Bug #48370 Absolutely wrong calculations with GROUP BY and
decimal fields when using IF
Added the test cases in the above two bugs for regression
testing.
Added additional tests that demonstrate a incomplete fix.
Added a new factory method for Field_new_decimal to
create a field from an (decimal returning) Item.
In the new method made sure that all the precision and
length variables are capped in a proper way.
This is required because Item's can have larger precision
than the decimal fields and thus need to be capped when
creating a field based on an Item type.
Fixed the wrong typecast to Item_decimal.
When merging ranges during calculation of the result of OR
to two range sets the current range may be obsoleted by the
resulting merged range.
The first overlapping range can be obsoleted as well.
Fixed by moving the pointer to the first overlapping range to the
pointer of the resulting union range.
Added few comments at key places in key_or().
Fixed a problem with the test case when executed with ps-protocol.
There the conflicing lock would be noticed during prepare, not
during execution of the insert - leading to a different (but
equally appropriate) error message.
DELETE IGNORE
The ER_CANT_UPDATE_USED_TABLE_IN_SF_OR_TRG error was set in the
diagnostics area when it happened, but the DELETE cleanup code
never checked for a non-fatal error condition, thus trying to
set diag.area to "ok". This triggered an assert checking that
the diag.area was empty.
The fix was to test if there existed a non-fatal error condition
(thd->is_error() before ok'ing the operation.
The problem was a "self-deadlock" if the connection issuing INSERT DELAYED
had both the global read lock (FLUSH TABLES WITH READ LOCK) and LOCK TABLES
mode active. The table being inserted into had to be different from the
table(s) locked by LOCK TABLES.
For INSERT DELAYED, the connection thread waits until the handler thread has
opened and locked its table before returning. But since the global read lock
was active, the handler thread would be unable to lock and would wait for the
global read lock to go away.
So the handler thread would be waiting for the connection thread to release
the global read lock while the connection thread was waiting for the handler
thread to lock the table. This gave a "self-deadlock" (same connection,
different threads).
The deadlock would only happen if we also had LOCK TABLES mode since the
INSERT otherwise will try to get protection against global read lock before
starting the handler thread. It will then notice that the global read lock
is owned by the same connection and report ER_CANT_UPDATE_WITH_READLOCK.
This patch removes the deadlock by reporting ER_CANT_UPDATE_WITH_READLOCK
also if we are inside LOCK TABLES mode.
Test case added to delayed.test.
WHERE conditions
check_group_min_max() checks if the loose index scan
optimization is applicable for a given WHERE condition, that is
if the MIN/MAX attribute participates only in range predicates
comparing the corresponding field with constants.
The problem was that it considered the whole predicate suitable
for the loose index scan optimization as soon as it encountered
a constant as a predicate argument. This is obviously wrong for
cases when a constant is the first argument of a predicate
which does not satisfy the above condition.
Fixed check_group_min_max() so that all arguments of the input
predicate are considered to decide if it passes the test, even
though a constant has already been encountered.
MySQL manual describes values of the YEAR(2) field type as follows:
values 00 - 69 mean 2000 - 2069 years and values 70 - 99 mean 1970 - 1999
years. MIN/MAX and comparison functions was comparing them as int values
thus producing wrong result.
Now the Arg_comparator class is extended with compare_year function which
performs correct comparison of the YEAR type.
The Item_sum_hybrid class now uses Item_cache and Arg_comparator objects to
correctly calculate its value.
To allow Arg_comparator to use func_name() function for Item_func and Item_sum
objects the func_name declaration is moved to the Item_result_field class.
A helper function is_owner_equal_func is added to the Arg_comparator class.
It checks whether the Arg_comparator object owner is the <=> function or not.
A helper function setup is added to the Item_sum_hybrid class. It sets up
cache item and comparator.
init_read_record() - (records.cc:274)
Item_cond::used_tables_cache was accessed in
records.cc#init_read_record() without being initialized. It had
not been initialized because it was wrongly assumed that the
Item's variables would not be accessed, and hence
quick_fix_field() was used instead of fix_fields() to save a few
CPU cycles at creation time.
The fix is to properly initilize the Item by replacing
quick_fix_field() with fix_fields().
This patch borrows ideas, text and code from Kristofer
Pettersson's patch.
An assignment of a system variable sharing the same base
name as a declared stored procedure variable in the same
context could lead to a crash.
The reason was that during the parsing of the syntactic
rule 'option_value' an uninitialized set_var object was
pushed to the parameter stack of the SET statement. The
parent rule 'option_type_value' interpreted the existence
of variables on the parameter stack as an assignment and
wrapped it in a sp_instr_set object.
As the procedure later was executed an attempt was made
to run the method 'check()' on an uninitialized member
object (NULL value) belonging to the previously created
but uninitialized object.
