When do 'insert delayed' operation, the time_zone info doesn't be keeped in the row info.
So when we do insert sometime later, time_zone didn't write into binlog.
This will cause wrong result for timestamp column in slave.
Our solution is that adding time_zone info with the delayed-row and
restoring time_zone from row-info when execute that row in the furture by another thread.
So we can write correct time_zone info into binlog and got correct result in slave.
mysql-test/r/rpl_timezone.result:
Test result
mysql-test/t/rpl_timezone.test:
Add test for bug#41719
sql/sql_insert.cc:
Add time_zone info in the delayed-row and restore time_zone when execute the row in the furture by another thread.
The problem is that select queries executed concurrently with
a concurrent insert on a MyISAM table could be cached if the
select started after the query cache invalidation but before
the unlock of tables performed by the concurrent insert. This
race could happen because the concurrent insert was failing
to prevent cache of select queries happening at the same time.
The solution is to add a 'uncacheable' status flag to signal
that a concurrent insert is being performed on the table and
that queries executing at the same time shouldn't cache the
results.
mysql-test/r/query_cache_debug.result:
Add test case result for Bug#41098
mysql-test/t/disabled.def:
Re-enable test case.
mysql-test/t/query_cache_debug.test:
Add test case for Bug#41098
sql/sql_cache.cc:
Debug sync point for regression testing purposes.
sql/sql_insert.cc:
Remove meaningless query cache invalidate. There is already
a preceding invalidate for queries that started before the
concurrent insert.
storage/myisam/ha_myisam.cc:
Check for a active concurrent insert.
storage/myisam/mi_locking.c:
Signal the start of a concurrent insert. Flag is zeroed once
the state is updated back.
storage/myisam/myisamdef.h:
Add flag to signal a active concurrent insert.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
There were so many changes into mtr (this is the new mtr coming) that I rather
copied mtr from 6.0-main here (at least this one knows how to run Maria tests).
I also fixed suite/maria tests to be accepted by the new mtr.
mysys/thr_mutex.c:
adding DBUG_PRINT here, so that we can locate where the warning is issued.
- Remove bothersome warning messages. This change focuses on the warnings
that are covered by the ignore file: support-files/compiler_warnings.supp.
- Strings are guaranteed to be max uint in length
upgrading lock, even with low_priority_updates
The problem is that there is no mechanism to control whether a
delayed insert takes a high or low priority lock on a table.
The solution is to modify the delayed insert thread ("handler")
to take into account the global value of low_priority_updates
when taking table locks. The value of low_priority_updates is
retrieved when the insert delayed thread is created and will
remain the same for the duration of the thread.
include/thr_lock.h:
Update prototype.
mysql-test/r/delayed.result:
Add test case result for Bug#40536
mysql-test/t/delayed.test:
Add test case for Bug#40536
mysys/thr_lock.c:
Add function parameter which specifies the write lock type.
sql/sql_insert.cc:
Take a low priority write lock if global value of low_priority_updates
was ON when the thread was created.
- Added braces around expressions with &&, ||, & and |
- Added empty line before ; for empty while and for loops
- Added () around if with assignments
- Removed const before function returning simple type
Changed BUILD scripts to not build with NDB
BUILD/SETUP.sh:
By default, don't build ndb with --max in Maria tree.
NDB is not kept up to date anyway in 5.1
client/mysql.cc:
Added braces around && to get rid of compiler warnings
sql/event_db_repository.cc:
Added braces around && to get rid of compiler warnings
sql/events.cc:
Added braces around && to get rid of compiler warnings
sql/field.cc:
Added braces around && to get rid of compiler warnings
Fixed for loops
sql/field.h:
Added braces around & to get rid of compiler warnings
sql/field_conv.cc:
Added braces around && to get rid of compiler warnings
Fixed bug when copying between DATETIME fields and strict dates are used
Removed not needeed else
sql/gstream.cc:
Added braces around && to get rid of compiler warnings
sql/ha_ndbcluster.cc:
Added braces around && to get rid of compiler warnings
Added {} to get rid of compiler warnings
sql/handler.cc:
Added braces around && to get rid of compiler warnings
sql/item.cc:
Added braces around && to get rid of compiler warnings
sql/item_cmpfunc.cc:
Added braces around && to get rid of compiler warnings
Removed some not needed space
sql/item_func.cc:
Added braces around && to get rid of compiler warnings
sql/item_strfunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_subselect.cc:
Added braces around && to get rid of compiler warnings
sql/item_sum.cc:
Added braces around && to get rid of compiler warnings
sql/item_timefunc.cc:
Added braces around && to get rid of compiler warnings
sql/item_xmlfunc.cc:
Added empty line before ; for empty while and for loops
sql/log.cc:
Added braces around && to get rid of compiler warnings
sql/log_event.cc:
Added braces around && to get rid of compiler warnings
Removed not needed else
sql/log_event_old.cc:
Added braces around && to get rid of compiler warnings
sql/opt_range.cc:
Added braces around && to get rid of compiler warnings
sql/opt_sum.cc:
Added braces around && to get rid of compiler warnings
sql/set_var.cc:
Added empty line before ; for empty while and for loops
Added () around if with assignments
sql/slave.cc:
Added braces around && to get rid of compiler warnings
Added empty line before ; for empty while and for loops
sql/spatial.h:
Added braces around && to get rid of compiler warnings
sql/sql_acl.cc:
Added braces around && to get rid of compiler warnings
sql/sql_analyse.cc:
Added empty line before ; for empty while and for loops
sql/sql_base.cc:
Added braces around && to get rid of compiler warnings
sql/sql_connect.cc:
Added braces around && to get rid of compiler warnings
sql/sql_db.cc:
Added braces around && to get rid of compiler warnings
sql/sql_delete.cc:
Added braces around && to get rid of compiler warnings
sql/sql_help.cc:
Added empty line before ; for empty while and for loops
sql/sql_insert.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
sql/sql_lex.cc:
Cast char array references to uchar; Fixed wrong array referencing when using characters > ASCII 128 in SQL statments
Added empty line before ; for empty while and for loops
Trivial indent fixes
Added braces around && to get rid of compiler warnings
sql/sql_load.cc:
Added braces around && to get rid of compiler warnings
sql/sql_parse.cc:
Added braces around && to get rid of compiler warnings
sql/sql_partition.cc:
Added braces around && to get rid of compiler warnings
sql/sql_plugin.cc:
Fixed bug in detecing if option variable should be readonly
Added empty line before ; for empty while and for loops
sql/sql_prepare.cc:
Added braces around && to get rid of compiler warnings
sql/sql_select.cc:
Added braces around && to get rid of compiler warnings
Added () around if with assignments
Added empty line before ; for empty while and for loops
sql/sql_show.cc:
Added braces around && to get rid of compiler warnings
sql/sql_table.cc:
Added braces around && to get rid of compiler warnings
