Added more DBUG statements
Ensure that we are comparing end space with BINARY strings
Use 'any_db' instead of '' to mean any database. (For HANDLER command)
Only strip ' ' when comparing CHAR, not other space-like characters (like \t)
reset errors (in thd) before executing the event. Otherwise if an event is ignored
because of replicate-*-table rules (error ER_SLAVE_IGNORED_TABLE) this error code
may remain in thd->net and the next event may pick it.
"EE_ error codes (EE_DELETE, EE_WRITE) end up in the binlog, making slave stop".
The problem was that during execution of the command on the master, an error
can occur (for example, not space left on device, then mysqld waits and when
there is space it completes successfully: so finally it worked but the error
EE_WRITE remains in thd->net.last_errno and thd->net.last_error).
To know if finally the command succeeded, we test the 'error' variable in
every place, and if it shows no failure we reset thd->net.last_err* using
the function THD::clear_error() which is backported from 4.1.
A new test to see if now only real errors get to the binlog (note: the test
uses "rm").
Also a bit of memory free/alloc saving in log_event.cc (do not free the whole
mem_root after every query in the slave SQL thread: we can keep the initial
block of it; which will be freed when the thread terminates).
The constructor of Rotate_log_event used when we are rotating our binlog or
relay log, should not assume that there is a nonzero THD available.
For example, when we are reacting to SIGHUP, the THD is 0.
In fact we don't need to use the THD in this constructor;
we can do like for Stop_log_event, and use the minimal Log_event
constructor.
If we were allowed to put Unix-specific commands in the testsuite,
I'd add a test for this (<sigh>).
- when we don't have in_addr_t, use uint32.
- a forgotten initialization of slave_proxy_id in sql/log_event.cc (was not really "forgot", was
"we needn't init it there", but there was one case where we needed...).
- made slave_proxy_id always meaningful in THD and Log_event, so we can
rely more on it (no need to test if it's meaningful). THD::slave_proxy_id
is equal to THD::thread_id except for the slave SQL thread.
- clean up the slave's temporary table (i.e. free their memory) when slave
server shuts down.
"If 2 master threads with same-name temp table, slave makes bad binlog"
and (two birds with one stone) for
BUG#1240 "slave of slave breaks when STOP SLAVE was issud on parent slave
and temp tables".
Here is the design change:
in a slave running with --log-slave-updates, events are now logged with the
thread id they had on the master. So no more id conflicts between master threads,
but introduces id conflicts between one master thread and one normal
client thread connected to the slave. This is solved by storing the server id
in the temp table's name.
New test which requires mysql-test-run to be run with --manager,
otherwise it will be skipped.
Undoing a Monty's change (hum, a chill runs down my spine ;) which was
"Cleanup temporary tables when slave ends" in ChangeSet 1.1572.1.1.
query_alloc_block_size, query_prealloc_size, range_alloc_block_size,transaction_alloc_block_size and transaction_prealloc_size
Add more checks for "out of memory" detection in range optimization
"Add a column "Timestamp_of_last_master_event_executed" in SHOW SLAVE STATUS".
Finally this is adding
- Slave_IO_State (a copy of the State column of SHOW PROCESSLIST for the I/O thread,
so that the users, most of the time, has enough info with only SHOW SLAVE STATUS).
- Seconds_behind_master. When the slave connects to the master it does SELECT UNIX_TIMESTAMP()
on the master, computes the absolute difference between the master's and the slave's clock.
It records the timestamp of the last event executed by the SQL thread, and does a
small computation to find the number of seconds by which the slave is late.
Rotate_log_event::exec_event() believed that the relay log was corrupted. Fixed it
by moving the test for corruption to Start_log_event::exec_event().
Changed Rotate_log_event::exec_event() to not increment positions when the
event is seen in the middle of a transaction.
I did a separate commit in 4.1 (so this should not be merged to 4.0) because
code is a bit different in 4.1.
A test to see if the slave detects when the master died while writing a
transaction to the binlog (uses a forged truncated binlog I made).
Add quoting for use `database` for mysqlbinlog
Removed test ins0000001
Add support for --replace for exec in mysqltest
Don't refer to install dir in mysqlbinlog.result
Don't free the client's selected db (thd->db) when it has been DROPped,
if this is a slave thread; the x_free() was causing a lot
of various bugs in rpl_loaddata_rule_m (garbage characters, segfault, hangs in
other threads).