This patch refactors the 'internal_variable_name' rule and
copies the semantic analysis part to the depending parent
rule: 'option_value'. This makes it possible to account
for any prefixes affecting the interpretation of the
internal_variable_name.
Until-pos guarding did not distiguish the master originated events from ones that the slave
can introduce to the relay log e.g Rotate to the next relay log at slave restarting.
The local Rotate's coordinate are incomparable with the Until-master-pos.
That led to the unexpectable stop this bug describes.
Fixed with to avoid Until-master-pos comparison for a local slave's event.
Notice that if --replicate-same-server is true such event is treated as coming from
the master side.
deadlock was encountered
The bug is caused by an inconsistent handling of the IGNORE
clause. A read from a const table caused a lock timeout
(ER_LOCK_TIMEOUT) in innodb. Since the IGNORE clause was
given, the timeout was converted into a warning instead of
an error, thus not populating the diagnostics area. When
innodb subsequently marked the transaction for rollback,
mysql asserted since the diag.area was empty.
This patch consists of only a test case, as the bug itself
was fixed by the patch for Bug #46539
on any access
Archive engine for 5.1 (and latter) version uses a modified
version of zlib (azlib). These two version are incompatible
so a proper upgrade is needed before tables created in 5.0
can be used reliable.
This upgrade can be performed using repair. But due to lack
of test its risky to allow upgrade for now. This patch addresses
only the crashing issue. Any attempt to repair will be blocked.
Eventually repair can be allowed to run through (which will also
cause an upgrade from older version to newer) but only after a
thorough testing.
The additional patch. That 'loadxml.test' failure was actually about our testing system,
not the code.
Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
can be evaluated, then started in a parallel thread. We only have separane 'send' and
'eval' commands at the moment.
Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
before the test goes further. The present 'reap' command doesn't handle the killed threads
well.
per-file comments:
client/mysqltest.cc
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
The 'send_eval' command implemented.
mysql-test/r/loadxml.result
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test result updated.
mysql-test/t/loadxml.test
Bug#42520 killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
test case added.
------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
Bug#27249 table_wild with alias: select t1.* as something
Aliases to table wildcards are silently ignored, but they should
not be allowed as it is non-standard and currently useless. There
is not point in having a alias to a wildcard of column names.
The solution is to rewrite the select_item rule so that aliases
for table wildcards are not accepted.
Contribution by Martin Friebe
------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
Bug#15192 "fatal errors" are caught by handlers in stored procedures
The problem is that fatal errors (e.g.: out of memory) were being
caught by stored procedure exception handlers which could cause
the execution to not be stopped due to a continue handler.
The solution is to not call any exception handler if the error is
fatal and send the fatal error to the client.
------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
Bug#41860: Without Windows named pipe
The problem was that the patch for Bug#10374 broke named pipe
and shared memory transports on Windows due to a failure to
implement a dummy poll method for transports other than BSD
sockets. Another problem was that mysqltest lacked support
for named pipe and shared memory connections, which lead to
misleading test cases that were supposed run common queries
over both transports.
The solution is to properly implement, at the VIO layer, the
poll and is_connected methods. The is_connected method is
implemented for every suppported transport and the poll one
only where it makes sense. Furthermore, support for named pipe
and shared memory connections is added to mysqltest as to
enable testing of both transports using the test suite.
------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted
The problem is that the server doesn't detect aborted connections which
are waiting on a lock or sleeping (user sleep), wasting system resources
for a connection that is already dead.
The solution is to peek at the connection every five seconds to verify if
the connection is not aborted. A aborted connection is detect by polling
the connection socket for available data to be read or end of file and in
case of eof, the wait is aborted and the connection killed.
------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
Bug#27525 table not found when using multi-table-deletes with aliases over several databas
Bug#30234 Unexpected behavior using DELETE with AS and USING
The multi-delete statement has a documented limitation that
cross-database multiple-table deletes using aliases are not
supported because it fails to find the tables by alias if it
belongs to a different database. The problem is that when
building the list of tables to delete from, if a database
name is not specified (maybe an alias) it defaults to the
name of the current selected database, making impossible to
to properly resolve tables by alias later. Another problem
is a inconsistency of the multiple table delete syntax that
permits ambiguities in a delete statement (aliases that refer
to multiple different tables or vice-versa).
The first step for a solution and proper implementation of
the cross-databse multiple table delete is to get rid of any
ambiguities in a multiple table statement. Currently, the parser
is accepting multiple table delete statements that have no obvious
meaning, such as:
DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;
The solution is to resolve the left part of a delete statement
using the right part, if the a table on right has an alias,
it must be referenced in the left using the given alias. Also,
each table on the left side must match unambiguously only one
table in the right side.