sql/sql_trigger.cc:
Added braces around && to get rid of compiler warnings
sql/sql_update.cc:
Added braces around && to get rid of compiler warnings
sql/sql_yacc.yy:
Added braces around && to get rid of compiler warnings
sql/table.cc:
Added braces around && to get rid of compiler warnings
sql/table.h:
Added braces around && to get rid of compiler warnings
sql/time.cc:
Added braces around && to get rid of compiler warnings
sql/tztime.cc:
Added braces around && to get rid of compiler warnings
sql/uniques.cc:
Added braces around && to get rid of compiler warnings
storage/federated/ha_federated.cc:
Fixed bug in testing of variable to ha_info() (Not critical)
storage/heap/ha_heap.cc:
Added braces around && to get rid of compiler warnings
storage/maria/ha_maria.cc:
Fixed bug: Mark that maria_log_dir_path is readonly
Added braces around && to get rid of compiler warnings
storage/ndb/include/ndbapi/NdbEventOperation.hpp:
Removed const before function returning simple type
storage/ndb/include/ndbapi/NdbOperation.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/Ndb.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/NdbEventOperation.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.cpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbEventOperationImpl.hpp:
Removed const before function returning simple type
storage/ndb/src/ndbapi/NdbRecAttr.cpp:
Added empty line before ; for empty while and for loops
storage/ndb/src/ndbapi/TransporterFacade.hpp:
Added braces around && to get rid of compiler warnings
sql/sql_insert.cc:
Removed DBUG_ASSERT() that is triggered by deadlock-innodb test
storage/maria/ma_loghandler.c:
Removed compiler warnings
storage/maria/trnman_public.h:
Fixed wrong code from last push
Added DBUG_ASSERT() to unlikely error senario
Don't use errno == 0 in maria_create() / myisam_create()
sql/sql_insert.cc:
Added DBUG_ASSERT() for case that should never happen in real life
Added my_error() to avoid assert if mysql_lock() or postlock() doesn't call my_error()
storage/maria/ha_maria.cc:
Log queries to maria_log if compiled with EXTRA_DEBUG
storage/maria/ma_create.c:
Don't use errno == 0
storage/maria/ma_loghandler.c:
Added logging of debug info to maria_log
storage/maria/ma_loghandler.h:
Added logging of debug info to maria_log
storage/maria/ma_recovery.c:
Added printing of debug info from maria_log
storage/maria/trnman.c:
Added functions to read/store state in TRN
storage/maria/trnman.h:
Added functions to read/store state in TRN
storage/maria/trnman_public.h:
Added state in TRN to remmeber if we have already logged the query
storage/myisam/mi_create.c:
Don't use errno == 0
Bug #41962 Maria: view-related test failures (insert, view, maria, trigger tests)
Added error handling for wrong update of view.
See Bug #41760 Inserting into multiple-table views is not working
mysql-test/r/delayed.result:
Fixed test as we are now testing values before fields.
Added new tests to test all error combinations
mysql-test/suite/maria/r/maria.result:
Added error handling for not supported update of view.
mysql-test/suite/maria/t/maria.test:
Added error handling for not supported update of view.
mysql-test/t/delayed.test:
Fixed test as we are now testing values before fields.
Added new tests to test all error combinations
sql/sql_base.cc:
Fixed warning from valgrind
sql/sql_insert.cc:
Don't test from which table values are in case of INSERT ... SELECT
Run fix_fields() in values before we do it on fields.
This is needed becasue check_view_single_update() are accessing values.
storage/maria/ma_blockrec.c:
Don't call pagecache_delete_pages() if no pages to delete.
This fixes a DBUG_ASSERT() error in maria_test_recovery
Added code to detect and give error when doing an insert into a view where we accessed fields in a not yet read table
Disabled test in subselect.test as the CHECK_OPTION for views doesn't work for insert.
This needs to be fixed properly later.
The problem with views are described in Bug #41760 Inserting into multiple-table views is not working
mysql-test/r/insert.result:
Fixed wrong usage of insert into view.
mysql-test/r/subselect.result:
Disabled wrong test (temporary)
mysql-test/suite/maria/r/maria.result:
Added test of size of table
mysql-test/suite/maria/t/maria.test:
Added test of size of table
mysql-test/t/insert.test:
Fixed wrong usage of insert into view
The bug is that during insert/update we currently don't read any of the referenced tables of the view.
This means that we can't get a value from another table to use as part of the update.
mysql-test/t/subselect.test:
Disabled not working test until someone has time to fix insert into view properly
Here we where refering to last used value in t2, which is wrong.
sql/sql_insert.cc:
Detect if we are trying to update one table in a view based on value in another, not yet read, table.
This fixes the problem discovered in insert.test
storage/maria/ma_blockrec.c:
Don't ignore not critical changes to the last page in the table.
We need to write the last page as otherwise we can during aborting of a row with a duplicate key get
state.data_file_length and the real length of file out of sync
storage/maria/ma_check.c:
Flush the page cache even if we got an error during zerofill.
(This fixes a call to assert() in case of a too short data file)
storage/maria/ma_pagecache.c:
Mark page as read when we do a write of a full page.
This fixes a bug when we got an error during read and then used direct write to page to update it
storage/maria/ma_state.c:
Restore info->lock.type after call to maria_versioning.
Fixed crash in maria_recover.test
storage/maria/maria_read_log.c:
Don't write thread id in debug log. (Not needed as maria_read_log is a single treaded program)
This writes a warning on stderr if one uses mutex in different order,
like if one in one case would lock mutex in the order A,B and in another case
would lock mutex in the order B,A
This is inspired by and loosely based on the LOCKDEP patch by Jonas
Wrong mutex order is either fixed or mutex are marked with MYF_NO_DEADLOCK_DETECTION
if used inconsistently (need to be fixed by server team)
KNOWN_BUGS.txt:
Added information that one need to dump and restore Maria tables
include/hash.h:
Added prototype function for walking over all elements in a hash
include/my_pthread.h:
Added my_pthread_mutex_init() and my_pthread_mutex_lock(); These should be used if one wants to disable mutex order checking.
Changed names of the nonposix mutex_init functions to not conflict with my_phread_mutex_init()
Added and extended structures for mutex deadlock detection.
New arguments to sage_mutex_init() and safe_mutex_lock() to allow one to disable mutex order checking.
Added variable 'safe_mutex_deadlock_detector' to enable/disable deadlock detection for all pthread_mutex_init()
mysys/Makefile.am:
Added cleaning of test files
Added test_thr_mutex
mysys/hash.c:
Added hash_iterate() to iterate over all elements in a hash
More comments
mysys/my_init.c:
Added calls to destory all mutex uses by mysys()
Added waiting for threads to end before calling TERMINATE() to list not freed memory
mysys/my_pthread.c:
Changed names to free my_pthread_mutex_init() for mutex-lock-order-checking
mysys/my_sleep.c:
Fixed too long wait if using 1000000L as argument
mysys/my_thr_init.c:
Mark THR_LOCK_threads and THR_LOCK_malloc to not have mutex deadlock detection.
