In any test that uses wait_all_purged.inc, ensure that InnoDB tables
will be created without persistent statistics.
This is a follow-up to commit cd04673a17
after a similar failure was observed in the innodb_zip.blob test.
The motivation of introducing the parameter
innodb_purge_rseg_truncate_frequency in
mysql/mysql-server@28bbd66ea5 and
mysql/mysql-server@8fc2120fed
seems to have been to avoid stalls due to freeing undo log pages
or truncating undo log tablespaces. In MariaDB Server,
innodb_undo_log_truncate=ON should be a much lighter operation
than in MySQL, because it will not involve any log checkpoint.
Another source of performance stalls should be
trx_purge_truncate_rseg_history(), which is shrinking the history list
by freeing the undo log pages whose undo records have been purged.
To alleviate that, we will introduce a purge_truncation_task that will
offload this from the purge_coordinator_task. In that way, the next
innodb_purge_batch_size pages may be parsed and purged while the pages
from the previous batch are being freed and the history list being shrunk.
The processing of innodb_undo_log_truncate=ON will still remain the
responsibility of the purge_coordinator_task.
purge_coordinator_state::count: Remove. We will ignore
innodb_purge_rseg_truncate_frequency, and act as if it had been
set to 1 (the maximum shrinking frequency).
purge_coordinator_state::do_purge(): Invoke an asynchronous task
purge_truncation_callback() to free the undo log pages.
purge_sys_t::iterator::free_history(): Free those undo log pages
that have been processed. This used to be a part of
trx_purge_truncate_history().
purge_sys_t::clone_end_view(): Take a new value of purge_sys.head
as a parameter, so that it will be updated while holding exclusive
purge_sys.latch. This is needed for race-free access to the field
in purge_truncation_callback().
Reviewed by: Vladislav Lesin
1. Exclude merging history rows into fts index.
The check !history_fts && (index->type & DICT_FTS) was just incorrect
attempt to avoid history in fts index.
2. Don't check for duplicates for history rows.
- This patch does the following:
git revert --no-commit 673243c893
git revert --no-commit 6c669b9586
git revert --no-commit bacaf2d4f4
git checkout HEAD mysql-test
git revert --no-commit 1fd7d3a9ad
Above command reverts MDEV-29277, MDEV-25581, MDEV-29342.
When binlog is enabled, trasaction takes a lot of time to do
sync operation on innodb fts table. This leads to block
of other transaction commit. To avoid this failure, remove
the fulltext sync operation during transaction commit. So
reverted MDEV-25581 related patches.
We filed MDEV-31105 to avoid the memory consumption
problem during fulltext sync operation.
In MariaDB, we have a confusing problem where:
* The transaction_isolation option can be set in a configuration file, but it cannot be set dynamically.
* The tx_isolation system variable can be set dynamically, but it cannot be set in a configuration file.
Therefore, we have two different names for the same thing in different contexts. This is needlessly confusing, and it complicates the documentation. The same thing applys for transaction_read_only.
MySQL 5.7 solved this problem by making them into system variables. https://dev.mysql.com/doc/relnotes/mysql/5.7/en/news-5-7-20.html
This commit takes a similar approach by adding new system variables and marking the original ones as deprecated. This commit also resolves some legacy problems related to SET STATEMENT and transaction_isolation.
mtr uses group suffix, but some existing inc and test files use
server_id for expect files. This patch aims to fix that.
For spider:
With this change we will not have to maintain a separate version of
restart_mysqld.inc for spider, that duplicates code, just because
spider tests use different names for expect files, and shutdown_mysqld
requires magical names for them.
With this change spider tests will also be able to use other features
provided by restart_mysqld.inc without code duplication, like the
parameter $restart_parameters (see e.g. the testcase mdev_29904.test
in commit ef1161e5d4f).
Tests run after this change: default, spider, rocksdb, galera, using
the following command
mtr --parallel=auto --force --max-test-fail=0 --skip-core-file
mtr --suite spider,spider/*,spider/*/* \
--skip-test="spider/oracle.*|.*/t\..*" --parallel=auto --big-test \
--force --max-test-fail=0 --skip-core-file
mtr --suite galera --parallel=auto
mtr --suite rocksdb --parallel=auto
- rollback_inplace_alter_table() locks the fts internal tables.
