Query_log_event::error_code
A query can perform completely having the local var error of mysql_$query
zero, where $query in insert, update, delete, load,
and be binlogged with error_code e.g KILLED_QUERY while there is no
reason do to so.
That can happen because Query_log_event consults thd->killed flag to
evaluate error_code.
Fixed with implementing a scheme suggested and partly implemented at
time of bug@22725 work-on. error_status is cached immediatly after the
control leaves the main rows-loop and that instance always corresponds
to `error' the local of mysql_$query functions. The cached value
is passed to Query_log_event constructor, not the default thd->killed
which can be changed in between of the caching and the constructing.
Binlogging of the statement with a side effect like a modified non-trans table did not happen.
The artifact involved all binloggable dml queries.
Fixed with changing the binlogging conditions all over the code to exploit thd->transaction.stmt.modified_non_trans_table
introduced by the patch for bug@27417.
Multi-delete case has own specific addressed by another bug@29136. Multi-update case has been addressed by bug#27716 and
patch and will need merging.
Bug #27417 thd->no_trans_update.stmt lost value inside of SF-exec-stack
Once had been set the flag might later got reset inside of a stored routine
execution stack.
The reason was in that there was no check if a new statement started at time
of resetting.
The artifact affects most of binlogable DML queries. Notice, that multi-update
is wrapped up within
bug@27716 fix, multi-delete bug@29136.
Fixed with saving parent's statement flag of whether the statement modified
non-transactional table, and unioning (merging) the value with that was gained
in mysql_execute_command.
Resettling thd->no_trans_update members into thd->transaction.`member`;
Asserting code;
Effectively the following properties are held.
1. At the end of a substatement thd->transaction.stmt.modified_non_trans_table
reflects the fact if such a table got modified by the substatement.
That also respects THD::really_abort_on_warnin() requirements.
2. Eventually thd->transaction.stmt.modified_non_trans_table will be computed as
the union of the values of all invoked sub-statements.
That fixes this bug#27417;
Computing of thd->transaction.all.modified_non_trans_table is refined to base to
the stmt's value for all the case including insert .. select statement which
before the patch had an extra issue bug@28960.
Minor issues are covered with mysql_load, mysql_delete, and binloggin of insert in
to temp_table select.
The supplied test verifies limitely, mostly asserts. The ultimate testing is defered
for bug@13270, bug@23333.
The `SELECT 'r' INTO OUTFILE ... FIELDS ENCLOSED BY 'r' ' statement
encoded the 'r' string to a 4 byte string of value x'725c7272'
(sequence of 4 characters: r\rr).
The LOAD DATA statement decoded this string to a 1 byte string of
value x'0d' (ASCII Carriage Return character) instead of the original
'r' character.
The same error also happened with the FIELDS ENCLOSED BY clause
followed by special characters: 'n', 't', 'r', 'b', '0', 'Z' and 'N'.
NOTE 1: This is a result of the undocumented feature: the LOAD DATA INFILE
recognises 2-byte input sequences like \n, \t, \r and \Z in addition
to documented 2-byte sequences: \0 and \N. This feature should be
documented (here backspace character is a default ESCAPED BY character,
in the real-life example it may be any ESCAPED BY character).
NOTE 2, changed behaviour:
Now the `SELECT INTO OUTFILE' statement with the `FIELDS ENCLOSED BY'
clause followed by one of: 'n', 't', 'r', 'b', '0', 'Z' or 'N' characters
encodes this special character itself by doubling it ('r' --> 'rr'),
not by prepending it with an escape character.
TIMESTAMP field when no value has been provided.
The LOAD DATA sets the current time in the TIMESTAMP field with
CURRENT_TIMESTAMP default value when the field is detected as a null.
But when the LOAD DATA command loads data from a file that doesn't contain
enough data for all fields then the rest of fields are simply set to null
without any check. This leads to no value being inserted to such TIMESTAMP
field.
Now the read_sep_field() and the read_fixed_length() functions set current
time to the TIMESTAMP field with CURRENT_TIMESTAMP default value in all cases
when a NULL value is loaded to the field.
This patch corrects a bug involving a LOAD DATA INFILE operation on a
transactional table. It corrects a problem in the error handler moving
the transactional table check and autocommit_or_rollback operation to the
end of the error handler. An additional test case was added to detect this
condition.
NO_AUTO_VALUE_ON_ZERO mode.
The table->auto_increment_field_not_null variable wasn't reset after
reading a row which may lead to inserting a wrong value to the auto-increment
field to the following row.
The table->auto_increment_field_not_null variable is reset now right after a
row is being written in the read_fixed_length() and the read_sep_field()
functions.
Removed wrong setting of the table->auto_increment_field_not_null variable in
the read_sep_field() function.
In certain cases AFTER UPDATE/DELETE triggers on NDB tables that referenced
subject table didn't see the results of operation which caused invocation
of those triggers. In other words AFTER trigger invoked as result of update
(or deletion) of particular row saw version of this row before update (or
deletion).
