The COM_MULTI did not take off. No connector is using it.
Remove related code from server, and client.
If anything it is a step simplification of already-bloated
dispatch_command(), and related code.
Support for galera GTID consistency thru cluster. All nodes in cluster
should have same GTID for replicated events which are originating from cluster.
Cluster originating commands need to contain sequential WSREP GTID seqno
Ignore manual setting of gtid_seq_no=X.
In master-slave scenario where master is non galera node replicated GTID is
replicated and is preserved in all nodes.
To have this - domain_id, server_id and seqnos should be same on all nodes.
Node which bootstraps the cluster, to achieve this, sends domain_id and
server_id to other nodes and this combination is used to write GTID for events
that are replicated inside cluster.
Cluster nodes that are executing non replicated events are going to have different
GTID than replicated ones, difference will be visible in domain part of gtid.
With wsrep_gtid_domain_id you can set domain_id for WSREP cluster.
Functions WSREP_LAST_WRITTEN_GTID, WSREP_LAST_SEEN_GTID and
WSREP_SYNC_WAIT_UPTO_GTID now works with "native" GTID format.
Fixed galera tests to reflect this chances.
Add variable to manually update WSREP GTID seqno in cluster
Add variable to manipulate and change WSREP GTID seqno. Next command
originating from cluster and on same thread will have set seqno and
cluster should change their internal counter to it's value.
Behavior is same as using @@gtid_seq_no for non WSREP transaction.
This is 10.4 version.
Idea is to create monitor thread for both donor and joiner that will
periodically if needed extend systemd timeout while SST is being
processed. In 10.4 actual SST is executed by running SST script
and exchanging messages on pipe using blocking fgets. This fix
starts monitoring thread before SST script is started and
we stop monitoring thread when SST has been completed.
MariaDB 10.4 was crashing when thread-handling was set to
pool-of-threads and wsrep was enabled.
There were two apparent reasons for the crash:
- Connection handling in threadpool_common.cc was missing calls to
control wsrep client state.
- Thread specific storage which contains thread variables (THR_KEY_mysys)
was not handled appropriately by wsrep patch when pool-of-threads
was configured.
This patch addresses the above issues in the following way:
- Wsrep client state open/close was moved in thd_prepare_connection() and
end_connection() to have common handling for one-thread-per-connection
and pool-of-threads.
- Thread local storage handling in wsrep patch was reworked by introducing
set of wsrep_xxx_threadvars() calls which replace calls to
THD store_globals()/reset_globals() and deal with thread handling
specifics internally.
Wsrep-lib was updated to version which relaxes internal concurrency
related sanity checks.
Rollback code from wsrep_rollback_process() was extracted to separate calls
for better readability.
Post rollback thread was removed as it was completely unused.
After applying MDEV-18863, in some test configurations, SST
may fails due to duplication of some parameters (in particular
"--port") in the main part of the command line and after
"--mysqld-args", as well as due to incorrect interpretation
of the parameter "--port" passed after "--mysqld-args" when
the SST script is invoked without explicitly specifying a port
for SST. In addition, it is necessary to correctly handle spaces,
quotation marks and special characters when copying original
arguments from the argv[] array to a new command line (after
"--mysqld-args"). This patch resolves these shortcomings.
The MDEV-20265 commit e746f451d5
introduces DBUG_ASSERT(right_op == r_tbl) in
st_select_lex::add_cross_joined_table(), and that assertion would
fail in several tests that exercise joins. That commit was skipped
in this merge, and a separate fix of MDEV-20265 will be necessary in 10.4.
Problem was that wsrep thread argument was deleted on wrong
place. Furthermore, scan method incorrectly used unsafe c_ptr().
Finally, fixed wsrep thread initialization to correctly set
up thread_id and pass correct argument to functions and
fix signess problem causing compiler errors.
For MDEV-15955, the fix in create_tmp_field_from_item() would cause a
compilation error. After a discussion with Alexander Barkov, the fix
was omitted and only the test case was kept.
In 10.3 and later, MDEV-15955 is fixed properly by overriding
create_tmp_field() in Item_func_user_var.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Some users and some scripts (for example, mysqld_multi.sh) use special
option groups with names like [mysqld1], [mysqld2], ..., [mysqldN].
But SST scripts can't currently fully support these option groups.
The only option group-related value it gets from the server is
--defaults-group-suffix, if that option was set for mysqld when
the server was started.
However, the SST scripts does not get told by the server to read
these option groups, so this means that the SST script will fail
to read options like innodb-data-home-dir when it is in a option
group like [mysqld1]...[mysqldN].
Moreover, SST scripts ignore many parameters that can be passed
to them explicitly and cannot transfer them further, for example,
to the input of mariabackup utility. Ideally, we want to transfer
all the parameters of the original mysqld call to utilities such
as mariabackup, however the SST script does not receive these
parameters from the server and therefore cannot transfer them to
mariabackup.
To correct these shortcomings, we need to transfer to the scripts
all of the parameters of the original mysqld call, and in the SST
scripts themselves provide for the transfer all of these parameters
to utilities such as mariabackup. To prevent these parameters from
mixing with the script's own parameters, they should be transferred
to SST script after the special option "--mysqld-args", followed by
the string argument with the original parameters, as it received by
the mysqld call at the time of launch (further all these parameters
will be passed to mariabackup, for example).
