port from mysql-next (5.4?) to mysql-next-mr-bugfixes (5.5/5.6?)
3477 Mikael Ronstrom 2009-07-29
Bug#32115, made use of local lex object to avoid side effects of opening partitioned
tables
3478 Mikael Ronstrom 2009-07-29
Bug#32115, added an extra test in debug builds to ensure no dangling pointers to the
old lex object is still around
3479 Mikael Ronstrom 2009-07-29
Bug#32115, Removed an assert that was no longer needed
3480 Mikael Ronstrom 2009-08-05
Bug#32115, fixed review comments
3481 Mikael Ronstrom 2009-08-07
Bug#32115, remove now obsolete lex_start calls
------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
Bug #47304 Test main.mdl_sync fails on embedded server
The problem was that SHOW PROCESSLIST was trying to access
a thread that was not properly running and therefore had an
uninitialized mutex.
This patch explicitly resets thd->mysys_var after each embedded
server command to prevent the mutex from being accessed in an
illegal state.
The patch also re-enables lock_multi.test and mdl_sync.test for
embedded server as they had been disabled because of this bug.
Conflicts
=========
Text conflict in .bzr-mysql/default.conf
Text conflict in libmysqld/CMakeLists.txt
Text conflict in libmysqld/Makefile.am
Text conflict in mysql-test/collections/default.experimental
Text conflict in mysql-test/extra/rpl_tests/rpl_row_sp006.test
Text conflict in mysql-test/suite/binlog/r/binlog_tmp_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata.result
Text conflict in mysql-test/suite/rpl/r/rpl_loaddata_fatal.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_create_table.result
Text conflict in mysql-test/suite/rpl/r/rpl_row_sp006_InnoDB.result
Text conflict in mysql-test/suite/rpl/r/rpl_stm_log.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result
Text conflict in mysql-test/suite/rpl_ndb/r/rpl_ndb_sp006.result
Text conflict in mysql-test/t/mysqlbinlog.test
Text conflict in sql/CMakeLists.txt
Text conflict in sql/Makefile.am
Text conflict in sql/log_event_old.cc
Text conflict in sql/rpl_rli.cc
Text conflict in sql/slave.cc
Text conflict in sql/sql_binlog.cc
Text conflict in sql/sql_lex.h
21 conflicts encountered.
NOTE
====
mysql-5.1-rpl-merge has been made a mirror of mysql-next-mr:
- "mysql-5.1-rpl-merge$ bzr pull ../mysql-next-mr"
This is the first cset (merge/...) committed after pulling
from mysql-next-mr.
2630.39.1, 2630.28.29, 2630.34.3, 2630.34.2, 2630.34.1, 2630.29.29,
2630.29.28, 2630.31.1, 2630.28.13, 2630.28.10, 2617.23.14 and
some other minor revisions.
This patch implements:
WL#4264 "Backup: Stabilize Service Interface" -- all the
server prerequisites except si_objects.{h,cc} themselves (they can
be just copied over, when needed).
WL#4435: Support OUT-parameters in prepared statements.
(and all issues in the initial patches for these two
tasks, that were discovered in pushbuild and during testing).
Bug#39519: mysql_stmt_close() should flush all data
associated with the statement.
After execution of a prepared statement, send OUT parameters of the invoked
stored procedure, if any, to the client.
When using the binary protocol, send the parameters in an additional result
set over the wire. When using the text protocol, assign out parameters to
the user variables from the CALL(@var1, @var2, ...) specification.
The following refactoring has been made:
- Protocol::send_fields() was renamed to Protocol::send_result_set_metadata();
- A new Protocol::send_result_set_row() was introduced to incapsulate
common functionality for sending row data.
- Signature of Protocol::prepare_for_send() was changed: this operation
does not need a list of items, the number of items is fully sufficient.
The following backward incompatible changes have been made:
- CLIENT_MULTI_RESULTS is now enabled by default in the client;
- CLIENT_PS_MULTI_RESUTLS is now enabled by default in the client.
"have_profiling"
1) Renamed have_community_features server system variable to
have_profiling.
2) Removed eable-community-features configure option and
ENABLE_COMMUNITY_FEATURES macro.
3) Removed COMMUNITY_SERVER macro and replaced its usage by
ENABLED_PROFILING.
Only --enable-profiling is now needed to enable profiling.
It was the only existing "community feature", so there was
no need for both configure options.
Using --enable-community-features will give a warning message
since it no longer exists.
given an already connected MYSQL handle
mysql_real_connect() did not check whether the MYSQL connection
handler was already connected and connected again even if so.
Now a CR_ALREADY_CONNECTED error is returned.
- Read plug.in to fid the name of the engine to link with, does not have
to be same as engine dir
- Use engine dir when figuring out which libraries to build limbysqld with
http://lists.mysql.com/commits/59686
Cleanup pthread_self(), pthread_create(), pthread_join() implementation on Windows.
Prior implementation is was unnecessarily complicated and even differs in embedded
and non-embedded case.
Improvements in this patch:
* pthread_t is now the unique thread ID, instead of HANDLE returned by beginthread
This simplifies pthread_self() to be just straight GetCurrentThreadId().
prior it was much art involved in passing the beginthread() handle from the caller
to the TLS structure in the child thread ( did not work for the main thread of
course)
* remove MySQL specific my_thread_init()/my_thread_end() from pthread_create.