(We can't have it enabled for this as these are internal mutex used by the detector
Call my_thread_init() early as we need thread specific variables enabled for the following pthread_mutex_init()
Move code to wait for threads to end to my_wait_for_other_threads_to_die()
Don't destroy mutex and conditions unless all threads have died
Added my_thread_destroy_mutex() to destroy all mutex used by the mysys thread system
Name the thread specific mutex as "mysys_var->mutex"
Added my_thread_var_mutex_in_use() to return pointer to mutex in use or 0 if thread variables are not initialized
mysys/mysys_priv.h:
Added prototypes for functions used internally with mutex-wrong-usage detection
mysys/thr_mutex.c:
Added runtime detection of mutex used in conflicting order
See WL#3262 or test_thr_mutex.c for examples
The base idea is for each mutex have two hashes:
- mutex->locked_mutex points to all mutex used after this one
- mutex->used_mutex points to all mutex which has this mutex in it's mutex->locked_mutex
There is a wrong mutex order if any mutex currently locked before this mutex is in the mutex->locked_mutex hash
sql/event_queue.cc:
Mark mutex used inconsistently (need to be fixed by server team)
sql/event_scheduler.cc:
Declare the right order to take the mutex
sql/events.cc:
Mark mutex used inconsistently (need to be fixed by server team)
sql/ha_ndbcluster_binlog.cc:
Mark mutex used inconsistently (need to be fixed by server team)
sql/log.cc:
Mark mutex used inconsistently (need to be fixed by server team)
sql/mysqld.cc:
Use pthread_mutex_trylock instead of pthread_mutex_unlock() when sending kill signal to thread
This is needed to avoid wrong mutex order as normally one takes 'current_mutex' before mysys_var->mutex.
Added call to free sp cache.
Add destruction of LOCK_server_started and COND_server_started.
Added register_mutex_order() function to register in which order mutex should be taken
(to initiailize mutex_deadlock_detector).
Added option to turn off safe_mutex_deadlock_detector
sql/protocol.cc:
Fixed wrong argument to DBUG_PRINT (found by valgrind)
sql/rpl_mi.cc:
Mark mutex used inconsistently (need to be fixed by server team)
sql/set_var.cc:
Remove wrong locking of LOCK_global_system_variables when reading and setting log variables
(would cause inconsistent mutex order).
Update global variables outside of logger.unlock() as LOCK_global_system_variables has to be taken before logger locks
Reviewed by gluh
sql/sp_cache.cc:
Added function to destroy mutex used by sp cache
sql/sp_cache.h:
Added function to destroy mutex used by sp cache
sql/sql_class.cc:
Use pthread_mutex_trylock instead of pthread_mutex_unlock() when sending kill signal to thread
This is needed to avoid wrong mutex order as normally one takes 'current_mutex' before mysys_var->mutex.
Register order in which LOCK_delete and mysys_var->mutex is taken
sql/sql_insert.cc:
Give a name for Delayed_insert::mutex
Mark mutex used inconsistently (need to be fixed by server team)
Move closing of tables outside of di->mutex (to avoid wrong mutex order)
sql/sql_show.cc:
Don't keep LOCK_global_system_variables locked over value->show_type() as this leads to wrong mutex order
storage/innobase/handler/ha_innodb.cc:
Disable safe_muted_deadlock_detector for innobase intern mutex (to speed up page cache initialization)
storage/maria/ha_maria.cc:
Added flag to ha_maria::info() to signal if we need to lock table share or not.
This is needed to avoid locking mutex in wrong order
storage/maria/ha_maria.h:
Added flag to ha_maria::info() to signal if we need to lock table share or not.
storage/maria/ma_close.c:
Destroy key_del_lock
Simplify freeing ftparser_param
storage/maria/ma_key.c:
Better comment
storage/maria/ma_loghandler.c:
Mark mutex used inconsistently (need to be fixed by sanja)
storage/maria/ma_state.c:
More comments
storage/maria/ma_test1.c:
Ensure that safe_mutex_deadlock_detector is always on (should be, this is just for safety)
storage/maria/ma_test2.c:
Ensure that safe_mutex_deadlock_detector is always on (should be, this is just for safety)
If delayed insert fails to upgrade the lock it was not
freeing the temporary memory storage used to keep
newly constructed blob values in memory.
Fixed by iterating over the remaining rows in the delayed
insert rowset and freeing the blob storage for each row.
No test suite because it involves concurrent delayed inserts
on a table and cannot easily be made deterministic.
Added a correct valgrind suppression for Fedora 9.
mysql-test/valgrind.supp:
Added a vagrind suppression for Fedora 9
sql/sql_insert.cc:
Bug #38693: free the blobs temp storage on error.
The failure was caused by executing a CREATE-SELECT statement that creates a
table in another database than the current one. In row-based logging, the
CREATE statement was written to the binary log without the database, hence
creating the table in the wrong database, causing the following inserts to
fail since the table didn't exist in the given database.
Fixed the bug by adding a parameter to store_create_info() that will make
the function print the database name before the table name and used that
in the calls that write the CREATE statement to the binary log. The database
name is only printed if it is different than the currently selected database.
The output of SHOW CREATE TABLE has not changed and is still printed without
the database name.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Added test to check that CREATE-SELECT into another database than the
current one replicates.
sql/sql_insert.cc:
Adding parameter to calls to store_create_info().
sql/sql_show.cc:
Adding parameter to calls to store_create_info().
Extending store_create_info() with parameter 'show_database' that will cause
the database to be written before the table name.
sql/sql_show.h:
Adding parameter to call to store_create_info() to tell if the database should be shown or not.
sql/sql_table.cc:
Adding parameter to calls to store_create_info().
Concurrent inserts produce valgrind error messages.
The reason is that the query cache is invalidated after the target table object
is closed.
Since the delayed insert thread already takes care of invalidating the query
cache there is no need to try to synchronize an extra cache invalidation call.
The fix is to remove the query_cache_invalidate3 call altogether.
sql/sql_insert.cc:
When end_delayed_insert is called, the table_list items will be invalidated
by the concurrent insert thread. Further more there is no need to call
query_cache_invalidate here since the delayed insert thread takes care of
this already.
The bug was that prepared statements didn't downgrade TL_WRITE_CONCURRENT properly
mysql-test/r/maria.result:
Added test case
mysql-test/t/maria.test:
Added test case
sql/mysql_priv.h:
Make upgrade_lock_type() global
sql/sql_base.cc:
Fixed indentation
sql/sql_insert.cc:
Make upgrade_lock_type() global
sql/sql_prepare.cc:
Call upgrade_lock_type_for_insert() to get right lock to use
sql/sql_view.cc:
Indentation fix
Fix the write_record function to record auto increment
values in a consistent way.
mysql-test/r/auto_increment.result:
Updated the test result file with the output of the
new test case added to verify this bug.
mysql-test/t/auto_increment.test:
Added a new test case to verify this bug.
sql/sql_insert.cc:
The algorithm for the write_record function
in sql_insert.cc is (more emphasis given to
the parts that deal with the autogenerated values)
1) If a write fails
1.1) save the autogenerated value to avoid
thd->insert_id_for_cur_row to become 0.
