Adding @@session and @@global prefixes to a
declared variable in a stored procedure the server
would lead to a crash.
The reason was that during the parsing of the
syntactic rule 'option_value' an uninitialized
set_var object was pushed to the parameter stack
of the SET statement. The parent rule
'option_type_value' interpreted the existence of
variables on the parameter stack as an assignment
and wrapped it in a sp_instr_set object.
As the procedure later was executed an attempt
was made to run the method 'check()' on an
uninitialized member object (NULL value) belonging
to the previously created but uninitialized object.
Problem: using null microsecond part in a WHERE condition
(e.g. WHERE date_time_field <= "YYYY-MM-DD HH:MM:SS.0000")
may lead to wrong results due to improper DATETIMEs
comparison in some cases.
Fix: comparing DATETIMEs as strings we must trim trailing 0's
in such cases.
The problem was in incorrect handling of predicates involving
NULL as a constant value by the range optimizer.
For example, when creating a SEL_ARG node from a condition of
the form "field < const" (which would normally result in the
"NULL < field < const" SEL_ARG), the special case when "const"
is NULL was not taken into account, so "NULL < field < NULL"
was produced for the "field < NULL" condition.
As a result, SEL_ARG structures of this form could not be
further optimized which in turn could lead to incorrectly
constructed SEL_ARG trees. In particular, code assuming SEL_ARG
structures to always form a sequence of ordered disjoint
intervals could enter an infinite loop under some
circumstances.
Fixed by changing get_mm_leaf() so that for any sargable
predicate except "<=>" involving NULL as a constant, "empty"
SEL_ARG is returned, since such a predicate is always false.
view that has Group By
When SELECT'ing from a view that mentions another,
materialized, view, access was being denied. The issue was
resolved by lifting a special case which avoided such access
checking in check_single_table_access. In the past, this was
necessary since if such a check were performed, the error
message would be downgraded to a warning in the case of SHOW
CREATE VIEW. The downgrading of errors was meant to handle
only that scenario, but could not distinguish the two as it
read only the error messages.
The special case was needed in the fix of bug no 36086.
Before that, views were confused with derived tables.
After bug no 35996 was fixed, the manipulation of errors
during SHOW CREATE VIEW execution is not dependent on the
actual error messages in the queue, it rather looks at the
actual cause of the error and takes appropriate
action. Hence the aforementioned special case is now
superfluous and the bug is fixed.
columns without where/group
Simple SELECT with implicit grouping used to return many rows if
the query was ordered by the aggregated column in the SELECT
list. This was incorrect because queries with implicit grouping
should only return a single record.
The problem was that when JOIN:exec() decided if execution needed
to handle grouping, it was assumed that sum_func_count==0 meant
that there were no aggregate functions in the query. This
assumption was not correct in JOIN::exec() because the aggregate
functions might have been optimized away during JOIN::optimize().
The reason why queries without ordering behaved correctly was
that sum_func_count is only recalculated if the optimizer chooses
to use temporary tables (which it does in the ordered case).
Hence, non-ordered queries were correctly treated as grouped.
The fix for this bug was to remove the assumption that
sum_func_count==0 means that there is no need for grouping. This
was done by introducing variable "bool implicit_grouping" in the
JOIN object.
Difficult to debug due to lacking report
This does not solve the real issue, but extracts server log when it happens
Forst commit was incomplete, didn't cover all cases
The BINLOG statement was sharing too much code with the slave SQL thread, introduced with
the patch for Bug#32407. This caused statements to be logged with the wrong server_id, the
id stored inside the events of the BINLOG statement rather than the id of the running
server.
Fix by rearranging code a bit so that only relevant parts of the code are executed by
the BINLOG statement, and the server_id of the server executing the statements will
not be overrided by the server_id stored in the 'format description BINLOG statement'.
The problem was in incorrect handling of predicates involving
NULL as a constant value by the range optimizer.
For example, when creating a SEL_ARG node from a condition of
the form "field < const" (which would normally result in the
"NULL < field < const" SEL_ARG), the special case when "const"
is NULL was not taken into account, so "NULL < field < NULL"
was produced for the "field < NULL" condition.
As a result, SEL_ARG structures of this form could not be
further optimized which in turn could lead to incorrectly
constructed SEL_ARG trees. In particular, code assuming SEL_ARG
structures to always form a sequence of ordered disjoint
intervals could enter an infinite loop under some
circumstances.
Fixed by changing get_mm_leaf() so that for any sargable
predicate except "<=>" involving NULL as a constant, "empty"
SEL_ARG is returned, since such a predicate is always false.
Problem: using null microsecond part (e.g. "YYYY-MM-DD HH:MM:SS.0000")
in a WHERE condition may lead to wrong results due to improper
DATETIMEs comparison in some cases.
Fix: as we compare DATETIMEs as strings we must trim trailing 0's
in such cases.
