The patch for MDEV-15530 incorrectly added a column in the middle of SHOW
SLAVE STATUS output. This is wrong, as it breaks backwards compatibility
with existing applications and scripts. In this case, it even broke
mariadb-dump, which is included in the server source tree!
Revert the incorrect change, putting the new Replicate_Rewrite_DB at the end
of SHOW SLAVE STATUS output.
Add a testcase for the mariadb-dump --dump-slave wrong output problem. Also
add a testcase rpl.rpl_show_slave_status to hopefully prevent any future
incorrect additions to SHOW SLAVE STATUS.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
- Add `replicate_rewrite_db` status variable, that may accept comma
separated key-value pairs.
- Note that option `OPT_REPLICATE_REWRITE_DB` already existed in `mysqld.h`
from this commit 23d8586dbf
Reviewer:Brandon Nesterenko <brandon.nesterenko@mariadb.com>
This commit makes replicas crash-safe by default by changing the
Using_Gtid value to be Slave_Pos on a fresh slave start and after
RESET SLAVE is issued. If the primary server does not support GTIDs
(i.e., version < 10), the replica will fall back to Using_Gtid=No on
slave start and after RESET SLAVE.
The following additional informational messages/warnings are added:
1. When Using_Gtid is automatically changed. That is, if RESET
SLAVE reverts Using_Gtid back to Slave_Pos, or Using_Gtid is
inferred to No from a CHANGE MASTER TO given with log coordinates
without MASTER_USE_GTID.
2. If options are ignored in CHANGE MASTER TO. If CHANGE MASTER TO
is given with log coordinates, yet also specifies
MASTER_USE_GTID=Slave_Pos, a warning message is given that the log
coordinate options are ignored.
Additionally, an MTR macro has been added for RESET SLAVE,
reset_slave.inc, which provides modes/options for resetting a slave
in log coordinate or gtid modes. When in log coordinates mode, the
macro will execute CHANGE MASTER TO MASTER_USE_GTID=No after the
RESET SLAVE command. When in GTID mode, an extra parameter,
reset_slave_keep_gtid_state, can be set to reset or preserve the
value of gtid_slave_pos.
Reviewed By:
===========
Andrei Elkin <andrei.elkin@mariadb.com>
Description:
============
To change 'CONSERVATIVE' @@global.slave_parallel_mode default to 'OPTIMISTIC'
in 10.5.
@sql/sys_vars.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/rpl_filter.cc
Changed default parallel_mode to 'OPTIMISTIC'
@sql/mysqld.cc
Removed the initialization of 'SLAVE_PARALLEL_CONSERVATIVE' to
'opt_slave_parallel_mode' variable.
@mysql-test/suite/rpl/t/rpl_parallel_mdev6589.test
@mysql-test/suite/rpl/t/rpl_mdev6386.test
Added 'mtr' suppression to ignore 'ER_PRIOR_COMMIT_FAILED'. In case of
'OPTIMISTIC' mode if a transaction gets killed during "wait_for_prior_commit"
it results in above error "1964". Hence suppression needs to be added for this
error.
@mysql-test/suite/rpl/t/rpl_parallel_conflicts.test
Test has a 'slave.opt' which explicitly sets slave_parallel_mode to
'conservative'. When the test ends this mode conflicts with new default mode.
Hence check test case reports an error. The 'slave.opt' is removed and options
are set and reset within test.
@mysql-test/suite/multi_source/info_logs.result
@mysql-test/suite/multi_source/reset_slave.result
@mysql-test/suite/multi_source/simple.result
Result content mismatch in "show slave status" output. This is expected as new
slave_parallel_mode='OPTIMISTIC'.
@mysql-test/include/check-testcase.test
Updated default 'slave_parallel_mode' to 'optimistic'.
Refactored rpl_parallel.test into following test cases.
