According to logs analysis the Dump thread attempted to read again data which
was already sent. The reason of regressed read turns out in an _my_b_cache_read()
early exit branch which missed to distinguish between total zero size read (e.g
ineffective read when Count argument is zero) from a case when the
requested amount of data is fully read out by sole accessing the cache's
file. In the latter case such then *effective* reading was not
reflected in the cache's state to screw the cache's state.
Fixed with a check introduced of whether the file reading was effective prior to
early exit. When this is the case conduct standard cache state change to
account the actual read size.
Notice the bug can show up also as an error to read binlog event e.g
through BINLOG_GTID_POS() (of MDEV-16886).
extra/mariabackup/fil_cur.cc:361:42: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
extra/mariabackup/fil_cur.cc:376:9: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
sql/handler.cc:6196:45: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
sql/log.cc:1681:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/log.cc:1687:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/wsrep_sst.cc:1388:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
sql/wsrep_sst.cc:232:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
storage/connect/filamdbf.cpp:450:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/filamdbf.cpp:970:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/inihandl.cpp:197:16: warning: address of array 'key->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
storage/innobase/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/buf/buf0buf.cc:5085:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/innobase/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/handler/ha_innodb.cc:18685:7: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
storage/innobase/row/row0mysql.cc:3319:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/row/row0mysql.cc:3327:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/maria/ma_norec.c:35:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_norec.c:42:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_test2.c:1009:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/maria/ma_test2.c:1010:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/mroonga/ha_mroonga.cpp:9189:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
storage/mroonga/vendor/groonga/lib/expr.c:4987:22: warning: comparison of constant -1 with expression of type 'grn_operator' is always false [-Wtautological-constant-out-of-range-compare]
storage/xtradb/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/buf/buf0buf.cc:5047:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/xtradb/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3324:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3332:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:120:35: warning: format specifies type 'unsigned long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:96:35: note: expanded from macro 'INFO_TAIL'
MDEV-7257 made a dump thread to read from binlog concurrently with
writers as long as the read bytes are below a water-mark
(MYSQL_BIN_LOG::binlog_end_pos). However it appeared to be possible a
dump thread reader reach out for bytes past the water mark through a
feature of IO_CACHE that fills in the internal buffer and while doing
so it could read what the reader is not supposed to see (the bytes
above MYSQL_BIN_LOG::binlog_end_pos).
The issue is fixed with constraining the IO_CACHE buffer fill to respect
the watermark.
An added unit test proves reading from file is bound to an external
parameter
passed to {IO_CACHE::end_of_file} cache member.
order with Galera and encrypt-tmp-files=1
Problem:- If trans_cache (IO_CACHE) uses encrypted tmp file
then on next DML server will crash.
Case:-
Lets take a case , we have a table t1 , We try to do 2 inserts in t1
1. A really long insert so that trans_cache has to use temp_file
2. Just a small insert
Analysis:- Actually server crashes from inside of galera
library.
/lib64/libc.so.6(abort+0x175)[0x7fb5ba779dc5]
/usr/lib64/galera/libgalera_smm.so(_ZN6galera3FSMINS_9TrxHandle5State...
mysys/stacktrace.c:247(my_print_stacktrace)[0x7fb5a714940e]
sql/signal_handler.cc:160(handle_fatal_signal)[0x7fb5a715c1bd]
sql/wsrep_hton.cc:257(wsrep_rollback)[0x7fb5bcce923a]
sql/wsrep_hton.cc:268(wsrep_rollback)[0x7fb5bcce9368]
sql/handler.cc:1658(ha_rollback_trans(THD*, bool))[0x7fb5bcd4f41a]
sql/handler.cc:1483(ha_commit_trans(THD*, bool))[0x7fb5bcd4f804]
but actual issue is not in galera but in mariadb, because for 2nd
insert we should never call rollback. We are calling rollback because
log_and_order fails it fails because write_cache fails , It fails
because after reinit_io_cache(trans_cache) , my_b_bytes_in_cache says 0
so we look into tmp_file for data , which is obviously wrong since temp
was used for previous insert and it no longer exist.
wsrep_write_cache_inc() reads the IO_CACHE in a loop, filling it with
my_b_fill() until it returns "0 bytes read". Later
MYSQL_BIN_LOG::write_cache() does the same. wsrep_write_cache_inc()
assumes that reading a zero bytes past EOF leaves the old data in the
cache
Solution:- There is two issue in my_b_encr_read
1st we should never equal read_end to info->buffer. I mean this
does not make sense read_end should always point to end of buffer.