------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
Bug#36649: Condition area is not properly cleaned up after stored routine invocation
The problem is that the diagnostics area of a trigger is not
isolated from the area of the statement that caused the trigger
invocation. In MySQL terms, it means that warnings generated
during the execution of the trigger are not removed from the
"warning area" at the end of the execution.
Before this fix, the rules for MySQL message list life cycle (see
manual entry for SHOW WARNINGS) did not apply to statements
inside stored programs:
- The manual says that the list of messages is cleared by a
statement that uses a table (any table). However, such
statement, if run inside a stored program did not clear the
message list.
- The manual says that the list is cleared by a statement that
generates a new error or a warning, but this was not the case
with stored program statements either and is changed to be the
case as well.
In other words, after this fix, a statement has the same effect
on the message list regardless of whether it's executed inside a
stored program/sub-statement or not.
This introduces an incompatible change:
- before this fix, a, e.g. statement inside a trigger could
never clear the global warning list
- after this fix, a trigger that generates a warning or uses a
table, clears the global warning list
- however, when we leave a trigger or a function, the caller's
warning information is restored (see more on this below).
This change is not backward compatible as it is intended to make
MySQL behavior similar to the SQL standard behavior:
A stored function or trigger will get its own "warning area" (or,
in standard terminology, diagnostics area). At the beginning of
the stored function or trigger, all messages from the caller area
will be copied to the area of the trigger. During execution, the
message list will be cleared according to the MySQL rules
described on the manual (SHOW WARNINGS entry). At the end of the
function/trigger, the "warning area" will be destroyed along with
all warnings it contains, except that if the last statement of
the function/trigger generated messages, these are copied into
the "warning area" of the caller.
Consequently, statements that use a table or generate a warning
*will* clear warnings inside the trigger, but that will have no
effect to the warning list of the calling (outer) statement.
------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
Bug #47304 Test main.mdl_sync fails on embedded server
The problem was that SHOW PROCESSLIST was trying to access
a thread that was not properly running and therefore had an
uninitialized mutex.
This patch explicitly resets thd->mysys_var after each embedded
server command to prevent the mutex from being accessed in an
illegal state.
The patch also re-enables lock_multi.test and mdl_sync.test for
embedded server as they had been disabled because of this bug.
mysql-next-mr-bugfixing.
Bug no 32858 was fixed in two different ways in what was
then called mysql 5.1 and 6.0. The fix in 6.0 was very
different since bugfix no 33204 was present. Furthermore,
the two fixes were not compatible. Hence in order to
backport Bug#33204 to the 5.1-based mysql-next-mr-bugfixing,
it was necessary to remove the 5.1 fix of 32858 and apply
the 6.0 version of the fix.
memory
The server was doing a bad class typecast causing setting of
wrong value for the maximum number of items in an internal
structure used in equality propagation.
Fixed by not doing the wrong typecast and asserting the type
of the Item where it should be done.
values
We should re-set the access method functions when changing the access
method when switching to another index to avoid sorting.
Fixed by doing a little re-engineering : encapsulating all the function
assignment into a special function and calling it when flipping the
indexes.
# Bug#24690 Stored functions: RETURNing UTF8 strings
# do not return UTF8_UNICODE_CI collation
#
# Bug#17903: cast to char results in binary
# Regression. The character set was not being properly initialized
# for CAST() with a type like CHAR(2) BINARY, which resulted in
# incorrect results or even a server crash.
#
Backporting from mysql-6.0-codebase.
mysql-test/r/sp-ucs2.result:
mysql-test/t/sp-ucs2.test:
Adding tests
sql/mysql_priv.h:
Adding prototype
sql/sp.cc
Remember COLLATE clause for non-default collations
sql/sql_parse.cc
Adding a new helper function
sql/sql_yacc.yy
- Allow "CHARACTER SET cs COLLATE cl" in
SP parameters, RETURNS, DECLARE
- Minor reorganization for "ASCII" and "UNICODE"
related rules, to make the code more readable,
also to allow these aliases:
* "VARCHAR(10) ASCII BINARY" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) BINARY ASCII" -> CHARACTER SET latin1 COLLATE latin1_bin
* "VARCHAR(10) UNICODE BINARY" -> CHARACTER SET ucs2 COLLATE ucs2_bin
* "VARCHAR(10) BINARY UNICODE" -> CHARACTER SET ucs2 COLLATE ucs2_bin
Previously these four aliases returned the error
"This version of MySQL does not yet support return value collation".
Note:
This patch allows "VARCHAR(10) CHARACTER SET cs COLLATE cl"
and the above four aliases.
"VARCHAR(10) COLLATE cl" is still not allowed
i.e. when COLLATE is given without CHARACTER SET.
If we want to support this, we need an architecture decision
which character set to use by default.