Test case 1: @mysql-test/suite/rpl/t/rpl_parallel_domain.test
Test case 2: @mysql-test/suite/rpl/t/rpl_parallel_domain_slave_single_grp.test
Test case 3: @mysql-test/suite/rpl/t/rpl_parallel_single_grpcmt.test
Test case 4: @mysql-test/suite/rpl/t/rpl_parallel_stop_slave.test
Test case 5: @mysql-test/suite/rpl/t/rpl_parallel_slave_bgc_kill.test
Test case 6: @mysql-test/suite/rpl/t/rpl_parallel_gco_wait_kill.test
Test case 7: @mysql-test/suite/rpl/t/rpl_parallel_free_deferred_event.test
Test case 8: @mysql-test/suite/rpl/t/rpl_parallel_missed_error_handling.test
Test case 9: @mysql-test/suite/rpl/t/rpl_parallel_innodb_lock_conflict.test
Test case 10: @mysql-test/suite/rpl/t/rpl_parallel_gtid_slave_pos_update_fail.test
Test case 11: @mysql-test/suite/rpl/t/rpl_parallel_wrong_exec_master_pos.test
Test case 12: @mysql-test/suite/rpl/t/rpl_parallel_partial_binlog_trans.test
Test case 13: @mysql-test/suite/rpl/t/rpl_parallel_ignore_error_on_rotate.test
Test case 14: @mysql-test/suite/rpl/t/rpl_parallel_wrong_binlog_order.test
Test case 15: @mysql-test/suite/rpl/t/rpl_parallel_incorrect_relay_pos.test
Test case 16: @mysql-test/suite/rpl/t/rpl_parallel_retry_deadlock.test
Test case 17: @mysql-test/suite/rpl/t/rpl_parallel_deadlock_corrupt_binlog.test
Test case 18: @mysql-test/suite/rpl/t/rpl_parallel_mode.test
Test case 19: @mysql-test/suite/rpl/t/rpl_parallel_analyze_table_hang.test
Test case 20: @mysql-test/suite/rpl/t/rpl_parallel_record_gtid_wakeup.test
Test case 21: @mysql-test/suite/rpl/t/rpl_parallel_stop_on_con_kill.test
Test case 22: @mysql-test/suite/rpl/t/rpl_parallel_rollback_assert.test
In this commit we are adding three more status variable to SHOW SLAVE
STATUS. Slave_DDL_Events and Slave_Non_Transactional_Events.
Slave_DDL_Groups:- This status variable counts the occurrence of DDL
statements
Slave_Non_Transactional_Groups:- This variable count the occurrence
of non-transnational event group.
Slave_Transactional_Groups:- This variable count the occurrence
of transnational event group.
Patch Credit:- Kristian Nielsen
Merge feature into 10.2 from feature branch.
Delayed replication adds an option
CHANGE MASTER TO master_delay=<seconds>
Replication will then delay applying events with that many
seconds. This creates a replication slave that reflects the state of
the master some time in the past.
Feature is ported from MySQL source tree.
Signed-off-by: Kristian Nielsen <knielsen@knielsen-hq.org>
1. use include/show_binlog_events.inc instead of SHOW BINLOG EVENTS
2. use include/show_relaylog_eventc.inc too
3. in all other places where a number might appear in the result
file, include binlog_start_pos.inc, calculate the position
like pos=`select $binlog_start_pos + 100`; and use
replace_result $pos <pos>
Adjust the configuration options, as discussed on the
maria-developers@ mailing list.
The option to hint a transaction to not be replicated in parallel is
now called @@skip_parallel_replication, consistent with
@@skip_replication.
And the --slave-parallel-mode is now simplified to have just one of
the following values:
none
minimal
conservative
optimistic
aggressive
This reflects successively harder efforts to find opportunities to run
things in parallel on the slave. It allows to extend the server with
more automatic heuristics in the future without having to introduce a
new configuration option for each and every one.
Implement a new mode for parallel replication. In this mode, all transactions
are optimistically attempted applied in parallel. In case of conflicts, the
offending transaction is rolled back and retried later non-parallel.
This is an early-release patch to facilitate testing, more changes to user
interface / options will be expected. The new mode is not enabled by default.
The problem was the Gtid_list event which is logged to the binlog in
10.0 and is not understood by the 5.5 server.
This event is supposed to be replaced with a dummy event for 5.5
servers. But the very first event logged in the very first binlog
has an empty list of GTID, which makes the event too short to be
replacable with an empty event.
The fix is to pad the empty Gtid_list event to be big enough to
be replacable by a dummy event.
Change of user interface to be more logical and more in line with expectations
to work similar to old-style replication.
User can now explicitly choose in CHANGE MASTER whether binlog position is
taken into account (master_gtid_pos=current_pos) or not (master_gtid_pos=
slave_pos) when slave connects to master.
@@gtid_pos is replaced by three separate variables @@gtid_slave_pos (can
be set by user, replicated GTIDs only), @@gtid_binlog_pos (read only), and
@@gtid_current_pos (a combination of the two, most recent GTID within each
domain). mysql.rpl_slave_state is renamed to mysql.gtid_slave_pos to match.
