In case of error on opening VIEW (absent table for example) it is still possible to print its definition but some variable is not set (table_list->derived->derived) so it is better do not try to test it when there is safer alternative (table_list itself).
An attempt to mark reference as dependent lead to transfering this property to
original view field and through it to other references of this field which
can't be dependent.
1. Special mode to search in error logs: if SEARCH_RANGE is not set,
the file is considered an error log and the search is performed
since the last CURRENT_TEST: line
2. Number of matches is printed too. "FOUND 5 /foo/ in bar".
Use greedy .* at the end of the pattern if number of matches
isn't stable. If nothing is found it's still "NOT FOUND",
not "FOUND 0".
3. SEARCH_ABORT specifies the prefix of the output.
Can be "NOT FOUND" or "FOUND" as before,
but also "FOUND 5 " if needed.
Also, implement MDEV-11027 a little differently from 5.5 and 10.0:
recv_apply_hashed_log_recs(): Change the return type back to void
(DB_SUCCESS was always returned).
Report progress also via systemd using sd_notifyf().
The function mysql_derived_merge() erroneously did not mark newly formed
AND formulas in ON conditions with the flag abort_on_null. As a result
not_null_tables() calculated incorrectly for these conditions. This
could prevent conversion of embedded outer joins into inner joins.
Changed a test case from table_elim.test to preserve the former execution
plan.
Implementation of MDEV-7660 introduced unwanted incompatible change:
modifications under LOCK TABLES with autocommit enabled are rolled back on
disconnect. Previously everything was committed, because LOCK TABLES didn't
adjust autocommit setting.
This patch restores original behavior by reverting some changes done in
MDEV-7660:
- sql/sql_parse.cc: do not reset autocommit on LOCK TABLES
- sql/sql_base.cc: do not set autocommit on UNLOCK TABLES
- test cases: main.lock_tables_lost_commit, main.partition_explicit_prune,
rpl.rpl_switch_stm_row_mixed, tokudb.nested_txn_implicit_commit,
tokudb_bugs.db806
But it makes InnoDB tables under LOCK TABLES ... READ [LOCAL] not protected
against DML. To restore protection some changes from WL#6671 were merged,
specifically MDL_SHARED_READ_ONLY and test cases.
WL#6671 merge highlights:
- Not all tests merged.
- In MySQL LOCK TABLES ... READ acquires MDL_SHARED_READ_ONLY for all engines,
in MariaDB MDL_SHARED_READ is always acquired first and then upgraded to
MDL_SHARED_READ_ONLY for InnoDB only.
- The above allows us to omit MDL_SHARED_WRITE_LOW_PRIO implementation in
MariaDB, which is rather useless with InnoDB. In MySQL it is needed to
preserve locking behavior between low priority writes and LOCK TABLES ... READ
for non-InnoDB engines (covered by sys_vars.sql_low_priority_updates_func).
- Omitted HA_NO_READ_LOCAL_LOCK, we rely on lock_count() instead.
- Omitted "piglets": in MariaDB stream of DML against InnoDB table may lead to
concurrent LOCK TABLES ... READ starvation.
- HANDLER ... OPEN acquires MDL_SHARED_READ instead of MDL_SHARED in MariaDB.
- Omitted SNRW->X MDL lock upgrade for IMPORT/DISCARD TABLESPAECE under LOCK
TABLES.
- Omitted strong locks for views, triggers and SP under LOCK TABLES.
- Omitted IX schema lock for LOCK TABLES READ.
- Omitted deadlock weight juggling for LOCK TABLES.
Full WL#6671 merge status:
- innodb.innodb-lock: fully merged
- main.alter_table: not merged due to different HANDLER solution
- main.debug_sync: fully merged
- main.handler_innodb: not merged due to different HANDLER solution
- main.handler_myisam: not merged due to different HANDLER solution
- main.innodb_mysql_lock: fully merged
- main.insert_notembedded: fully merged
- main.lock: not merged (due to no strong locks for views)
- main.lock_multi: not merged
- main.lock_sync: fully merged (partially in MDEV-7660)
- main.mdl_sync: not merged
- main.partition_debug_sync: not merged due to different HANDLER solution
- main.status: fully merged
- main.view: fully merged
- perfschema.mdl_func: not merged (no such test in MariaDB)
- perfschema.table_aggregate_global_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_global_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_hist_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_aggregate_thread_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_global_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_hist_4u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_2u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_2u_3t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_4u_2t: not merged (didn't fail in MariaDB)
- perfschema.table_lock_aggregate_thread_4u_3t: not merged (didn't fail in MariaDB)
- sys_vars.sql_low_priority_updates_func: not merged
- include/thr_rwlock.h: not merged, rw_pr_lock_assert_write_owner and
rw_pr_lock_assert_not_write_owner are macros in MariaDB
- sql/handler.h: not merged (HA_NO_READ_LOCAL_LOCK)
- sql/mdl.cc: partially merged (MDL_SHARED_READ_ONLY only)
- sql/mdl.h: partially merged (MDL_SHARED_READ_ONLY only)
- sql/lock.cc: fully merged
- sql/sp_head.cc: not merged
- sql/sp_head.h: not merged
- sql/sql_base.cc: partially merged (MDL_SHARED_READ_ONLY only)
- sql/sql_base.h: not merged
- sql/sql_class.cc: fully merged
- sql/sql_class.h: fully merged
- sql/sql_handler.cc: merged partially (different solution in MariaDB)
- sql/sql_parse.cc: partially merged, mostly omitted low priority write part
- sql/sql_reload.cc: not merged comment change
- sql/sql_table.cc: not merged SNRW->X upgrade for IMPORT/DISCARD TABLESPACE
- sql/sql_view.cc: not merged
