The function trans_rollback_to_savepoint(), unlike trans_savepoint(),
did not allow xa_state=XA_ACTIVE, so an attempt to do ROLLBCK TO SAVEPOINT
inside an XA transaction incorrectly returned an error
"...command cannot be executed ... in the ACTIVE state...".
Partially merging a MySQL patch:
7fb5c47390311d9b1b5367f97cb8fedd4102dd05
This is WL#7193 (Decouple THD and st_transactions)...
The currently merged part includes these changes:
- Introducing st_xid_state::check_has_uncommitted_xa()
- Reusing it in both trans_rollback_to_savepoint() and trans_savepoint(),
so now both allow XA_ACTIVE.
AND SAVEPOINT.
The bug was introduced by the patch for bug#11766752. This patch sets too
strong condition on XA state for SAVEPOINT statement that disallows its
execution during XA transaction. But since the statement SAVEPOINT doesn't
imply implicit commit we can allow its handling during XA transaction.
The patch explicitly check for transaction state against states XA_NOTR
and XA_ACTIVE for which the handling of statement SAVEPOINT for XA
transaction is allowed.
mysql-test/t/xa.test:
Testcase was adjusted for bug#13737343. Now SAVEPOINT is allowed for XA
transactions in ACTIVE state.
The issue is that xa.test failed sporadically on some platforms.
The reason for the test failure is a race condition in xa.test.
The race condition occures between connection that executes statement
INSERT INTO t2 SELECT FROM t1 and other connection that tries to run
statements DELETE FROM t1 and COMMIT. If COMMIT statement had been executed
before the statement INSERT INTO t2 SELECT FROM t1 was locked by lock
on table t1 (as a result of query from table t1) then the INSERT statement
is executed successfully and a following test for deadlock would failed.
This patch fixes this race condition by moving COMMIT statement after commit
of distributed transaction from concurrent session.
ASSERTION THD->TRANSACTION.XID_STATE.XID.IS_NULL()
FAILED
The triggered assert checks that the previous XA transaction has
done proper cleanup before a new XA transaction is started.
The bug that caused it to be triggered was that XA COMMIT did not
clean up error state if XA COMMIT discovered that the current XA
transaction had to be rolled back.
This patch fixes the problem by resetting the XA error state
before XA COMMIT calls ha_rollback_trans(). This allows following
XA transactions to be started without triggering the assert.
Test case added to xa.test.
TRX->CONC_STATE == 0 || TRX->CONC_STATE == 1
This bug was a different manifestation of Bug#11766752,
which was previously only fixed on mysql-trunk.
This patch backports the fix for Bug#11766752 to mysql-5.5,
which fixes the problem. The patch also adds some extra test
coverage.
Assert in Diagnostics_area::set_ok_status() for XA COMMIT
This assert was triggered if XA COMMIT was issued when an XA transaction
already had encountered an error (e.g. a deadlock) which required
the XA transaction to be rolled back.
In general, the assert is triggered if a statement tries to send OK to
the client when an error has already been reported. It was triggered
in this case because the trans_xa_commit() function first reported an
error, then rolled back the transaction and finally returned FALSE,
indicating success. Since trans_xa_commit() reported success,
mysql_execute_command() tried to report OK, triggering the assert.
This patch fixes the problem by fixing trans_xa_commit() to return TRUE
if it encounters an error that requires rollback, even if the rollback
itself is successful.
Test case added to xa.test.
The problem was that issuing XA END when the XA transaction was
already ended, caused an assertion. This assertion tests that
the server does not try to send OK to the client if there has
already been an error reported. The bug was only noticeable on
debug versions of the server.
The reason for the problem was that the trans_xa_end() function
reported success if the transaction was at XA_IDLE state at the
end regardless of any errors occured during processing of
trans_xa_end(). So if the transaction state was XA_IDLE already,
reported errors would be ignored.
This patch fixes the problem by having trans_xa_end() take into
consideration any reported errors. The patch also fixes a similar
bug with XA PREPARE.
Test case added to xa.test.