2nd For most of the case(apart from async IO_CACHE) info->pos_in_file
should be equal to info->buffer position wrt to temp file , since
in this case we are not changing info->buffer it should remain
unchanged.
1. unused static inline functions are only removed at -xO4,
otherwise test binaries will depend on various mysys
symbols that they don't use. Link test with libmysys.
2. Sphinx - don't instantiate (explicitly) templates before
they're defined. Or, rather, don't instantiate them explicitly at
all.
3. GIS - don't use anonymous unions and structs.
In fact it was error in decimal library (incorrect processing of buffer overflow) invisible from other server parts because of buffer allocation and precision tests.
--encrypt-binlog and --encrypt-tmp-files used to mean
"encrypt XXX if encryption is available, otherwise don't encrypt",
now they mean "encrypt or fail with an error".
Instead of encrypt(src, dst, key, iv) that encrypts all
data in one go, now we have encrypt_init(key,iv),
encrypt_update(src,dst), and encrypt_finish(dst).
This also causes collateral changes in the internal my_crypt.cc
encryption functions and in the encryption service.
There are wrappers to provide the old all-at-once encryption
functionality. But binlog events are often written piecewise,
they'll need the new api.
- Added MALLOC_LIBRARY variable to hold name of malloc library
- Back ported valgrind related fixes from jemalloc 3.4.1 to the included jemalloc 3.3.1
- Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
- Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
- Show version related variables in mysqld --help
-- Added SHOW_VALUE_IN_HELP marker
Increased back_log to 150 as the original value was a bit too small
CMakeLists.txt:
Added MALLOC_LIBRARY variable to hold name of malloc library
cmake/jemalloc.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
config.h.cmake:
Added MALLOC_LIBRARY variable to hold name of malloc library
extra/jemalloc/ChangeLog:
Updates changelog
extra/jemalloc/include/jemalloc/internal/arena.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/jemalloc_internal.h.in:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/private_namespace.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/include/jemalloc/internal/tcache.h:
Backported valgrind fixes from jemalloc 3.4.1
extra/jemalloc/src/arena.c:
Backported valgrind fixes from jemalloc 3.4.1
include/my_bitmap.h:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free() to avoid clash with jemalloc 3.4.1
mysql-test/mysql-test-run.pl:
Use option --soname-synonyms=somalloc=NON to valgrind when using jemalloc
mysql-test/valgrind.supp:
Supression of memory leak in OpenSuse 12.3
mysys/my_bitmap.c:
Renamed bitmap_init() and bitmap_free() to my_bitmap_init() and my_bitmap_free()
sql/ha_ndbcluster_binlog.cc:
Renames
sql/ha_ndbcluster_cond.h:
Renames
sql/ha_partition.cc:
Renames
sql/handler.cc:
Renames
sql/item_subselect.cc:
Renames
sql/log_event.cc:
Renames
sql/log_event_old.cc:
Renames
sql/mysqld.cc:
Renames
Show version related variables in mysqld --help
sql/opt_range.cc:
Renames
sql/opt_table_elimination.cc:
Renames
sql/partition_info.cc:
Renames
sql/rpl_injector.h:
Renames
sql/set_var.h:
Renames
sql/slave.cc:
Renames
sql/sql_bitmap.h:
Renames
sql/sql_insert.cc:
Renames
sql/sql_lex.h:
Renames
sql/sql_parse.cc:
Renames
sql/sql_partition.cc:
Renames
sql/sql_select.cc:
Renames
sql/sql_show.cc:
Renames
sql/sql_update.cc:
Renames
sql/sys_vars.cc:
Show version related variables in mysqld --help
sql/sys_vars.h:
Added SHOW_VALUE_IN_HELP marker for variables that should be shown in --help
sql/table.cc:
Renames
sql/table.h:
Removed not used bitmap_init_value
storage/connect/ha_connect.cc:
Removed compiler warning
storage/maria/ma_open.c:
Renames
unittest/mysys/bitmap-t.c:
Renames
