long (max = %lu)"
ER_TOO_LONG_FIELD_COMMENT
eng "Comment for field '%-.64s' is too long (max = %lu)"
ER_TOO_BIG_ROWSIZE 42000
eng "Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"