Conflicts:
Text conflict in client/mysqlbinlog.cc
Text conflict in mysql-test/Makefile.am
Text conflict in mysql-test/collections/default.daily
Text conflict in mysql-test/r/mysqlbinlog_row_innodb.result
Text conflict in mysql-test/suite/rpl/r/rpl_typeconv_innodb.result
Text conflict in mysql-test/suite/rpl/t/rpl_get_master_version_and_clock.test
Text conflict in mysql-test/suite/rpl/t/rpl_row_create_table.test
Text conflict in mysql-test/suite/rpl/t/rpl_slave_skip.test
Text conflict in mysql-test/suite/rpl/t/rpl_typeconv_innodb.test
Text conflict in mysys/charset.c
Text conflict in sql/field.cc
Text conflict in sql/field.h
Text conflict in sql/item.h
Text conflict in sql/item_func.cc
Text conflict in sql/log.cc
Text conflict in sql/log_event.cc
Text conflict in sql/log_event_old.cc
Text conflict in sql/mysqld.cc
Text conflict in sql/rpl_utility.cc
Text conflict in sql/rpl_utility.h
Text conflict in sql/set_var.cc
Text conflict in sql/share/Makefile.am
Text conflict in sql/sql_delete.cc
Text conflict in sql/sql_plugin.cc
Text conflict in sql/sql_select.cc
Text conflict in sql/sql_table.cc
Text conflict in storage/example/ha_example.h
Text conflict in storage/federated/ha_federated.cc
Text conflict in storage/myisammrg/ha_myisammrg.cc
Text conflict in storage/myisammrg/myrg_open.c
SET autocommit=1 while XA transaction is active may
cause various side effects, including memory corruption
and server crash.
The problem is that SET autocommit=1 and further queries
attempt to commit local transaction, whereas XA transaction
is still active.
As local and XA transactions are mutually exclusive, this
patch forbids enabling autocommit mode while XA transaction
is active.
mysql-test/r/xa.result:
A test case for BUG#51342.
mysql-test/t/xa.test:
A test case for BUG#51342.
sql/set_var.cc:
Forbid enabling autocommit mode while XA transaction is
active.
2617.31.12, 2617.31.15, 2617.31.15, 2617.31.16, 2617.43.1
- initial changeset that introduced the fix for
Bug#989 and follow up fixes for all test suite failures
introduced in the initial changeset.
------------------------------------------------------------
revno: 2617.31.1
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 4284-6.0
timestamp: Fri 2009-03-06 19:17:00 -0300
message:
Bug#989: If DROP TABLE while there's an active transaction, wrong binlog order
WL#4284: Transactional DDL locking
Currently the MySQL server does not keep metadata locks on
schema objects for the duration of a transaction, thus failing
to guarantee the integrity of the schema objects being used
during the transaction and to protect then from concurrent
DDL operations. This also poses a problem for replication as
a DDL operation might be replicated even thought there are
active transactions using the object being modified.
The solution is to defer the release of metadata locks until
a active transaction is either committed or rolled back. This
prevents other statements from modifying the table for the
entire duration of the transaction. This provides commitment
ordering for guaranteeing serializability across multiple
transactions.
- Incompatible change:
If MySQL's metadata locking system encounters a lock conflict,
the usual schema is to use the try and back-off technique to
avoid deadlocks -- this schema consists in releasing all locks
and trying to acquire them all in one go.
But in a transactional context this algorithm can't be utilized
as its not possible to release locks acquired during the course
of the transaction without breaking the transaction commitments.
To avoid deadlocks in this case, the ER_LOCK_DEADLOCK will be
returned if a lock conflict is encountered during a transaction.
Let's consider an example:
A transaction has two statements that modify table t1, then table
t2, and then commits. The first statement of the transaction will
acquire a shared metadata lock on table t1, and it will be kept
utill COMMIT to ensure serializability.
At the moment when the second statement attempts to acquire a
shared metadata lock on t2, a concurrent ALTER or DROP statement
might have locked t2 exclusively. The prescription of the current
locking protocol is that the acquirer of the shared lock backs off
-- gives up all his current locks and retries. This implies that
the entire multi-statement transaction has to be rolled back.
