implement --ssl-fp and --ssl-fplist for all clients.
--ssl-fp takes one certificate fingerprint, for example,
00:11:22:33:44:55:66:77:88:99:AA:BB:CC:DD:EE:FF:00:11:22:33
--ssl-fplist takes a path to a file with one fingerprint per line.
if the server's certificate fingerprint matches ssl-fp or is found
in the file - the certificate is considered verified.
If the fingerprint is specified but doesn't match - the connection
is aborted independently from the --ssl-verify-server-cert
if the client enabled --ssl-verify-server-cert, then
the server certificate is verified as follows:
* if --ssl-ca or --ssl-capath were specified, the cert must have
a proper signature by the specified CA (or CA in the path)
and the cert's hostname must match the server's hostname.
If the cert isn't signed or a hostname is wrong - the
connection is aborted.
* if MARIADB_OPT_TLS_PEER_FP was used and the fingerprint matches,
the connection is allowed, if it doesn't match - aborted.
* If the connection uses unix socket or named pipes - it's allowed.
(consistent with server's --require-secure-transport behavior)
otherwise the cert is still in doubt, we don't know if we can trust
it or there's an active MitM in progress.
* If the user has provided no password or the server requested an
authentication plugin that sends the password in cleartext -
the connection is aborted.
* Perform the authentication. If the server accepts the password,
it'll send SHA2(scramble || password hash || cert fingerprint)
with the OK packet.
* Verify the SHA2 digest, if it matches - the connection is allowed,
otherwise it's aborted.
it's for client auth plugins only, server auth plugin should never
return it, because they cannot send a correct OK packet.
(OK packet is quite complex and carries a lot of information that
only the server knows)
rpl_semi_sync_slave_enabled_consistent.test and the first part of
the commit message comes from Brandon Nesterenko.
A test to show how to induce the "Read semi-sync reply magic number
error" message on a primary. In short, if semi-sync is turned on
during the hand-shake process between a primary and replica, but
later a user negates the rpl_semi_sync_slave_enabled variable while
the replica's IO thread is running; if the io thread exits, the
replica can skip a necessary call to kill_connection() in
repl_semisync_slave.slave_stop() due to its reliance on a global
variable. Then, the replica will send a COM_QUIT packet to the
primary on an active semi-sync connection, causing the magic number
error.
The test in this patch exits the IO thread by forcing an error;
though note a call to STOP SLAVE could also do this, but it ends up
needing more synchronization. That is, the STOP SLAVE command also
tries to kill the VIO of the replica, which makes a race with the IO
thread to try and send the COM_QUIT before this happens (which would
need more debug_sync to get around). See THD::awake_no_mutex for
details as to the killing of the replica’s vio.
Notes:
- The MariaDB documentation does not make it clear that when one
enables semi-sync replication it does not matter if one enables
it first in the master or slave. Any order works.
Changes done:
- The rpl_semi_sync_slave_enabled variable is now a default value for
when semisync is started. The variable does not anymore affect
semisync if it is already running. This fixes the original reported
bug. Internally we now use repl_semisync_slave.get_slave_enabled()
instead of rpl_semi_sync_slave_enabled. To check if semisync is
active on should check the @@rpl_semi_sync_slave_status variable (as
before).
- The semisync protocol conflicts in the way that the original
MySQL/MariaDB client-server protocol was designed (client-server
send and reply packets are strictly ordered and includes a packet
number to allow one to check if a packet is lost). When using
semi-sync the master and slave can send packets at 'any time', so
packet numbering does not work. The 'solution' has been that each
communication starts with packet number 1, but in some cases there
is still a chance that the packet number check can fail. Fixed by
adding a flag (pkt_nr_can_be_reset) in the NET struct that one can
use to signal that packet number checking should not be done. This
is flag is set when semi-sync is used.
- Added Master_info::semi_sync_reply_enabled to allow one to configure
some slaves with semisync and other other slaves without semisync.
Removed global variable semi_sync_need_reply that would not work
with multi-master.
- Repl_semi_sync_master::report_reply_packet() can now recognize
the COM_QUIT packet from semisync slave and not give a
"Read semi-sync reply magic number error" error for this case.
The slave will be removed from the Ack listener.