At the time, insert tries to fetch the doc id from config table,
fails to lock the config table and returns doc id as 0.
fts_cmp_set_sync_doc_id(): Retry to fetch the doc id again if
it encounter DB_LOCK_WAIT_TIMEOUT error
This includes all test changes from
"Changing all cost calculation to be given in milliseconds"
and forwards.
Some of the things that caused changes in the result files:
- As part of fixing tests, I added 'echo' to some comments to be able to
easier find out where things where wrong.
- MATERIALIZED has now a higher cost compared to X than before. Because
of this some MATERIALIZED types have changed to DEPENDEND SUBQUERY.
- Some test cases that required MATERIALIZED to repeat a bug was
changed by adding more rows to force MATERIALIZED to happen.
- 'Filtered' in SHOW EXPLAIN has in many case changed from 100.00 to
something smaller. This is because now filtered also takes into
account the smallest possible ref access and filters, even if they
where not used. Another reason for 'Filtered' being smaller is that
we now also take into account implicit filtering done for subqueries
using FIRSTMATCH.
(main.subselect_no_exists_to_in)
This is caluculated in best_access_path() and stored in records_out.
- Table orders has changed because more accurate costs.
- 'index' and 'ALL' for small tables has changed to use 'range' or
'ref' because of optimizer_scan_setup_cost.
- index can be changed to 'range' as 'range' optimizer assumes we don't
have to read the blocks from disk that range optimizer has already read.
This can be confusing in the case where there is no obvious where clause
but instead there is a hidden 'key_column > NULL' added by the optimizer.
(main.subselect_no_exists_to_in)
- Scan on primary clustered key does not report 'Using Index' anymore
(It's a table scan, not an index scan).
- For derived tables, the number of rows is now 100 instead of 2,
which can be seen in EXPLAIN.
- More tests have "Using index for group by" as the cost of this
optimization is now more correct (lower).
- A primary key could be preferred for a normal key, even if it would
access more rows, as it's faster to do 1 lokoup and 3 'index_next' on a
clustered primary key than one lookup trough a secondary.
(main.stat_tables_innodb)
Notes:
- There was a 4.7% more calls to best_extension_by_limited_search() in
the main.greedy_optimizer test. However examining the test results
it looked that the plans where slightly better (eq_ref where more
chained together) so I assume this is ok.
- I have verified a few test cases where there was notable/unexpected
changes in the plan and in all cases the new optimizer plans where
faster. (main.greedy_optimizer and some others)
Before this patch, when calculating the cost of fetching and using a
row/key from the engine, we took into account the cost of finding a
row or key from the engine, but did not consistently take into account
index only accessed, clustered key or covered keys for all access
paths.
The cost of the WHERE clause (TIME_FOR_COMPARE) was not consistently
considered in best_access_path(). TIME_FOR_COMPARE was used in
calculation in other places, like greedy_search(), but was in some
cases (like scans) done an a different number of rows than was
accessed.
The cost calculation of row and index scans didn't take into account
the number of rows that where accessed, only the number of accepted
rows.
When using a filter, the cost of index_only_reads and cost of
accessing and disregarding 'filtered rows' where not taken into
account, which made filters cost less than there actually where.
To remedy the above, the following key & row fetch related costs
has been added:
- The cost of fetching and using a row is now split into different costs:
- key + Row fetch cost (as before) but multiplied with the variable
'optimizer_cache_cost' (default to 0.5). This allows the user to
tell the optimizer the likehood of finding the key and row in the
engine cache.
- ROW_COPY_COST, The cost copying a row from the engine to the
sql layer or creating a row from the join_cache to the record
buffer. Mostly affects table scan costs.
- ROW_LOOKUP_COST, the cost of fetching a row by rowid.
- KEY_COPY_COST the cost of finding the next key and copying it from
the engine to the SQL layer. This is used when we calculate the cost
index only reads. It makes index scans more expensive than before if
they cover a lot of rows. (main.index_merge_myisam)
- KEY_LOOKUP_COST, the cost of finding the first key in a range.
This replaces the old define IDX_LOOKUP_COST, but with a higher cost.
- KEY_NEXT_FIND_COST, the cost of finding the next key (and rowid).
when doing a index scan and comparing the rowid to the filter.
Before this cost was assumed to be 0.
All of the above constants/variables are now tuned to be somewhat in
proportion of executing complexity to each other. There is tuning
need for these in the future, but that can wait until the above are
made user variables as that will make tuning much easier.