This fixes MDEV-4474.
Adjust full test suite to work with GTID.
Huge patch, mainly due to having to update .result file for all SHOW BINLOG
EVENTS and mysqlbinlog outputs, where the new GTID events pop up.
Everything was painstakingly checked to be still correct and valid .result
file updates.
Changed names of multi-source log files so that original suffixes are kept.
include/my_sys.h:
Added fn_ext2(), which returns pointer to last '.' in file name
mysql-test/extra/rpl_tests/rpl_max_relay_size.test:
Updated test
mysql-test/suite/multi_source/info_logs-master.opt:
Test with strange file names
mysql-test/suite/multi_source/info_logs.result:
Updated results
mysql-test/suite/multi_source/info_logs.test:
Changed to test with complex names to be able to verify the filename generator code
mysql-test/suite/multi_source/relaylog_events.result:
Updated results
mysql-test/suite/multi_source/reset_slave.result:
Updated results
mysql-test/suite/multi_source/skip_counter.result:
Updated results
mysql-test/suite/multi_source/skip_counter.test:
Added testing of max_relay_log_size
mysql-test/suite/rpl/r/rpl_row_max_relay_size.result:
Updated results
mysql-test/suite/rpl/r/rpl_stm_max_relay_size.result:
Updated results
mysql-test/suite/sys_vars/r/max_relay_log_size_basic.result:
Updated results
mysql-test/suite/sys_vars/t/max_relay_log_size_basic.test:
Updated results
mysys/mf_fn_ext.c:
Added fn_ext2(), which returns pointer to last '.' in file name
sql/log.cc:
Removed some wrong casts
sql/log.h:
Updated comment to reflect new code
sql/log_event.cc:
Updated DBUG_PRINT
sql/mysqld.cc:
Added that max_relay_log_size copies it's values from max_binlog_size
sql/mysqld.h:
Removed max_relay_log_size
sql/rpl_mi.cc:
Changed names of multi-source log files so that original suffixes are kept.
sql/rpl_mi.h:
Updated prototype
sql/rpl_rli.cc:
Updated comment to reflect new code
Made max_relay_log_size depending on master connection.
sql/rpl_rli.h:
Made max_relay_log_size depending on master connection.
sql/set_var.h:
Made option global so that one can check and change min & max values (sorry Sergei)
sql/sql_class.h:
Made max_relay_log_size depending on master connection.
sql/sql_repl.cc:
Updated calls to create_signed_file_name()
sql/sys_vars.cc:
Made max_relay_log_size depending on master connection.
Made old code more reusable
sql/sys_vars.h:
Changed Sys_var_multi_source_uint to ulong to be able to handle max_relay_log_size
Made old code more reusable
- Added parameter to reset_logs() so that one can specify if new logs should be created.
mysql-test/include/setup_fake_relay_log.inc:
There is no orphan relay log files anymore
mysql-test/mysql-test-run.pl:
Added multi_source to test suite
mysql-test/suite/multi_source/info_logs.result:
New test
mysql-test/suite/multi_source/info_logs.test:
New test
mysql-test/suite/multi_source/my.cnf:
Added log-warnings to get more information to the log files
mysql-test/suite/multi_source/relaylog_events.result:
Added cleanup
mysql-test/suite/multi_source/relaylog_events.test:
Added cleanup
mysql-test/suite/multi_source/reset_slave.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.result:
Updated results after improved RESET SLAVE
mysql-test/suite/multi_source/simple.test:
Syncronize positions before show full slave status
mysql-test/suite/rpl/r/rpl_row_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
mysql-test/suite/rpl/r/rpl_stm_mix_show_relaylog_events.result:
Updated results after improved RESET SLAVE (we now use less relay log files)
sql/log.cc:
Added parameter to reset_logs() so that one can specify if new logs should be created.
sql/log.h:
Added parameter to reset_logs()
sql/rpl_mi.cc:
Create Master_info_index::index_file_names once at init
More DBUG_PRINT
Give error if Master_info_index::check_duplicate_master_info fails
sql/rpl_rli.cc:
If we do a full reset, don't create any new relay log files.
sql/share/errmsg-utf8.txt:
Improved error message if connection exists
sql/sql_parse.cc:
Fixed memory leak
sql/sql_repl.cc:
check_duplicate_master_info() now generates an error
Added parameter to reset_logs()