The problem occured because NDB handler in those cases postponed actual
update/delete operations to be able to perform them later as one batch.
This fix solves the problem by disabling this optimization for particular
operation if subject table has AFTER trigger for this operation defined.
To achieve this we introduce two new flags for handler::extra() method:
HA_EXTRA_DELETE_CANNOT_BATCH and HA_EXTRA_UPDATE_CANNOT_BATCH.
These are called if there exists AFTER DELETE/UPDATE triggers during a
statement that potentially can generate calls to delete_row()/update_row().
This includes multi_delete/multi_update statements as well as insert statements
that do delete/update as part of an ON DUPLICATE statement.
NO_AUTO_VALUE_ON_ZERO mode.
In the NO_AUTO_VALUE_ON_ZERO mode the table->auto_increment_field_not_null
variable is used to indicate that a non-NULL value was specified by the user
for an auto_increment column. When an INSERT .. ON DUPLICATE updates the
auto_increment field this variable is set to true and stays unchanged for the
next insert operation. This makes the next inserted row sometimes wrongly have
0 as the value of the auto_increment field.
Now the fill_record() function resets the table->auto_increment_field_not_null
variable before filling the record.
The table->auto_increment_field_not_null variable is also reset by the
open_table() function for a case if we missed some auto_increment_field_not_null
handling bug.
Now the table->auto_increment_field_not_null is reset at the end of the
mysql_load() function.
Reset the table->auto_increment_field_not_null variable after each
write_row() call in the copy_data_between_tables() function.
thd->options' OPTION_STATUS_NO_TRANS_UPDATE bit was not restored at the end of SF() invocation, where
SF() modified non-ta table.
As the result of this artifact it was not possible to detect whether there were any side-effects when
top-level query ends.
If the top level query table was not modified and the bit is lost there would be no binlogging.
Fixed with preserving the bit inside of thd->no_trans_update struct. The struct agregates two bool flags
telling whether the current query and the current transaction modified any non-ta table.
The flags stmt, all are dropped at the end of the query and the transaction.
When INSERT is done over a view the table being inserted into is
checked to be unique among all views tables. But if the view contains
self-joined table an error will be thrown even if all tables are used under
different aliases.
The unique_table() function now also checks tables' aliases when needed.
This patch fixes problem that LOAD DATA could use different
character sets when loading files on master and on slave sides:
- Adding replication of thd->variables.collation_database
- Adding optional character set clause into LOAD DATA
Note, the second way, with explicit CHARACTER SET clause
should be the recommended way to load data using an alternative
character set.
The old way, using "SET @@character_set_database=xxx" should be
gradually depricated.
to the client only after the binlog write and engine commit.
No testcase for this bug, as to reproduce it, we need to "kill -9" mysqld,
which we cannot do in the testsuite. But, I tested by hand.
- Implement --secure-file-priv=<dir> option that limits
"load_file", "LOAD DATA" and "SELECT .. INTO OUTFILE" to work
with files in specified dir.
- Use above option for mysqld in mysql-test-run.pl
Corrected spelling in copyright text
Makefile.am:
Don't update the files from BitKeeper
Many files:
Removed "MySQL Finland AB & TCX DataKonsult AB" from copyright header
Adjusted year(s) in copyright header
Many files:
Added GPL copyright text
Removed files:
Docs/Support/colspec-fix.pl
Docs/Support/docbook-fixup.pl
Docs/Support/docbook-prefix.pl
Docs/Support/docbook-split
Docs/Support/make-docbook
Docs/Support/make-makefile
Docs/Support/test-make-manual
Docs/Support/test-make-manual-de
Docs/Support/xwf
- Removed not used variables and functions
- Added #ifdef around code that is not used
- Renamed variables and functions to avoid conflicts
- Removed some not used arguments
Fixed some class/struct warnings in ndb
Added define IS_LONGDATA() to simplify code in libmysql.c
I did run gcov on the changes and added 'purecov' comments on almost all lines that was not just variable name changes
The problem is that the GEOMETRY NOT NULL can't automatically set
any value as a default one. We always tried to complete LOAD DATA
command even if there's not enough data in file. That doesn't work
for GEOMETRY NOT NULL. Now Field_*::reset() returns an error sign
and it's checked in mysql_load()
Note: bug#21726 does not directly apply to 4.1, as it doesn't have stored
procedures. However, 4.1 had some bugs that were fixed in 5.0 by the
patch for bug#21726, and this patch is a backport of those fixes.
Namely, in 4.1 it fixes:
- LAST_INSERT_ID(expr) didn't return value of expr (4.1 specific).
- LAST_INSERT_ID() could return the value generated by current
statement if the call happens after the generation, like in
CREATE TABLE t1 (i INT AUTO_INCREMENT PRIMARY KEY, j INT);
INSERT INTO t1 VALUES (NULL, 0), (NULL, LAST_INSERT_ID());
- Redundant binary log LAST_INSERT_ID_EVENTs could be generated.
