Problem: add_collation did not check that cs->number is smaller
than the number of elements in the array all_charsets[],
so server could crash when loading an Index.xml file with
a collation ID greater the number of elements
(for example when downgrading from 5.5).
Fix: adding a condition to check that cs->number is not out of valid range.
on any access
Archive engine for 5.1 (and latter) version uses a modified
version of zlib (azlib). These two version are incompatible
so a proper upgrade is needed before tables created in 5.0
can be used reliable.
This upgrade can be performed using repair. But due to lack
of test its risky to allow upgrade for now. This patch addresses
only the crashing issue. Any attempt to repair will be blocked.
Eventually repair can be allowed to run through (which will also
cause an upgrade from older version to newer) but only after a
thorough testing.
In MySQL when the mapping for space is changed to something other than
0x20 by defining a different collation, then space is not ignored when
comparing two strings.
This was happening because the function that performs the comparison
of two strings while ignoring ending spaces, was comparing the collation
value of a space with the ascii value of the ' ' character. This should
be changed to do comparison between the collated values.
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
The 'BEGIN/COMMIT/ROLLBACK' log event could be filtered out if the
database is not selected by --database option of mysqlbinlog command.
This can result in problem if there are some statements in the
transaction are not filtered out.
To fix the problem, mysqlbinlog will output 'BEGIN/ROLLBACK/COMMIT'
in regardless of the database filtering rules.
Replication SQL thread does not set database default charset to
thd->variables.collation_database properly, when executing LOAD DATA binlog.
This bug can be repeated by using "LOAD DATA" command in STATEMENT mode.
This patch adds code to find the default character set of the current database
then assign it to thd->db_charset when slave server begins to execute a relay log.
The test of this bug is added into rpl_loaddata_charset.test
mysqld
The problem was that enabling the event scheduler inside a init
file caused the server to crash upon start-up. The crash occurred
because the event scheduler wasn't being initialized before the
commands in the init-file are processed.
The solution is to initialize the event scheduler before the init
file is read. The patch also disables the event scheduler during
bootstrap and makes the bootstrap operation robust in the
presence of background threads.
This patch adds corrections to the original patch
submitted 2009-04-08 (http://lists.mysql.com/commits/71607):
- fixed that the original patch didn't work because of an
incorrect condition;
- added a test case.
Any statement reading corrupt archive data file
(CHECK/REPAIR/SELECT/UPDATE/DELETE) may cause assertion
failure in debug builds. This assertion has been removed
and an error is returned instead.
Also fixed that CHECK/REPAIR returns vague error message
when it mets corruption in archive data file. This is
fixed by returning proper error code.
conflicts:
Text conflict in client/mysqltest.cc
Text conflict in mysql-test/include/wait_until_connected_again.inc
Text conflict in mysql-test/lib/mtr_report.pm
Text conflict in mysql-test/mysql-test-run.pl
Text conflict in mysql-test/r/events_bugs.result
Text conflict in mysql-test/r/log_state.result
Text conflict in mysql-test/r/myisam_data_pointer_size_func.result
Text conflict in mysql-test/r/mysqlcheck.result
Text conflict in mysql-test/r/query_cache.result
Text conflict in mysql-test/r/status.result
Text conflict in mysql-test/suite/binlog/r/binlog_index.result
Text conflict in mysql-test/suite/binlog/r/binlog_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_packet.result
Text conflict in mysql-test/suite/rpl/t/rpl_packet.test
Text conflict in mysql-test/t/disabled.def
Text conflict in mysql-test/t/events_bugs.test
Text conflict in mysql-test/t/log_state.test
Text conflict in mysql-test/t/myisam_data_pointer_size_func.test
Text conflict in mysql-test/t/mysqlcheck.test
Text conflict in mysql-test/t/query_cache.test
Text conflict in mysql-test/t/rpl_init_slave_func.test
Text conflict in mysql-test/t/status.test
Problem was that it tried to run partitioning function calls when
opening a partitioned table, when it was explicitly disabled.
Solution is to check if the partitioning plugin is ready to use before
using any partitioning specific calls.