No automagic is done on Unix on pthread_create(). Having the same on Windows will
improve portability and avoid extra #ifdef's
* remove redefinition of getpid() - it was defined as GetCurrentThreadId()
2677 Vladislav Vaintroub 2008-11-04
CMakeLists.txt files cleanup
- remove SAFEMALLOC and SAFE_MUTEX definitions that were
present in *each* CMakeLists.txt. Instead, put them into top level
CMakeLists.txt, but disable on Windows, because
a) SAFEMALLOC does not add any functionality that is not already
present in Debug C runtime ( and 2 safe malloc one on top of the other
only unnecessarily slows down the server)
b)SAFE_MUTEX does not work on Windows and have been
explicitely disabled on Windows with #undef previously. Fortunately,
ntdll does pretty good job identifying l problems with
CRITICAL_SECTIONs.
DebugBreak()s on using uninited critical section, unlocking unowned
critical section)
-Also, remove occationally used -D_DEBUG (added by compiler
anyway)
We cann connect() in a non-blocking mode to be able to specify a
non-standard timeout.
The problem was that we did not fetch the status from the
non-blocking connect(). We assumed that poll() would not return
a POLLIN flag if the connect failed. But on some platforms this
is not true.
After a successful poll() we do now retrieve the status value
from connect() with getsockopt(...SO_ERROR...). Now we do know
if (and how) the connect failed.
The test case for my investigation was rpl.rlp_ssl1 on an
Ubuntu 9.04 x86_64 machine. Both, IPV4 and IPV6 were active.
'localhost' resolved first for IPV6 and then for IPV4. The
connection over IPV6 was blocked. rpl.rlp_ssl1 timed out
as it did not notice the failed connect(). The first read()
failed, which was interpreted as a master crash and the
connection was tried to reestablish with the same result
until the retry limit was reached.
With the fix, the connect() problem is immediately recognized,
and the connect() is retried on the second resolution for
'localhost', which is successful.
DECIMAL and TIMESTAMP used to have NUM_FLAG, but NEWDECIMAL was forgotten.
It's correct that TIMESTAMP does not have the flag nowadays (manual will be updated, connectors
developers will be notified).
This patch provides performance improvements:
- send_fields() when character_set_results = latin1
is now about twice faster for column/table/database
names, consisting on ASCII characters.
Changes:
- Protocol doesn't use "convert" temporary buffer anymore,
and converts strings directly to "packet".
- General conversion optimization: quick conversion
of ASCII strings was added.
modified files:
include/m_ctype.h
- Adding a new flag.
- Adding a new function prototype
libmysqld/lib_sql.cc
- Adding quick conversion method for embedded library:
conversion is now done directly to result buffer,
without using a temporary buffer.
mysys/charset.c
- Mark all dynamic ucs2 character sets as non-ASCII
- Mark some dymamic 7bit and 8bit charsets as non-ASCII
(for example swe7 is not fully ASCII compatible).
sql/protocol.cc
- Adding quick method to convert a string directly
into protocol buffer, without using a temporary buffer.
sql/protocol.h
- Adding a new method prototype
sql/sql_string.cc
Optimization for conversion between two ASCII-compatible charsets:
- quickly convert ASCII strings,
switch to mc_wc->wc_mb method only when a non-ASCII character is met.
- copy four ASCII characters at once on i386
strings/conf_to_src.c
- Marking non-ASCII character sets with a flag.
strings/ctype-extra.c
- Regenerating ctype-extra.c by running "conf_to_src".
strings/ctype-uca.c
- Marking UCS2 character set as non-ASCII.
strings/ctype-ucs2.c
- Marking UCS2 character set as non-ASCII.
strings/ctype.c
- A new function to detect if a 7bit or 8bit character set
is ascii compatible.
htttp://lists.mysql.com/commits/50957?f=plain
Always use TLS functions instead of __declspec(thread) to access
thread local storage variables.
The change removes the necessity to recomplile the same source
files twice - with USE_TLS for DLLs and without USE_TLS for EXEs.
Real benefit of this change is better readability and maintainability
of TLS functions within MySQL.
There is a performance loss using TlsXXX functions compared to __declspec
but the difference is negligible in practice. In a sysbench-like benchmark
I ran with with TlsGetValue, pthread_[get|set]_specific was called 600000000
times and took 0.17sec of total 35min CPU time, or 0.008%.
Backport from 6.0 to 5.1.
Only those sync points are included, which are used in debug_sync.test.
The Debug Sync Facility allows to place synchronization points
in the code:
open_tables(...)
DEBUG_SYNC(thd, "after_open_tables");
lock_tables(...)
When activated, a sync point can
- Send a signal and/or
- Wait for a signal
Nomenclature:
- signal: A value of a global variable that persists
until overwritten by a new signal. The global
variable can also be seen as a "signal post"
or "flag mast". Then the signal is what is
attached to the "signal post" or "flag mast".
- send a signal: Assign the value (the signal) to the global
variable ("set a flag") and broadcast a
global condition to wake those waiting for
a signal.
- wait for a signal: Loop over waiting for the global condition until
the global value matches the wait-for signal.
Please find more information in the top comment in debug_sync.cc
or in the worklog entry.
Restore a stub of the removed mysql_odbc_escape_string function
to fix a ABI breakage. The function was intended to be private
and used only by Connector/ODBC, but, unfortunately, it was exported
as part of the ABI. Nonetheless, only a stub is restored as the
original function is inherently broken and shouldn't be used.
This restoration only applies to MySQL 5.0. This will be addressed
differently in later versions -- reworked library versioning.
bzr branch mysql-5.1-performance-version mysql-trunk # Summit
cd mysql-trunk
bzr merge mysql-5.1-innodb_plugin # which is 5.1 + Innodb plugin
bzr rm innobase # remove the builtin
Next step: build, test fixes.
- Define and pass compile time path variables as pre-processor definitions to
mimic the makefile build.
- Set new CMake version and policy requirements explicitly.
- Changed DATADIR to MYSQL_DATADIR to avoid conflicting definition in
Platform SDK header ObjIdl.h which also defines DATADIR.