- Incompatible change:
FLUSH commands such as FLUSH PRIVILEGES and FLUSH TABLES WITH READ
LOCK won't cause locked tables to be implicitly unlocked anymore.
mysql-test/extra/binlog_tests/drop_table.test:
Add test case for Bug#989.
mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction.
mysql-test/include/mix1.inc:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction.
mysql-test/include/mix2.inc:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction.
mysql-test/r/flush_block_commit.result:
Update test case result (WL#4284).
mysql-test/r/flush_block_commit_notembedded.result:
Update test case result (WL#4284).
mysql-test/r/innodb.result:
Update test case result (WL#4284).
mysql-test/r/innodb_mysql.result:
Update test case result (WL#4284).
mysql-test/r/lock.result:
Add test case result for an effect of WL#4284/Bug#989
(all locks should be released when a connection terminates).
mysql-test/r/mix2_myisam.result:
Update test case result (effects of WL#4284/Bug#989).
mysql-test/r/not_embedded_server.result:
Update test case result (effects of WL#4284/Bug#989).
Add a test case for interaction of WL#4284 and FLUSH PRIVILEGES.
mysql-test/r/partition_innodb_semi_consistent.result:
Update test case result (effects of WL#4284/Bug#989).
mysql-test/r/partition_sync.result:
Temporarily disable the test case for Bug#43867,
which will be fixed by a subsequent backport.
mysql-test/r/ps.result:
Add a test case for effect of PREPARE on transactional
locks: we take a savepoint at beginning of PREAPRE
and release it at the end. Thus PREPARE does not
accumulate metadata locks (Bug#989/WL#4284).
mysql-test/r/read_only_innodb.result:
Update test case result (effects of WL#4284/Bug#989).
mysql-test/suite/binlog/r/binlog_row_drop_tbl.result:
Add a test case result (WL#4284/Bug#989).
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
Update test case result (effects of WL#4284/Bug#989).
mysql-test/suite/binlog/r/binlog_stm_drop_tbl.result:
Add a test case result (WL#4284/Bug#989).
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
Update test case result (effects of WL#4284/Bug#989).
mysql-test/suite/binlog/r/binlog_unsafe.result:
A side effect of Bug#989 -- slightly different table map ids.
mysql-test/suite/binlog/t/binlog_row_drop_tbl.test:
Add a test case for WL#4284/Bug#989.
mysql-test/suite/binlog/t/binlog_stm_drop_tbl.test:
Add a test case for WL#4284/Bug#989.
mysql-test/suite/binlog/t/binlog_stm_row.test:
Update to the new state name. This
is actually a follow up to another patch for WL#4284,
that changes Locked thread state to Table lock.
mysql-test/suite/ndb/r/ndb_index_ordered.result:
Remove result for disabled part of the test case.
mysql-test/suite/ndb/t/disabled.def:
Temporarily disable a test case (Bug#45621).
mysql-test/suite/ndb/t/ndb_index_ordered.test:
Disable a part of a test case (needs update to
reflect semantics of Bug#989).
mysql-test/suite/rpl/t/disabled.def:
Disable tests made meaningless by transactional metadata
locking.
mysql-test/suite/sys_vars/r/autocommit_func.result:
Add a commit (Bug#989).
mysql-test/suite/sys_vars/t/autocommit_func.test:
Add a commit (Bug#989).
mysql-test/t/flush_block_commit.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction.
mysql-test/t/flush_block_commit_notembedded.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction.