Non-upper-level INSERTs (the ones in the body of stored procedure,
stored function, or trigger) into a table that have AUTO_INCREMENT
column didn't affected the result of LAST_INSERT_ID() on this level.
The problem was introduced with the fix of bug 6880, which in turn was
introduced with the fix of bug 3117, where current insert_id value was
remembered on the first call to LAST_INSERT_ID() (bug 3117) and was
returned from that function until it was reset before the next
_upper-level_ statement (bug 6880).
The fix for bug#21726 brings back the behaviour of version 4.0, and
implements the following: remember insert_id value at the beginning
of the statement or expression (which at that point equals to
the first insert_id value generated by the previous statement), and
return that remembered value from LAST_INSERT_ID() or @@LAST_INSERT_ID.
Thus, the value returned by LAST_INSERT_ID() is not affected by values
generated by current statement, nor by LAST_INSERT_ID(expr) calls in
this statement.
Version 5.1 does not have this bug (it was fixed by WL 3146).
In 5.0 we made LOAD DATA INFILE autocommit in all engines, while
only NDB wanted that. Users and trainers complained that it affected
InnoDB and was a change compared to 4.1 where only NDB autocommitted.
To revert to the behaviour of 4.1, we move the autocommit logic out of mysql_load() into
ha_ndbcluster::external_lock().
The result is that LOAD DATA INFILE commits all uncommitted changes
of NDB if this is an NDB table, its own changes if this is an NDB
table, but does not affect other engines.
Note: even though there is no "commit the full transaction at end"
anymore, LOAD DATA INFILE stays disabled in routines (re-entrency
problems per a comment of Pem).
Note: ha_ndbcluster::has_transactions() does not give reliable results
because it says "yes" even if transactions are disabled in this engine...
SELECT right instead of INSERT right was required for an insert into to a view.
This wrong behaviour appeared after the fix for bug #20989. Its intention was
to ask only SELECT right for all tables except the very first for a complex
INSERT query. But that patch has done it in a wrong way and lead to asking
a wrong access right for an insert into a view.
The setup_tables_and_check_access() function now accepts two want_access
parameters. One will be used for the first table and the second for other
tables.
NDB table".
SQL-layer was not marking fields which were used in triggers as such. As
result these fields were not always properly retrieved/stored by handler
layer. So one might got wrong values or lost changes in triggers for NDB,
Federated and possibly InnoDB tables.
This fix solves the problem by marking fields used in triggers
appropriately.
Also this patch contains the following cleanup of ha_ndbcluster code:
We no longer rely on reading LEX::sql_command value in handler in order
to determine if we can enable optimization which allows us to handle REPLACE
statement in more efficient way by doing replaces directly in write_row()
method without reporting error to SQL-layer.
Instead we rely on SQL-layer informing us whether this optimization
applicable by calling handler::extra() method with
HA_EXTRA_WRITE_CAN_REPLACE flag.
As result we no longer apply this optimzation in cases when it should not
be used (e.g. if we have on delete triggers on table) and use in some
additional cases when it is applicable (e.g. for LOAD DATA REPLACE).
Finally this patch includes fix for bug#20728 "REPLACE does not work
correctly for NDB table with PK and unique index".
This was yet another problem which was caused by improper field mark-up.
During row replacement fields which weren't explicity used in REPLACE
statement were not marked as fields to be saved (updated) so they have
retained values from old row version. The fix is to mark all table
fields as set for REPLACE statement. Note that in 5.1 we already solve
this problem by notifying handler that it should save values from all
fields only in case when real replacement happens.
The check for view security was lacking several points :
1. Check with the right set of permissions : for each table ref that
participates in a view there were the right credentials to use in it's
security_ctx member, but these weren't used for checking the credentials.
This makes hard enforcing the SQL SECURITY DEFINER|INVOKER property
consistently.
2. Because of the above the security checking for views was just ruled out
in explicit ways in several places.
3. The security was checked only for the columns of the tables that are
brought into the query from a view. So if there is no column reference
outside of the view definition it was not detecting the lack of access to
the tables in the view in SQL SECURITY INVOKER mode.
The fix below tries to fix the above 3 points.
A table with an on insert trigger was reported as crashed when the insert
was processed with bulk insert mode on (handler::start_bulk_insert).
The trigger was also selecting from the same table, and that caused
the "crash".
The same problem was present when an insert statement, which was processed
in bulk mode, also used a stored function that was reading the same table.
This fix disables bulk inserts if a statement uses functions or invokes
triggers. Implementing more granular checks will require much more code and
therefore can hardly be done in 5.0
Bug #17158 load data infile of char values into table of char with no (PK) fails to load
Bug #17081 Doing "LOAD DATA INFILE" directly after delete can cause missing data
Problem #1: INSERT...SELECT, Version for 5.0.
Extended the unique table check by a check of lock data.
Merge sub-tables cannot be detected by doing name checks only.
Bad examples of usage of a string with its length fixed.
The incorrect length in the trigger file configuration descriptor
fixed (BUG#14090).
A hook for unknown keys added to the parser to support old .TRG files.