To make the usage of the above easy, there are new (not virtual)
cost calclation functions in handler:
- ha_read_time(), like read_time(), but take optimizer_cache_cost into
account.
- ha_read_and_copy_time(), like ha_read_time() but take into account
ROW_COPY_TIME
- ha_read_and_compare_time(), like ha_read_and_copy_time() but take
TIME_FOR_COMPARE into account.
- ha_rnd_pos_time(). Read row with row id, taking ROW_COPY_COST
into account. This is used with filesort where we don't need
to execute the WHERE clause again.
- ha_keyread_time(), like keyread_time() but take
optimizer_cache_cost into account.
- ha_keyread_and_copy_time(), like ha_keyread_time(), but add
KEY_COPY_COST.
- ha_key_scan_time(), like key_scan_time() but take
optimizer_cache_cost nto account.
- ha_key_scan_and_compare_time(), like ha_key_scan_time(), but add
KEY_COPY_COST & TIME_FOR_COMPARE.
I also added some setup costs for doing different types of scans and
creating temporary tables (on disk and in memory). This encourages
the optimizer to not use these for simple 'a few row' lookups if
there are adequate key lookup strategies.
- TABLE_SCAN_SETUP_COST, cost of starting a table scan.
- INDEX_SCAN_SETUP_COST, cost of starting an index scan.
- HEAP_TEMPTABLE_CREATE_COST, cost of creating in memory
temporary table.
- DISK_TEMPTABLE_CREATE_COST, cost of creating an on disk temporary
table.
When calculating cost of fetching ranges, we had a cost of
IDX_LOOKUP_COST (0.125) for doing a key div for a new range. This is
now replaced with 'io_cost * KEY_LOOKUP_COST (1.0) *
optimizer_cache_cost', which matches the cost we use for 'ref' and
other key lookups. The effect is that the cost is now a bit higher
when we have many ranges for a key.
Allmost all calculation with TIME_FOR_COMPARE is now done in
best_access_path(). 'JOIN::read_time' now includes the full
cost for finding the rows in the table.
In the result files, many of the changes are now again close to what
they where before the "Update cost for hash and cached joins" commit,
as that commit didn't fix the filter cost (too complex to do
everything in one commit).
The above changes showed a lot of a lot of inconsistencies in
optimizer cost calculation. The main objective with the other changes
was to do calculation as similar (and accurate) as possible and to make
different plans more comparable.
Detailed list of changes:
- Calculate index_only_cost consistently and correctly for all scan
and ref accesses. The row fetch_cost and index_only_cost now
takes into account clustered keys, covered keys and index
only accesses.
- cost_for_index_read now returns both full cost and index_only_cost
- Fixed cost calculation of get_sweep_read_cost() to match other
similar costs. This is bases on the assumption that data is more
often stored on SSD than a hard disk.
- Replaced constant 2.0 with new define TABLE_SCAN_SETUP_COST.
- Some scan cost estimates did not take into account
TIME_FOR_COMPARE. Now all scan costs takes this into
account. (main.show_explain)
- Added session variable optimizer_cache_hit_ratio (default 50%). By
adjusting this on can reduce or increase the cost of index or direct
record lookups. The effect of the default is that key lookups is now
a bit cheaper than before. See usage of 'optimizer_cache_cost' in
handler.h.
- JOIN_TAB::scan_time() did not take into account index only scans,
which produced a wrong cost when index scan was used. Changed
JOIN_TAB:::scan_time() to take into consideration clustered and
covered keys. The values are now cached and we only have to call
this function once. Other calls are changed to use the cached
values. Function renamed to JOIN_TAB::estimate_scan_time().
- Fixed that most index cost calculations are done the same way and
more close to 'range' calculations. The cost is now lower than
before for small data sets and higher for large data sets as we take
into account how many keys are read (main.opt_trace_selectivity,
main.limit_rows_examined).
- Ensured that index_scan_cost() ==
range(scan_of_all_rows_in_table_using_one_range) +
MULTI_RANGE_READ_INFO_CONST. One effect of this is that if there
is choice of doing a full index scan and a range-index scan over
almost the whole table then index scan will be preferred (no
range-read setup cost). (innodb.innodb, main.show_explain,
main.range)
- Fixed the EQ_REF and REF takes into account clustered and covered
keys. This changes some plans to use covered or clustered indexes
as these are much cheaper. (main.subselect_mat_cost,
main.state_tables_innodb, main.limit_rows_examined)
- Rowid filter setup cost and filter compare cost now takes into
account fetching and checking the rowid (KEY_NEXT_FIND_COST).