Add a test case for transaction-scope locks and the global
read lock (Bug#989/WL#4284).
mysql-test/t/innodb.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction
(effects of Bug#989/WL#4284).
mysql-test/t/lock.test:
Add a test case for Bug#989/WL#4284.
mysql-test/t/not_embedded_server.test:
Add a test case for Bug#989/WL#4284.
mysql-test/t/partition_innodb_semi_consistent.test:
Replace TRUNCATE with DELETE, to not issue
an implicit commit of a transaction, and not depend
on metadata locks.
mysql-test/t/partition_sync.test:
Temporarily disable the test case for Bug#43867,
which needs a fix to be backported from 6.0.
mysql-test/t/ps.test:
Add a test case for semantics of PREPARE and transaction-scope
locks: metadata locks on tables used in PREPARE are enclosed into a
temporary savepoint, taken at the beginning of PREPARE,
and released at the end. Thus PREPARE does not effect
what locks a transaction owns.
mysql-test/t/read_only_innodb.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction
(Bug#989/WL#4284).
Wait for the read_only statement to actually flush tables before
sending other concurrent statements that depend on its state.
mysql-test/t/xa.test:
Fix test case to reflect the fact that transactions now hold
metadata locks for the duration of a transaction
(Bug#989/WL#4284).
sql/ha_ndbcluster_binlog.cc:
Backport bits of changes of ha_ndbcluster_binlog.cc
from 6.0, to fix the failing binlog test suite with
WL#4284. WL#4284 implementation does not work
with 5.1 implementation of ndbcluster binlog index.
sql/log_event.cc:
Release metadata locks after issuing a commit.
sql/mdl.cc:
Style changes (WL#4284).
sql/mysql_priv.h:
Rename parameter to match the name used in the definition (WL#4284).
sql/rpl_injector.cc:
Release metadata locks on commit (WL#4284).
sql/rpl_rli.cc:
Remove assert made meaningless, metadata locks are released
at the end of the transaction.
sql/set_var.cc:
Close tables and release locks if autocommit mode is set.
sql/slave.cc:
Release metadata locks after a rollback.
sql/sql_acl.cc:
Don't implicitly unlock locked tables. Issue a implicit commit
at the end and unlock tables.
sql/sql_base.cc:
Defer the release of metadata locks when closing tables
if not required to.
Issue a deadlock error if the locking protocol requires
that a transaction re-acquire its locks.
Release metadata locks when closing tables for reopen.
sql/sql_class.cc:
Release metadata locks if the thread is killed.
sql/sql_parse.cc:
Release metadata locks after implicitly committing a active
transaction, or after explicit commits or rollbacks.
sql/sql_plugin.cc:
Allocate MDL request on the stack as the use of the table
is contained within the function. It will be removed from
the context once close_thread_tables is called at the end
of the function.
sql/sql_prepare.cc:
The problem is that the prepare phase of the CREATE TABLE
statement takes a exclusive metadata lock lock and this can
cause a self-deadlock the thread already holds a shared lock
on the table being that should be created.
The solution is to make the prepare phase take a shared
metadata lock when preparing a CREATE TABLE statement. The
execution of the statement will still acquire a exclusive
lock, but won't cause any problem as it issues a implicit
commit.
After some discussions with stakeholders it has been decided that
metadata locks acquired during a PREPARE statement must be released
once the statement is prepared even if it is prepared within a multi
statement transaction.
sql/sql_servers.cc:
Don't implicitly unlock locked tables. Issue a implicit commit
at the end and unlock tables.
sql/sql_table.cc:
Close table and release metadata locks after a admin operation.
sql/table.h:
The problem is that the prepare phase of the CREATE TABLE
statement takes a exclusive metadata lock lock and this can
cause a self-deadlock the thread already holds a shared lock
on the table being that should be created.
The solution is to make the prepare phase take a shared
metadata lock when preparing a CREATE TABLE statement. The
execution of the statement will still acquire a exclusive
lock, but won't cause any problem as it issues a implicit
commit.
sql/transaction.cc:
Release metadata locks after the implicitly committed due
to a new transaction being started. Also, release metadata
locks acquired after a savepoint if the transaction is rolled
back to the save point.
The problem is that in some cases transaction-long metadata locks
could be released before the transaction was committed. This could
happen when a active transaction was ended by a "START TRANSACTION"
or "BEGIN" statement, in which case the metadata locks would be
released before the actual commit of the active transaction.
The solution is to defer the release of metadata locks to after the
transaction has been implicitly committed. No test case is provided
as the effort to provide one is too disproportional to the size of
the fix.