Problem: When an Incident_log_event contains a bad incident number on disk,
the server crashes with an assertion.
Fix: Don't validate input with assertions. Use errors.
Updated MySQL time handling code to react correctly on UTC leap second additions.
MySQL functions that return the OS current time, like e.g. CURDATE(), NOW() etc
will return :59:59 instead of :59:60 or 59:61.
As a result the reader will receive :59:59 for 2 or 3 consecutive seconds
during the leap second.
This fix will not affect the values returned by UNIX_TIMESTAMP() for leap seconds.
But note that when converting the value returned by UNIX_TIMESTAMP() to broken
down time the correction of leap seconds will still be applied.
Note that this fix will make a difference *only* if the OS is specially configured
to return leap seconds from the OS time calls or when using a MySQL time zone
defintion that has leap seconds.
Even after this change date/time literals (or other broken down time
representations) with leap seconds (ending on :59:60 or 59:61) will still be
considered illegal and discarded by the server with an error or
a warning depending on the sql mode.
Added a test case to demonstrate the effect of the fix.
Problem was that auto_repair, is_crashed and check_and_repair was not
implemented in ha_partition.
Solution, implemented them as loop over all partitions for is_crashed and
check_and_repair, and using the first partition for auto_repair.
(Recommit after fixing review comments)
Problem 1: main.loaddata tried to trigger an error caused by
reading files outside the vardir, by reading itself. However,
if loaddata.test is not world-readable (e.g., umask=0077),
then another error is triggered.
Fix 1: allow the other error too.
Problem 2: rpl_slave_skip and rpl_innodb_mixed_dml tried to
copy a file from mysql-test/suite/rpl/data to mysql-test/var
and then read it. That failed too if umask=0077, since the
file would not become world-readable.
Fix 2: move the files from mysql-test/suite/rpl/data to
mysql-test/std_data and update tests accordingly. Remove
the directory mysql-test/suite/rpl/data.
The REPAIR TABLE ... USE_FRM query silently corrupts data of tables
with old .FRM file version.
The mysql_upgrade client program or the REPAIR TABLE query (without
the USE_FRM clause) can't prevent this trouble, because in the
common case they don't upgrade .FRM file to compatible structure.
1. Evaluation of the REPAIR TABLE ... USE_FRM query has been
modified to reject such tables with the message:
"Failed repairing incompatible .FRM file".
2. REPAIR TABLE query (without USE_FRM clause) evaluation has been
modified to upgrade .FRM files to current version.
3. CHECK TABLE ... FOR UPGRADE query evaluation has been modified
to return error status when .FRM file has incompatible version.
4. mysql_upgrade and mysqlcheck client programs call CHECK TABLE
FOR UPGRADE and REPAIR TABLE queries, so their behaviors have
been changed too to upgrade .FRM files with incompatible
version numbers.
ChangeSet@1.2583, 2008-03-31
Merge five.local.lan:/work/merge/mysql-5.0-Bug
into five.local.lan:/work/merge/mysql-5.1-Bug
Addditional manual fixes will be needed.
MERGE: 1.1810.3667.16
Which contains
ChangeSet@1.1810.3667.16, 2008-03-31
Fix for Bug
#35335 funcs_1: Some tests fail within load_file during
pushbuild runs
...
Bug#35335 funcs_1: Some tests fail within load_file during
pushbuild runs
Solution: 1. Move files with input data used in load_file,
load data etc.
from suite/funcs_1/<whatever>
to std_data
2. Use for testsuite funcs_1 the server option
--secure-file-priv=<MYSQLTEST_VARDIR>
3. Outfiles have to be stored under MYSQLTEST_VARDIR
+ changes according to WL#4304 Cleanup in funcs_1 tests
- backport of fixes/improvements made in 5.1 to 5.0
The differences between scripts in 5.0 and 5.1 cause
much additional and annoying work during any upmerge.
- replace error numbers with names
- improved comments
- improved formatting
- Unify storage engine names so that result files for
storage engine variants do not differ (some tests)
- remove a script no more used (tests are done in other scripts)