- sql/sql_yacc.yy: not merged (MDL_SHARED_WRITE_LOW_PRIO, MDL_SHARED_READ_ONLY)
- sql/table.cc: not merged (MDL_SHARED_WRITE_LOW_PRIO)
- sql/table.h: not merged (MDL_SHARED_WRITE_LOW_PRIO)
- sql/trigger.cc: not merged
- storage/innobase/handler/ha_innodb.cc: merged store_lock()/lock_count()
changes (in MDEV-7660), didn't merge HA_NO_READ_LOCAL_LOCK
- storage/innobase/handler/ha_innodb.h: fully merged in MDEV-7660
- storage/myisammrg/ha_myisammrg.cc: not merged comment change
- storage/perfschema/table_helper.cc: not merged (no MDL support in MariaDB PFS)
- unittest/gunit/mdl-t.cc: not merged
- unittest/gunit/mdl_sync-t.cc: not merged
MariaDB specific changes:
- handler.heap: different HANDLER solution, MDEV-7660
- handler.innodb: different HANDLER solution, MDEV-7660
- handler.interface: different HANDLER solution, MDEV-7660
- handler.myisam: different HANDLER solution, MDEV-7660
- main.mdl_sync: MDEV-7660 specific changes
- main.partition_debug_sync: removed test due to different HANDLER solution,
MDEV-7660
- main.truncate_coverage: removed test due to different HANDLER solution,
MDEV-7660
- mysql-test/include/mtr_warnings.sql: additional cleanup, MDEV-7660
- mysql-test/lib/v1/mtr_report.pl: additional cleanup, MDEV-7660
- plugin/metadata_lock_info/metadata_lock_info.cc: not in MySQL
- sql/sql_handler.cc: MariaDB specific fix for mysql_ha_read(), MDEV-7660
otherwise we'd need to store sql_mode *per vcol*
(consider CREATE INDEX...) and how SHOW CREATE TABLE would
support that?
Additionally, get rid of vcol::expr_str, just to make sure
the string is always generated and never leaked in the
original form.
MDEV-10134 Add full support for DEFAULT
- Added support for using tables with MySQL 5.7 virtual fields,
including MySQL 5.7 syntax
- Better error messages also for old cases
- CREATE ... SELECT now also updates timestamp columns
- Blob can now have default values
- Added new system variable "check_constraint_checks", to turn of
CHECK constraint checking if needed.
- Removed some engine independent tests in suite vcol to only test myisam
- Moved some tests from 'include' to 't'. Should some day be done for all tests.
- FRM version increased to 11 if one uses virtual fields or constraints
- Changed to use a bitmap to check if a field has got a value, instead of
setting HAS_EXPLICIT_VALUE bit in field flags
- Expressions can now be up to 65K in total
- Ensure we are not refering to uninitialized fields when handling virtual fields or defaults
- Changed check_vcol_func_processor() to return a bitmap of used types
- Had to change some functions that calculated cached value in fix_fields to do
this in val() or getdate() instead.
- store_now_in_TIME() now takes a THD argument
- fill_record() now updates default values
- Add a lookahead for NOT NULL, to be able to handle DEFAULT 1+1 NOT NULL
- Automatically generate a name for constraints that doesn't have a name
- Added support for ALTER TABLE DROP CONSTRAINT
- Ensure that partition functions register virtual fields used. This fixes
some bugs when using virtual fields in a partitioning function
use Item->neg to convert generate negative Item_num's
instead of Item_func_neg(Item_num).
Based on the following commit:
Author: Monty <monty@mariadb.org>
Date: Mon May 30 22:44:00 2016 +0300
Make negative number their own token
The negation (-) operator will call Item->neg() one underlying numeric constants
and remove itself (like the NOT() function does today for other NOT functions.
This simplifies things
- -1 is not anymore an expression but a basic_const_item
- improves optimizer
- DEFAULT -1 doesn't need special handling anymore
- When we add DEFAULT expressions, -1 will be treated exactly like 1
- printing of items doesn't anymore put braces around all negative numbers
Other things fixed:
- Fixed that longlong converted to decimal's has a more appropriate size
- Fixed that "-0.0" read into a decimal is interpreted as 0.0
MDEV-9408 CREATE TABLE SELECT MAX(int_column) creates different columns for table vs view
There were three almost identical pieces of the code:
- Field *Item_func::tmp_table_field();
- Field *Item_sum::create_tmp_field();
- Field *create_tmp_field_from_item();
with a difference in very small details (hence the bugs):
Only Item_func::tmp_table_field() was correct, the other two were not.
Removing the two incorrect pieces of the redundant code.
Joining these three functions/methods into a single virtual method
Item::create_tmp_field().
Additionally, moving Item::make_string_field() and
Item::tmp_table_field_from_field_type() from the public into the
protected section of the class declaration, as they are now not
needed outside of Item.
DOING BAD DDL IN PREPARED STATEMENT
Analysis
========
A repeat execution of the prepared statement 'ALTER TABLE v1
CHECK PARTITION' where v1 is a view leads to server exit.
ALTER TABLE ... CHECK PARTITION is not applicable for views
and check for the same check is missing. This leads to
further execution and creation of derived table for the view
(Allocated under temp_table mem_root). Any reference to open
view or related pointers from second execution leads to
server exit as the same was freed at previous execution closure.
Fix:
======
Added check for view in mysql_admin_table() on PARTITION
operation. This will prevent mysql_admin_table() from
going ahead and creating temp table and related issues.
Changed message on admin table view operation error to
be more appropriate.
find_item_in_list() now recognize view fields like a fields even if they rever to an expression.
The problem of schema name do not taken into account for field with it and
derived table fixed.
Duplicating code removed