1.2) <logic to handle INSERT ON DUPLICATE KEY
UPDATE and REPLACE>
2) record the first successful insert id.
explanation of the failure
--------------------------
As long as 1.1) was executed 2) worked fine.
1.1) was always executed when REPLACE worked
with the last row update optimization, but
in cases where 1.1) was not executed 2)
would fail and would result in the autogenerated
value not being saved.
solution
--------
repeat a check for thd->insert_id_for_cur_row
being zero similar to 1.1) before 2) and ensure
that the correct value is saved.
If a delayed insert thread was aborted by a concurrent 'truncate table'
statement, then the diagnostic area would fail with an assert in a debug build
because no actual error message was pushed on the stack despite a thread
being killed.
This patch adds an error message to the stack.
sql/sql_insert.cc:
* Changed sql_print_error() to my_error() to avoid assertion in the DA
* Added assertion in "should never happen" branch.
in open_table()
Problem: repeating "CREATE... ( AUTOINCREMENT) ... SELECT" may lead to
an assertion failure.
Fix: reset table->auto_increment_field_not_null after each record
writing.
mysql-test/r/create.result:
Fix for bug#38821: Assert table->auto_increment_field_not_null failed
in open_table()
- test result.
mysql-test/t/create.test:
Fix for bug#38821: Assert table->auto_increment_field_not_null failed
in open_table()
- test case.
sql/sql_insert.cc:
Fix for bug#38821: Assert table->auto_increment_field_not_null failed
in open_table()
- reset table->auto_increment_field_not_null after writing a record
for "{CREATE, INSERT}..SELECT".
The assert is about binlogging must have been activated, but it was
not actually according to the reported how-to-repeat instuctions.
Analysis revealed that binlog_start_trans_and_stmt() was called
without prior testing if binlogging is ON.
Fixed with avoing entering binlog_start_trans_and_stmt() if binlog is
not activated.
mysql-test/r/skip_log_bin.result:
new results.
mysql-test/t/skip_log_bin-master.opt:
the option to deactivate binlogging.
mysql-test/t/skip_log_bin.test:
regression test for the bug.
sql/sql_insert.cc:
avoing entering binlog_start_trans_and_stmt() if binlog is not activated.
In order to handle CHAR() fields, 8 bits were reserved for
the size of the CHAR field. However, instead of denoting the
number of characters in the field, field_length was used which
denotes the number of bytes in the field.
Since UTF-8 fields can have three bytes per character (and
has been extended to have four bytes per character in 6.0),
an extra two bits have been encoded in the field metadata
work for fields of type Field_string (i.e., CHAR fields).
Since the metadata word is filled, the extra bits have been
encoded in the upper 4 bits of the real type (the most
significant byte of the metadata word) by computing the
bitwise xor of the extra two bits. Since the upper 4 bits
of the real type always is 1111 for Field_string, this
means that for fields of length <256, the encoding is
identical to the encoding used in pre-5.1.26 servers, but
for lengths of 256 or more, an unrecognized type is formed,
causing an old slave (that does not handle lengths of 256
or more) to stop.
mysql-test/extra/rpl_tests/rpl_row_basic.test:
Adding test cases for replicating UTF-8 fields of lengths
of 256 or more (bytes).
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Result file change.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Adding tests to trigger check that an error is generated when replicating from a
5.1.25 server for tables with a CHAR(128) but not when replicating a table with a
CHAR(63). Although the bug indicates that the limit is 83, we elected to use CHAR(63)
since 6.0 uses 4-byte UTF-8, and anything exceeding 63 would then cause the test to fail
when the patch is merged to 6.0.
mysql-test/suite/bugs/combinations:
Adding combinations file to run all bug reports in all binlog modes (where
applicable).
mysql-test/suite/bugs/r/rpl_bug37426.result:
Result file change.
mysql-test/suite/bugs/t/rpl_bug37426.test:
Added test for reported bug.
mysql-test/suite/rpl/r/rpl_row_basic_2myisam.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_basic_3innodb.result:
Result file change.
sql/field.cc:
Encoding an extra two bits in the most significant nibble (4 bits)
of the metadata word. Adding assertions to ensure that no attempt
is made to use lengths longer than supported.
Extending compatible_field_size() function with an extra parameter
holding a Relay_log_instace for error reporting.
Field_string::compatible_field_size() now reports an error if field
size for a CHAR is >255.
sql/field.h:
Field length is now computed from most significant 4 bits
of metadata word, or is equal to the row pack length if
there is no metadata.
Extending compatible_field_size() function with an extra parameter
holding a Relay_log_instace for error reporting.
sql/rpl_utility.cc:
Adding relay log parameter to compatible_field_size().
Minor refactoring to eliminate duplicate code.
sql/slave.cc:
Extending rpl_master_has_bug() with a single-argument predicate function and
a parameter to the predicate function. The predicate function can be used to
test for extra conditions for the bug before writing an error message.
sql/slave.h:
Extending rpl_master_has_bug() with a single-argument predicate function and
a parameter to the predicate function. The predicate function can be used to
test for extra conditions for the bug before writing an error message.
Also removing gratuitous default argument.
sql/sql_insert.cc:
Changing calls to rpl_master_has_bug() to adapt to changed signature.
mysql-test/r/maria.result:
result; before the bugfix it would be "TRANSACTIONAL=1 transactional=1"
mysql-test/t/maria.test:
test for BUG#36104 "INFORMATION_SCHEMA.TABLES shows TRANSACTIONAL=1 twice in CREATE_OPTIONS"
sql-bench/example:
doblewrite->doublewrite
sql/mysqld.cc:
fix of a wrong 5.1->maria merge of the past
sql/sql_insert.cc:
removing my old idea of disabling transactionality in CREATE SELECT:
1) it caused bugs because re-enabling (ha_enable_transaction()) causes implicit commit, so in complex cases
like "CREATE SELECT some_func())", where some_func() would want to insert two rows in another table, and fail on the second row, the implicit commit would commit the inserted row, while it should roll back.
2) it's not needed anymore, because CREATE SELECT uses bulk insert, and Maria has transactionality disabled by
bulk insert.
sql/sql_show.cc:
This was duplicate code, causing BUG#36104 "INFORMATION_SCHEMA.TABLES shows TRANSACTIONAL=1 twice in CREATE_OPTIONS"
Problem was an unclear error message since it could suggest that
MyISAM did not support INSERT DELAYED.