A small post-merge fix (rli->inside_transaction exists in 4.0 only).
Bug #1392 "On Win, slave leaves one temp file after successf. replicating LOAD DATA INFILE"
Windows-specific bug (we forgot to close a file before deleting it).
Patch written by me, tested by Miguel (thanks!) and it works.
when the SQL thread stops, set rli->inside_transaction to 0. This is needed if the user
later restarts replication from a completely different place where there are only autocommit
statements.
* Detect the case where the master died while flushing the binlog cache to the binlog
and stop with error. Cannot add a testcase for this in 4.0 (I tested it manually)
as the slave always runs with --skip-innodb.
fix for BUG#1113 "INSERT into non-trans table SELECT ; ROLLBACK" does not send warning"
and
fix for BUG#873 "In transaction, INSERT to non-trans table is written too early to binlog".
Now we don't always write the non-trans update immediately to the binlog;
if there is something in the binlog cache we write it to the binlog cache
(because the non-trans update could depend on a trans table which was modified
earlier in the transaction); then in case of ROLLBACK, we write the binlog
cache to the binlog, wrapped with BEGIN/ROLLBACK.
This guarantees that the slave does the same updates.
For ROLLBACK TO SAVEPOINT: when we execute a SAVEPOINT command we write it
to the binlog cache. At ROLLBACK TO SAVEPOINT, if some non-trans table was updated,
we write ROLLBACK TO SAVEPOINT to the binlog cache; when the transaction
terminates (COMMIT/ROLLBACK), the binlog cache will be flushed to the binlog
(because of the non-trans update) so we'll have SAVEPOINT and ROLLBACK TO
SAVEPOINT in the binlog.
Apart from this rare case of updates of mixed table types in transaction, the
usual way is still clear the binlog cache at ROLLBACK, or chop it at
ROLLBACK TO SAVEPOINT (meaning the SAVEPOINT command is also chopped, which
is fine).
Note that BUG#873 encompasses subbugs 1) and 2) of BUG#333 "3 binlogging bugs when doing INSERT with mixed InnoDB/MyISAM".
"LOAD DATA INFILE is badly filtered by binlog-*-db rules".
There will probably be a second final one to merge Dmitri's changes
to rpl_log.result and mine.
2 new tests:
rpl_loaddata_rule_m : test of logging of LOAD DATA INFILE when the master has binlog-*-db rules,
rpl_loaddata_rule_s : test of logging of LOAD DATA INFILE when the slave has binlog-*-db rules and --log-slave-updates.
log-slave-updates since this causes unexpected values in
Exec_master_log_pos in A->B->C replication setup, synchronization
problems in master_pos_wait()...
Still this brokes some functionality in sql/repl_failsafe.cc
(but this file is not used now)
the first 4 bytes of the relay log. Indeed comments in mysys/mf_iocache.c
say we must always use my_b_append for such a cache.
This *could* avoid a very rare assertion failure which is:
030524 19:32:38 Slave SQL thread initialized, starting replication in log 'FIRST' at position 0, relay log '/
users/gbichot/4.1.1/mysql-test/var/log/slave-relay-bin.000001' position: 4
030524 19:32:38 next log '/users/gbichot/4.1.1/mysql-test/var/log/slave-relay-bin.000002' is currently active
mysqld: mf_iocache.c:701: _my_b_seq_read: Assertion `pos_in_file == info->end_of_file' failed.
and which seemed to happen always when the SQL thread and/or the I/O thread
were at position 4 in a relay log.
I extended the task to cleaning error messages, making them look nicer,
and making the output of SHOW SLAVE STATUS (column Last_error) be as complete
as what's printed on the .err file;
previously we would have, for a failure of a replicated LOAD DATA INFILE:
- in the .err, 2 lines:
"duplicate entry 2708 for key 1"
"failed loading SQL_LOAD-5-2-2.info"
- and in SHOW SLAVE STATUS, only:
"failed loading SQL_LOAD-5-2-2.info".
Now SHOW SLAVE STATUS will contain the concatenation of the 2 messages.