XA START may cause assertion failure/server crash when it is called
after unilateral roll back issued by the Resource Manager (both
in regular transaction and after XA transaction).
The problem was that rm_error variable wasn't set/reset properly.
mysql-test/r/xa.result:
A test case for BUG#43171.
mysql-test/t/xa.test:
A test case for BUG#43171.
sql/handler.cc:
Setting rm_error when we're out of XA transaction has no
special meaning. But it blocks reset of thd->transaction.xid
structure later.
sql/sql_parse.cc:
Reset rm_error before we enter ha_rollback(), so
thd->transaction.xid strucure is reinitialized.
The problem is that the one phase commit function failed to
properly end a empty transaction. The solution is to ensure
that the transaction cleanup procedure is invoked even for
empty transactions.
mysql-test/r/xa.result:
Add test case result for Bug#45548
mysql-test/t/xa.test:
Add test case for Bug#45548
sql/handler.cc:
Invoke transaction cleanup function whenever a transaction is ended.
The problem is that when a optimization of read-only transactions
(bypass 2-phase commit) was implemented, it removed the code that
reseted the XID once a transaction wasn't active anymore:
sql/sql_parse.cc:
- bzero(&thd->transaction.stmt, sizeof(thd->transaction.stmt));
- if (!thd->active_transaction())
- thd->transaction.xid_state.xid.null();
+ thd->transaction.stmt.reset();
This mostly worked fine as the transaction commit and rollback
functions (in handler.cc) reset the XID once the transaction is
ended. But those functions wouldn't reset the XID in case of
a empty transaction, leading to a assertion when a new starting
a new XA transaction.
The solution is to ensure that the XID state is reset when empty
transactions are ended (by either commit or rollback). This is
achieved by reorganizing the code so that the transaction cleanup
routine is invoked whenever a transaction is ended.
mysql-test/r/xa.result:
Add test case result for Bug#44672
mysql-test/t/xa.test:
Add test case for Bug#44672
sql/handler.cc:
Invoke transaction cleanup function whenever a transaction is
ended. Move XID state reset logic to the transaction cleanup
function.
sql/sql_class.h:
Add XID state reset logic.
+ Fix for Bug#43114 wait_until_count_sessions too restrictive, random PB failures
+ Removal of a lot of other weaknesses found
+ modifications according to review
The problem was that the server did not robustly handle a
unilateral roll back issued by the Resource Manager (RM)
due to a resource deadlock within the transaction branch.
By not acknowledging the roll back, the server (TM) would
eventually corrupt the XA transaction state and crash.
The solution is to mark the transaction as rollback-only
if the RM indicates that it rolled back its branch of the
transaction.
mysql-test/r/xa.result:
Add test case result for Bug#28323
mysql-test/t/xa.test:
Add test case for Bug#28323
sql/handler.cc:
Reset XID only at the end of the global transaction.
sql/share/errmsg.txt:
Add new error codes.
sql/sql_class.h:
Remember the error reported by the Resource Manager.
sql/sql_parse.cc:
Rollback the transaction if the Resource Manager reported
a error and rolled back its branch of the transaction.
- Use mysql_system_tables.sql to create MySQL system tables in
all places where we create them(mysql_install_db, mysql-test-run-pl
and mysql_fix_privilege_tables.sql)
BitKeeper/deleted/.del-init_db.sql:
Rename: mysql-test/init_db.sql -> BitKeeper/deleted/.del-init_db.sql
BitKeeper/deleted/.del-init_db.sql~a77d572c39d5a1f8:
Rename: mysql-test/lib/init_db.sql -> BitKeeper/deleted/.del-init_db.sql~a77d572c39d5a1f8
BitKeeper/deleted/.del-mysql_create_system_tables.sh:
Rename: scripts/mysql_create_system_tables.sh -> BitKeeper/deleted/.del-mysql_create_system_tables.sh
BitKeeper/etc/ignore:
Added scripts/mysql_fix_privilege_tables.sql to the ignore list
mysql-test/Makefile.am:
lib/init_db.sql has been removed
mysql-test/mysql-test-run.pl:
- Build var/tmp/bootstrap.sql from mysql_system_tables.sql,
mysql_test_data_timezone.sql and fill_help_tables.sql and use
it when bootsraping the system tables to use during test.