Changed the error message to say that DELAYED is not supported by the
table, instead of the table's storage engine.
The confusion is that a partitioned table is in somewhat sense using
the partitioning storage engine, which in turn uses the ordinary
storage engine. By saying that the table does not support DELAYED we
do not give any extra informantion about the storage engine or if it
is partitioned.
mysql-test/r/innodb-replace.result:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
changed error message
mysql-test/t/innodb-replace.test:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
changed error message
mysql-test/t/merge.test:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
changed error message
mysql-test/t/partition_hash.test:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
changed error message
sql/share/errmsg.txt:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
added error message for tables not supporting DELAYED
sql/sql_insert.cc:
Bug#31210: INSERT DELAYED crashes server when used on partitioned tables
changed error message
into mysql.com:/home/my/mysql-maria
mysql-test/r/maria.result:
Auto merged
mysql-test/suite/ndb/r/ndb_auto_increment.result:
Auto merged
mysql-test/t/maria.test:
Auto merged
mysys/hash.c:
Auto merged
mysys/thr_lock.c:
Auto merged
sql/field.cc:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_ndbcluster.h:
Auto merged
sql/ha_partition.cc:
Auto merged
sql/ha_partition.h:
Auto merged
sql/handler.cc:
Auto merged
sql/handler.h:
Auto merged
sql/log_event.cc:
Auto merged
sql/log_event_old.cc:
Auto merged
sql/mysqld.cc:
Auto merged
sql/protocol.cc:
Auto merged
sql/sql_load.cc:
Auto merged
sql/sql_parse.cc:
Auto merged
sql/sql_select.cc:
Auto merged
sql/sql_table.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
storage/csv/ha_tina.cc:
Auto merged
storage/federated/ha_federated.cc:
Auto merged
storage/maria/Makefile.am:
Auto merged
storage/maria/ma_check.c:
Auto merged
storage/maria/ma_control_file.c:
Auto merged
storage/maria/ma_delete_all.c:
Auto merged
storage/maria/ma_dynrec.c:
Auto merged
storage/maria/ma_init.c:
Auto merged
storage/maria/ma_key_recover.c:
Auto merged
storage/maria/ma_open.c:
Auto merged
storage/maria/ma_page.c:
Auto merged
storage/maria/ma_range.c:
Auto merged
storage/maria/ma_recovery.c:
Auto merged
storage/maria/ma_test1.c:
Auto merged
storage/maria/maria_read_log.c:
Auto merged
storage/maria/unittest/ma_test_all-t:
Auto merged
storage/maria/unittest/ma_test_loghandler_multigroup-t.c:
Auto merged
storage/maria/unittest/ma_test_recovery.pl:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/myisamdef.h:
Auto merged
include/my_base.h:
Manual merge where error code are kept same as in 5.1
mysys/my_handler.c:
No changes
sql/item.cc:
Manual merge
sql/sql_class.cc:
Manual merge
sql/sql_insert.cc:
Manual merge
storage/maria/ha_maria.cc:
Manual merge
storage/maria/ma_blockrec.c:
Manual merge
storage/maria/ma_delete.c:
Manual merge
storage/maria/ma_write.c:
Manual merge
Added argument to maria_end_bulk_insert() to know if the table will be deleted after the operation
Fixed wrong call to strmake
Don't call bulk insert in case of inserting only one row (speed optimization as starting/stopping bulk insert
Allow storing year 2155 in year field
When running with purify/valgrind avoid copying structures over themself
Added hook 'trnnam_end_trans_hook' that is called when transaction ends
Added trn->used_tables that is used to an entry for all tables used by transaction
Fixed that ndb doesn't crash on duplicate key error when start_bulk_insert/end_bulk_insert are not called
include/maria.h:
Added argument to maria_end_bulk_insert() to know if the table will be deleted after the operation
include/my_tree.h:
Added macro 'reset_free_element()' to be able to ignore calls to the external free function.
Is used to optimize end-bulk-insert in case of failures, in which case we don't want write the remaining keys in the tree
mysql-test/install_test_db.sh:
Upgrade to new mysql_install_db options
mysql-test/r/maria-mvcc.result:
New tests
mysql-test/r/maria.result:
New tests
mysql-test/suite/ndb/r/ndb_auto_increment.result:
Fixed error message now when bulk insert is not always called
mysql-test/suite/ndb/t/ndb_auto_increment.test:
Fixed error message now when bulk insert is not always called
mysql-test/t/maria-mvcc.test:
Added testing of versioning of count(*)
mysql-test/t/maria-page-checksum.test:
Added comment
mysql-test/t/maria.test:
More tests
mysys/hash.c:
Code style change
sql/field.cc:
Allow storing year 2155 in year field
sql/ha_ndbcluster.cc:
Added new argument to end_bulk_insert() to signal if the bulk insert should ignored
sql/ha_ndbcluster.h:
Added new argument to end_bulk_insert() to signal if the bulk insert should ignored
sql/ha_partition.cc:
Added new argument to end_bulk_insert() to signal if the bulk insert should ignored
sql/ha_partition.h:
Added new argument to end_bulk_insert() to signal if the bulk insert should ignored
sql/handler.cc:
Don't call get_dup_key() if there is no table object. This can happen if the handler generates a duplicate key error on commit
sql/handler.h:
Added new argument to end_bulk_insert() to signal if the bulk insert should ignored (ie, the table will be deleted)
sql/item.cc:
Style fix
Removed compiler warning
sql/log_event.cc:
Added new argument to ha_end_bulk_insert()
sql/log_event_old.cc:
Added new argument to ha_end_bulk_insert()
sql/mysqld.cc:
Removed compiler warning
sql/protocol.cc:
Added DBUG
sql/sql_class.cc:
Added DBUG
Fixed wrong call to strmake
sql/sql_insert.cc:
Don't call bulk insert in case of inserting only one row (speed optimization as starting/stopping bulk insert involves a lot of if's)
Added new argument to ha_end_bulk_insert()
sql/sql_load.cc:
Added new argument to ha_end_bulk_insert()
sql/sql_parse.cc:
Style fixes
Avoid goto in common senario
sql/sql_select.cc:
When running with purify/valgrind avoid copying structures over themself. This is not a real bug in itself, but it's a waste of cycles and causes valgrind warnings
sql/sql_select.h:
Avoid copying structures over themself. This is not a real bug in itself, but it's a waste of cycles and causes valgrind warnings
sql/sql_table.cc:
Call HA_EXTRA_PREPARE_FOR_DROP if table created by ALTER TABLE is going to be dropped
Added new argument to ha_end_bulk_insert()
storage/archive/ha_archive.cc:
Added new argument to end_bulk_insert()
storage/archive/ha_archive.h:
Added new argument to end_bulk_insert()
storage/federated/ha_federated.cc:
Added new argument to end_bulk_insert()
storage/federated/ha_federated.h:
Added new argument to end_bulk_insert()
storage/maria/Makefile.am:
Added ma_state.c and ma_state.h
storage/maria/ha_maria.cc:
Versioning of count(*) and checksum
- share->state.state is now assumed to be correct, not handler->state
- Call _ma_setup_live_state() in external lock to get count(*)/checksum versioning. In case of
not versioned and not concurrent insertable table, file->s->state.state contains the correct state information
Other things:
- file->s -> share
- Added DBUG_ASSERT() for unlikely case
- Optimized end_bulk_insert() to not write anything if table is going to be deleted (as in failed alter table)
- Indentation changes in external_lock becasue of removed 'goto' caused a big conflict even if very little was changed
storage/maria/ha_maria.h:
New argument to end_bulk_insert()
storage/maria/ma_blockrec.c:
Update for versioning of count(*) and checksum
Keep share->state.state.data_file_length up to date (not info->state->data_file_length)
Moved _ma_block_xxxx_status() and maria_versioning() functions to ma_state.c
storage/maria/ma_check.c:
Update and use share->state.state instead of info->state
info->s to share
Update info->state at end of repair
Call _ma_reset_state() to update share->state_history at end of repair
storage/maria/ma_checkpoint.c:
Call _ma_remove_not_visible_states() on checkpoint to clean up not visible state history from tables
storage/maria/ma_close.c:
Remember state history for running transaction even if table is closed
storage/maria/ma_commit.c:
Ensure we always call trnman_commit_trn() even if other calls fails. If we don't do that, the translog and state structures will not be freed
storage/maria/ma_delete.c:
Versioning of count(*) and checksum:
- Always update info->state->checksum and info->state->records
storage/maria/ma_delete_all.c:
Versioning of count(*) and checksum:
- Ensure that share->state.state is updated, as here is where we store the primary information
storage/maria/ma_dynrec.c:
Use lock_key_trees instead of concurrent_insert to check if trees should be locked.