In MySQL when the mapping for space is changed to something other than
0x20 by defining a different collation, then space is not ignored when
comparing two strings.
This was happening because the function that performs the comparison
of two strings while ignoring ending spaces, was comparing the collation
value of a space with the ascii value of the ' ' character. This should
be changed to do comparison between the collated values.
low myisam_sort_buffer_size
Repair by sort (default) or parallel repair of a MyISAM table
(doesn't matter partitioned or not) as well as bulk inserts
and enable indexes some times didn't failover to repair with
key cache.
The problem was that after unsuccessful attempt, data file was
closed. Whereas repair with key cache requires open data file.
Fixed by reopening data file.
Also fixed a valgrind warning, which may appear during repair
by sort or parallel repair with certain myisam_sort_buffer_size
number of rows and length of an index entry (very dependent).
From r5917 to r5940
Detailed revision comments:
r5917 | marko | 2009-09-16 04:56:23 -0500 (Wed, 16 Sep 2009) | 1 line
branches/zip: innobase_get_cset_width(): Cache the value of current_thd.
r5919 | vasil | 2009-09-16 13:37:13 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Whitespace cleanup in the ChangeLog.
r5920 | vasil | 2009-09-16 13:47:22 -0500 (Wed, 16 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for r5916.
r5922 | marko | 2009-09-17 01:32:08 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip: innodb-zip.test: Make the test work with zlib 1.2.3.3.
Apparently, the definition of compressBound() has slightly changed.
This has been filed as Mantis Issue #345.
r5924 | vasil | 2009-09-17 23:59:30 -0500 (Thu, 17 Sep 2009) | 4 lines
branches/zip:
White space and formatting cleanup in the ChangeLog
r5934 | vasil | 2009-09-18 12:06:46 -0500 (Fri, 18 Sep 2009) | 4 lines
branches/zip:
Fix typo.
r5935 | calvin | 2009-09-18 16:08:02 -0500 (Fri, 18 Sep 2009) | 6 lines
branches/zip: fix bug#44338; minor non-functional changes
Bug#44338 innodb has message about non-existing option
innodb_max_files_open. Change the option to innodb_open_files.
The fix was committed into 6.0 branch.
r5938 | calvin | 2009-09-19 02:14:25 -0500 (Sat, 19 Sep 2009) | 41 lines
branches/zip: Merge revisions 2584:2956 from branches/6.0,
except c2932.
Bug#37232 and bug#31183 were fixed in the 6.0 branch only.
They should be fixed in the plugin too, specially MySQL 6.0
is discontinued at this point.
------------------------------------------------------------------------
r2604 | inaam | 2008-08-21 09:37:06 -0500 (Thu, 21 Aug 2008) | 8 lines
branches/6.0 bug#37232
Relax locking behaviour for REPLACE INTO t SELECT ... FROM t1.
Now SELECT on t1 is performed as a consistent read when the isolation
level is set to READ COMMITTED.
Reviewed by: Heikki
------------------------------------------------------------------------
r2605 | inaam | 2008-08-21 09:59:33 -0500 (Thu, 21 Aug 2008) | 7 lines
branches/6.0
Added a comment to clarify why distinct calls to read MySQL binary
log file name and log position do not entail any race condition.
Suggested by: Heikki
------------------------------------------------------------------------
r2956 | inaam | 2008-11-04 04:47:30 -0600 (Tue, 04 Nov 2008) | 11 lines
branches/6.0 bug#31183
If the system tablespace runs out of space because 'autoextend' is
not specified with innodb_data_file_path there was no error message
printed to the error log. The client would get 'table full' error.
This patch prints an appropriate error message to the error log.
rb://43
Approved by: Marko
------------------------------------------------------------------------
r5940 | vasil | 2009-09-21 00:26:04 -0500 (Mon, 21 Sep 2009) | 4 lines
branches/zip:
Add ChangeLog entries for c5938.
We set up DATE and TIMESTAMP differently in field-creation than we
did in field-MD creation (for CREATE). Admirably, ALTER TABLE
detected this and didn't damage any data, but it did initiate a
full copy/conversion, which we don't really need to do.
Now we describe Field and Create_field the same for those types.
As a result, ALTER TABLE that only changes meta-data (like a
field's name) no longer forces a data-copy when there needn't
be one.
covering index
When two range predicates were combined under an OR
predicate, the algorithm tried to merge overlapping ranges
into one. But the case when a range overlapped several other
ranges was not handled. This lead to
1) ranges overlapping, which gave repeated results and
2) a range that overlapped several other ranges was cut off.
Fixed by
1) Making sure that a range got an upper bound equal to the
next range with a greater minimum.
2) Removing a continue statement
backport for bug#44059 from mysql-pe to mysql-5.1-bugteam
Using the partition with most rows instead of first partition
to estimate the cardinality of indexes.