(main.partition_pruning heap.heap_btree main.log_state)
- Added KEY_NEXT_FIND_COST to
Range_rowid_filter_cost_info::lookup_cost to account of the time
to find and check the next key value against the container
- Introduced ha_keyread_time(rows) that takes into account finding
the next row and copying the key value to 'record'
(KEY_COPY_COST).
- Introduced ha_key_scan_time() for calculating an index scan over
all rows.
- Added IDX_LOOKUP_COST to keyread_time() as a startup cost.
- Added index_only_fetch_cost() as a convenience function to
OPT_RANGE.
- keyread_time() cost is slightly reduced to prefer shorter keys.
(main.index_merge_myisam)
- All of the above caused some index_merge combinations to be
rejected because of cost (main.index_intersect). In some cases
'ref' where replaced with index_merge because of the low
cost calculation of get_sweep_read_cost().
- Some index usage moved from PRIMARY to a covering index.
(main.subselect_innodb)
- Changed cost calculation of filter to take KEY_LOOKUP_COST and
TIME_FOR_COMPARE into account. See sql_select.cc::apply_filter().
filter parameters and costs are now written to optimizer_trace.
- Don't use matchings_records_in_range() to try to estimate the number
of filtered rows for ranges. The reason is that we want to ensure
that 'range' is calculated similar to 'ref'. There is also more work
needed to calculate the selectivity when using ranges and ranges and
filtering. This causes filtering column in EXPLAIN EXTENDED to be
100.00 for some cases where range cannot use filtering.
(main.rowid_filter)
- Introduced ha_scan_time() that takes into account the CPU cost of
finding the next row and copying the row from the engine to
'record'. This causes costs of table scan to slightly increase and
some test to changed their plan from ALL to RANGE or ALL to ref.
(innodb.innodb_mysql, main.select_pkeycache)
In a few cases where scan time of very small tables have lower cost
than a ref or range, things changed from ref/range to ALL.
(main.myisam, main.func_group, main.limit_rows_examined,
main.subselect2)
- Introduced ha_scan_and_compare_time() which is like ha_scan_time()
but also adds the cost of the where clause (TIME_FOR_COMPARE).
- Added small cost for creating temporary table for
materialization. This causes some very small tables to use scan
instead of materialization.
- Added checking of the WHERE clause (TIME_FOR_COMPARE) of the
accepted rows to ROR costs in get_best_ror_intersect()
- Removed '- 0.001' from 'join->best_read' and optimize_straight_join()
to ensure that the 'Last_query_cost' status variable contains the
same value as the one that was calculated by the optimizer.
- Take avg_io_cost() into account in handler::keyread_time() and
handler::read_time(). This should have no effect as it's 1.0 by
default, except for heap that overrides these functions.
- Some 'ref_or_null' accesses changed to 'range' because of cost
adjustments (main.order_by)
- Added scan type "scan_with_join_cache" for optimizer_trace. This is
just to show in the trace what kind of scan was used.
- When using 'scan_with_join_cache' take into account number of
preceding tables (as have to restore all fields for all previous
table combination when checking the where clause)
The new cost added is:
(row_combinations * ROW_COPY_COST * number_of_cached_tables).
This increases the cost of join buffering in proportion of the
number of tables in the join buffer. One effect is that full scans
are now done earlier as the cost is then smaller.
(main.join_outer_innodb, main.greedy_optimizer)
- Removed the usage of 'worst_seeks' in cost_for_index_read as it
caused wrong plans to be created; It prefered JT_EQ_REF even if it
would be much more expensive than a full table scan. A related
issue was that worst_seeks only applied to full lookup, not to
clustered or index only lookups, which is not consistent. This
caused some plans to use index scan instead of eq_ref (main.union)
- Changed federated block size from 4096 to 1500, which is the
typical size of an IO packet.
- Added costs for reading rows to Federated. Needed as there is no
caching of rows in the federated engine.
- Added ha_innobase::rnd_pos_time() cost function.
- A lot of extra things added to optimizer trace
- More costs, especially for materialization and index_merge.
- Make lables more uniform
- Fixed a lot of minor bugs
- Added 'trace_started()' around a lot of trace blocks.