In addition, the SST scripts themselves must be refined so that
they can read the parameters from the user-selected group, not just
from the global mysqld configuration group. And also so that they
can receive the parameters (which important for their work) as
command-line arguments.
Galera threads were not registered to performance schema and
used pthread_create when mysql_thread_create should have been
used.
Added test case to verify current galera performance schema
instrumentation does work.
now we can afford it. Fix -Werror errors. Note:
* old gcc is bad at detecting uninit variables, disable it.
* time_t is int or long, cast it for printf's
When node is JOINER and bin-log is enabled but bin-log-index is not set in configuration, we use NULL pointer which causes segfault.
Fixed by checking for NULL pointer before using variable.
* Donor node will now provide binlog-index argument to wsrep_sst_rsync script if binlog is used.
* Write correct path and binlog file names into joiner binlog-index file
The second line of changes related to replacing xtrabackup with
mariabackup:
1) All unnecessary references to xtrabackup are removed from
the documentation, from some comments, from the control files
that are used to prepare the packages.
2) Made corrections of the tests from the galera_3nodes suite
that mentioned xtrabackup or the old (associated with xtrabackup)
version of innobackupex.
3) Fixed flaws in the galera_3nodes mtr suite control scripts,
because of which they could not work with mariabackup.
4) Fixed numerous bugs in the SST scripts and in the mtr test
files (galera_3nodes mtr suite) that prevented the use of Galera
with IPv6 addresses.
5) Fixed flaws in tests for rsync and mysqldump (for galera_3nodes
mtr tests suite). These tests were not performed successfully without
these fixes.
https://jira.mariadb.org/browse/MDEV-17835
The use of the xtrabackup and xtrabackup-v2 methods for SST
has been declared obsolete since version 10.2, now it cannot
be used because of the different redo log format. Accordingly,
we need to remove the xtrabackup-related scripts and dynamically
replace the call to xtrabackup[-v2] to the mariabackup (with a
corresponding warning in the log) when the server performs SST.
https://jira.mariadb.org/browse/MDEV-17835
Problem was that in SST log_bin_index name and directory was not
handled and passed to rsync SST script.
wsrep_sst_common.sh
Read binlog index dirname and filename if --binlog-index
parameter is provided. Read binlog filenames from that file
from donor and write transfered binlog filenames to that
file in joiner.
mysqld.cc, mysqld.h
Moved opt_binlog_index_name from static to global and added
it to extern.
wsrep_sst.cc
generate_binlog_index_opt_val
New function to generate binlog index name if opt_binlog_index_name is
given on configuration.
sst_prepare_other
Add binlog index configuration to SST command.
wsrep_sst.h
Add new SST parameter --binlog-index
Add test case.
extra/mariabackup/fil_cur.cc:361:42: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
extra/mariabackup/fil_cur.cc:376:9: warning: format specifies type 'unsigned long' but the argument has type 'ib_int64_t' (aka 'long long') [-Wformat]
sql/handler.cc:6196:45: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
sql/log.cc:1681:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/log.cc:1687:16: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
sql/wsrep_sst.cc:1388:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
sql/wsrep_sst.cc:232:86: warning: format specifies type 'long' but the argument has type 'wsrep_seqno_t' (aka 'long long') [-Wformat]
storage/connect/filamdbf.cpp:450:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/filamdbf.cpp:970:47: warning: format specifies type 'short' but the argument has type 'int' [-Wformat]
storage/connect/inihandl.cpp:197:16: warning: address of array 'key->name' will always evaluate to 'true' [-Wpointer-bool-conversion]
storage/innobase/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/buf/buf0buf.cc:5085:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/innobase/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/handler/ha_innodb.cc:18685:7: warning: format specifies type 'unsigned long' but the argument has type 'wsrep_trx_id_t' (aka 'unsigned long long') [-Wformat]
storage/innobase/row/row0mysql.cc:3319:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/innobase/row/row0mysql.cc:3327:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/maria/ma_norec.c:35:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_norec.c:42:10: warning: implicit conversion from 'int' to 'my_bool' (aka 'char') changes value from 131 to -125 [-Wconstant-conversion]
storage/maria/ma_test2.c:1009:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/maria/ma_test2.c:1010:12: warning: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Wformat]
storage/mroonga/ha_mroonga.cpp:9189:44: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand]
storage/mroonga/vendor/groonga/lib/expr.c:4987:22: warning: comparison of constant -1 with expression of type 'grn_operator' is always false [-Wtautological-constant-out-of-range-compare]
storage/xtradb/btr/btr0scrub.cc:151:17: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/buf/buf0buf.cc:5047:8: warning: nonnull parameter 'bpage' will evaluate to 'true' on first encounter [-Wpointer-bool-conversion]
storage/xtradb/fil/fil0crypt.cc:2454:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3324:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
storage/xtradb/row/row0mysql.cc:3332:5: warning: format specifies type 'long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:120:35: warning: format specifies type 'unsigned long' but the argument has type 'int' [-Wformat]
unittest/sql/mf_iocache-t.cc:96:35: note: expanded from macro 'INFO_TAIL'