- On Windows, don't stop semisync Ack listener just because one
slave connection is using socket_id > FD_SETSIZE.
- Removed busy loop in Ack_receiver::run() by using
"Self-pipe trick" to signal new slave and stop Ack_receiver.
- Changed some Repl_semi_sync_slave functions that always returns 0
from int to void.
- Added Repl_semi_sync_slave::slave_reconnect().
- Removed dummy_function Repl_semi_sync_slave::reset_slave().
- Removed some duplicate semisync notes from the error log.
- Add test of "if (get_slave_enabled() && semi_sync_need_reply)"
before calling Repl_semi_sync_slave::slave_reply().
(Speeds up the code as we can skip all initializations).
- If epl_semisync_slave.slave_reply() fails, we disable semisync
for that connection.
- We do not call semisync.switch_off() if there are no active slaves.
Instead we check in Repl_semi_sync_master::commit_trx() if there are
no active threads. This simplices the code.
- Changed assert() to DBUG_ASSERT() to ensure that the DBUG log is
flushed in case of asserts.
- Removed the internal rpl_semi_sync_slave_status as it is not needed
anymore. The @@rpl_semi_sync_slave_status status variable is now
mapped to rpl_semi_sync_enabled.
- Removed rpl_semi_sync_slave_enabled as it is not needed anymore.
Repl_semi_sync_slave::get_slave_enabled() contains the active status.
- Added checking that we do not add a slave twice with
Ack_receiver::add_slave(). This could happen with old code.
- Removed Repl_semi_sync_master::check_and_switch() as it is not
needed anymore.
- Ensure that when we call Ack_receiver::remove_slave() that the slave
is removed from the listener before function returns.
- Call listener.listen_on_sockets() outside of mutex for better
performance and less contested mutex.
- Ensure that listening is ignoring newly added slaves when checking for
responses.
- Fixed the master ack_receiver listener is not killed if there are no
connected slaves (and thus stop semisync handling of future
connections). This could happen if all slaves sockets where would be
marked as unreliable.
- Added unlink() to base_ilist_iterator and remove() to
I_List_iterator. This enables us to remove 'dead' slaves in
Ack_recever::run().
- kill_zombie_dump_threads() now does killing of dump threads properly.
- It can now kill several threads (should be impossible but could
happen if IO slaves reconnects very fast).
- We now wait until the dump thread is done before starting the
dump.
- Added an error if kill_zombie_dump_threads() fails.
- Set thd->variables.server_id before calling
kill_zombie_dump_threads(). This simplies the code.
- Added a lot of comments both in code and tests.
- Removed DBUG_EVALUATE_IF "failed_slave_start" as it is not used.
Test changes:
- rpl.rpl_session_var2 added which runs rpl.rpl_session_var test with
semisync enabled.
- Some timings changed slight with startup of slave which caused
rpl_binlog_dump_slave_gtid_state_info.text to fail as it checked the
error log file before the slave had started properly. Fixed by
adding wait_for_pattern_in_file.inc that allows waiting for the
pattern to appear in the log file.
- Tests have been updated so that we first set
rpl_semi_sync_master_enabled on the master and then set
rpl_semi_sync_slave_enabled on the slaves (this is according to how
the MariaDB documentation document how to setup semi-sync).
- Error text "Master server does not have semi-sync enabled" has been
replaced with "Master server does not support semi-sync" for the
case when the master supports semi-sync but semi-sync is not
enabled.
Other things:
- Some trivial cleanups in Repl_semi_sync_master::update_sync_header().
- We should in 11.3 changed the default value for
rpl-semi-sync-master-wait-no-slave from TRUE to FALSE as the TRUE
does not make much sense as default. The main difference with using
FALSE is that we do not wait for semisync Ack if there are no slave
threads. In the case of TRUE we wait once, which did not bring any
notable benefits except slower startup of master configured for
using semisync.
Co-author: Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This solves the problem reported in MDEV-32960 where a new
slave may not be registered in time and the master disables
semi sync because of that.
BASE 62 uses 0-9, A-Z and then a-z to give the numbers 0-61. This patch
increases the range of the string functions to cover this.
Based on ideas and tests in PR #2589, but re-written into the charset
functions.