- When calculating ORDER BY with LIMIT cost for using an index
the cost did not take into account the number of row retrivals
that has to be done or the cost of comparing the rows with the
WHERE clause. The cost calculated would be just a fraction of
the real cost. Now we calculate the cost as we do for ranges
and 'ref'.
- 'Using index for group-by' is used a bit more than before as
now take into account the WHERE clause cost when comparing
with 'ref' and prefer the method with fewer row combinations.
(main.group_min_max).
Bugs fixed:
- Fixed that we don't calculate TIME_FOR_COMPARE twice for some plans,
like in optimize_straight_join() and greedy_search()
- Fixed bug in save_explain_data where we could test for the wrong
index when displaying 'Using index'. This caused some old plans to
show 'Using index'. (main.subselect_innodb, main.subselect2)
- Fixed bug in get_best_ror_intersect() where 'min_cost' was not
updated, and the cost we compared with was not the one that was
used.
- Fixed very wrong cost calculation for priority queues in
check_if_pq_applicable(). (main.order_by now correctly uses priority
queue)
- When calculating cost of EQ_REF or REF, we added the cost of
comparing the WHERE clause with the found rows, not all row
combinations. This made ref and eq_ref to be regarded way to cheap
compared to other access methods.
- FORCE INDEX cost calculation didn't take into account clustered or
covered indexes.
- JT_EQ_REF cost was estimated as avg_io_cost(), which is half the
cost of a JT_REF key. This may be true for InnoDB primary key, but
not for other unique keys or other engines. Now we use handler
function to calculate the cost, which allows us to handle
consistently clustered, covered keys and not covered keys.
- ha_start_keyread() didn't call extra_opt() if keyread was already
enabled but still changed the 'keyread' variable (which is wrong).
Fixed by not doing anything if keyread is already enabled.
- multi_range_read_info_cost() didn't take into account io_cost when
calculating the cost of ranges.
- fix_semijoin_strategies_for_picked_join_order() used the wrong
record_count when calling best_access_path() for SJ_OPT_FIRST_MATCH
and SJ_OPT_LOOSE_SCAN.
- Hash joins didn't provide correct best_cost to the upper level, which
means that the cost for hash_joins more expensive than calculated
in best_access_path (a difference of 10x * TIME_OF_COMPARE).
This is fixed in the new code thanks to that we now include
TIME_OF_COMPARE cost in 'read_time'.
Other things:
- Added some 'if (thd->trace_started())' to speed up code
- Removed not used function Cost_estimate::is_zero()
- Simplified testing of HA_POS_ERROR in get_best_ror_intersect().
(No cost changes)
- Moved ha_start_keyread() from join_read_const_table() to join_read_const()
to enable keyread for all types of JT_CONST tables.
- Made a few very short functions inline in handler.h
Notes:
- In main.rowid_filter the join order of order and lineitem is swapped.
This is because the cost of doing a range fetch of lineitem(98 rows) is
almost as big as the whole join of order,lineitem. The filtering will
also ensure that we only have to do very small key fetches of the rows
in lineitem.
- main.index_merge_myisam had a few changes where we are now using
less keys for index_merge. This is because index scans are now more
expensive than before.
- handler->optimizer_cache_cost is updated in ha_external_lock().
This ensures that it is up to date per statements.
Not an optimal solution (for locked tables), but should be ok for now.
- 'DELETE FROM t1 WHERE t1.a > 0 ORDER BY t1.a' does not take cost of
filesort into consideration when table scan is chosen.
(main.myisam_explain_non_select_all)
- perfschema.table_aggregate_global_* has changed because an update
on a table with 1 row will now use table scan instead of key lookup.
TODO in upcomming commits:
- Fix selectivity calculation for ranges with and without filtering and
when there is a ref access but scan is chosen.
For this we have to store the lowest known value for
'accepted_records' in the OPT_RANGE structure.
- Change that records_read does not include filtered rows.
- test_if_cheaper_ordering() needs to be updated to properly calculate
costs. This will fix tests like main.order_by_innodb,
main.single_delete_update
- Extend get_range_limit_read_cost() to take into considering
cost_for_index_read() if there where no quick keys. This will reduce
the computed cost for ORDER BY with LIMIT in some cases.
(main.innodb_ext_key)
- Fix that we take into account selectivity when counting the number
of rows we have to read when considering using a index table scan to
resolve ORDER BY.
- Add new calculation for rnd_pos_time() where we take into account the
benefit of reading multiple rows from the same page.