This allows us to lock trees both for concurrent_insert and for index versioning.
storage/maria/ma_extra.c:
Versioning of count(*) and checksum:
- Use share->state.state instead of info->state
- share->concurrent_insert -> share->non_transactional_concurrent_insert
- Don't update share->state.state from info->state if transactional table
Optimization:
- Don't flush io_cache or bitmap if we are using FLUSH_IGNORE_CHANGED
storage/maria/ma_info.c:
Get most state information from current state
storage/maria/ma_init.c:
Add hash table and free function to store states for closed tables
Install hook for transaction commit/rollback to update history state
storage/maria/ma_key_recover.c:
Versioning of count(*) and checksum:
- Use share->state.state instead of info->state
storage/maria/ma_locking.c:
Versioning of count(*) and checksum:
- Call virtual functions (if exists) to restore/update status
- Move _ma_xxx_status() functions to ma_state.c
info->s -> share
storage/maria/ma_open.c:
Versioning of count(*) and checksum:
- For not transactional tables, set info->state to point to new allocated state structure.
- Initialize new info->state_start variable that points to state at start of transaction
- Copy old history states from hash table (maria_stored_states) first time the table is opened
- Split flag share->concurrent_insert to non_transactional_concurrent_insert & lock_key_tree
- For now, only enable versioning of tables without keys (to be fixed in soon!)
- Added new virtual function to restore status in maria_lock_database)
More DBUG
storage/maria/ma_page.c:
Versioning of count(*) and checksum:
- Use share->state.state instead of info->state
- Modify share->state.state.key_file_length under share->intern_lock
storage/maria/ma_range.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
info->s -> share
storage/maria/ma_recovery.c:
Versioning of count(*) and checksum:
- Use share->state.state instead of info->state
- Update state information on close and when reenabling logging
storage/maria/ma_rkey.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
storage/maria/ma_rnext.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
storage/maria/ma_rnext_same.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
- Only skip rows based on file length if non_transactional_concurrent_insert is set
storage/maria/ma_rprev.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
storage/maria/ma_rsame.c:
Versioning of count(*) and checksum:
- Lock trees based on share->lock_key_trees
storage/maria/ma_sort.c:
Use share->state.state instead of info->state
Fixed indentation
storage/maria/ma_static.c:
Added maria_stored_state
storage/maria/ma_update.c:
Versioning of count(*) and checksum:
- Always update info->state->checksum and info->state->records
- Remove optimization for index file update as it doesn't work for transactional tables
storage/maria/ma_write.c:
Versioning of count(*) and checksum:
- Always update info->state->checksum and info->state->records
storage/maria/maria_def.h:
Move MARIA_STATUS_INFO to ma_state.h
Changes to MARIA_SHARE:
- Added state_history to store count(*)/checksum states
- Added in_trans as counter if table is used by running transactions
- Split concurrent_insert into lock_key_trees and on_transactional_concurrent_insert.
- Added virtual function lock_restore_status
Changes to MARIA_HA:
- save_state -> state_save
- Added state_start to store state at start of transaction
storage/maria/maria_pack.c:
Versioning of count(*) and checksum:
- Use share->state.state instead of info->state
Indentation fixes
storage/maria/trnman.c:
Added hook 'trnnam_end_trans_hook' that is called when transaction ends
Added trn->used_tables that is used to an entry for all tables used by transaction
More DBUG
Changed return type of trnman_end_trn() to my_bool
Added trnman_get_min_trid() to get minimum trid in use.
Added trnman_exists_active_transactions() to check if there exist a running transaction started between two commit id
storage/maria/trnman.h:
Added 'used_tables'
Moved all pointers into same groups to get better memory alignment
storage/maria/trnman_public.h:
Added prototypes for new functions and variables
Chagned return type of trnman_end_trn() to my_bool
storage/myisam/ha_myisam.cc:
Added argument to end_bulk_insert() if operation should be aborted
storage/myisam/ha_myisam.h:
Added argument to end_bulk_insert() if operation should be aborted
storage/maria/ma_state.c:
Functions to handle state of count(*) and checksum
storage/maria/ma_state.h:
Structures and declarations to handle state of count(*) and checksum
mysql-test/include/varchar.inc:
Manual merge between 5.1 and maria.
Added a comment.
mysql-test/r/maria.result:
Temporary fix.
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge.