Includes fix by Sergei, UBSAN complained:
ctype-simple.c:683:38: runtime error: negation of -9223372036854775808
cannot be represented in type 'long long int'; cast to an unsigned
type to negate this value to itself
Co-authored-by: Weijun Huang <huangweijun1001@gmail.com>
Co-authored-by: Sergei Golubchik <serg@mariadb.org>
Since 0930eb86cb, system table creation
needed for spider init is delayed to the signal_ddl_recovery_done
callback. Since it is part of the init, failure should result in
spider deinit.
We also remove the call to spider_init_system_tables() from
spider_db_init(), as it was removed in the commit mentioned above and
accidentally restored in a merge.
This commit fixes GTID inconsistency which was injected by mariabackup SST.
Donor node now writes new info file: donor_galera_info, which is streamed
along the mariabackup donation to the joiner node. The donor_galera_info
file contains both GTID and gtid domain_id, and joiner will use these to
initialize the GTID state.
Commit has new mtr test case: galera_3nodes.galera_gtid_consistency, which
exercises potentially harmful mariabackup SST scenarios. The test has also
scenario with IST joining.
Signed-off-by: Julius Goryavsky <julius.goryavsky@mariadb.com>
The leaks are all 40 bytes and happens in this call stack when running
mtr vcol.vcol_syntax:
alloc_root()
...
Virtual_column_info::fix_and_check_exp()
...
Delayed_insert::get_local_table()
The problem was that one copied a MEM_ROOT from THD to a TABLE without
taking into account that new blocks would be allocated through the
TABLE memroot (and would thus be leaked).
In general, one should NEVER copy MEM_ROOT from one object to another
without clearing the copied memroot!
Fixed by, at end of get_local_table(), copy all new allocated objects
to client_thd->mem_root.
Other things:
- Removed references to MEM_ROOT::total_alloc that was wrongly left
after a previous commit
move MYSQL::fields down, replacing MYSQL::unused5
this way only MYSQL::fields and MYSQL::field_alloc will still have
different offset in C/C and the server, but all other MYSQL members
will get back in sync.
luckily, plugins shouldn't need MYSQL::fields or MYSQL::field_alloc
added a check to ensure both MYSQL structures are always of
the same size.
Systemd socket activation cannot handle a shutdown on the file
descriptor[1].
Enumerate past the socket activation descriptors.
If there was no shutdown to trigger the breaking of the event loop,
then write to the termination_event_fd that was setup during
the socket activation code for this purpose.
As abort_loop= true is already set at the top of break_connect_loop,
and this is checked in loop before sockets are processed, no
additional checking to read from the termination_event_fd is needed.
Without socket activation defined, or used, termination_event_fd keeps
its -1 default value.
Close the eventfd outside the while loop so retries can happen if
the write fails for some reason.
ref[1]: https://www.freedesktop.org/software/systemd/man/latest/sd_listen_fds.html
Reviewed by: Vladislav Vaintroub
Remove alarm() remnants
- Replace thread-unsafe use of alarm() inside my_lock.c with a
timed loop.
- Remove configure time checks
- Remove mysys my_alarm.c/my_alarm.h
This allows to simplify net_real_read() and net_real_write() a bit.
Removed some superfluous #ifdef/ifndef MYSQL_SERVER from net_serv.cc
The code always runs in server, either normal or embedded.
Dead code for switching socket between blocking and non-blocking modes,
is also removed.
Removed pthread_kill() with alarm signal that woke up main thread on
server shutdown. Used shutdown(2) on polling sockets instead, to the same
effect.
Removed yet another superstitious pthread_kill(), that ran on non-Windows
in terminate_slave_thread().
Use ICU to work with timezones, to retrieve current timezone name,
abbreviation, and offset from GMT. However in case TZ environment variable
is used to set timezone, and ICU does not have corresponding one,
C runtime functions will be used.
Moved some of timezone handling to mysys.
Added unit tests.
To allow cmake -DWITH_ASAN=ON to work out of the box when using
newer compilers, we must increase the default thread stack size.
By design, AddressSanitizer will allocate some "sentinel" areas in
stack frames so that it can better catch buffer overflows, by trapping
access to memory addresses that reside between stack-allocated variables.
Apparently, some parameters related to this have been changed
recently, possibly to allow -fsanitize=address to catch more errors.