mysql-test/r/create.result:
Update result file
mysql-test/r/derived.result:
Update result file
mysql-test/r/join.result:
Update result file
mysql-test/r/mysql_upgrade.result:
Update result file
mysql-test/r/sp-security.result:
Update result file
mysql-test/t/create.test:
Add user mysqltest_1 before trying to connect as that user - no
anon users by default anymore
mysql-test/t/derived.test:
Add user mysqltest_1 before trying to connect as that user - no
anon users by default anymore
mysql-test/t/grant2.test:
Add anonymous users for part of thes that need it.
mysql-test/t/grant_cache.test:
Add anonymous users for part of thes that need it.
mysql-test/t/init_connect.test:
Add anonymous users for part of thes that need it.
mysql-test/t/lock_multi.test:
Add anonymous users for part of thes that need it.
mysql-test/t/ndb_basic.test:
Connect as "root", blank user will take currently logged in
username
mysql-test/t/ndb_index_ordered.test:
Connect as "root", blank user will take currently logged in
username
mysql-test/t/ndb_multi.test:
Connect as "root", blank user will take currently logged in
username
mysql-test/t/overflow.test:
Connect as root - no anonymous users by default anymore
mysql-test/t/rpl_temporary.test:
Add anonymous users for the test
mysql-test/t/xa.test:
Connect as "root", blank user wil pick currently logged in user
scripts/Makefile.am:
Remove mysql_create_system_tables.sh
Add mysql_system_tables.sql and mysql_test_data_timezone.sql
Build mysql_fix_privilege_tables.sql from mysql_system_tables.sql
and mysql_fix_privilege_tables.sql.in
scripts/mysql_fix_privilege_tables.sh:
Update message describing what the script does
scripts/mysql_fix_privilege_tables.sql.in:
Remove the part that creates system tables as that will be added to
mysql_fix_privileg_tables.sql from mysql_system_tables.sql
Change all comments to use #
scripts/mysql_install_db.sh:
Use mysql_system_tables.sql to create the MySQL system tables
Update comments and indentation
Add more descriptive comments about --windows switch
Reduce number of hardcoded names for the SQL files the script
looks for
mysql-test/include/add_anonymous_users.inc:
New BitKeeper file ``mysql-test/include/add_anonymous_users.inc''
mysql-test/include/delete_anonymous_users.inc:
New BitKeeper file ``mysql-test/include/delete_anonymous_users.inc''
scripts/mysql_system_tables.sql:
New BitKeeper file ``scripts/mysql_system_tables.sql''
scripts/mysql_test_data_timezone.sql:
New BitKeeper file ``scripts/mysql_test_data_timezone.sql''
fix a race condition in TC_LOG_BINLOG::unlog
include/Makefile.am:
remove the rest of isam/merge references
include/config-win.h:
unused and abused macro removed
include/my_pthread.h:
unused and abused macro removed
include/my_sys.h:
MY_IGNORE_BADFD flag
include/mysql_embed.h:
remove the rest of isam/merge references
mysql-test/r/replace.result:
remove the rest of isam/merge references
mysql-test/t/replace.test:
remove the rest of isam/merge references
mysql-test/t/xa.test:
comment
mysys/my_sync.c:
MY_IGNORE_BADFD flag
sql/handler.cc:
remove the rest of isam/merge references
sql/log.cc:
fix a race condition in TC_LOG_BINLOG::unlog
preparation for binlog group commit
sql/mysql_priv.h:
remove duplicates
sql/mysqld.cc:
remove the rest of isam/merge references
sql/opt_range.cc:
remove the rest of isam/merge references
sql/set_var.cc:
hide unused variables. simplify sync_binlog code
sql/sql_base.cc:
remove the rest of isam/merge references
sql/sql_class.h:
cleanup
