Addendum fixes after changing the condition variable
for the global read lock.
The stress test suite revealed some deadlocks. Some were
related to the new condition variable (COND_global_read_lock)
and some were general problems with the global read lock.
It is now necessary to signal COND_global_read_lock whenever
COND_refresh is signalled.
We need to wait for the release of a global read lock if one
is set before every operation that requires a write lock.
But we must not wait if we have locked tables by LOCK TABLES.
After setting a global read lock a thread waits until all
write locks are released.
schemas
The function check_one_table_access() called to check access to tables in
SELECT/INSERT/UPDATE was doing additional checks/modifications that don't hold
in the context of setup_tables_and_check_access().
That's why the check_one_table() was split into two : the functionality needed by
setup_tables_and_check_access() into check_single_table_access() and the rest of
the functionality stays in check_one_table_access() that is made to call the new
check_single_table_access() function.
The check for view security was lacking several points :
1. Check with the right set of permissions : for each table ref that
participates in a view there were the right credentials to use in it's
security_ctx member, but these weren't used for checking the credentials.
This makes hard enforcing the SQL SECURITY DEFINER|INVOKER property
consistently.
2. Because of the above the security checking for views was just ruled out
in explicit ways in several places.
3. The security was checked only for the columns of the tables that are
brought into the query from a view. So if there is no column reference
outside of the view definition it was not detecting the lack of access to
the tables in the view in SQL SECURITY INVOKER mode.
The fix below tries to fix the above 3 points.
Replaced COND_refresh with COND_global_read_lock becasue of a bug in NTPL threads when using different mutexes as arguments to pthread_cond_wait()
The original code caused a hang in FLUSH TABLES WITH READ LOCK in some circumstances because pthread_cond_broadcast() was not delivered to other threads.
This fixes:
Bug#16986: Deadlock condition with MyISAM tables
Bug#20048: FLUSH TABLES WITH READ LOCK causes a deadlock
specific to 5.0 version of the patch is motivated by the fact that a wrapper over
MYSQLLOG::write can not help in 5.0 where query's charset is embedded into event instance in the constructor.
A pattern to generate binlog for DROPped temp table in close_temporary_tables
was buggy: could not deal with a grave-accent-in-name table.
The fix exploits `append_identifier()' for quoting and duplicating accents.
Binlog lacks encoding info about DROPped temporary table.
Idea of the fix is to switch temporary to system_charset_info when a temporary table
is DROPped for binlog. Since that is the server, that automatically, but not the client, who generates the query
the binlog should be updated on the server's encoding for the coming DROP.
The `write_binlog_with_system_charset()' is introduced to replace similar problematic places in the code.
or implicitly uses stored function gives "Table not locked" error'
CREATE TABLE ... SELECT ... statement which was explicitly or implicitly
(through view) using stored function gave "Table not locked" error.
The actual bug resides in the current locking scheme of CREATE TABLE SELECT
code, which first opens and locks tables of the SELECT statement itself,
and then, having SELECT tables locked, creates the .FRM, opens the .FRM and
acquires lock on it. This scheme opens a possibility for a deadlock, which
was present and ignored since version 3.23 or earlier. This scheme also
conflicts with the invariant of the prelocking algorithm -- no table can
be open and locked while there are tables locked in prelocked mode.
The patch makes an exception for this invariant when doing CREATE TABLE ...
SELECT, thus extending the possibility of a deadlock to the prelocked mode.
We can't supply a better fix in 5.0.
Bug #19606: ssl variables are not displayed in show variables
Bug #19616: log_queries_not_using_indexes is not listed in show variables
Make basedir, datadir, tmpdir, log_queries_not_using_indexes, ssl_ca,
ssl_capath, ssl_cert, ssl_cipher, and ssl_key all available both from
SHOW VARIABLES and as @@variables.
As a side-effect of this change, log_queries_not_using_indexes can
be changed at runtime (but only globally, not per-connection).
This performance degradation was due to the fact that some
cost evaluation code added into 4.1 in the function find_best was
not merged into the code of the function best_access_path added
together with other code for greedy optimizer.
Added a parameter to the function print_plan. The parameter contains
accumulated cost for a given partial join.
The patch does not include a special test case since this performance
degradation is hard to reproduse with a simple example.
TODO: make the function find_best use the function best_access_path
in order to remove duplication of code which might result in incomplete
merges in the future.
too many open statements". The patch adds a new global variable
@@max_prepared_stmt_count. This variable limits the total number
of prepared statements in the server. The default value of
@@max_prepared_stmt_count is 16382. 16382 small statements
(a select against 3 tables with GROUP, ORDER and LIMIT) consume
100MB of RAM. Once this limit has been reached, the server will
refuse to prepare a new statement and return ER_UNKNOWN_ERROR
(unfortunately, we can't add new errors to 4.1 without breaking 5.0). The limit is changeable after startup
and can accept any value from 0 to 1 million. In case
the new value of the limit is less than the current
statement count, no new statements can be added, while the old
still can be used. Additionally, the current count of prepared
statements is now available through a global read-only variable
@@prepared_stmt_count.