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge.
sql/handler.h:
Manual merge + fix.
sql/item.h:
Manual merge + fix.
sql/log.cc:
Manual merge + fix.
sql/sql_insert.cc:
Manual merge + fix. A commit was done when using
create table ... select from for transactional tables
other than maria, when an error occurred and
transaction should have been aborted.
into mysql.com:/home/my/mysql-new
BitKeeper/etc/ignore:
auto-union
BUILD/SETUP.sh:
Auto merged
CMakeLists.txt:
Auto merged
client/get_password.c:
Auto merged
client/mysqldump.c:
Auto merged
client/mysqltest.c:
Auto merged
cmd-line-utils/readline/bind.c:
Auto merged
cmd-line-utils/readline/display.c:
Auto merged
cmd-line-utils/readline/histexpand.c:
Auto merged
cmd-line-utils/readline/history.c:
Auto merged
cmd-line-utils/readline/readline.c:
Auto merged
cmd-line-utils/readline/text.c:
Auto merged
dbug/user.r:
Auto merged
extra/yassl/src/handshake.cpp:
Auto merged
include/config-win.h:
Auto merged
include/m_string.h:
Auto merged
include/my_global.h:
Auto merged
include/my_pthread.h:
Auto merged
include/mysql/plugin.h:
Auto merged
include/mysql_com.h:
Auto merged
include/thr_alarm.h:
Auto merged
libmysql/CMakeLists.txt:
Auto merged
libmysql/Makefile.shared:
Auto merged
libmysql/dll.c:
Auto merged
libmysql/get_password.c:
Auto merged
libmysql/libmysql.c:
Auto merged
libmysqld/Makefile.am:
Auto merged
mysql-test/lib/mtr_cases.pl:
Auto merged
mysql-test/mysql-test-run.pl:
Auto merged
mysql-test/r/alter_table.result:
Auto merged
mysql-test/r/change_user.result:
Auto merged
mysql-test/r/create.result:
Auto merged
mysql-test/r/innodb.result:
Auto merged
mysql-test/r/merge.result:
Auto merged
mysql-test/r/mix2_myisam.result:
Auto merged
mysql-test/r/mysqldump.result:
Auto merged
mysql-test/r/query_cache.result:
Auto merged
mysql-test/r/subselect.result:
Auto merged
mysql-test/valgrind.supp:
Auto merged
mysql-test/r/view.result:
Auto merged
mysql-test/suite/rpl/r/rpl_events.result:
Auto merged
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Auto merged
mysql-test/t/create.test:
Auto merged
mysql-test/t/mysqldump.test:
Auto merged
mysql-test/t/query_cache.test:
Auto merged
mysql-test/t/subselect.test:
Auto merged
mysql-test/t/variables.test:
Auto merged
mysql-test/t/view.test:
Auto merged
mysys/mf_iocache.c:
Auto merged
mysys/mf_tempfile.c:
Auto merged
mysys/my_atomic.c:
Auto merged
mysys/my_bit.c:
Auto merged
mysys/my_bitmap.c:
Auto merged
mysys/my_compress.c:
Auto merged
mysys/my_create.c:
Auto merged
mysys/my_delete.c:
Auto merged
mysys/my_error.c:
Auto merged
mysys/my_init.c:
Auto merged
mysys/my_open.c:
Auto merged
mysys/my_realloc.c:
Auto merged
mysys/my_rename.c:
Auto merged
mysys/my_symlink.c:
Auto merged
mysys/my_sync.c:
Auto merged
mysys/my_thr_init.c:
Auto merged
mysys/thr_alarm.c:
Auto merged
mysys/thr_lock.c:
Auto merged
scripts/make_binary_distribution.sh:
Auto merged
server-tools/instance-manager/mysql_connection.cc:
Auto merged
sql/CMakeLists.txt:
Auto merged
sql/Makefile.am:
Auto merged
sql/events.cc:
Auto merged
sql/field.cc:
Auto merged
sql/field.h:
Auto merged
sql/filesort.cc:
Auto merged
sql/gen_lex_hash.cc:
Auto merged
sql/ha_ndbcluster.cc:
Auto merged
sql/ha_partition.h:
Auto merged
sql/handler.h:
Auto merged
sql/item.cc:
Auto merged
sql/item.h:
Auto merged
sql/item_cmpfunc.cc:
Auto merged
sql/item_func.cc:
Auto merged
sql/item_func.h:
Auto merged
sql/item_strfunc.cc:
Auto merged
sql/item_strfunc.h:
Auto merged
sql/item_subselect.cc:
Auto merged
sql/lock.cc:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/net_serv.cc:
Auto merged
sql/opt_range.cc:
Auto merged
sql/partition_info.cc:
Auto merged
sql/rpl_injector.cc:
Auto merged
sql/set_var.cc:
Auto merged
sql/slave.cc:
Auto merged
sql/slave.h:
Auto merged
sql/sp_head.cc:
Auto merged
sql/sql_acl.cc:
Auto merged
sql/sql_base.cc:
Auto merged
sql/sql_cache.cc:
Auto merged
sql/sql_class.h:
Auto merged
sql/sql_delete.cc:
Auto merged
sql/sql_load.cc:
Auto merged
sql/sql_plugin.cc:
Auto merged
sql/sql_prepare.cc:
Auto merged
sql/sql_repl.cc:
Auto merged
sql/sql_test.cc:
Auto merged
sql/sql_union.cc:
Auto merged
sql/sql_update.cc:
Auto merged
sql/sql_yacc.yy:
Auto merged
sql/table.cc:
Auto merged
sql/table.h:
Auto merged
sql/unireg.cc:
Auto merged
sql/share/errmsg.txt:
Auto merged
storage/csv/ha_tina.cc:
Auto merged
storage/csv/ha_tina.h:
Auto merged
storage/myisam/CMakeLists.txt:
Auto merged
storage/myisam/ft_boolean_search.c:
Auto merged
storage/myisam/ft_eval.c:
Auto merged
storage/myisam/ft_nlq_search.c:
Auto merged
storage/myisam/ft_parser.c:
Auto merged
storage/myisam/ft_static.c:
Auto merged
storage/myisam/ft_stopwords.c:
Auto merged
storage/myisam/ft_test1.c:
Auto merged
storage/myisam/ft_update.c:
Auto merged
storage/myisam/ha_myisam.cc:
Auto merged
storage/myisam/mi_check.c:
Auto merged
storage/myisam/mi_create.c:
Auto merged
storage/myisam/mi_delete.c:
Auto merged
storage/myisam/mi_delete_all.c:
Auto merged
storage/myisam/mi_dynrec.c:
Auto merged
storage/myisam/mi_key.c:
Auto merged
storage/myisam/mi_packrec.c:
Auto merged
storage/myisam/mi_range.c:
Auto merged
storage/myisam/mi_search.c:
Auto merged
storage/myisam/mi_test1.c:
Auto merged
storage/myisam/mi_test2.c:
Auto merged
storage/myisam/mi_test3.c:
Auto merged
storage/myisam/mi_unique.c:
Auto merged
storage/myisam/mi_write.c:
Auto merged
storage/myisam/myisamchk.c:
Auto merged
storage/myisam/myisamdef.h:
Auto merged
storage/myisam/myisampack.c:
Auto merged
storage/myisam/sort.c:
Auto merged
storage/myisam/sp_test.c:
Auto merged
support-files/mysql.spec.sh:
Auto merged
tests/mysql_client_test.c:
Auto merged
configure.in:
Manual merge
dbug/dbug.c:
Restore to original state in Maria tree
The big diff comes from a wrong pull from 5.0 -> 5.1 after backporting dbug to 5.0 from 5.1
include/Makefile.am:
Manual merge
include/my_atomic.h:
Ignore changes
include/my_base.h:
Manual merge
include/my_dbug.h:
Use orginal my_dbug.h from maria tree
include/my_handler.h:
Manual merge
include/my_sys.h:
Manual merge
include/myisam.h:
Manual merge
mysql-test/lib/mtr_report.pl:
Manual merge
mysql-test/r/myisam.result:
Manual merge
mysql-test/suite/binlog/r/binlog_unsafe.result:
Manual merge
mysql-test/suite/binlog/t/binlog_unsafe.test:
Manual merge
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
Manual merge
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
No changes
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
Manual merge
mysql-test/t/change_user.test:
Manual merge
mysql-test/t/disabled.def:
Manual merge
mysql-test/t/merge.test:
No changes
mysql-test/t/myisam.test:
Manual merge
mysys/Makefile.am:
Manual merge
mysys/array.c:
Manual merge
mysys/mf_keycache.c:
Manual merge
mysys/my_getsystime.c:
Manual merge
mysys/my_handler.c:
Manual merge
mysys/my_pread.c:
Manual merge
mysys/safemalloc.c:
Manual merge
sql/ha_partition.cc:
Manual merge
sql/handler.cc:
Manual merge
sql/lex.h:
Manual merge
sql/mysql_priv.h:
Manual merge
sql/mysqld.cc:
Manual merge
sql/set_var.h:
Manual merge
sql/sql_class.cc:
Manual merge
sql/sql_insert.cc:
Manual merge
sql/sql_parse.cc:
Manual merge
sql/sql_select.cc:
Manual merge
sql/sql_show.cc:
Manual merge
sql/sql_table.cc:
Manual merge
storage/myisam/mi_checksum.c:
No changes
storage/myisam/mi_extra.c:
Manual merge
storage/myisam/mi_open.c:
Manual merge
storage/myisammrg/ha_myisammrg.cc:
Manual merge
strings/strmake.c:
No changes
Among two claimed artifacts the critical one is in that the Table map of
a query following the failing with a duplicate key error CREATE-SELECT is skipped from
instantionating (and thus binlogging). That leads to sending a "chopped" group of the data
row-events without the table map head to the slave.
The slave can not apply the only data row events.
It's not easy to force the slave to react with an error in such a case (the second complaint
on the bug report), because the lack of a table Rows_log_event::do_apply_event the data row event
handler is a common situation which normally designates the event has to be filtered out
basing on the repliation do/ingore rules decision.
Fixed: table map creating and binlogging is restored via deploying the standard cleanup call in
select_create::abort().
No error is reported if by chance the table map was not been binlogged.
Leaving this out to resolve with considering how to combine the do/ingore rules with the situation
when erronoulsy the Table_map is not written to binlog.
mysql-test/suite/rpl/r/rpl_row_create_table.result:
results changed
mysql-test/suite/rpl/t/rpl_row_create_table.test:
regression test for the bug
sql/sql_insert.cc:
adding resetting of thd binlogging state that was missed for the particular case of failing CREATE..SELECT
into mats-laptop.(none):/home/bk/b29020-mysql-5.1-rpl
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Auto merged
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Auto merged
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Auto merged
sql/log.cc:
Auto merged
sql/log_event.cc:
Auto merged
sql/log_event.h:
Auto merged
sql/sql_insert.cc:
Auto merged
The bug allow multiple executing transactions working with non-transactional
to interfere with each others by interleaving the events of different trans-
actions.
Bug is fixed by writing non-transactional events to the transaction cache and
flushing the cache to the binary log at statement commit. To mimic the behavior
of normal statement-based replication, we flush the transaction cache in row-
based mode when there is no committed statements in the transaction cache,
which means we are committing the first one. This means that it will be written
to the binary log as a "mini-transaction" with just the rows for the statement.
Note that the changes here does not take effect when building the server with
HAVE_TRANSACTIONS set to false, but it is not clear if this was possible before
this patch either.
For row-based logging, we also have that when AUTOCOMMIT=1, the code now always
generates a BEGIN/COMMIT pair for single statements, or BEGIN/ROLLBACK pair in the
case of non-transactional changes in a statement that was rolled back. Note that
for the case where changes to a non-transactional table causes a rollback due
to error, the statement will now be logged with a BEGIN/ROLLBACK pair, even
though some changes has been committed to the non-transactional table.
mysql-test/extra/rpl_tests/rpl_row_delayed_ins.test:
Removing SHOW BINLOG EVENTS causing test to be non-deterministic.
mysql-test/r/ctype_cp932_binlog_row.result:
Result change.
mysql-test/suite/binlog/r/binlog_base64_flag.result:
Result change.
mysql-test/suite/binlog/r/binlog_multi_engine.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_ctype_ucs.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_insert_select.result:
Result file change.
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Result file change.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
Result file change.
mysql-test/suite/binlog/t/binlog_base64_flag.test:
Removing table that will be used in test to prevent failing if preceeding
tests forgot to drop the table.
mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_basic_11bugs.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_create_table.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_delayed_ins.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_inexist_tbl.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_log.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_log_innodb.result:
Result file change.
mysql-test/suite/rpl/r/rpl_row_until.result:
Result file change.
mysql-test/suite/rpl/r/rpl_slave_skip.result:
Result file change.
mysql-test/suite/rpl/r/rpl_switch_stm_row_mixed.result:
Result file change.
mysql-test/suite/rpl/r/rpl_truncate_2myisam.result:
Result file change.
mysql-test/suite/rpl/t/rpl_row_create_table.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_row_mysqlbinlog.test:
Binlog position change. Added stop position to mysqlbinlog argments to prevent
extreneous output.
mysql-test/suite/rpl/t/rpl_row_until.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_slave_skip.test:
Binlog position change.
mysql-test/suite/rpl/t/rpl_switch_stm_row_mixed.test:
Removing extreneous SHOW BINLOG EVENTS causing test to be non-deterministic.
mysql-test/suite/rpl_ndb/r/rpl_ndb_log.result:
Result change.
sql/log.cc:
Adding variable at_least_one_stmt to denote that there is at least one
statement committed to the transaction cache (but there might be more).
Removing duplicate checks from binlog_end_trans(). The transaction cache
should always be committed or rolled back when this function is called.
Correcting conditions for binlog_rollback() and binlog_commit() and removing
the previous "invisible commit" in favor of always using explicit commits
in the binary log.
sql/log_event.cc:
Marking table map event to be cached. Removing Muted_query_log_event from code.
sql/log_event.h:
Removing unused class Muted_query_log_event.
sql/sql_insert.cc:
Adding missing call to ha_autocommit_or_rollback() for delayed thread. Marking
CREATE-SELECT statements as transactional, since they don't need to be logged.