Before commit 6112853cda in MySQL 4.1.1
introduced the parameter innodb_file_per_table, all InnoDB data was
written to the InnoDB system tablespace (often named ibdata1).
A serious design problem is that once the system tablespace has grown to
some size, it cannot shrink even if the data inside it has been deleted.
There are also other design problems, such as the server hang MDEV-29930
that should only be possible when using innodb_file_per_table=0 and
innodb_undo_tablespaces=0 (storing both tables and undo logs in the
InnoDB system tablespace).
The parameter innodb_change_buffering was deprecated
in commit b5852ffbee.
Starting with commit baf276e6d4
(MDEV-19229) the number of innodb_undo_tablespaces can be increased,
so that the undo logs can be moved out of the system tablespace
of an existing installation.
If all these things (tables, undo logs, and the change buffer) are
removed from the InnoDB system tablespace, the only variable-size
data structure inside it is the InnoDB data dictionary.
DDL operations on .ibd files was optimized in
commit 86dc7b4d4c (MDEV-24626).
That should have removed any thinkable performance advantage of
using innodb_file_per_table=0.
Since there should be no benefit of setting innodb_file_per_table=0,
the parameter should be deprecated. Starting with MySQL 5.6 and
MariaDB Server 10.0, the default value is innodb_file_per_table=1.
The MDEV-25004 test innodb_fts.versioning is omitted because ever since
commit 685d958e38 InnoDB would not allow
writes to a database where the redo log file ib_logfile0 is missing.
1. In case of system-versioned table add row_end into FTS_DOC_ID index
in fts_create_common_tables() and innobase_create_key_defs().
fts_n_uniq() returns 1 or 2 depending on whether the table is
system-versioned.
After this patch recreate of FTS_DOC_ID index is required for
existing system-versioned tables. If you see this message in error
log or server warnings: "InnoDB: Table db/t1 contains 2 indexes
inside InnoDB, which is different from the number of indexes 1
defined in the MariaDB" use this command to fix the table:
ALTER TABLE db.t1 FORCE;
2. Fix duplicate history for secondary unique index like it was done
in MDEV-23644 for clustered index (932ec586aa). In case of
existing history row which conflicts with currently inseted row we
check in row_ins_scan_sec_index_for_duplicate() whether that row
was inserted as part of current transaction. In that case we
indicate with DB_FOREIGN_DUPLICATE_KEY that new history row is not
needed and should be silently skipped.
3. Some parts of MDEV-21138 (7410ff436e) reverted. Skipping of
FTS_DOC_ID index for history rows made problems with purge
system. Now this is fixed differently by p.2.
4. wait_all_purged.inc checks that we didn't affect non-history rows
so they are deleted and purged correctly.
Additional FTS fixes
fts_init_get_doc_id(): exclude history rows from max_doc_id
calculation. fts_init_get_doc_id() callback is used only for crash
recovery.
fts_add_doc_by_id(): set max value for row_end field.
fts_read_stopword(): stopwords table can be system-versioned too. We
now read stopwords only for current data.
row_insert_for_mysql(): exclude history rows from doc_id validation.
row_merge_read_clustered_index(): exclude history_rows from doc_id
processing.
fts_load_user_stopword(): for versioned table retrieve row_end field
and skip history rows. For non-versioned table we retrieve 'value'
field twice (just for uniformity).
FTS tests for System Versioning now include maybe_versioning.inc which
adds 3 combinations:
'vers' for debug build sets sysvers_force and
sysvers_hide. sysvers_force makes every created table
system-versioned, sysvers_hide hides WITH SYSTEM VERSIONING
for SHOW CREATE.
Note: basic.test, stopword.test and versioning.test do not
require debug for 'vers' combination. This is controlled by
$modify_create_table in maybe_versioning.inc and these
tests run WITH SYSTEM VERSIONING explicitly which allows to
test 'vers' combination on non-debug builds.
'vers_trx' like 'vers' sets sysvers_force_trx and sysvers_hide. That
tests FTS with trx_id-based System Versioning.
'orig' works like before: no System Versioning is added, no debug is
required.
Upgrade/downgrade test for System Versioning is done by
innodb_fts.versioning. It has 2 combinations:
'prepare' makes binaries in std_data (requires old server and OLD_BINDIR).
It tests upgrade/downgrade against old server as well.
'upgrade' tests upgrade against binaries in std_data.
Cleanups:
Removed innodb-fts-stopword.test as it duplicates stopword.test