After FLUSH STATUS max_used_connections was reset to 0, and haven't
been updated while cached threads were reused, until the moment a new
thread was created.
The first suggested fix from original bug report was implemented:
a) On flushing the status, set max_used_connections to
threads_connected, not to 0.
b) Check if it is necessary to increment max_used_connections when
taking a thread from the cache as well as when creating new threads
The GROUP_CONCAT uses its own temporary table. When ROLLUP is present
it creates the second copy of Item_func_group_concat. This copy receives the
same list of arguments that original group_concat does. When the copy is
set up the result_fields of functions from the argument list are reset to the
temporary table of this copy.
As a result of this action data from functions flow directly to the ROLLUP copy
and the original group_concat functions shows wrong result.
Since queries with COUNT(DISTINCT ...) use temporary tables to store
the results the COUNT function they are also affected by this bug.
The idea of the fix is to copy content of the result_field for the function
under GROUP_CONCAT/COUNT from the first temporary table to the second one,
rather than setting result_field to point to the second temporary table.
To achieve this goal force_copy_fields flag is added to Item_func_group_concat
and Item_sum_count_distinct classes. This flag is initialized to 0 and set to 1
into the make_unique() member function of both classes.
To the TMP_TABLE_PARAM structure is modified to include the similar flag as
well.
The create_tmp_table() function passes that flag to create_tmp_field().
When the flag is set the create_tmp_field() function will set result_field
as a source field and will not reset that result field to newly created
field for Item_func_result_field and its descendants. Due to this there
will be created copy func to copy data from old result_field to newly
created field.
¨MySQL server crashes if you try to access to InnoDB table¨
crash caused by schizophrenic mysqld - 2 memory locations for logically same function
with conflicting values.
Fixed by backporting from 5.1 changes to have_xyz_db declarations.
if --skip-grant-tables specified.
The problem is that there is a check that prevents creating a definer
with empty host name.
In --skip-grant-tables mode this check prevents the user from creating a
trigger/view without explicitly specifying its definer. This happens, because
in --skip-grant-tables mode CURRENT_USER is ''@''. According to Sanja this
check was implemented intentionally.
However, according to the MySQL manual it is possible to specify empty host
name (as well as empty user name). Moreover, the behaviour for stored routines
is different in this aspect -- we allow them to be created with implicit
definer.
Based on this, we believe it is OK to change the behaviour for views to be
similar with the behaviour for stored routines.
The idea of the fix is to extend support of non-SUID triggers for backward
compatibility. Formerly non-SUID triggers were appeared when "new" server
is being started against "old" database. Now, they are also created when
"new" slave receives updates from "old" master.
- Added empty constructors and virtual destructors to many classes and structs
- Removed some usage of the offsetof() macro to instead use C++ class pointers
trigger starts trigger".
In short, the deadlock/crash happened when execution of statement, which used
stored functions or activated triggers, coincided with alteration of the
tables used by these functions or triggers (in highly concurrent environment).
Bug was caused by the incorrect handling of tables from prelocked set in
open_tables() functions in situations when refresh happened. This fix replaces
old smart but not very robust way of handling tables after refresh (which was
closing only old tables), with new one which simply closes all tables opened so
far and restarts open_tables().
Also fixed handling of temporary tables in close_tables_for_reopen().
No test case present since bug manifests itself only in concurrent environment.
Problem #1: INSERT...SELECT, Version for 5.0.
Extended the unique table check by a check of lock data.
Merge sub-tables cannot be detected by doing name checks only.
Problem #1: INSERT...SELECT, Version for 4.1.
INSERT ... SELECT with the same table on both sides (hidden
below a MERGE table) does now work by buffering the select result.
The duplicate detection works now after open_and_lock_tables()
on the locks.
I did not find a test case that failed without the change in
sql_update.cc. I made the change anyway as it should in theory
fix a possible MERGE table problem with multi-table update.
according to the standard.
The idea is to use Field-classes to implement stored routines
variables. Also, we should provide facade to Item-hierarchy
by Item_field class (it is necessary, since SRVs take part
in expressions).
The patch fixes the following bugs:
- BUG#8702: Stored Procedures: No Error/Warning shown for inappropriate data
type matching;
- BUG#8768: Functions: For any unsigned data type, -ve values can be passed
and returned;
- BUG#8769: Functions: For Int datatypes, out of range values can be passed
and returned;
- BUG#9078: STORED PROCDURE: Decimal digits are not displayed when we use
DECIMAL datatype;
- BUG#9572: Stored procedures: variable type declarations ignored;
- BUG#12903: upper function does not work inside a function;
- BUG#13705: parameters to stored procedures are not verified;
- BUG#13808: ENUM type stored procedure parameter accepts non-enumerated
data;
- BUG#13909: Varchar Stored Procedure Parameter always BINARY string (ignores
CHARACTER SET);
- BUG#14161: Stored procedure cannot retrieve bigint unsigned;
- BUG#14188: BINARY variables have no 0x00 padding;
- BUG#15148: Stored procedure variables accept non-scalar values;
